Lucent Technologies DEFINITY Enterprise Communications Server, System 75, System 85 Instructions Manual

							Introduction
1-1 The Purpose of This Manual
1
DEFINITY Enterprise Communications Server and System 75 and System 85
Terminals and Adjuncts Reference
555-015-201Issue 11
December 1999
1
Introduction
The Purpose of This Manual
Voice terminals and adjuncts are voice and data devices that are connected to the
system switch in a business communications system. This manual provides
concise physical and functional descriptions of the voice terminals/telephones,
adjuncts, and data modules that can be used with the DEFINITY
®
Communications System Generic 1, Generic 2, and Generic 3, the DEFINITY®
Enter prise Communications Server (ECS), Release 5, Release 6, and Release 7,
System 75, and System 85. The book is intended as an aid for both Lucent
Technologies and customer personnel in selecting appropriate components for
these systems and for the training of personnel and management of the system.
This issue replaces all previous issues of this document. The reason for reissue is
to add more information on the items included in previous issues of this document
and to include the following new items:
nThe modular 6416D+M and 6424D+M telephones
nThe 100A Tip/Ring Interface Module which can be connected with the
modular 6416D+M and 6424D+M telephones
nThe CALLMASTER®V console
nThe new 6200 Series analog telephones which include the 6210, 6218,
and 6220 telephones. The 6201 and 6230 which appeared in the last issue
have been removed since, at the last moment, it was decided that these
two models would not be par t of the 6200 Series analog telephone offer.
nThe 2500 MMGN, 2500 YMGP, 2554 MMGN, and the 2554 YMGP analog
telephones
nThe MDW 9031DCP Wireless Pocket Phone 
						

							DEFINITY Enterprise Communications Server and System 75 and System 85
Terminals and Adjuncts Reference
555-015-201Issue 11
December 1999
Introduction
1-2 The Purpose of This Manual
1
In Issue 3, three new sections were added and have since been maintained to
reflect new products that have been introduced. TheExposed Port Protection
section discusses the different protection required for lightning protection. The
Adjunct Powersection discusses the different types of adjunct power supplies
available. TheAdministrationsection discusses how to administer some of the
newer terminals when the software of the version switch being used does not
contain the proper administration procedures for the new terminal.
NOTE:
Issue 3 and subsequent issues of this document also had an Availability
chapter which listed the availability of each terminal and adjunct described
in this book. However, interpretations of the meaning of “availability” differed
among the readers of this manual, and, therefore, the chapter raised more
questions than it provided meaningful information. As a result, in this issue,
the Availability chapter has been omitted. However, information on whether
the product is still being manufactured continues to appear in the subsection
on each individual terminal or adjunct. If questions about availability of any
Lucent Technologies product remain, contact your local account executive.
The equipment covered in this manual includes the following specific groups:
nTelephones/Voice Terminals
nAdjuncts used with the voice terminals to enhance voice operations
nData Modules (adjuncts that suppor t data operations)
nPC Platforms (PC/PBX) and Application Software
Attendant consoles, applications processors (APs), printers, and data terminals
used with APs are not described in this manual.
Figure 1-1 shows a typical arrangement of terminals and adjuncts connected to
the system switch. 
						

							DEFINITY Enterprise Communications Server and System 75 and System 85
Terminals and Adjuncts Reference
555-015-201Issue 11
December 1999
Introduction
1-3 The Purpose of This Manual
1
Figure 1-1. Interface Between System Switch and Typical Terminals/Adjuncts
DataData
Module
DataData
ModuleTo Private
Data
Vo i c e / D a t a Vo i ce
Data
TerminalData
UnitEIA
Por t Data Data
Digital
Po r t Digital Switch
Vo i ceAdjunct
Digital
Voice
Terminal
Vo i c e / D a t a Vo i ce Analog
Vo i ce
Terminal
Hybrid
Vo i ce
TerminalDisplay/
Keyb oa rd
Data Terminal
with Voice
Digital
Vo i ce
Terminal
Data
Module
Adjunct
Analog
Por tDigital
Po r t
Hybrid
Por tDigital
Po r t
Data
Data
Terminal
Data Vo i ceDigital
Vo i ce
Terminal
AdjunctDigital
Por tDigital
Po r tData
ModuleData
Terminal Data
Digital
Po r tLine Trunk
Facil iti es
Analog Data Vo i c e /
TerminalDCP PC/PBX
Digital
Por tAnalog
Po r tModem Data
Digital
Po r tRS-232
Data 
						

