Palm Tungsten T3 Instructions Manual

							Controlling how Web Pro accesses the Internet
257
4.Use one or more of the following options:
NOTERemember that your handheld has a limited amount of memory. 
Choose a cache size that lets you store at least a few pages but still leaves room 
on your handheld for other data and applications. A value of at least 500KB is 
recommended.
5.Ta p  O K .
Controlling how Web Pro accesses the Internet
Because some wireless Internet service providers (ISPs) charge by the amount of 
data you download, Web Pro is careful to limit how often it accesses the Internet. 
If you have a faster or more permanent connection to the Internet, the default 
settings should work for you. 
If you have a slower or more expensive Internet connection, you can enable three 
settings that can help reduce your access costs.
To change connection settings:
1.Tap the Menu icon  .
2.Select Preferences from the Options menu.
3.Tap General.
4.Tap the check box next to the following options to enable or disable that option:
Clear CacheTap to clear the cache immediately.
Clear cache on exitSelect the check box to clear the cache each time you exit 
Web Pro. Deselect the check box to keep the cache from 
session to session.
Max. cache sizeTap to change the maximum cache size used to store web 
pages. The default size of the cache is 1,024KB and the 
maximum size is 9,999KB.
Offer old content if 
availableOld pages from cache are displayed instead of new 
versions being retrieved from the Internet, even if the old 
pages are outdated. A dialog box is displayed informing 
you when the page you are viewing is old.
Ask before 
connectingYou’re notified each time before you access the Internet.
Disconnect on ExitYour handheld disconnects from the Internet when you 
exit Web Pro. 
						

							Chapter 18 Using Palm™ Web Pro
258
By default, these options are disabled (that is, there are no checks in the check 
boxes).
5.Ta p  O K .
Changing Network Preferences
Web Pro includes many options you can use to change the way in which you access 
the network.
To change Network Preferences:
1.Tap the Menu icon  .
2.Select Network from the Options menu.
3.Change one or more of the following settings:
4.Ta p  D o n e .
Changing the proxy server
Using a proxy server reduces your data charges by downloading web pages faster. 
Your handheld comes with the proxy server turned on. You can turn the proxy 
server off, or configure some other proxy server. 
NOTENormal view of the web pages is only available when the proxy server is 
turned off. For more information on using the different display views, see “Changing 
display views” earlier in this chapter.
To turn on or off the proxy server or to configure another the proxy server:
1.Tap the Menu icon  .
2.Select Preferences from the Options menu.
3.Tap Advanced.
Always connect usingCheck if you always want to use the same ISP to connect 
to the Internet.
ServiceSelect the ISP you want to use to connect to the Internet. 
						

							Changing the proxy server
259
4.In the Use proxy server check box, do one of the following:
– To not use a proxy server, tap to remove the checkmark.
– To use a proxy server, tap to select it.
If you want to use a proxy server other than the default Palm hosted proxy 
server, enter the appropriate server address and port number. 
5.Ta p  O K . 
						

							Chapter 18 Using Palm™ Web Pro
260 
						

							261
CHAPTER 19
Using World Clock
World Clock enables you to view the current time and date in multiple 
locations and to set an alarm. 
To open World Clock:
1.Tap the Home icon  . 
2.Select the World Clock icon  .
TIPYou can also open World Clock by tapping the Clock icon   in the 
upper-left corner of the Graffiti® 2 input area and then tapping Go to Clock, or 
when your handheld is off, you can press Select on the navigator
 and then tap 
Go to Clock.
Viewing the time
There are several ways for you to easily check the current time and date.
To view the time:
Do one of the following:
nWhen your handheld is on, tap the Clock icon   in the upper-left corner of the 
Graffiti 2 input area.
Your handheld displays the time for two seconds and then returns to the 
previous application. 
						

