Samsung Ht D5550k User Manual

							0 EnglishEnglish 1
03 Setup
On the Security screen, enter your network’s 
Pass Phrase. Enter numbers directly using 
your remote control. 
To select a letter, press the ▲▼◄► buttons 
to move the cursor, then press the ENTER 
button.
SettingsDisplay
Audio
Network
System
Language
Security
General
SupportSettings
Network
Language
Network Settings
a
 Previous    m Move    " Enter    ' Return
agmsa/A*DeleteSpaceDonetuvwxyz0nopqr789hijkl456bcdef123
Enter security key. 0 entered
NOTE
You should be able to fi nd the Pass Phrase on 
one of the set up screens you used to set up 
your router or modem.
When done, press the ▲▼◄► buttons to 
move the cursor to Done, and then press the 
ENTER  button.
The Network Status screen appears. The 
product connects to the network after the 
network connection is verifi ed.
Setting up the Wireless network Connection 
- manual
If the Auto Setting does not work, you need to 
enter the Network settings values manually.
To view the Network Settings values on most 
Windows computers, follow these steps: Right click the Network icon on the bottom 
right of the screen.
In the pop-up menu, click Status.
On the dialog that appears, click the Support 
tab.
On the Support tab, click the Details button.
The Network settings are displayed.
4.
✎

5.
1.
2.
3.
4.
To enter the Network settings into your product, 
follow these steps:
Follow Steps 1 through 5 in the ‘Setting Up 
the Wireless Network Connection - Auto’ 
procedure.
When done, press the ▲▼◄► buttons to 
move the cursor to  Done, and then press the 
ENTER  button. The Network Status screen 
appears. 
SettingsDisplay
Audio
Network
System
Language
Security
General
SupportSettings
Network
Language
IP Settings
>
 Move    " Enter    ' Return
IP Mode  Manual
IP Address 0.0.0.0Subnet Mask 0.0.0.0Gateway 0.0.0.0DNS Mode  Manual
DNS Server 0.0.0.0OK
On the Network Status screen, select 
Cancel, and then press Enter.
Press the ◄► buttons to select  IP Settings, 
and then press the  ENTER button.
Press the  ENTER button to select  IP Mode.
Press the ▲▼ buttons to select  Manual, 
and then press the  ENTER button.
Press the ▼ button to go to the fi rst entry 
fi eld (IP Address).
Use the number buttons to enter numbers.
When done with each fi eld, press the ► 
button to move successively to the next fi eld.
You can also use the other arrow buttons to 
move up, down, and back.
Enter the  IP Address , Subnet Mask , and 
Gateway  values.
Press the ▼ to go to  DNS Mode.
Press the ▼ button to go to the fi rst DNS 
entry fi eld. Enter the numbers as above.
The Network Status screen appears. The 
product connects to the network after the 
network connection is verifi ed.
1.
2.
3.
4.
5.
6.
7.
8.
9.
10.
11.
12.
13.
 
						