							DEFINITY Enterprise Communications Server and System 75 and System 85
Terminals and Adjuncts Reference
555-015-201Issue 11
December 1999
Introduction
1-4 The Organization of This Manual
1
The Organization of This Manual
The remainder of this manual is divided into nine main sections; tabs are provided
for convenient access to each section. All equipment descriptions are supported
by illustrations.
General Information —Gives background data that applies to the entire range of
equipment covered in this manual.
Exposed Port Protection —Contains information on the protection required by
exposed por ts. This section also lists some of the Lucent Technologies protection
devices and gives parameters that non-Lucent Technologies devices must meet.
Adjunct Power —Lists the different terminals and adjuncts that require adjunct
power supplies and the recommended adjunct power supply. Information has also
been provided about the MSP-1 local power supply and, more recently, about the
1151A1 and the 1151A2 with Batter y Holdover which has replaced the MSP-1.
Administration —When some of the newer terminals are used with some older
versions of the switches, the administration of the switch does not allow for the
use of the new terminals. These new terminals must be administered using the
administration procedures of a similar older terminal. This is called aliasing. This
section contains the aliasing information and the appropriate caveats.
Voice Terminals —Provides detailed coverage of the main groups of voice
terminals, divided into 13 tabbed subsections. This section contains detailed
information on each voice terminal that can be ordered as a component of a
DEFINITY switch, System 75, or System 85. It also contains brief descriptions of
voice terminals that were previously installed in earlier business communications
systems. Before you install the voice terminal or telephone, check each
description to see if these voice terminals are compatible with a DEFINITY G1,
G2, or G3, a DEFINITY ECS, System 75, or System 85. 
						

							DEFINITY Enterprise Communications Server and System 75 and System 85
Terminals and Adjuncts Reference
555-015-201Issue 11
December 1999
Introduction
1-5 The Organization of This Manual
1
The 13 tabbed subsections and the voice terminals described in each subsection
are listed as follows:
6400 SERIES
Models 6402 and 6402D
Models 6408+ and 6408D+
Models 6416D+ and 6416D+M
Models 6424D+ and 6424D+M
7100 SERIES
Model 7101A
Models 7102A and 7102 Plus
Models 7103A Fixed Feature and
7103A Programmable
Model 7104A
7200 SERIES
Model 7203H
Model 7205H
7300 SERIES
Model 7303S
Model 7305S
7400 SERIES
Model 7401D
Model 7401 Plus
Model 7402 Plus
Model 7403D
Model 7404D
Model 7405D
Model 7406D
Model 7406 BIS
Model 7406 Plus
Model 7407D
Model Enhanced 7407D
Model 7407 Plus
Model 7410D
Model 7410 Plus
Model 7434D
Model 7444
8400 SERIES
Model 8403
Model 8405
Model 8410
Model 8411
Model 8434 and 8434DXCALLMASTER
602 CALLMASTER
CALLMASTER II
CALLMASTER III
CALLMASTER IV
CALLMASTER V
CALLMASTER VI
500/2500 SERIES
Model 500 Series
Model 2500 Series
Model 2500 DMGC
Model 2500 YMGK
Models 2500 MMGL and 2500 MMGM
Models 2500 YMGL and 2500 YMGM
Models 2500 YMGN and 2500 YMGP
6200 SERIES
Model 6210
Models 6218 and 6220
8100 SERIES
Models 8101 and 8102M
Models 8102 and 8102M
Models 8110 and 8110M
ISDN VOICE TERMINALS
Model 7505 ISDN
Model 7506 ISDN
Model 7507 ISDN
Model 8503T ISDN
Model 8510T ISDN
Model 8520T ISDN
CORDLESS/WIRELESS TELEPHONES
MDC 9000 Cordless Telephone
MDW 9000 Wireless Telephone
MDW 9031DCP Wireless Pocket Phone
OTHER
Voice terminals reusable
from other systems:
Models 7203H, 7303H,
7305H01B, and 7305H02B
Multi-Button Electronic
Telephone (MET) Sets 
						