							Chapter 19 Using World Clock
262
nWhen your handheld is off, press Select on the navigator. 
Your handheld turns on, displays the time, and then turns off after a few 
seconds.
nTap the Home icon  , and then select the World Clock icon  .
Setting the primary location
You can use World Clock to select the location, date, and time for the primary 
location. Keep in mind that the primary location settings are also your system date 
and time and that these settings are used by all the applications on your handheld. 
The primary location settings also appear in the Date & Time Preferences screen. 
Similarly, if you change the settings in the Date & Time Preferences screen, those 
settings become your system date and time and also appear under the primary 
location in World Clock. The primary location settings also serve as a point of 
reference for the secondary locations.
To set the primary location:
1.Tap the primary location pick list.
2.Tap the location you want to use as the primary location. 
The location you select is typically a large city in the same time zone as the one 
where you live. If an appropriate choice does not appear in the list, see “Adding 
a location” later in this chapter to create a new location.
3.Ta p  O K .
To set the date:
1.Tap Set Date & Time.
2.Tap the Set Date box.
Primary location 
pick list 
						

							Setting the primary location
263
3.Tap the arrows to select the current year.
4.Tap the current month.
5.Tap the current date.
6.Ta p  D o n e .
To set the time:
1.Tap Set Date & Time.
2.Tap the Set Time box.
3.Tap the up or down arrow to change the hour.
4.Tap each number of the minute, and then tap an arrow to change the minutes.
5.Ta p  O K .
6.Ta p  D o n e .
Tap to set date
Ta p  
arrows 
to 
select 
year
Tap to 
select 
month
Tap to select date
Tap to set time 
						

							Chapter 19 Using World Clock
264
Choosing a different primary location
If you travel to another location and you want alerts to appear based on local time, 
you need to change the primary location to update the system time.
To change the primary location:
1.Tap the pick list next to the current primary location.
2.Tap the location you want to use as the new primary location. 
If the new location is in another time zone, World Clock automatically updates the 
date and time in all the applications on your handheld.
Setting the secondary locations
The secondary locations display the date and time in two locations other than the 
primary location. 
To select a secondary locations:
1.Tap the pick list next to the secondary location.
2.Tap the location you want to use as the new secondary location. 
If an appropriate location does not appear in the list, see the next section, “Adding 
a location.”
Adding a location
If an appropriate location does not appear in the Location pick list, you can add a 
new location to the list. When you add a location, the default Time Zone and 
Daylight Saving settings are usually correct. However, you can adjust these 
settings if necessary. When the Daylight Saving options are active, the time change 
automatically occurs at 1:00 AM on the selected start and end dates.
Primary 
location 
pick list 
						

							Adding a location
265
To add a location:
1.Tap a Location pick list.
2.Select Edit List.
3.Tap Add.
4.Select a location that is in the same time zone as the city you want to add.
5.Ta p  O K .
6.(Optional) Tap the Name field and modify the location name.
7.(Optional) Tap the Time Zone box and select a time zone.
8.Ta p  O K .
9.Ta p  D o n e .
To set Daylight Saving options:
1.From the Edit Location dialog box, tap the This location observes Daylight 
Saving Time check box to select it.
2.Tap the Start box.
3.Tap the month when daylight saving begins.
4.Tap the Week pick list.
5.Select the week when daylight saving begins within the selected month.
6.Tap the Day pick list. 
						

							Chapter 19 Using World Clock
266
7.Select the day of the week when daylight saving begins within the selected 
week.
8.Ta p  O K .
9.Tap the End box and repeat steps 3 through 8 to select when daylight saving 
ends.
10 .Tap OK.
Modifying a location
You can edit the location information. 
To modify a location:
1.Tap a Location pick list.
2.Select Edit List.
3.Select the location you want to modify.
4.Tap Edit.
5.Adjust the settings. See “Adding a location” earlier in this chapter for details.
6.Ta p  O K .
7.Ta p  D o n e .
Removing a location
You cannot remove a location that is currently assigned to the primary location.
To remove a location:
1.Tap a Location pick list.
2.Select Edit List.
3.Select the location you want to remove.
4.Ta p  R e m o v e .
5.Tap OK to confirm the deletion.
6.Ta p  D o n e .