							 English
Setup
English 
WPS(PBC)
The easiest way to set up the wireless network 
connection is using the WPS(PBC) function or the 
One Foot Connection function.
If your wireless router has a WPS(PBC) button, 
follow these steps:
Press the ▲▼ buttons to select  WPS(PBC).
SettingsDisplay
Audio
Network
System
Language
Security
General
SupportSettingsDisplayAudioNetworkSystemLanguageSecurityGeneralSupport
Network Settings
>
 Move    " Enter    ' Return
One Foot
Connection
Wireless
(general)Wired
Select a network connection type.
Connect to the Wireless Router easily by pressing the
WPS(PBC) button. Choose this if your Wireless Router
supports Push Button Confi guration(PBC).WPS(PBC)
Press the  ENTER button.
Press the  WPS(PBC)  button on your router 
within two minutes. Your product displays 
the Network Selection Screen, and 
automatically acquires all the network 
settings values it needs and connects to your 
network. When it is done, it displays an  OK 
button. Press the  ENTER button on your 
remote.
One Foot Connection
You can set up the wireless connection 
automatically if you have a Samsung Wireless 
Router which supports One Foot Connection. To 
connect using the One Foot Connection function, 
follow these steps:
Press the ▲▼ buttons to select  One Foot 
Connection .
SettingsDisplay
Audio
Network
System
Language
Security
General
SupportSettingsDisplayAudioNetworkSystemLanguageSecurityGeneralSupport
Network Settings
>
 Move    " Enter    ' Return
Wireless
(general)Wired
Select a network connection type.
Connect to your wireless network automatically if your
Wireless Router supports One Foot Connection. Select
this connection type after placing the Wireless Router
within 10 inches(25cm) of product.
One Foot
ConnectionWPS(PBC)
1.
2.
3.
1.
Press the  ENTER button.
Place the Samsung Wireless Router within 
25 cm (10 inches) of your product to 
connect.
Wait until the connection is automatically 
established.
Network Status
Check whether a connection to the network and 
the Internet have been established.
SettingsDisplay
Audio
Network
System
Language
Security
General
SupportSettingsDisplayAudioNetworkSystemLanguageSecurityGeneralSupport
Network Status
    < Move    " Enter    ' Return
MAC Address  XX:XX:XX:XX:XX:XX
IP Address  0. 0.0.0
Subnet Mask  0. 0.0.0
Gateway  0. 0.0.0
DNS Server  0. 0.0.0Cannot connect to the Wireless Router. Try the following.
- Ensure the Wireless Router is powered on and try re-setting the power of the 
Wireless Router.
- Check the security key if the Wireless Router has a security key.
KT_WLAN
IP SettingsRetryOKNetwork Settings
BD-LIVE Internet Connection
Set to allow or prohibit an Internet connection 
when you use the BD-LIVE service.
Allow (All)  : The Internet connection is allowed 
for all BD-LIVE contents.
Allow (Valid Only)  : The Internet connection is 
allowed only for BD-LIVE contents containing a 
valid certifi cate.
Prohibit  : No Internet connection is allowed for 
any BD-LIVE content.
NOTE
What is a valid certifi cate?
When the product uses BD-LIVE to send the 
disc data and a request to the server to certify 
the disc, the server uses the transmitted data 
to check if the disc is valid and sends the 
certifi cate back to the product.
The Internet connection may be restricted 
while you are using BD-LIVE contents.
2.
3.
4.
•
•
•
✎


 
						

							 EnglishEnglish 
03 Setup
System
Initial Settings
By using the Initial Settings function, you can set 
the language, Musical Room Calibration, Network 
Settings, etc. 
For more information about the Initial Settings 
function, refer to the Initial Settings section of this 
user manual. (See pages 29~46)
Anynet+ (HDMI-CEC)
Anynet+ is a convenient function that offers linked 
operations with other Samsung products that 
have the Anynet+ feature.
To operate this function, connect this product to 
a Samsung TV with an HDMI cable.
With Anynet+ on, you can operate this product 
using a Samsung TV remote control and start 
disc playback simply by pressing the PLAY (+ ) 
button on the TV’s remote control.
For more information, please see the TV user 
manual.
Off  : Anynet+ functions will not work.
On  : Anynet+ functions will work.
NOTE
This function is not available if the HDMI cable 
does not support CEC.
If your Samsung TV has an Anynet+ logo, then 
it supports the Anynet+ function.
Depending on your TV, certain HDMI output 
resolutions may not work.
Please refer to the user manual of your TV.
BD Data Management
Lets you manage the downloaded contents you 
accessed through a Blu-ray Disc that supports 
the BD-LIVE service and stored on an attached 
Flash memory device.
You can check the device’s information including 
the storage size, delete the BD data, or change 
the Flash memory device. 
•
•
✎