							DEFINITY Enterprise Communications Server and System 75 and System 85
Terminals and Adjuncts Reference
555-015-201Issue 11
December 1999
Introduction
1-6 The Organization of This Manual
1
Adjuncts —Contains information on the devices that can be used with voice
terminals to supplement ser vices and features. This section contains information
on the controls, buttons, lights, and functions of a DEFINITY G1, G2, and G3, a
DEFINITY ECS, System 75, or System 85 voice terminals and telephone
adjuncts. Adjuncts that are identical in appearance and function, but have different
codes, are covered under the same heading. Adjuncts that are basically data
modules are covered in theData Modulessection in this manual.
The adjuncts covered in this section are:
Call Coverage Modules Message Waiting Indicator
Digital Display Module Speakerphones
Function Key Module Loudspeaker
Expansion Modules Messaging Cartridge
Tip/Ring Interface Module Automatic Dialer
Headset Adapters
Data Modules —Contains information on the devices that provide data
communications interface. This section contains information on the data modules
and other related data equipment used with a DEFINITY G1, G2, and G3, a
DEFINITY ECS, System 75, or System 85. These devices provide data interface
functions which include modems, protocol converters, and data units.
The data modules covered in this section are:
–7400A Data Module –Modular Processor Data
–7400B and 7400B Plus Module (MPDM)
Data Module –Modular Trunk Data
–7400D Data Module Module (MTDM)
–7500B Data Module –3270 Data Module
–8400B Plus Data Module –Asynchronous Data Unit (ADU)
–ISDN Asynchronous Data –Multiple Asynchronous Data
Module (ADM) Unit (MADU)
–Digital Terminal Data –DCIU Interface Units
Module (DTDM) –2500-SERIES Data Service Unit
–Z702AL1 Data Service Unit –Modems (Data Sets)
–703A Data Service Unit –Local Distribution Service
–DEFINITY High Speed Link (HSL) Unit (LDSU)
–Processor Data Module (PDM) –Isolating Data Interface (DI)
–Trunk Data Module (TDM) –Protocol Converters
PC Platforms (PC/PBX and PC/ISDN) and Application Software —Contains
information on the different PC/PBX Platforms, the PC/PBX Connection, and
E78 Plus
®/ISDN.
Blank Templates for Model Design —Includes blank templates of voice
terminal faceplates on which the Software Associate can designate the numbers,
feature codes, or features to be administered on each voice terminal button. 
						

							General Information
2-1 Voice Terminals
2
DEFINITY Enterprise Communications Server and System 75 and System 85
Terminals and Adjuncts Reference
555-015-201Issue 11
December 1999
2
General Information
This section provides general information on all of the equipment described in this
manual. Information is provided on voice terminals, adjuncts, data modules, and
data terminals. Detailed information on these types of equipment can be found
behind the tab for each particular type of equipment.
Voice Terminals
The advanced, multi-appearance voice terminals combine the capabilities of both
a telephone and a terminal and have a variety of controlling and monitoring
functions. While providing basic telephone ser vice (placing and answering calls),
voice terminals can also be used to activate the advanced features of the system.
This par t explains higher level topics that apply to voice terminals as a group and
contains descriptions of facilities and characteristics that are common to all or
most terminals. Table 2-1 presents a summary of all voice terminals used with a
DEFINITY G1, G2, and G3, a DEFINITY ECS, System 75, and System 85.
The complete line of voice terminals are two basic types,
single-line voice
terminals
andmulti-appearance voice terminals.The operational differences
between these types are in the way they access features and the way they receive
calls. 
						

