Canon Ir 2200 User Guide

							Adjusting the Machine (Adjustment/Cleaning)3-41
3-413-41 3-41
3
33 3
Selecting and Storing Settings to Suit your Needs
3
33 3Press “Done.”
Press “Done.”Press “Done.” Press “Done.”
Repeat this procedure.
The specified mode is set and the display returns to the Basic Features screen.
Changing the Saddle Stitch Position
Changing the Saddle Stitch PositionChanging the Saddle Stitch Position Changing the Saddle Stitch Position
When the Saddle Finisher-G1 is attached, slight position differences in the saddle stitch position 
may occur. With this function you can compensate for such differences.
IMPORTANT
•
•• •This function can only be set when the Saddle Finisher-G1 is attached.
1
11 1Call up the desired screen as follows:
Call up the desired screen as follows:Call up the desired screen as follows: Call up the desired screen as follows:
2
22 2Select the paper size for which you want to change the saddle stitch position.
Select the paper size for which you want to change the saddle stitch position.Select the paper size for which you want to change the saddle stitch position. Select the paper size for which you want to change the saddle stitch position.
NOTE
•
•• •Some of the paper sizes displayed may not be available in certain countries.
;ownloadedyfromyXanuals'rinterScomyXanuals 
						

							Adjusting the Machine (Adjustment/Cleaning)3-42
3-423-42 3-42
3
33 3
Selecting and Storing Settings to Suit your Needs
3
33 3Use “
Use “Use “ Use “t” or “
” or “” or “ ” or “s” to adjust the saddle stitch position, and press “OK.”
” to adjust the saddle stitch position, and press “OK.”” to adjust the saddle stitch position, and press “OK.” ” to adjust the saddle stitch position, and press “OK.”
The setting range is from –2.0mm to +2.0mm, in 0.25mm increments.
4
44 4Press “Done.”
Press “Done.”Press “Done.” Press “Done.”
Repeat this procedure.
The specified mode is set and the display returns to the Basic Features screen.
Adjusting the Standard Exposure
Adjusting the Standard ExposureAdjusting the Standard Exposure Adjusting the Standard Exposure
Adjusts the exposure adjustment scale to calibrate differences in exposure. Perform this 
adjustment if differences between the image in the original and the print occur with the exposure 
scale set in the middle.
NOTE
•
•• •The default setting is in the middle on a scale of 1 to 9.
1
11 1Call up the desired screen as follows:
Call up the desired screen as follows:Call up the desired screen as follows: Call up the desired screen as follows:
;ownloadedyfromyXanuals'rinterScomyXanuals 
						

							Adjusting the Machine (Adjustment/Cleaning)3-43
3-433-43 3-43
3
33 3
Selecting and Storing Settings to Suit your Needs
2
22 2Press “Light” or “Dar k” to adjust the exposure, and press “OK.”
Press “Light” or “Dar k” to adjust the exposure, and press “OK.”Press “Light” or “Dar k” to adjust the exposure, and press “OK.” Press “Light” or “Dar k” to adjust the exposure, and press “OK.”
3
33 3Press “Done.”
Press “Done.”Press “Done.” Press “Done.”
Repeat this procedure.
The specified mode is set and the display returns to the Basic Features screen.
Setting Staple/Offset to ON/OFF
Setting Staple/Offset to ON/OFFSetting Staple/Offset to ON/OFF Setting Staple/Offset to ON/OFF
If the service call message containing an error code shown below appears, be sure to turn the 
main power switch ON again. After that, if the same message appears when paper is output, 
contact your service representative. Follow the procedure shown below if the service 
representative asks you to set Staple/Offset to ON/OFF. 
• E000500-000
• E000514-000
• E000530-000
• E000531-000
• E000577-000
• E000580-000
• E000585-000
NOTE
•
•• •This setting is available only when Finisher-J1 is attached.
•
•• •The default setting is “On”
1
11 1Call up the desired screen as follows:
Call up the desired screen as follows:Call up the desired screen as follows: Call up the desired screen as follows:
(Additional Functions)
;ownloadedyfromyXanuals'rinterScomyXanuals 
						

							Adjusting the Machine (Adjustment/Cleaning)3-44
3-443-44 3-44
3
33 3
Selecting and Storing Settings to Suit your Needs
2
22 2Select “On” or “Off,”and press “OK.”
Select “On” or “Off,”and press “OK.”Select “On” or “Off,”and press “OK.” Select “On” or “Off,”and press “OK.”
To disable Staple/Offset, press “Off.”
To enable Staple/Offset, press “On.”
3
33 3Press “Done.”
Press “Done.”Press “Done.” Press “Done.”
Repeat this procedure.
The specified mode is set and the display returns to the Basic Features screen.
4
44 4Tur n the main power switch off. Allow at least 3 seconds, before tur ning the 
Tur n the main power switch off. Allow at least 3 seconds, before tur ning the Tur n the main power switch off. Allow at least 3 seconds, before tur ning the  Tur n the main power switch off. Allow at least 3 seconds, before tur ning the 
main power switch back on.
main power switch back on.main power switch back on. main power switch back on.
;ownloadedyfromyXanuals'rinterScomyXanuals 
						