BD Data Management Screen Information :
Total Size :  Total memory size of the device.
Available Size :  Available memory in the 
device.
Delete BD Data :  Delete all BD data in the 
storage.
Select Device :  Change location of desired 
memory to store BD data.
NOTE
In the external memory mode, disc playback 
may be stopped if you disconnect the USB 
device in the middle of playback.
Only those USB devices formatted in the FAT 
fi le system (DOS 8.3 volume label) are 
supported. We recommend you use USB 
devices that support USB 2.0 protocol with 4 
MB/sec or faster read/write speed.
The Resume Play function may not work after 
you format the storage device.
The total memory available to BD Data 
Management may differ, depending on the 
conditions.
Time Zone
You can specify the time zone that is applicable 
to your area.
SettingsDisplay
Audio
Network
System
Language
Security
General
SupportSettings
Network
Language
Time Zone
< Change    " Save    ' Return
GMT + 00:00London, Lisbon, Casablanca
DivX® Video On Demand
View DivX® VOD Registration Codes to purchase 
and play DivX® VOD contents or view the 
deregistratiion code to degregister this product.
Reset
All settings will revert to the default except for the 
network and Smart Hub settings.
•
•
•
•
✎




 
						

							 English
Setup
English 
Language
You can select the language you prefer for the 
Home menu, disc menu, etc.On-Screen Menu  : Select the language for the 
on-screen displays.
Disc Menu  : Select the language for the disc 
menu displays.
Audio  : Select the language for disc audio.
Subtitle  : Select the language for disc subtitles.
NOTE
The selected language will only appear if 
it is supported on the disc.
Security
This function works in conjunction with Blu-ray 
and DVD discs that have been assigned an age 
rating or numeric rating that indicates the maturity 
level of the content. These numbers help you 
control the types of Blu-ray and/DVD discs that 
your family can watch.
When you access this function for the first time, 
the password setup screen appears. Enter a 
desired 4-digit password using the number 
buttons. (The default password is 0000.)
After you have set your password, select an age 
rating you want to set for the BD Parental Rating 
and a rating level you want to set for the DVD 
Parental Rating. The product will only play Blu-ray 
discs rated at or below the age rating and DVD 
discs rated below the numeric rating unless the 
password is entered. 
Larger numbers indicate more mature content.
BD Parental Rating
This will prohibit playback of Blu-ray disc rated 
above Parental Rating.
DVD Parental Rating
Prevent playback of DVD discs with specific 
numerical ratings unless a password is entered.
•
•
•
•
✎
Change Password
Change the 4-digit password used to access 
security functions.
If you forgot your password
Remove the disc.
Press and hold the  STOP (@ ) button on the 
front panel for 5 seconds or more. 
All settings will revert to the factory settings.
NOTE
When the factory default settings are restored, 
all the user stored BD data will be deleted.
General
Front Display
Change the brightness of the front panel.
Auto  : Dim during playback.
Dim  : Dim the display window.
Bright  : Brighten the display window.
NOTE
You cannot change the brighness of the 
Power button and the Function button.
Network Remote Control
The Network Remote Control function lets you 
control your Blu-ray Home Theater from a remote 
device such as a smart phone through a wireless 
connection to your local area network.
To use the Network Remote Control function, follow 
these steps:
Select On in the Network Remote Control 
menu.
Install the Samsung network remote control 
application to control your product on your 
compatible portable device.
Make sure your portable device and your 
product are connected to the same wireless 
router.
Start the application on your portable device. 
The application should find your product and 
display it on a list.
Select the product. 
1.
2.
✎

•
•
•
✎

1.
2.
3.
4.
5.
 
						