							DEFINITY Enterprise Communications Server and System 75 and System 85
Terminals and Adjuncts Reference
555-015-201Issue 11
December 1999
General Information
2-2 Voice Terminals
2
Single-Line Voice Terminals
The term “single-line” means that only one incoming call can be ringing at an idle
terminal. Once an incoming call has been answered, however, a single-line voice
terminal can handle both the active call and another call on hold or waiting. When
a single-line terminal user is busy on a call, an incoming call does not ring but
aler ts the user via a “call waiting tone” (in the handset or speakerphone) that a call
is waiting to be answered. While a single-line terminal is occupied with two calls,
any other calls placed to the terminal get a busy tone.
All single-line voice terminals are analog in operation; that is, transmission of all
signals between the terminal and its por t, at the system digital switch, is in analog
form over a tip and ring pair of wires. The por t circuit provides analog/digital signal
conversion. Power for these terminals is supplied from the switch on the single
voice pair. Single-line terminals have many applications but are more limited in
their access to system features than multi-appearance terminals.
Multi-Appearance Voice Terminals
A multi-appearance voice terminal gives its user much more flexibility in handling
calls than a single-line voice terminal. A multi-appearance voice terminal,
represented by a unique primary extension number, has multiple call appearances
(buttons with lights) where incoming calls to the number can be answered and
outgoing calls can be originated. Incoming calls can ring simultaneously at all
appearances except for those translated as originate-only. As long as at least one
appearance is idle, callers will not receive busy tone. When all call appearances,
except call appearances translated as originate-only, are busy, callers will hear
busy tone unless the incoming call is a priority call or the Restrict Last
Appearance feature is deactivated. The terminal user must decide the order to
answer multiple incoming calls.
The two sub-types of multi-appearance voice terminals are digital and hybrid.
Digital terminals generate and receive voice and control signals in digital form.
Connection between terminals and the system switch is over 2-pair digital links;
no conversion is necessary at the digital line port. Hybrid terminals, as the name
implies, combine analog and digital. They are connected to the system switch by
three pairs of links; on MET
*-like hybrid sets, one pair is for analog voice, and the
other two pairs are for digital control signals, and on ATL†-like hybrid sets, one pair
is for digital control signals, and the other two pairs are for analog voice. DC power
for all multi-appearance terminals (except for the 7404D and 7407D01B, which
are AC powered) is conducted from the switch over the digital pairs.
Digital multi-appearance voice terminals have several impor tant advantages over
hybrids:
* The Multi-Button Electronic Telephone (MET) sets are described in Chapter 19, “Other
Voice Terminals.”
† Analog Terminal Loop (ATL) protocol is used predominantly in MERLIN telephone sets. 
						

							DEFINITY Enterprise Communications Server and System 75 and System 85
Terminals and Adjuncts Reference
555-015-201Issue 11
December 1999
General Information
2-3 Voice Terminals
2
nDigital voice terminals can suppor t and control data terminals.
nThe Digital Communications Protocol (DCP) or ISDN-BRI interface
between a digital voice terminal and the system switch supports
simultaneous voice and data calls over the terminal’s standard mounting
cord.
nDigital terminals have a wider selection of adjuncts.
nCall information displays are available with some digital voice terminals. 
						

							DEFINITY Enterprise Communications Server and System 75 and System 85
Terminals and Adjuncts Reference
555-015-201Issue 11
December 1999
General Information
2-4 Voice Terminals
2
Table 2-1. Voice Terminals Usable with DEFINITY, System 75, 
and System 85 
Type Model
Single-Line Analog 2500 Series
2500 DMGC
2500 YMGK/2500 YMGL/2500 YMGM
2500 MMGL/2500 MMGM, 2500 MMGN/2500 YMGP
6210, 6218, 6220
7101A
7102A, 7102 Plus
7103A Fixed Feature and 7103A Programmable
7104A (usable only with DEFINITY G1 and System 75)
8101, 8101M, 8102, 8102M, 8110, and 8110M
Multi-Appearance Hybrid 7203H (usable only with DEFINITY G2 and System 85)
7205H (usable only with DEFINITY G2 and System 85)
7303S
7305S
Single-Appearance Digital 6402 and 6402D
7401D and 7401 Plus
These four models (have two virtual
*appearances,
but no call appearance buttons)
Multi-Appearance Digital 6408, 6408+, 6408D, 6408D+, 6416D+, 6416D+M, 6424D+, and 6424D+M
7402 Plus
7403D, 7404D, 7405D
7406D, 7406BIS, 7406 Plus
7407D, Enhanced 7407D, 7407 Plus
7410D, 7410 Plus
7434D
7444
8403, 8405, 8410, 8411, 8434, and 8434DX
602A, 602D CALLMASTER
CALLMASTER II with Recorder Interface
CALLMASTER III without Recorder Interface
CALLMASTER IV
CALLMASTER V
CALLMASTER VI
ISDN Terminals 7505, 7506, 7507 (usable only with DEFINITY)
8503T, 8510T, 8520T (usable only with DEFINITY G2 and G3)
Cordless and Wireless MDC 9000 Cordless Telephone
MDW 9000 Wireless Telephone
Continued on Next Page
REUSABLE FROM EARLIER SYSTEMS