Panasonic Software DP-2310/3010/3510/3520/4510/4520/6010/6020 Document Management System And Printer Operating Instructions

							Installing the LPR (Line Printer Remote) Monitor
41
Windows 2000/XP
Printer Section
9Click the   button.
10Click the   button.
11Click the   button.
Click the   button.
The printer properties dialog box closes and 
you have now configured the printer as a 
network printer.
Finish
Close
Apply
OK 
						

							42
Configuring the Printer Driver Settings
To change the printer settings, open the dialog box for the printer properties by performing the following
steps.
Windows 98/Me
1
Click the Start button, select Settings, and then click
Printers.
2
Right-click on the desired printer icon in the Printers
folder, and select Properties in the popup menu.
The printer properties dialog box appears. 
						

							Configuring the Printer Driver Settings
43
Windows 98/Me
Printer Section
General Tab
1.Comment
Enter comments to the properties, if any.
If another user sets up this printer on his or her computer when sharing the printer, the comment specified
here will also appear on that computer. However, the comment displayed for an existing user will remain
unchanged even if the comment is modified later.
2.Separator page
This feature is not available on your machine.
3.  button
Prints a test page. This allows the user to verify if the printer is installed properly.
Print Test Page 
						

							Configuring the Printer Driver Settings
44
Windows 98/Me
Details Tab
1.Print to the following port
Displays either the port where the printer is connected or the path to the network printer.
To change the printing destination, either select the printing destination port from the list or enter the
network path here.
2.Print using the following driver
Displays the type of the printer driver. Specify the printer being used or a printer model which can be
emulated with the printer being used.
3. /   button
Assigns a local port to the network connected printer or cancels a local port assigned to the network
printer.
4.Timeout settings - Not selected
Specify the amount of time (in seconds) allowed to elapse before the printer comes online. If the printer is
not online within this duration, an error message will be displayed.
5.Timeout settings - Transmission retry
Specify the amount of time (in seconds) allowed to elapse before the printer is ready for printing. If the
printer is not ready for printing within this duration, an error message will be displayed.
Increase this value if a timeout error occurs when printing a large document.
6. /   button
Adds/deletes a new port or a new network path.
7. button
Updates or modifies the printer driver.
Capture Printer Port...End Capture...
Add Port...Delete Port...
New Driver... 
						

							Configuring the Printer Driver Settings
45
Windows 98/Me
Printer Section
8. button
Specify the method of sending (spooling) documents from the program to the printer.
•Spool Data Format
Select spool data type (EMF format or RAW format). Specifying RAW format results in a longer time
elapsing before an application becomes operational after printing from it.
Note: Spooling by EMF format (enhanced metafile compression) may cause the following problems on
some application software.
1) Printing result is different from the screen display.
2) Printing requires excessive time.
•Enable bidirectional support
This setting enables reception of configuration data and status data from the printer.
9. button
Modifies printer port settings.Spool Settings...
Port Settings... 
						

							Configuring the Printer Driver Settings
46
Windows 98/Me
Sharing Tab 
1.Not Shared/Shared As
Select whether to display or share this printer with other computers.
2.Share Name
Specify the name of the shared printer. The displayed name can be used as it is or a new name may be
entered. The name specified here will be displayed when other users view information about the printer
on the network.
3.Comment
You can enter comments regarding a shared printer (such as the type of printer and the location where it
is installed). When other users view information about the printer on the network, the comment specified
here will be displayed.
4.Password
Specify the password required when other users will connect to this printer.
Leave the box blank in order not to use any password.
NOTE1.Sharing Tab in property dialog box is not displayed unless printer sharing has been specified. 
						

							Configuring the Printer Driver Settings
47
Windows 98/Me
Printer Section
Device Options Tab (For DP-2310/3010)
1.Outer Option
  Select the installed outer option.
2.Inner Tray
Select Installed if the Inner Tray is installed.
3.Duplex Unit
Select Installed if the Duplex Unit is installed.
4.HDD
Select Installed if the HDD Unit is installed.
5. button
When your machine is connected onto the network (TCP/IP), click this button to set the Options
Configuration automatically.
6.Number of Paper Trays
Select the number of available paper trays if optional Paper Feed Module(s) are installed.
NOTE1Device Options  Tab specifies device-specific settings and settings of optional devices.
Auto Configuration 
						

							Configuring the Printer Driver Settings
48
Windows 98/Me
Device Options Tab (For DP-3510/3520/4510/4520/6010/6020)
1.Finisher
Select the type of the finisher if one is installed.
2.Punch Unit
Select Installed if the Punch Unit is installed.
3.Large Capacity Paper Tray (LCT)
Select Installed if the Large Capacity Paper Tray is installed.
4.HDD
Select Installed if the HDD Unit is installed.
5. button (DP-3520/4520/6020 only)
When your machine is connected onto the network (TCP/IP), click this button to set the Options
Configuration automatically.
6.Number of Paper Trays
Select the number of available paper trays if optional Paper Feed Module(s) are installed.
7.  button (DP-3520/4520/6020, For USA only)
Edit the URL address that will be displayed when clicking the   button of the
Paper Tab (see page 75).
Auto Configuration
Edit URL...
Support Contacts (W)... 
						

							Configuring the Printer Driver Settings
49
Windows 98/Me
Printer Section
NOTE1Device Options  Tab specifies device-specific settings and settings of optional devices.•URL Title
Enter an applicable URL title.
•URL
Enter the URL address to be associated to the
  button of the Paper Tab.
•Contact
Enter applicable contact information
(i.e.: The email address of the contact person)
Support Contacts (W)... 
						

							Configuring the Printer Driver Settings
50
Windows 98/Me
Paper/Output/Quality/Secure Tab 
Refer to All Windows Common Settings (see pages 74 - 81).