							 EnglishEnglish 
03 Setup
If this is the first time you are using the 
function, it will ask you to allow or deny 
remote control of the product. Select Allow.
Follow the instructions that came with the 
application to control the product.
Support
Software Upgrade
The Software Upgrade menu allows you to 
upgrade the product’s software for performance 
improvements or additional services. You can 
upgrade in four ways:
By Internet
By USB
By Disc
By Downloaded (File)
The four methods are explained below.
By Internet
To upgrade by Internet, follow these steps:
Select  By Internet , and then press the 
ENTER  button. The Connecting to Server 
message appears.
If there is a download available, the 
Download pop-up appears with a progress 
bar and the download starts.
When the download is complete, the 
Upgrade Query window appears with three 
choices: Upgrade Now, Upgrade Later, or 
Don’t Upgrade.
If you select Upgrade Now, the product 
upgrades the software, turns off, and then 
turns on automatically. 
If you do not make a selection in one minute 
or select Upgrade Later, the product stores 
the new upgrade software. You can upgrade 
the software later using the By Downloaded 
function.
If you select Don’t Upgrade, the product 
cancels the upgrade.
6.
7.
•
•
•
• 1.
2.
3.
4.
5.
6. NOTE
Your product must be connected to the 
Internet to use the By Internet function.
The upgrade is complete when the product 
turns off, and then turns on again by itself. 
Never turn the product off or back on 
manually during the update process.
Samsung Electronics shall take no legal 
responsibility for product malfunction 
caused by an unstable Internet connection 
or consumer negligence during a software 
upgrade.
If you want to cancel the upgrade while the 
upgrade software is downloading, press the 
ENTER
 button.
By USB
To upgrade by USB, follow these steps:
Visit www.samsung.com/bluraysupport
Download the latest USB software upgrade 
zip archive to your computer.
Unzip the zip archive to your computer. You 
should have a single folder with the same 
name as the zip file.
Copy the folder to a USB flash drive. 
Make sure the disc tray is empty, and then 
insert the USB flash drive into the USB port 
of the product. 
In the product’s menu, go to Settings > 
Support > Software Upgrade.
Select By USB .
NOTE
The disc tray must be empty when you 
upgrade the software using the USB Host 
jack.
When the software upgrade is done, check 
the software details in the software Upgrade 
menu.
Do not turn off the product during the 
software upgrade. It may cause the product 
to malfunction.
Software upgrades using the USB Host jack 
must be performed with a USB memory 
flash stick only.
✎





1.
2.
3.
4.
5.
6.
7.
✎




 
						

							 English
Setup
English 
By Disc
To upgrade by Disc, follow these steps:
Visit www.samsung.com/bluraysupport.
Download the latest disc software upgrade 
zip archive to your computer.
Unzip the zip archive to your computer. You 
should have a single folder with the same 
name as the zip file.
Write the folder onto a disc. We recommend 
a CD-R or DVD-R.
Finalize the disc before you remove it from 
your computer.
Insert the disc into product.
In the product’s menu, go to Settings > 
Support > Software upgrade.
Select By Disc .
NOTE
When the system upgrade is done, check the 
software details in the software Upgrade menu.
Do not turn off the product during the Software 
Upgrade. It may cause the product malfunction.
By Downloaded 
The By Downloaded option lets you upgrade using 
a file the product downloaded earlier but you 
decided not to install immediately or a file 
downloaded by the product in Standby Mode (See 
Download in Standby Mode below).
To upgrade By Downloaded, follow these steps:
If upgrade software has been downloaded, 
you will see the software version number to 
the right of By Downloaded. 
Select By Downloaded, and then press the 
ENTER button. 
The product displays a message asking if 
you want to upgrade. Select  Yes. The 
product begins the upgrade.
When the update is complete, the product 
turns off automatically, and then turns on.
1.
2.
3.
4.
5.
6.
7.
8.
✎


1.
2.
3.
4.
NOTE
When the system upgrade is done, check the 
software details in the software Upgrade 
menu.
Do not turn off the product during the software 
Upgrade. It may cause the product to 
malfunction.
To use the By Downloaded function, your 
product must be connected to the Internet.
Download in Standby Mode
You can set the Download in Standby Mode 
function so that the product downloads new 
upgrade software when it is in Standby mode. In 
Standby mode, the product is off, but its Internet 
connection is active. This allows the product to 
download upgrade software automatically, when 
you are not using it.
To set Download in Standby Mode, follow these 
steps:
Press the ▲▼ buttons to select  Download 
in  Standby Mode , and then press the 
ENTER  button. 
Select  On or  Off.
Off  : If you select  Off, the product will notify 
you with a pop up message when new 
upgrade software is available.
On  : If you select  On, the product will 
automatically download new upgrade 
software when it is in Standby mode with 
the power off. If it downloads new upgrade 
software, the product will ask you if you 
want to install it when you turn the product 
on.
NOTE
To use the Download in Standby Mode 
function, your product must be connected to 
the Internet.
Contact Samsung
Provides contact information for assistance with 
your product.
✎