							Printing Reports (Report Settings)3-45
3-453-45 3-45
Selecting and Storing Settings to Suit your Needs
3
33 3
Printing Repor ts 
Printing Repor ts Printing Repor ts  Printing Repor ts (Repor t Settings)
(Repor t Settings)(Repor t Settings) (Repor t Settings)
You can print the contents of the fax, network, and the printer settings. These reports are useful 
when you check the current settings.
NOTE
•
•• •“Report Settings” is displayed only when any of Network Interface Adapter, Printer Kit and FAX 
Board is attached.
Printing the Contents of the Fax Settings
Printing the Contents of the Fax SettingsPrinting the Contents of the Fax Settings Printing the Contents of the Fax Settings
You can print the lists of the Address Book List 1 and 2, the Group Destination List, and the 
User's Data. The following is an example of printing a list of the Address Book List 1.
1
11 1Call up the desired screen as follows:
Call up the desired screen as follows:Call up the desired screen as follows: Call up the desired screen as follows:
2
22 2Press “Fax” under .
Press “Fax” under .Press “Fax” under . Press “Fax” under .
“Network” is displayed only when the Network Interface Adapter is attached.
“Printer” is displayed only when the Printer Kit is attached.
(Additional Functions)
;ownloadedyfromyXanuals'rinterScomyXanuals 
						

							Printing Reports (Report Settings)3-46
3-463-46 3-46
3
33 3
Selecting and Storing Settings to Suit your Needs
3
33 3Press “Address Book List 1.”
Press “Address Book List 1.”Press “Address Book List 1.” Press “Address Book List 1.”
4
44 4Press “Yes.”
Press “Yes.”Press “Yes.” Press “Yes.”
If you do not want to print, press “No.”
The screen below appears, and printing starts.
When printing is completed,  appears.
To close the screen while printing, press “Done.”
NOTE
•
•• •To cancel printing, press “Cancel.”
;ownloadedyfromyXanuals'rinterScomyXanuals 
						

							Printing Reports (Report Settings)3-47
3-473-47 3-47
3
33 3
Selecting and Storing Settings to Suit your Needs
5
55 5Press “Done.”
Press “Done.”Press “Done.” Press “Done.”
Repeat this procedure.
The specified mode is set and the display returns to the Basic Features screen.
Printing the User’s Data List in the Network Settings
Printing the User’s Data List in the Network SettingsPrinting the User’s Data List in the Network Settings Printing the User’s Data List in the Network Settings
You can print the user’s data list in the Network Settings when the Network Interface Adapter is 
attached.
1
11 1Call up the desired screen as follows:
Call up the desired screen as follows:Call up the desired screen as follows: Call up the desired screen as follows:
2
22 2Press “Network” under .
Press “Network” under .Press “Network” under . Press “Network” under .
When both the Fax Board and Printer Kit are not attached, and the Network Interface Adapter is 
attached, this procedure is not necessary.
When the Network Interface 
When the Network Interface When the Network Interface  When the Network Interface 
Adapter and Printer Kit are 
Adapter and Printer Kit are Adapter and Printer Kit are  Adapter and Printer Kit are 
attached
attachedattached attachedWhen the FAX Board, Network 
When the FAX Board, Network When the FAX Board, Network  When the FAX Board, Network 
Interface Adapter, and Printer Kit 
Interface Adapter, and Printer Kit Interface Adapter, and Printer Kit  Interface Adapter, and Printer Kit 
are attached
are attachedare attached are attached
;ownloadedyfromyXanuals'rinterScomyXanuals 
						

							Printing Reports (Report Settings)3-48
3-483-48 3-48
3
33 3
Selecting and Storing Settings to Suit your Needs
3
33 3Press “User’s Data List.”
Press “User’s Data List.”Press “User’s Data List.” Press “User’s Data List.”
4
44 4Press “Yes.”
Press “Yes.”Press “Yes.” Press “Yes.”
If you do not want to print, press “No.”
The screen below appears, and printing starts.
When printing is completed,  appears.
To close the screen while printing, press “Done.”
NOTE
•
•• •To cancel printing, press “Cancel.”
;ownloadedyfromyXanuals'rinterScomyXanuals 
						

							Printing Reports (Report Settings)3-49
3-493-49 3-49
3
33 3
Selecting and Storing Settings to Suit your Needs
5
55 5Press “Done.”
Press “Done.”Press “Done.” Press “Done.”
Repeat this procedure.
The specified mode is set and the display returns to the Basic Features screen.
Printing the Contents of the Printer Settings
Printing the Contents of the Printer SettingsPrinting the Contents of the Printer Settings Printing the Contents of the Printer Settings
When the Printer Kit is attached, you can print the contents of the printer setting.
1
11 1Call up the desired screen as follows:
Call up the desired screen as follows:Call up the desired screen as follows: Call up the desired screen as follows:
2
22 2Press “Printer” under .
Press “Printer” under .Press “Printer” under . Press “Printer” under .
3
33 3Select the type of repor t you want to print.
Select the type of repor t you want to print.Select the type of repor t you want to print. Select the type of repor t you want to print.
When the Network Interface 
When the Network Interface When the Network Interface  When the Network Interface 
Adapter and Printer Kit are 
Adapter and Printer Kit are Adapter and Printer Kit are  Adapter and Printer Kit are 
attached
attachedattached attachedWhen the FAX Board, Networ k 
When the FAX Board, Networ k When the FAX Board, Networ k  When the FAX Board, Networ k 
Interface Adapter, and Printer Kit 
Interface Adapter, and Printer Kit Interface Adapter, and Printer Kit  Interface Adapter, and Printer Kit 
are attached
are attachedare attached are attached
;ownloadedyfromyXanuals'rinterScomyXanuals 
						

							Printing Reports (Report Settings)3-50
3-503-50 3-50
3
33 3
Selecting and Storing Settings to Suit your Needs
4
44 4Press “Yes.”
Press “Yes.”Press “Yes.” Press “Yes.”
If you do not want to print, press “No.”
When printing is completed, the screen returns to step 3.
5
55 5Press “Done.”
Press “Done.”Press “Done.” Press “Done.”
Repeat this procedure.
The specified mode is set and the display returns to the Basic Features screen.
;ownloadedyfromyXanuals'rinterScomyXanuals