Home
>
Lucent Technologies
>
Communications System
>
Lucent Technologies DEFINITY Enterprise Communications Server, System 75, System 85 Instructions Manual
Lucent Technologies DEFINITY Enterprise Communications Server, System 75, System 85 Instructions Manual
Have a look at the manual Lucent Technologies DEFINITY Enterprise Communications Server, System 75, System 85 Instructions Manual online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 413 Lucent Technologies manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.
DEFINITY Enterprise Communications Server and System 75 and System 85 Terminals and Adjuncts Reference 555-015-201Issue 11 December 1999 The 7300 Series Voice Terminals 10-5 The 7303S Voice Terminal 10 Distance Limitations The maximum allowable distances of a 7303S voice terminal from the DEFINITY G1, G2, and G3, DEFINITY ECS, System 75, or System 85 cabinet are shown in the table below. Note: Range may be extended to 2,000 feet (610m) for 24- or 26-AWG wire by adding local -48 volt DC power in the satellite closet. Power supplies such as the 346A or 329A may be connected to the fourth pair from the terminals to obtain the increased range. These power supplies must be within 250 feet of the terminals. Power Requirements The 7303S voice terminal is powered by the tip and ring leads.If the 7303S is equipped with an adjunct, it is powered by the same power source. This impacts the maximum nominal cabling distance. The range may be extended by adding a -48 volt DC power source in the satellite closet. Power Failure Operation The 7303S voice terminal cannot be used as an emergency station during power failure transfer conditions. FCC Registration The 7303S voice terminal is not FCC registered. Table 10-1. Distance Limitations for the 7303S Voice Terminal SystemPort BoardNumber of AdjunctsNominal Maximum Range in Feet (Meters) (See Note) 24 AWG 26 AWG System 85 ANN17B 0 1,700 (519) 1,000 (305) 1 1,000 (305) 650 (198) DEFINITY G2 ANN17B 0 1,700 (519) 1,000 (305) 1 1,000 (305) 650 (198) TN762B – 1,000 (305) 750 (229) DEFINITY G1 and G3, DEFINITY ECS, and System 75TN762 – 1,000 (305) 750 (229)
DEFINITY Enterprise Communications Server and System 75 and System 85 Terminals and Adjuncts Reference 555-015-201Issue 11 December 1999 The 7300 Series Voice Terminals 10-6 The 7303S Voice Terminal 10 Hearing Aid Compatible The 7303S voice terminal is compatible with the inductively coupled hearing aids prescribed by the FCC. 7303S Equipment PECs The 7303S voice terminal and optional components were ordered with the following PECs: nBasic 7303S Voice Terminal — 3176-16S/CLR nHandset cord (12 feet — 2725-01L COL09 nLine cord (14 feet, silver) — 2725-07N COL18 nLine cord (25 feet, silver) — 2725-07S COL18 Adjuncts One of the following adjuncts can be used with this voice terminal: nS102A Speakerphone nS202A Speakerphone n502A Headset Adapter and a standard headset Additional Documents The following documents contain additional information relating to the 7303S voice terminal: nDEFINITY Generic 2, System 85 7303S Voice Terminal User’s Guide, 555-103-707 nDEFINITY Generic 1, System 75 7303S Voice Terminal User’s Guide, 555-200-706 nDEFINITY Generic 1 and Generic 2, System 75, and System 85 Terminals and Adjuncts Installation and Test , 555-015-104
DEFINITY Enterprise Communications Server and System 75 and System 85 Terminals and Adjuncts Reference 555-015-201Issue 11 December 1999 The 7300 Series Voice Terminals 10-7 The 7305S Voice Terminal 10 The 7305S Voice Terminal Figure 10-2. The 7305S Voice Terminal The 7305S voice terminal is a multi-appearance hybrid voice terminal which provides access to 10 line appearances. The 10 line appearance buttons can also be used as programmable feature buttons. The 7305S voice terminal is also equipped with 24 programmable feature buttons and six fixed feature buttons. It requires 3-pair wiring for operation. One wire pair is used for analog voice, while the other two pairs are used for digital control and signaling. NOTE: The 7305S voice terminal was discontinued in July 1990. Handset 1 23 45 6 78 9ABC DEF MN O JKL GHI PRS TUV WXY *O#Oper Conference DropTransfer Hold 10 Call Appearance/ MessageSpeaker Dial Pad Message Speaker Light Hold ButtonTransfer Conference Drop Button Vo l u m e Control (on leftLightSpeaker Button ButtonFeature Buttons side) Button Recall Self-Test Switch (on left side of base) Recall Button24 Feature Buttons
DEFINITY Enterprise Communications Server and System 75 and System 85 Terminals and Adjuncts Reference 555-015-201Issue 11 December 1999 The 7300 Series Voice Terminals 10-8 The 7305S Voice Terminal 10 Applications The 7305S voice terminal can be used with the DEFINITY Communications System Generic 1, Generic 2, and Generic 3, the DEFINITY ECS, System 75, and System 85 (R2V2 or higher). This voice terminal is suitable for managers, executive secretaries, office suppor t personnel, sales suppor t people, and others who do not need data capabilities. Physical Description Dimensions NOTE: The following dimensions are approximate. Width = 10-1/4 inches Depth (front to back) = 8-3/4 inches Height (maximum with handset in place) = 6-1/4 inches Thickness of housing = 1-1/2 inches Features Six Fixed Feature Buttons nRECALL button nSPEAKER button nCONFERENCE button nDROP button nTRANSFER button nHOLD button Message Light The green Message light goes on when a message is left for the user. It goes off when the user retrieves the message. Call Appearance/Feature Buttons The 7305S voice terminal has 10 call appearance/feature buttons. Adjacent to each button is pair of red and green indicator lights.