1.
2.
•
•
✎

 
						

							 EnglishEnglish 
04 Basic Functions
Playing a Disc
Playback
Insert a disc into the disc slot with the disc's 
label facing up.
Press the PLay (+ ) button.
Playback related buttons
PLAY ( +) Starts playback. 
STOP ( @ )
Stops playback.
If you press the button 
once : The stop position is 
memorized.
If you press the button twice 
: The stop position is not 
memorized.•
•
PAUSE ( # )Pauses playback.
NOTE
For some discs, the product may not STOP 
memorize the stop positon when you press the 
STOP  ( 
@ ) button.
Video fi les with high Bitrates of 20Mbps or 
more strain the product’s capabilities and 
may stop playing during play back.
Disc Structure
The content of discs are usually divided as shown 
below.
Blu-ray Disc, DVD-VIDEO
title 1 title 2chapter 1 chapter 2 chapter 1 chapter 2 chapter 3
1.
2.
✎


•
Audio CD (CD-DA)
track 1 track 2 track 3 track 4 track 5
MP3, WMA, DivX, MKV and MP4
folder (group) 1folder (group) 2
fi le 1 fi le 2 fi le 1 fi le 2 fi le 3
Playing a 2D video in 3D mode     
hZ
You can enjoy an ordinary 2D video in 
3D mode.
NOTE
If you move to the Home or Smart 
Hub Home menu in 3D mode, it will switch 
to 2D automatically.
using the Disc menu/title menu/  Popup menu
Using the Disc Menu     
hZ
During playback, press the  DISC 
menu   button on the remote 
control.
Press the 
▲▼_ + buttons to make 
a selection, and then press the 
enter  button.
NOTE
Depending on the disc, the menu items may 
differ and this menu may not be available.
•
•
✎

1.
2.
✎

FUNCTION
TV SOURCEPOWER
DVD RECEIVER/TV SLEEP
DISC MENU MENU TITLE MENU
MUTE
SFE MODE
VOLTUNING /CH
TOOLS
RETURN EXIT
INFO
A
B C DINTERNET @DSPMO/ST
REPEAT
1 2 3
4 5 6
7 8
09
POPUP
TUNER 
MEMORY
Basic Functions
 
						

							 English
Basic Functions
English 
Using the Title Menu     
Z
During playback, press the tIt Le 
menu  button on the remote 
control.
Press the 
▲▼_ + buttons to 
make the desired selection, then 
press the  enter button.
NOTE
Depending on the disc, the menu items may 
differ and this menu may not be available.
The Title Menu will only be displayed if there 
are at least two titles on the disc.
Playing the Title List   
�
During playback, press the  DISC 
MENU  or TITLE MENU  button.
Press the 
▲▼ buttons to select 
an entry you want to play from 
Title List, then press the  enter 
button.
Using the Popup Menu 
h
During playback, press the  Po Pu P 
button on the remote control.
Press the 
▲▼_ + buttons or 
enter  button to select the 
desired menu.
NOTE
Depending on the disc, the menu items may 
differ and this menu may not be available.
1.
2.
✎


1.
2.
1.
2.
✎

using the Search and Skip functions
During playback, you can search quickly through 
a  chapter  or  track,  and  use  the  skip  function  to 
jump to the next selection.
Searching for a Desired Scene
h�Z��
During playback, press the  SEARCH (() ) 
button. 
Each time you press the SEARCH (()) 
button, the playback speed will change as 
follows.
BD-ROM,  
BD-RE/-R,  
DVD-RW/-R,  
DVD+RW/+R,  DVD-VIDEO )
 1 
 )
 2 
 )
 3 
  
