Panasonic Software DP-2310/3010/3510/3520/4510/4520/6010/6020 Document Management System And Printer Operating Instructions

							Installing the LPR (Line Printer Remote) Monitor
31
Windows 98/Me
Printer Section
6The M-LPR Port Monitor Setup dialog box 
appears.
Click the   button.
7The required files are copied.
8The setup program copies the necessary files onto
the hard disk of your PC.
When the setup process is completed, a message
is displayed prompting you to restart your
computer.
It is recommended that you restart your computer
now so that the LPR Monitor can be started.
Click the   button.
9If you have not installed the printer driver yet, please 
proceed to Installing the Printer Driver on page 12.
After your computer has rebooted, click the Start 
button, select Settings, and then click Printers.
The Printers folder appears.
Right-click on the desired printer icon and select 
Properties from the pop-up menu.
OK
Finish
Continued on the next page... 
						

							Installing the LPR (Line Printer Remote) Monitor
32
Windows 98/Me
10The printer properties dialog box appears.
The following step registers the LPR Port for network 
printing.
Before proceeding, ensure that the printer is 
installed, connected to the network, turned ON and is 
operating properly.
11Select the Details tab and click the   
button.
12The Add Port dialog box appears. Click the Other 
radio button, select M-LPR Port Monitor from Click 
the type of port you want to add: list, and click the 
 button.
Add Port...
OK 
						

							Installing the LPR (Line Printer Remote) Monitor
33
Windows 98/Me
Printer Section
NOTE1. To print data via LAN, the LPR Monitor must be installed on your PC.
13The M-LPR Port Monitor dialog box appears.
Type the IP Address of the machine in the 
Hostname or IP address window and the queue 
name (e.g. New105) in the Queue name: window.
Click the   button. If an error occurs 
because the queue name had already been used for 
the same IP Address, select a different unique name 
such as New106.
14The screen reverts to the Printer Properties.
Check that the Print to the following port: has been 
changed as entered in step 13, and click on the 
Apply button first and then the   button.
The printer properties dialog box closes and you 
have now configured the printer as a network printer.
OK
OK 
						

							Installing the LPR (Line Printer Remote) Monitor
34
Logon using an account with administrator rights.
Windows NT 4.0
1Click the Start button, select Settings, and click 
Control Panel.
The Control Panel window appears.
Double-click on the Network applet.
The Network dialog box appears.
2Click the Services tab.
Verify whether the LPR Service is already installed.
(Indicated by Microsoft TCP/IP Printing shown in the 
Network Services list.)
If it is already installed, skip to Step 7. Otherwise 
continue installing the LPR Service.
3Click the   button to display the Select 
Network Service dialog box, and select Microsoft 
TCP/IP Printing.
Click the   button.Add...
OK 
						

							Installing the LPR (Line Printer Remote) Monitor
35
Windows NT 4.0
Printer Section
4The Windows NT Setup dialog box appears.
Insert the Windows NT 4.0 CD-ROM, and type 
D:\i386 (where D: is your CD-ROM drive).
Click the   button.
5After the files have been copied into the hard drive of 
your PC, the display returns to the Network dialog 
box. Confirm that the Microsoft TCP/IP Printing 
service has been added to Network Services list.
Click the   button.
Note:
If the OK button does not change into a 
Close button, remove and reinstall the 
Microsoft TCP/IP Printing service. 
6When Network Settings Change dialog box is 
displayed, click the   button to restart 
your computer now.
You have now completed the LPR Service 
installation.
7After your computer has rebooted, logon with an 
account with Administrator Priviledges, click the Start 
button, select Settings, and then click Printers.
The Printers folder appears.
Right-click on the desired printer icon and select 
Properties from the pop-up menu.
Continue
Close
Yes
Continued on the next page... 
						

							Installing the LPR (Line Printer Remote) Monitor
36
Windows NT 4.0
8The following step registers the LPR Port for network 
printing.
Before proceeding, ensure that the printer is 
installed, connected to the network, turned ON and is 
operating properly.
Select the Ports Tab and click the    
button.
9The Printer Ports dialog box appears.
Select LPR Port and click the   
button.
10The Add LPR compatible printer dialog box 
appears.
Enter the IP Address of the printer in the upper field, 
and lp for the print queue name in the lower field.
Click the   button.
(Please wait while the wizard verifies the IP Address 
and connectivity to the network)
Add Port...
New Port
OK 
						

							Installing the LPR (Line Printer Remote) Monitor
37
Windows NT 4.0
Printer Section
11The Printer Ports dialog box appears.
Click the   button.
12Select the printer port and click the   
button.
The printer properties dialog box closes and you 
have now configured the printer as a network printer.
Close
OK 
						

							Installing the LPR (Line Printer Remote) Monitor
38
Logon using an account with administrator rights.
Windows 2000/XP
1Open the Printers folder.
Right-click on the desired printer icon and 
select Properties from the pop-up menu.
The printer properties dialog box appears.
2Select the Ports Tab and click the  
 button.
Add Port... 
						

							Installing the LPR (Line Printer Remote) Monitor
39
Windows 2000/XP
Printer Section
3Select Standard TCP/IP Port and click the 
 button.
4Click the   button.
5Enter the IP Address and the Port Name and 
click the   button.
Note:
The Port Name is automatically 
entered by Windows 2000/XP. You 
may need to change it as required.
New Port ...
Next
Next
Continued on the next page... 
						

							Installing the LPR (Line Printer Remote) Monitor
40
Windows 2000/XP
6Select Custom and click the   
button.
71. In the Protocol section, select LPR.
2. In the LPR Settings section, enter the 
Queue Name (e.g. LPR1) and select the 
LPR Byte Counting Enabled.
3. Click the   button.
8Click the   button.
Settings...
OK
Next