Xerox Phaser 6115MFP User Manual

							Loading Media
Phaser® 6115MFP Multifunction Product
6-17 12.Carefully close the top cover.
13.Lower the scanner unit.
Caution:When you are finished printing envelopes, be sure to lower the fuser levers on the 
fuser back to their original positions.
6115-024
6115-025
Downloaded From ManualsPrinter.com Manuals 
						

							Loading Media
Phaser® 6115MFP Multifunction Product
6-18
Labels
A sheet of labels consists of a face sheet (the printing surface), adhesive, and a carrier sheet:
■The face sheet must follow the plain paper specification, see Supported Paper and 
Media on page 6-2.
■The face sheet surface must cover the entire carrier sheet, and no adhesive should 
come through on the surface.
■Use label sheets recommended for laser printers.
Do not use label sheets that:
■Have labels that easily peel off or have parts of the label already removed.
■Have backing sheets that have peeled away or have exposed adhesive.
■Are precut or perforated.
Caution:Labels may stick to the fuser, causing them to peel off and create paper jams.
CapacityTr a y  1Up to 50 label sheets, depending on their thickness.
Tr a y  2Not supported; Do not use in Tray 2.
OrientationFac eu p
Driver media typeLabel
Weight
60 to 163 g/m
2 (16 to 43 lb. Bond)
2-sided printingNot supported
Downloaded From ManualsPrinter.com Manuals 
						

							Loading Media
Phaser® 6115MFP Multifunction Product
6-19
Letterhead
Try printing your data on a sheet of plain paper first to check placement.
Use the plain paper specifications for letterhead.
CapacityTr a y  1Up to 50 sheets, depending on their size and thickness.
Tr a y  2Not supported.
OrientationFac e up
Driver media typeLetterhead
Weight
60 to 90 g/m
2 (16 to 24 lb. Bond)
2-sided printingFaceup, top of page enters the printer first.
Downloaded From ManualsPrinter.com Manuals 
						

							Loading Media
Phaser® 6115MFP Multifunction Product
6-20
Transparency
Use the following guidelines when printing on transparencies.
■Do not fan transparencies before loading them. Resulting static electricity may cause 
printing errors.
■If you touch the face of the transparencies with your bare hands, print quality may be 
affected.
■Keep the printer paper path clean. Transparencies are especially sensitive to a dirty 
media path. If there are shadows on either the top or the bottom of the sheets, see 
Product Maintenance on page 10-1.
■Remove transparencies as soon as possible from the output tray to avoid static 
buildup.
■If you have problems feeding 50 sheets, try loading only 1–10 sheets at a time. 
Loading a large number of transparencies at one time may cause static buildup, 
causing feeding problems.
■Always test a small quantity of a particular type of transparency.
You can print continuously with transparencies. However, this could affect feed reliability, 
depending on the media quality, static buildup, and printing environment.
ONLY use transparencies that are Xerox approved, and on the recommended media list for 
your product.
Do not use transparencies that:
■Have static electricity build up, causing them to stick together.
■Are specified for inkjet printers only.
CapacityTr a y  1Up to 50 sheets, depending on their thickness.
Tr a y  2Not supported
OrientationFac eu p
Driver media typeTransparency
2-sided printingNot supported
Downloaded From ManualsPrinter.com Manuals 
						

							Loading Media
Phaser® 6115MFP Multifunction Product
6-21
Glossy Stock
Test all glossy stock to ensure acceptable performance and to ensure that the image does not 
shift on the page.
Do not use glossy stock that is:
■Mixed with any other media in the trays (this will cause the printer to misfeed).
■Specified for inkjet printers only.
Loading Specialty Media
1.Remove the lid from Tray 1.
CapacityTr a y  1Up to 50 glossy sheets, depending on their thickness.
Tr a y  2Not supported; Do not use in Tray 2.
OrientationFac eu p
Driver media typeGlossy 
2-sided printingNot supported
6115-012
Downloaded From ManualsPrinter.com Manuals 
						

							Phaser® 6115MFP Multifunction Product
6-22 2.Open the front panel of the tray, if necessary.
3.Slide apart the media guides to provide more space between them.
4.Load the special media faceup in the tray.
6115-098
6115-013
6115-026
Downloaded From ManualsPrinter.com Manuals 
						

							Loading Media
Phaser® 6115MFP Multifunction Product
6-23 5.Adjust the paper guides to fit the paper loaded in the tray (if necessary).
6.Close the front panel of Tray 1, and then reattach the lid.
6115-027
6115-017
Downloaded From ManualsPrinter.com Manuals 
						

							Guaranteed Imageable (Printable) Area
Phaser® 6115MFP Multifunction Product
6-24
Guaranteed Imageable (Printable) Area
Envelopes
Envelopes have a non guaranteed imageable area that varies with the envelope type. The 
envelope area is determined by your application.
White: Guaranteed printable area
Gray: Non guaranteed area
Nonimageable area: 4 mm (0.157 in.)
Page Margins
Margins are set through your application. Some applications allow you to set custom page 
sizes and margins while others have only standard page sizes and margins from which to 
choose. If you choose a standard format, you may lose part of your image (due to imageable 
area constraints). If you can customize your page in your application, use the applications 
sizes for the imageable area for optimum results. The printable area on all media sizes is up to 4 mm 
(0.157 in.) from the edges of the media.
Each size has a specific imageable area; the maximum 
area on which the printer can print clearly and without 
distortion.
This area is subject to both hardware limits (the 
physical media size and the margins required by the 
printer) and software constraints (the amount of 
memory available). The guaranteed imageable 
(printable) area for all media sizes is the page size 
minus 4 mm (0.157 in.) from all edges of the media.
.
Note:When printing in color on legal-size media, the bottom margin is 10.4 mm 
(0.409 in.) for Cyan, Magenta, and Yellow. When printing on glossy stock, the top 
margin is 10 mm (0.394 in.).
Downloaded From ManualsPrinter.com Manuals 
						

							Options
Phaser® 6115MFP Multifunction Product
6-25
Options
This section includes:
■Loading Paper in Tray 2 on page 6-25
■2-Sided Printing (Duplexing) on page 6-28
Loading Paper in Tray 2
1.Pull Tray 2 out as far as possible. Lift up Tray 2 and remove it.
2.Remove the lid from Tray 2.
6115-028
6115-029
Downloaded From ManualsPrinter.com Manuals 
						

							Options
Phaser® 6115MFP Multifunction Product
6-26 3.Press down the media pressure plate to lock it into place.
4.Load the paper faceup in the tray.
Caution:Do not load paper or media above the fill line indicated on the tray. Overloading 
the tray may cause jams.
6115-030
6115-031
6115-032
Downloaded From ManualsPrinter.com Manuals