)  4  
)
 5 
 )
 6 
 )
 7
(  1 
 (
 2 
 (
 3 
  
(  4  
(
 5 
 (
 6 
 (
 7
DivX, MKV, MP4 )
 1 
 )
 2 
 )
 3
(  1 
 (
 2 
 (
 3
To return to normal speed playback, press the 
PLAY  (+ ) button.
NOTE
The home theater does not play sound in 
search mode.
If you press the 
( or ) button too quickly 
this product might think you are just holding 
the button down.  This will lead to improper 
operation. Be sure to not press these buttons 
too rapidly.
Skipping Chapters
h�Z��
During playback, press the  SKIP ([] ) 
button. 
If you press the  SKIP (] ) button, the disc 
moves to the next chapter. 
If you press the  SKIP ([ ) button, the disc 
moves to the beginning of the chapter. One 
more press makes the disc move to the 
beginning of the previous chapter.
•
•
✎


•
FUNCTION
TV SOURCEPOWER
DVD RECEIVER/TV SLEEP
DISC MENU MENU TITLE MENU
MUTE
SFE MODE
VOLTUNING /CH
TOOLS
RETURN EXIT
INFO
A
B C D
INTERNET @DSPMO/ST
REPEAT
1 2 3
4 5 6
7 8
09
POPUP
TUNER 
MEMORY
FUNCTION
TV SOURCEPOWER
DVD RECEIVER/TV SLEEP
DISC MENU MENU TITLE MENU
MUTE
SFE MODE
VOLTUNING /CH
TOOLS
RETURN EXIT
INFO
A
B C D
INTERNET @DSPMO/ST
REPEAT
1 2 3
4 5 6
7 8
09
POPUP
TUNER 
MEMORY
FUNCTION
TV SOURCEPOWER
DVD RECEIVER/TV SLEEP
DISC MENU MENU TITLE MENU
MUTE
SFE MODE
VOLTUNING /CH
TOOLS
RETURN EXIT
INFO
A
B C DINTERNET @DSPMO/ST
REPEAT
1 2 3
4 5 6
7 8
09
POPUP
TUNER 
MEMORY
FUNCTION
TV SOURCEPOWER
DVD RECEIVER/TV SLEEP
DISC MENU MENU TITLE MENU
MUTE
SFE MODE
VOLTUNING /CH
TOOLS
RETURN EXIT
INFO
A
B C D
INTERNET @DSPMO/ST
REPEAT
1 2 3
4 5 6
7 8
09
POPUP
TUNER 
MEMORY
 
						

							 EnglishEnglish 
04 Basic Functions
Slow motion Play/Step motion Play
Slow Motion Play
h�Z��
In pause ( # ) mode, press the SEARCH () ) 
button.
If you press the  SEARCH () ) button, the 
playback speed is reduced to
*  1/8  * 1/4  * 1/2
To return to normal speed playback, press the 
PLAY  (+  ) button.
NOTE
The product does not play sound in slow 
mode.
Slow motion operates only in the forward 
direction.
Step Motion Play
h�Z��
In pause mode, press the  PAUSE ( # ) button.
Each time the  PAUSE ( # ) button is pressed, a 
new frame will be appear.
To return to normal speed playback, press the 
PLAY  ( +  ) button.
NOTE
The product does not play sound in step 
mode.
Step motion operates only in the forward 
direction.
repeat Playback
Repeat the Title or Chapter
h�Z�
Repeat the disc title or chapter.
During playback, press the  REPEAT 
button on the remote control.
Press the ▲▼ buttons to select 
Chapter  or Title , then press the 
ENTER  button.
•
•
✎


•
•
✎


1.
2.
Repeat > Off
To return to normal play, press the  REPEAT 
button again.
Press the ▲▼ buttons to select  Off, then 
press the  ENTER button.
NOTE
Depending on the disc, the Repeat function 
may not be available.
Repeat the Section
h�Z�
During playback, press the  REPEAT 
button on the remote control.
Press the ▲▼ buttons to select 
REPEAT A-B .
Repeat > Repeat A-B : Off  " Mark A
Press the ENTER button at the point where 
you want repeat play to start (A).
Press the  ENTER button at the point where 
you want repeat play to stop (B).
To return to normal play, press the  REPEAT 
button again.
Press the  ENTER button.
NOTE
If you set point (B) before 5 seconds has 
elapsed, a prohibition message will appear.
3.
4.
✎

