NEC Xen Alpha Features And Specifications Manual

							Features & Specifications, Flexible TimeoutF-5, Page 115A6-506000-642-02
Hookflash End Time 
Selection
504 – Single Line 
Telephone Hookflash 
End TimeSpecifies the maximum duration that 
a Single Line telephone has to 
receive dial tone. The times are 
added to the Hookflash Start Time. 
For example, if the Hookflash Start 
Time (HST) = 1 and the Hookflash 
End Time (HET) = 1, add 150 ms. 
and 100 ms. to determine the 
maximum duration.
(HST + HET = Max. Hookflash 
Duration)0 = 0 ms 5 = 700 ms
1 = 100 ms (D) 6 = 900 ms
2 = 200 ms 7 = 1.1 sec
3 = 400 ms 8 = 1.3 sec
4 = 500 ms 9 = 1.5 sec
Hookflash Start Time 
Selection
503 – Single Line 
Telephone Hookflash 
Start Time Specifies the minimum hookflash 
duration from a Single Line 
telephone.0 = 100 ms (D) 5 = 450 ms
1 = 150 ms 6 = 550 ms
2 = 200 ms 7 = 650 ms
3 = 300 ms 8 = 750 ms
4 = 350 ms 9 = 850 ms
Hookflash Time 
Selection:
(Multiline Telephone)
006 – Hookflash 
DurationSpecifies the break time (the break of 
the DC loop of a CO/PBX line) sent 
to the central office or PBX when the 
recall key is pressed.0 = 60 ms 5 = 600 ms
1 = 100 ms (D) 6 = 800 ms
2 = 140 ms 7 = 1.0 sec
3 = 200 ms 8 = 1.5 sec
4 = 400 ms 9 = 2.0 sec
Incoming Outside 
Ringing Delay Time
301
 → 306 – Day 
Ringing for Trunk 
Lines 1
 → 6
311
 → 316 – Night 
Ringing for Trunk 
Lines 1
 → 6Specifies time delay that elapses 
before ringing sounds for external 
incoming calls.0 = 0 sec (D) 4 = 60 sec
1 = 10 sec 5 = No Ring
3 = 30 sec
Pause Time 
Selection
FixedSpecifies the length of the pause 
inserted between the digits dialed on 
external (CO/PBX) lines.3 sec
Prepause Time 
Selection
FixedSpecifies the pause time inserted 
after dial access to an external (PBX 
trunk) line.1 sec
Time Display (12h/
24h) Selection
002-7 – Time Format 
for Telephone 
DisplaySpecifies whether the clock on the 
telephone displays the time in 12 
hour format (12:00 a.m. to 11:59 
p.m.) or 24 hour format (0:00 to 
23:59).7 = 12 hour (D)
– = 24 hour 
Trunk Queuing 
Recall Time 
Selection
FixedSpecifies the interval during which 
the telephone that is enabled for 
queuing is called. After the timer 
expires, the queue is automatically 
canceled.10 sec
Timer/FunctionDefinitionTiming Value 
						

							This page is intentionally blank.
Page 116, F-5Features & SpecificationsA6-506000-642-02 
						

							Features & Specifications, Full Handsfree OperationF-6, Page 117A6-506000-642-02
Xen AlphaRelease 1.0
F-6Full Handsfree Operation
FEATURE
DESCRIPTION
Multiline telephones allows the user to make and answer calls without using the handset.
Users can talk using the telephone’s built-in microphone (the microphone must be
turned on).
S
TATION
APPLICATION
This feature is available for all Multiline telephones.
O
PERATION
PROCEDURE
 
1. Press  
O.
2. Dial  
A. 
Note:This operation toggles the microphone on/off. The microphone LED is red if the
microphone is on.
 
