Steinberg Cubase 8 Manual
Have a look at the manual Steinberg Cubase 8 Manual online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 523 Steinberg manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.
Using MIDI devices MIDI devices – general settings and patch handling 661 Note that there is an important difference between installing a preset MIDI device (“Install Device”) and importing a MIDI device setup (“Import Setup”): • The presets do not include any device mapping of parameters and controls and no graphic panels. They are simply patch name scripts. When you install a preset MIDI device, it is added to the Installed Devices list. For more information about patch name scripts, see the separate PDF document “MIDI Devices”. • A device setup can include device mapping, panels and/or patch information. Device setups are also added to the list of installed devices when imported. RELATED LINKS About Device panels (Cubase Pro only) on page 668 Defining a new MIDI device (Cubase Pro only) If your MIDI device is not included in the list of pre-configured devices (and is not a “plain” GM or XG device), you need to define it manually to make it possible to select patches by name.This is handled slightly differently for Cubase Pro and Cubase Artist. PROCEDURE 1. In the MIDI Device Manager, click the Install Device button. The Add MIDI Device dialog opens. 2. Select “Define New…” and click OK. The “Create New MIDI Device” dialog opens. For a description of the options in this dialog, see the separate PDF document “MIDI Devices”. 3. In the Identical Channels list, activate the MIDI channels you would like the device to use. This means that the device will receive Program Change over any MIDI channel. For a description of Identical and Individual Channels, see the separate PDF document “MIDI Devices”. 4. Enter a name for the device at the top of the dialog, and click OK. The device appears in the Installed Devices list, and the device node structure for the device is automatically shown in a new window. 5. Select Patch Banks from the pop-up menu at the top of the window. As you can see, the list is currently empty. 6. Make sure that the Enable Edit checkbox is activated. Now you can use the functions on the Commands pop-up menu on the left to organize the patch structure of the new device.
Using MIDI devices MIDI devices – general settings and patch handling 662 Defining a new MIDI device (Cubase Artist only) If your MIDI device is not included in the list of pre-configured devices (and is not a “plain” GM or XG device), you need to define it manually to make it possible to select patches by name. PROCEDURE 1. In the MIDI Device Manager, click the Install Device button. The Add MIDI Device dialog opens. 2. Select “Define New…” and click OK. A dialog appears. 3. Enter the name of the device and the MIDI channels you would like the device to use and click OK. The device appears in the Installed Devices list. 4. Select the device in the list. As you can see, it currently contains only an Empty Bank item. 5. Make sure that the Enable Edit checkbox is activated. Now you can use the functions on the Commands pop-up menu on the left to organize the patch structure of the new device. Installing a preset MIDI device PROCEDURE 1. Click the Install Device button. A dialog opens listing all pre-configured MIDI devices. For now we assume that your MIDI device is included in this list. 2. Locate and select the device in the list and click OK. If your MIDI device is not included in the list but is compatible with the GM (General MIDI) or XG standards, you can select the generic GM or XG Device options at the top of the list. When you select one of these options, a name dialog will appear. Enter a name for the instrument and click OK. The device now appears in the Installed Devices list to the left. 3. Make sure that the new device is selected in the list and open the Output pop-up menu. 4. Select the MIDI output that the device is connected to. 5. If you are using Cubase, click the Open Device button. A separate window opens for the selected device, showing a node structure in the left half of the window. At the top of this structure is the device itself, and below it the MIDI channels used by the device. For more information about the Device window, see the separate PDF document “MIDI Devices”.
Using MIDI devices MIDI devices – general settings and patch handling 663 6. Select Patch Banks from the pop-up menu at the top of the window. RESULT The Patch Banks list in the left half of the window shows the patch structure of the device. This could simply be a list of patches, but it is usually one or several layers of banks or groups containing the patches (much like a folder structure on a hard disk for example). • You can rename a device in the Installed Devices list by double-clicking and typing – this is useful if you have several devices of the same model, and want to separate them by name instead of by number. • To remove a device from the Installed Devices list, select it and click Remove Device. NOTE Note that if there already exists a panel for the device (Cubase Pro only), opening the device might open this panel first. In this case, click on the Edit (“e”) button to open the Device window. About Patch Banks Depending on the selected device, you may find that the Patch Banks list is divided in two or more main banks. Typically, these are called Patches, Performances, Drums, etc. The reason for having several patch banks is that different “types” of patches are handled differently in the instruments. For example, while “patches” typically are “regular” programs that you play one at the time, “performances” may be combinations of programs, which could be split across the keyboard, layered, or used for multi-timbral playback, and so on. Cubase Pro only: For devices with several banks, you will find an additional item labeled “Bank Assignment” in the pop-up menu at the top of the window. Selecting this opens a window in which you can specify for each MIDI channel which bank it should use.