1.
2.
3.
4.
5.
6.
✎

FUNCTION
TV SOURCEPOWER
DVD RECEIVER/TV SLEEP
DISC MENU MENU TITLE MENU
MUTE
SFE MODE
VOLTUNING /CH
TOOLS
RETURN EXIT
INFO
A
B C D
INTERNET @DSPMO/ST
REPEAT
1 2 3
4 5 6
7 8
09
POPUP
TUNER 
MEMORY
FUNCTION
TV SOURCEPOWER
DVD RECEIVER/TV SLEEP
DISC MENU MENU TITLE MENU
MUTE
SFE MODE
VOLTUNING /CH
TOOLS
RETURN EXIT
INFO
A
B C D
INTERNET @DSPMO/ST
REPEAT
1 2 3
4 5 6
7 8
09
POPUP
TUNER 
MEMORY
 
						

							0 English
Basic Functions
English 1
using the tooLS button
During playback, you can operate the 
disc menu by pressing the TOOLS 
button.
TOOLS Menu Screen
Tools
      <
 Change    " Enter   ' Return
Title Search    1/2
Chapter Search  :  1/20
Time Search  : 00:00:13/01:34:37
Picture Settings  :  Normal
Audio  : 
1/4 ENG Multi CH
User EQ
Subtitle 

:  0/7 Off
Angle  : 
1/1
NOTE
Depending on the disc, the TOOLS menu 
may differ.
Moving to a Desired Scene Directly
h�Z�
During playback, press the  TOOLS button.
Press the ▲▼ buttons to select  Title, 
Chapter  or Playing Time .
Enter the desired  Title, Chapter  or Playing 
Time  using the number buttons, then press 
the  ENTER  button.
Selecting the Audio Language
h�Z�
During playback, press the  TOOLS button.
Press the ▲▼ buttons to select  Audio.
Press the  ENTER button.
Press the ▲▼ buttons to select the audio 
language you want.
NOTE
The ◄► indicator will not be displayed on the 
screen if the BONUSVIEW section does not 
contain any BONUSVIEW audio settings.
•
✎ ▪
1.
2.
3.
1.
2.
3.
4.
✎

Information about the primary / secondary 
audio modes will be also displayed if the Blu-
ray Disc has a BONUSVIEW section.
Use the ◄► button to switch between 
primary and secondary audio modes.
The languages available depend on the 
languages that are encoded on the disc. This 
function or certain languages not be available.
Some Blu-ray Discs may allow you to select 
either the multi-channel LPCM or Dolby digital 
audio soundtrack in English.
Selecting the Subtitle Language
hZ�
During playback, press the  TOOLS button.
Press the ▲▼ buttons to select  Subtitle.
Press the ◄► buttons to select the desired 
subtitle language.
NOTE
Depending on the Blu-ray Disc / DVD, you may 
be able to change the subtitle language in the 
Disc Menu.
Press the  DISC MENU  button.
The subtitle languages available depend on the 
subtitle languages encoded on the disc. This 
function or certain languages may not be 
available on all Blu-ray Discs/DVDs.
Information about the primary / secondary 
subtitle modes will also be displayed if the Blu-
ray Disc has a BONUSVIEW section.
This function changes both the primary and 
secondary subtitles at the same time.
The total number of subtitles is the sum of the 
primary and secondary subtitles.



1.
2.
3.
✎





FUNCTION
TV SOURCEPOWER
DVD RECEIVER/TV SLEEP
DISC MENU MENU TITLE MENU
MUTE
SFE MODE
VOLTUNING /CH
TOOLS
RETURN EXIT
INFO
A
B C DINTERNET @DSPMO/ST
REPEAT
1 2 3
4 5 6
7 8
09
POPUP
TUNER 
MEMORY