Xerox Phaser 6115MFP User Manual

							Options
Phaser® 6115MFP Multifunction Product
6-27 5.Reattach the lid to Tray 2.
6.Reinsert Tray 2 into the printer.
6115-033
6115-034
Downloaded From ManualsPrinter.com Manuals 
						

							Options
Phaser® 6115MFP Multifunction Product
6-28
2-Sided Printing (Duplexing)
2-sided printing can be done manually or can be done automatically with the optional duplex 
unit installed and enabled in the printer driver.
Note:Only plain paper, 60 to 90 g/m
2 (16 to 24 lb. bond) can be auto duplexed. See 
Supported Paper and Media on page 6-2. Duplexing envelopes, labels, transparencies, or 
glossy is not supported.
Ensure the duplex unit is installed and enabled by the printer driver to successfully duplex the 
job. See Using Printer Driver Options on page 5-1 for more information on driver settings.
Check your application to determine how to set your margins for duplex printing. 
The following Binding Position settings are available:
If “Short Edge” is selected, the pages will be laid out to flip at the shortest 
edge of the paper.
If “Long Edge” is selected, the pages will be laid out to flip at the longest 
edge of the paper.
The following order settings are available when “Booklet” is selected:
If “Left Binding” is selected, the pages can be folded as a left-bound booklet.
If “Right Binding” is selected, the pages can be folded as a right-bound 
booklet.
1
3
1
21
111
12
3
1
12
3
3
3
1 12
Downloaded From ManualsPrinter.com Manuals 
						

							Phaser® 6115MFP Multifunction Product
7-1 This chapter includes:
■Basic Copying on page 7-2
■Adjusting Copy Options on page 7-3
■Advanced Copying on page 7-8
Copying
Downloaded From ManualsPrinter.com Manuals 
						

							Basic Copying
Phaser® 6115MFP Multifunction Product
7-2
Basic Copying
User either the Automatic Document Feeder (ADF) or the document glass to make copies. 
Load the originals to be copied and follow the steps below to make copies.
For information on copy settings, see Adjusting Copy Options on page 7-3.
Loading Originals
1.On the control panel, press the Copy button.
2.Specify the copy settings, see Adjusting Copy Options on page 7-3.
3.Specify the number of copies using the control panel keypad. The number of copies 
appears on the upper, right corner of the display.
4.Press the Start-Color button for color copies or Start-B&W button for black and white 
copies.
■If you placed originals in the ADF, copying continues until the document feeder is 
empty.
■To stop copying, press the Stop/Reset button. 
Note:If the Stop/Reset button is pressed while copying 
Press the Start Key To Resume 
appears on the control panel. To continue the copy job, press the Start-Color or Start B&W 
button. 
Document Glass
Lift the ADF cover and place the original 
facedown, towards the back, left corner of the 
document glass as shown.Automatic Document Feeder
Insert originals faceup with the top of the page 
entering the feeder first. Adjust the paper guides 
so they fit against the originals.
6115-074
6115-075
6115-078
Downloaded From ManualsPrinter.com Manuals 
						

							Adjusting Copy Options
Phaser® 6115MFP Multifunction Product
7-3
Adjusting Copy Options
This section includes:
■Setting the Original Document Type on page 7-3
■Setting the Copy Quality on page 7-4
■Setting the Copy Density on page 7-4
■Collating Copies on page 7-5
■Selecting Paper Priority on page 7-6
■Specifying a Zoom Ratio on page 7-7
If you are connected to your product via USB, you can change copy settings through the MFP 
ControlCentre (MCC). For instructions on using the MFP ControlCentre, see the chapter on 
Product Management on page 3-1.
If you are connected to your product over a network, use the control panel to adjust copy 
options.
Note:Pressing the Stop/Reset button returns all settings to their default values.
Setting the Original Document Type
For the best print quality, set the original document type to a mode that most closely matches 
your originals.
To set the original document type:
Using the MFP ControlCentre
1.Open the MCC, connect to your product and download the current .dat file.
2.Click the Menu button.
3.Select the Copy Setup tab.
4.Select Mix, Text, or Photo from the items.
If you selected Te x t:
■Select Au t o, to let the product manage the density level.
■Select Manual if you want to manually adjust the density level.
5.Select OK to save the new settings.
6.Upload the new settings to the product.
Using the Control Panel
1.On the control panel, press the Copy button.
2.Press the Quality button once.
3.Use the Right Arrow or Left Arrow button to select 
Mix, Text, or Photo.
4.Press the Menu/Select button to accept the new setting.
Downloaded From ManualsPrinter.com Manuals 
						