Using MIDI devices MIDI devices – general settings and patch handling 664 Cubase Artist only: Devices with several banks have an additional tab “Bank Assignment”. Select this tab to specify for each MIDI channel which bank it should use. The selection here will affect which bank is displayed when you select programs by name for the device in the track list or Inspector. For example, many instruments use MIDI channel 10 as an exclusive drum channel, in which case you would want to select the “Drums” (or “Rhythm Set”, “Percussion”, etc.) bank for channel 10 in this list. This would then let you choose between different drum kits in the track list or Inspector. Limitations There is no easy way to import a patch name script into an existing MIDI device. For a complex workaround based on XML editing, see the separate PDF document “MIDI Devices”. Selecting a patch for an installed device If you return to the Project window at this point, you will find that the installed device has been added to the MIDI Output menus (in the track list and the Inspector). Now you can select patches by name, in the following way: PROCEDURE 1. Open the Output menu (in the track list or Inspector) for the track you want to associate the installed device with, and select the device. This directs the track to the MIDI output specified for the device in the MIDI Device Manager. The Bank and Program Selector fields in the track list and Inspector are replaced by a single Program Selector field that currently reads “Off”. 2. Click the Program Selector field to display a pop-up menu, hierarchically listing all the patches in the device. The list is similar to the one displayed in the MIDI Device Manager. You can scroll the list up and down (if required), click the plus/minus signs to show or hide subgroups, etc. You can also use a filter function here. For this, enter the search term in the Filter field, e.g. “drum”, and press [Return] to display all sounds with “drum” in the name.
Using MIDI devices MIDI devices – general settings and patch handling 665 3. Click a patch in the list to select it. This sends the appropriate MIDI message to the device. You can also scroll the program selection up or down, as with any value. Renaming patches in a device The pre-configured devices list is based on the factory-preset patches, i. e. the patches included in the device when you first bought it. If you have replaced some of the factory presets with your own patches, you need to modify the device so that the patch name list matches the actual device: PROCEDURE 1. In the MIDI Device Manager, select the device in the Installed Devices list. 2. If you are using Cubase, click Open Device. Make sure that Patch Banks is selected on the pop-up menu at the top of the window. 3. Activate the Enable Edit checkbox. When this is turned off (default), you cannot edit the pre-configured devices. 4. In the Patch Banks list, locate and select the patch you want to rename. In many instruments, the user-editable patches are located in a separate group or bank. 5. Click on the selected patch in the Patch Banks list to edit its name. 6. Type in the new name and press [Return]. 7. Rename the desired patches in this way, and finish by deactivating Enable Edit again (to avoid modifying the device by accident). NOTE You can also make more radical changes to the patch structure in a device (adding or deleting patches, groups or banks), see below. For example, this is useful if you expand your MIDI device by adding extra storage media such as RAM cards. Patch Structure Patches are structured as follows: • Banks are the main categories of sounds – typically patches, performances and drums, as described above. • Each bank can contain any number of groups, represented by folders in the list. • The individual patches, performances or drum kits are represented by presets in the list.
Using MIDI devices MIDI devices – general settings and patch handling 666 The Commands pop-up menu contains the following items: Create Bank Creates a new bank at the highest hierarchical level of the Patch Banks list. You can rename this by clicking on it and typing a new name. New Folder Creates a new subfolder in the selected bank or folder. This could correspond to a group of patches in the MIDI device, or just be a way for you to categorize sounds, etc. When you select this item, a name dialog opens, allowing you to name the folder. You can also rename the folder afterwards by clicking it and typing in the list. New Preset This adds a new preset in the selected bank or folder. You can rename the preset by clicking it and typing a new name. When the preset is selected, the corresponding MIDI events (Program Change, Bank Select, etc.) are shown in the event display to the right. The default setting for a new preset is Program Change 0 – to change this, proceed as follows: IMPORTANT For details on which MIDI events are used for selecting patches in the MIDI device, consult its documentation. • To change which Program Change value is sent out to select the patch, adjust the number in the Value column for the Program Change event. • To add another MIDI event (e. g. Bank Select) click directly below the last event in the list and select a new event from the pop-up menu. After adding a new event, you need to set its value in the Value column, as with Program Change. • To replace an event, click on it and select another event from the pop-up menu. For example, a MIDI device may require that a Bank Select message is sent first, followed by a Program Change message, in which case you would need to replace the default Program Change message with a Bank Select message and add a new Program Change after that. • To remove an event, select it and press [Delete] or [Backspace]. IMPORTANT Different devices use different schemes for Bank Select. When you insert a Bank Select event, you should check the device’s documentation to find out whether to choose “CC: BankSelect MSB”, “Bank Select 14 Bit”, “Bank Select 14 Bit MSB-LSB Swapped” or some other option. Add Multiple Presets This opens a dialog, allowing you to set up a range of presets to be added to the selected bank or folder.