1. Press  
N.
2. When you hear dialtone, dial the 2-digit extension number, e.g.  
A A.
3. When the party answers, begin speaking. 
When the call is received, ensure the microphone LED is on and begin talking.
1. Press  
V  (line key assigned to seize an external line), or dial a trunk access code
(e.g. 0).
2. When you hear dialtone, dial the telephone number.
3. When the party answers, begin speaking.
1. Press  
R.
2. When the party answers, begin speaking using the built-in speaker.
Turning the microphone on:
Making an internal call:
Answering an internal call:
Making an external call:
Answering an external call: 
						

							Page 118, F-6Features & Specifications, Full Handsfree OperationA6-506000-642-02
RELATED
PROGRAMMING
All programming functions associated with this feature are listed in the following table. Some
functions must be programmed before the feature is operational and other functions are
optional. The optional functions can affect how the feature operates. 
Function 
NumberFunction Name
Required
(Y)es or
(N)o
216 Handsfree Assignment Y 
						

							Features & Specifications, Handset Microphone ControlP-1, Page 119A6-506000-642-02
Xen AlphaRelease 1.0
H-1Handset Microphone Control
FEATURE
DESCRIPTION
When making a call, users can mute the transmission speech path. This allows the user to
continue to hear the other party, but the other party cannot hear their conversation. Mute is
reset (to off) when the call is terminated or it can be manually reset during a call.
S
TATION
APPLICATION
This feature is available for all Multiline telephones.
O
PERATION
PROCEDURE
 
1. Press  
O.
2. Dial  
B (toggles between on/off).
S
ERVICE
CONDITIONS
!If handset microphone control is set while a call is in progress, it automatically resets
when the user hangs up. 
!Handset microphone control automatically resets when an internal or external call is
placed on hold.
!This feature can be assigned to a one-touch/feature access key. (Refer to One-Touch/
Feature Access Keys – User Programmable, Page 171.)
!When the handset microphone control feature is set/reset, one of the following
messages is displayed: Set = Mute On/Reset = Mute Off.
Setting and resetting handset mute: 
						

							This page is intentionally blank.
Page 120, P-1Features & SpecificationsA6-506000-642-02 
						

							Features & Specifications, Handsfree AnswerbackP-2, Page 121A6-506000-642-02
Xen AlphaRelease 1.0
H-2Handsfree Answerback
FEATURE
DESCRIPTION
This feature allows users of Multiline telephones to answer internal voice announced calls
when the microphone is turned on. 
S
TATION
APPLICATION
This feature is available for all Multiline telephones.
O
PERATION
PROCEDURE
 
1. Press  
O.
2. Dial  
A (access code). The microphone is activated/deactivated.
R
ELATED
PROGRAMMING
All programming functions associated with this feature are listed in the following table. Some
functions must be programmed before the feature is operational and other functions are
optional. The optional functions can affect how the feature operates. 
Turning the microphone on/off:
Function 
NumberFunction Name
Required
(Y)es or
(N)o
216 Handsfree Assignment Y 
						

							This page is intentionally blank.
Page 122, P-2Features & SpecificationsA6-506000-642-02 
						

							Features & Specifications, Handsfree Dialling and MonitoringP-3, Page 123A6-506000-642-02
Xen AlphaRelease 1.0
H-3Handsfree Dialling and 
Monitoring
FEATURE
DESCRIPTION
A telephone feature which allows the user to place external calls and listen to the progress
of those calls without lifting the handset on the telephone. 
S
TATION
APPLICATION
This feature is available for all Multiline telephones.
O
PERATION
PROCEDURE
 
1. Press the line key to access an outside line.
2. Dial the party’s telephone number. When the called party answers you can either
remain off-hook and talk through the telephone speaker or you can lift the handset. 
 
1. Press  
N.
2. Dial the party’s extension number. When the called party answers you can either
remain off-hook and talk through the telephone speaker or you can lift the handset. 
R
ELATED
PROGRAMMING
All programming functions associated with this feature are listed in the following table. Some
functions must be programmed before the feature is operational and other functions are
optional. The optional functions can affect how the feature operates. 
Placing an outside call:
Placing an internal call:
Function 
NumberFunction Name
Required
(Y)es or
(N)o
216 Handsfree Assignment Y 
						

							This page is intentionally blank.
Page 124, P-3Features & SpecificationsA6-506000-642-02