							Adjusting Copy Options
Phaser® 6115MFP Multifunction Product
7-4
Setting the Copy Quality
Copies can be printed in either standard (600 x 300) or enhanced (600 x 600) mode. 
To set the copy quality:
Using the MFP ControlCentre
1.Open the MCC, connect to your product and download the current .dat file.
2.Click the Menu button.
3.Select the Copy Settings tab.
4.From the Quality list, select Standard or Enhanced.
5.Select OK to save the new settings.
6.Upload the new settings to the product.
Using the Control Panel
1.On the control panel, press the Copy button.
2.Press the Quality button twice.
3.Use the Right Arrow and Left Arrow button to select 
STD or ENH.
4.Press the Menu/Select button to accept the new setting.
Setting the Copy Density
You can lighten or darken the density on your printed copies.
To set the copy density level:
Using the MFP ControlCentre
1.Open the MCC, connect to your product and download the current .dat file.
2.Click the Menu button.
3.Select the Copy Settings tab.
4.Using the Density slider, move the slider left or right the lighten or darken the copy 
density.
5.Select OK to save the new settings.
6.Upload the new settings to the product.
Using the Control Panel
1.On the control panel, press the Copy button.
2.Press the Light/Dark button.
3.Use the Right Arrow and Left Arrow button to adjust the copy density.
4.Press the Menu/Select button to accept the new setting.
Downloaded From ManualsPrinter.com Manuals 
						

							Adjusting Copy Options
Phaser® 6115MFP Multifunction Product
7-5
Collating Copies
You can choose to have your original copies collated. Use this option when you want to print 
two or more separate sets of a copy job that contains two or more pages. For example, five 
collated copies of a three-page job will result in one set of all three pages in order, then the 
second set of all three pages, and so on.
Copies set to collate are stored in product memory once and then printed. 
Note:Collating copies uses more product memory. If the original copies are extremely 
complex, the amount of collated copies the product is able to produce at one time is reduced. 
The lower left portion of the control panel display reports the percent of memory usage for the 
current collate job.
Using the MFP ControlCentre
1.Open the MCC, connect to your product and download the current .dat file.
2.Click the Menu button.
3.Select the Copy Settings tab.
4.From the Collating options, select On or Off.
5.Select OK to save the new settings.
6.Upload the new settings to the product.
Using the Control Panel
1.On the control panel, press the Copy button.
2.Press the Collate button to turn collation on or off.
3.Press the Start-Color button for color copies or Start-B&W button for black and white 
copies.
.The collate icon appears when collating is turned ON.
Downloaded From ManualsPrinter.com Manuals 
						

							Adjusting Copy Options
Phaser® 6115MFP Multifunction Product
7-6
Selecting Paper Priority
Note:If Tray 2 is not installed, Tray 1 Select will not appear on the control panel.
Using the MFP ControlCentre
1.Open the MCC, connect to your product and download the current .dat file.
2.Click the Menu button.
3.Select the Copy Settings tab.
4.Select the default tray from the Paper Priority drop-down list.
5.Select OK to save the new settings.
6.Upload the new settings to the product.
Using the Control Panel
1.Press the Function button, and then press the Menu/Select button.
2.Press the Left Arrow or Right Arrow button to select 
Tr a y  1  or Tr a y  2.
3.Press the Menu/Select button to accept the default tray setting.
Downloaded From ManualsPrinter.com Manuals 
						

							Adjusting Copy Options
Phaser® 6115MFP Multifunction Product
7-7
Specifying a Zoom Ratio
The zoom ratio can be specified either by selecting a preset zoom ratio or by specifying a 
custom zoom ratio.
Note:Depending on the selected preset zoom ration, a sample of the change to the media size 
may appear in the status area of the control panel. The sample of the media size change will 
disappear after 5 seconds.
Specifying a Preset Zoom Ratio
1.On the control panel, press the Reduce/Enlarge button until the desired zoom ratio is 
selected.
Specifying a Custom Zoom Ratio
1.On the control panel, press the Reduce/Enlarge button.
2.Use the Up Arrow or Down Arrow button to input a custom zoom ratio.
3.Press the Start-Color button for color copies or Start-B&W button for black and white 
copies.
Metric
1.15 B5 -> A4
1.41 A5 -> A4
2.00
0.50
0.70 A4 -> A5
0.81 B5 -> A5
Inch
1.29 Statement -> Letter
1.54 Statement -> Legal
2.00
0.50
0.64 Letter -> Statement
0.78 Legal -> Letter
Downloaded From ManualsPrinter.com Manuals 
						

							Advanced Copying
Phaser® 6115MFP Multifunction Product
7-8
Advanced Copying
This section includes:
■Setting 2in1 Copying on page 7-8
■ID Card Copying on page 7-9
■Printing 2-Sided Copies on page 7-10
Setting 2in1 Copying
With 2in1 copying, two separate document pages can be copied together onto a single page.
Note:The original documents must be placed in the automatic document feeder for 2in1 
copying. 2in1 copying cannot be performed using the document glass.
1.On the control panel, press the 2in1 button.
■The zoom ratio is automatically set to 0.64 for USA and Canada
■The zoom ratio is automatically set to 0.70 for all other countries.
2.Press the Start-Color button for color copies or Start-B&W button for black and white 
copies.
Downloaded From ManualsPrinter.com Manuals