Using MIDI devices MIDI devices – general settings and patch handling 667 Adding Multiple Presets PROCEDURE 1. Add the event types required for selecting a patch in the MIDI device. This is done just as when editing the settings for a single event: clicking in the event display brings up a pop-up menu from which you can select an event type. 2. Use the Range column to set up either a fixed value or a range of values for each event type in the list. This requires some explanation: If you specify a single value in the Range column (e. g. 3, 15 or 127), all added presets will have an event of this type set to the same value. If you instead specify a value range (a start value and an end value, separated by a dash, e. g. 0–63), the first added preset will have an event set to the start value, the next value will be incrementally raised by one and so on, up to and including the end value. NOTE The number of added presets depends on the Range setting. 3. Specify a Default Name below the event display. The added events will get this name, followed by a number. You can rename presets manually in the Patch Banks list later. 4. Click OK. A number of new presets have now been added to the selected bank or folder, according to your settings. Other editing functions • You can move presets between banks and folders by dragging them to the Patch Banks list. • You can remove a bank, folder or preset by selecting it in the Patch Banks list and pressing [Backspace]. •Cubase Pro only: If you specify more than one bank, a Bank Assignment item is added to the pop-up menu at the top of the window. Use this to assign banks to the different MIDI channels. •Cubase Artist only: If you specify more than one bank, a Bank Assignment tab is added next to the Patch Banks tab. RELATED LINKS About Patch Banks on page 663
Using MIDI devices About Device panels (Cubase Pro only) 668 About Device panels (Cubase Pro only) On the following pages we will describe how to use MIDI Device panels and the powerful MIDI device panel editing features of the MIDI Device Manager. NOTE We recommend that you first configure the patch banks, then export the device setup before editing the panels. T h i s w a y , m o s t o f y o u r s e t t i n g s w i l l b e s a v e d i n c a s e of panel configuration problems. The panels are saved in XML format. For more information, see the separate PDF document “MIDI Devices”. Basic concept The panel editing features in the MIDI Device Manager can be seen as a separate application or entity within Cubase. It allows you to build device maps complete with control panels, including all parameters controllable from within Cubase. Building more complex device maps requires that you are familiar with SysEx programming (see the separate PDF document “MIDI Devices”). But you can also create simpler panels by assigning MIDI Control Change messages to control objects, which does not require any programming skills. Although these powerful editing features are there if you need them, you do not have to use them to use MIDI devices. Device panels in the program In this section we will take a look at a pre-configured MIDI device panel to illustrate how it can be used in Cubase. Several device maps can be found in the Knowledge Base on the Steinberg web site. Opening a device setup PROCEDURE 1. Open the MIDI Device Manager from the Devices menu. 2. Click the “Import Setup” button. A file dialog opens. 3. Select a device setup file. The Device setup files are saved in XML format, for more information see the separate PDF document “MIDI Devices”. 4. Click Open. The Import MIDI Devices dialog opens where you can select one or several devices for import. A device setup file can contain one or several MIDI devices.
Using MIDI devices About Device panels (Cubase Pro only) 669 5. Select a device and click OK. The device is added to the list of installed devices in the MIDI Device Manager. 6. Select the correct MIDI output from the Output pop-up menu, select the device in the list and click the Open Device button. The device panel opens in a separate window. The Edit (“e”) button at the top opens the Edit Panel window, see the separate PDF document “MIDI Devices”. 7. Close the Device panel and return to the Project window. 8. Select the device from the “Output Routing” pop-up menu for a MIDI track. Note that for some devices, you may have to set the MIDI channel to “Any”. RESULT Now the Device panel can be opened by clicking the Open Device Panels button in the Inspector or in the channel for the corresponding track in the MixConsole. NOTE Note that [Ctrl]/[Command]-clicking the Open Device Panels button allows you to open a subpanel via the panel browser pop-up menu. Showing panels in the Inspector PROCEDURE 1. In the Inspector, open the Device Panel section and click on the arrow on the right. A “Panels” folder is shown with the selected device in a node structure below it. If you open all the folders, you can select any individual panel from the device that “fits” into the Device Panel space. 2. Select a panel from the list. The panel opens in the Inspector.
Using MIDI devices About Device panels (Cubase Pro only) 670 NOTE If you cannot see any panels in the “Panels” folder, although you have successfully set up a MIDI device with several panels, make sure that you selected the correct channel from the Channel pop-up menu, preferably “Any” to see all device panels. Also make sure that the panels fit into the space, otherwise they will not be available in the “Panels” folder. Showing panels in the MixConsole PROCEDURE 1. Open the MixConsole and activate the “Show Channel Racks” button. 2. Click Racks to open the rack selector and activate the Device Panels rack. 3. Click the Panel header to expand the Device Panels rack. 4. Click the button at the right of the header. The Panels folder is displayed like in the Inspector, but with different available panels. Just like in the Inspector, the panel has to “fit” into the available space to be selectable. 5. Select a panel. The panel is shown in the Channel Racks section of the MixConsole. Automating device parameters Automation works just like for normal audio and MIDI tracks: PROCEDURE 1. Open the device panel by clicking the Open Device Panels button in the Inspector. 2. Activate Write automation on the device panel. You can automate the device by either moving knobs and sliders on the device panel or by drawing curves on the automation track for a selected parameter. 3. If you now go back to the Project window, there will be a MIDI Device Automation track in the track list. If the track is hidden, select “Show All Used Automation” on the Track Folding submenu of the Project menu.