Xerox Phaser 6115MFP User Manual
Have a look at the manual Xerox Phaser 6115MFP User Manual online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 228 Xerox manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.
Moving the Product Phaser® 6115MFP Multifunction Product 10-4 Moving the Product Note:Remove Tray 2, if installed, before lifting the product. ■Always turn the product off and disconnect the power cord from the back of the product. ■Make sure two people are available to lift the product when moving it. ■Keep the product level to avoid toner spillage. ■When lifting the product, grasp the areas as shown in the figure. 6115-042 32 kg 70.5 lbs Downloaded From ManualsPrinter.com Manuals
Moving the Product Phaser® 6115MFP Multifunction Product 10-5 Cleaning the Exterior Caution:Turn off the product and unplug the power cord before cleaning, and always use a soft, lint-free, dry cloth. Control Panel Ventilation Grill Exterior Filter 6115-043 6115-044 6115-0456115-046 Downloaded From ManualsPrinter.com Manuals
Moving the Product Phaser® 6115MFP Multifunction Product 10-6 Cleaning the Original Glass and Cover Pad Original Glass Original Cover Pad 6115-0476115-095 Downloaded From ManualsPrinter.com Manuals
Moving the Product Phaser® 6115MFP Multifunction Product 10-7 Cleaning the Media Feed Roller and Laser Lens 1.Ensure the document feeder is closed, release the scanner lever, and then lift the scanner unit. 2.Remove any media and close the output bin. 6115-021 6115-083 6115-103 6115-087 Downloaded From ManualsPrinter.com Manuals
Moving the Product Phaser® 6115MFP Multifunction Product 10-8 3.Pull the lever and open the top cover. Caution:Do not touch the transfer belt. 4.Remove the imaging unit. Caution:Place the imaging unit on a clean, level surface as shown below. The imaging unit cannot be exposed for more than 15 minutes. Cover the imaging unit with a light proof, dark bag to prevent exposure to direct light. 6115-022 6115-041 6115-128 Downloaded From ManualsPrinter.com Manuals
Moving the Product Phaser® 6115MFP Multifunction Product 10-9 5.Clean the media feed roller and laser lens with a dry, lint-free cloth. 6.Place the imaging unit back in the product. 6115-0486115-049 6115-041 Downloaded From ManualsPrinter.com Manuals
Moving the Product Phaser® 6115MFP Multifunction Product 10-10 7.Close the top cover. 8.Close the scanner unit. 6115-024 6115-025 Downloaded From ManualsPrinter.com Manuals
Moving the Product Phaser® 6115MFP Multifunction Product 10-11 Cleaning the Duplex Feed Rollers 1.Open the duplex unit located on the back of the product. 2.Using a dry, lint-free cloth, clean the duplex feed rollers. 3.Close the duplex unit. 6115-050 6115-051 6115-052 Downloaded From ManualsPrinter.com Manuals
Moving the Product Phaser® 6115MFP Multifunction Product 10-12 Cleaning the Tray 2 Feed Rollers 1.Turn the product off and disconnect the power cord from the back of the product. 2.Using two people, carefully lift the product off Tray 2. 6115-063 6115-053 Downloaded From ManualsPrinter.com Manuals
Moving the Product Phaser® 6115MFP Multifunction Product 10-13 3.Clean the rollers in the tray with a dry, lint-free cloth. 4.Using two people, carefully set the product back on top of Tray 2. 6115-054 6115-071 Downloaded From ManualsPrinter.com Manuals