DEFINITY Enterprise Communications Server and System 75 and System 85 Terminals and Adjuncts Reference 555-015-201Issue 11 December 1999 The 7300 Series Voice Terminals 10-9 The 7305S Voice Terminal 10 Feature-Only Buttons The 7305S voice terminal has 24 feature-only buttons. Adjacent to each button is a green (status) indicator light. Self-Test The 7305S voice terminal is equipped with a self-test for its buttons and tone ringer. The self-test switch is located on the left side of the base. Loudspeaker The 7305S voice terminal has a built-in listen only loudspeaker. The volume control for the speaker is the same control used for the tone ringer volume. It is located on the left side of the housing. Other Physical Features Handset The 7305S voice terminal is equipped with an R-type handset. Dial pad The 7305S voice terminal has a 12-button touch-tone dial pad. Jacks The 7305S voice terminal housing contains three jacks. The handset cord jack is just under the left side of the housing. (The handset contains a jack for the other end of the handset cord.) The line jack is on the bottom center of the housing. The modular speakerphone/handset jack is located on the bottom of the set. Cords Two cords are supplied with the 7305S voice terminal: a coiled 7-foot modular handset cord and a 7-foot modular line cord. Optional longer cords are available: a 12-foot handset cord, and 14-foot and 25-foot line cords. Ringing The 7305S voice terminal has electronic tone ringing. The volume control is on the left side of the housing. Mounting Options The 7305S voice terminal comes equipped with a adjustable desk stand. An optional wall-mounting kit can be ordered. Color Options The 7305S voice terminal was available in black and misty cream.
DEFINITY Enterprise Communications Server and System 75 and System 85 Terminals and Adjuncts Reference 555-015-201Issue 11 December 1999 The 7300 Series Voice Terminals 10-10 The 7305S Voice Terminal 10 Distance Limitations The maximum allowable distances of a 7303S from the DEFINITY G1, G2, and G3, the DEFINITY Enterprise Communications System (ECS), System 75, or System 85 cabinet are shown in the table below. NOTE: Range may be extended to 2,000 feet (610m) for 24- or 26-AWG wire by adding local -48 volt DC power in the satellite closet. Power supplies such as the 346A or 329A may be connected to the fourth pair from the terminals to obtain the increased range. These power supplies must be within 250 feet of the terminals. Power Requirements The 7305S voice terminal is powered by the tip and ring leads. If the 7305S voice terminal is equipped with the S202A or S102A speakerphone or the 500A headset adapter, auxiliary power will be required for the adjunct. Refer to theAdjunct Pow ersection earlier in this manual. Power Failure Operation The 7305S voice terminal cannot be used as an emergency station during power failure transfer conditions. FCC Registration The 7305S voice terminal is not FCC registered. Table 10-2. Distance Limitations for the 7305S Voice Terminal SystemPort BoardNumber of AdjunctsNominal Maximum Range in Feet (Meters) (See Note) 24 AWG 26 AWG System 85 ANN17B 0 1,000 (305) 650 (198) 1 700 (213) 450 (137) DEFINITY G2 ANN17B 0 1,000 (305) 650 (198) 1 700 (213) 450 (137) TN762B – 1,000 (305) 750 (229) DEFINITY G1 and G3, DEFINITY ECS, and System 85TN762 – 1,000 (305) 750 (229)
DEFINITY Enterprise Communications Server and System 75 and System 85 Terminals and Adjuncts Reference 555-015-201Issue 11 December 1999 The 7300 Series Voice Terminals 10-11 The 7305S Voice Terminal 10 Hearing Aid Compatible The 7305S voice terminal is compatible with the inductively coupled hearing aids prescribed by the FCC. 7305S Equipment PECs The 7305S voice terminal and optional components were ordered with the following PECs: nBasic 7305S Voice Terminal (black) — 3177-40SA/CLR nHandset cord (12 feet) — 2725-01L COL09 nLine cord (14 feet, silver) — 2725-07N COL18 nLine cord (25 feet, silver) — 2725-07S COL18 Adjuncts One of the following adjuncts can be used with this voice terminal: nS102A Speakerphone n502A Headset Adapter and a standard headset nS202A Speakerphone Additional Documents The following documents contain additional information relating to the 7305S voice terminal: nSystem 85 7305S Voice Terminal User’s Guide, 555-103-707 nSystem 75 7305S Voice Terminal User’s Guide, 555-200-706 nDEFINITY Generic 1 and Generic 2, System 75, and System 85 Terminals and Adjuncts Installation and Test , 555-015-104
DEFINITY Enterprise Communications Server and System 75 and System 85 Terminals and Adjuncts Reference 555-015-201Issue 11 December 1999 The 7300 Series Voice Terminals 10-12 The 7305S Voice Terminal 10
The 7400 Series Voice Terminals 11-1 11 DEFINITY Enterprise Communications Server and System 75 and System 85 Terminals and Adjuncts Reference 555-015-201Issue 11 December 1999 11 The 7400 Series Voice Terminals The following 7400 Series voice terminals are described in this section: n7401D and 7401 Plus voice terminals n7402 Plus voice terminal n7403D voice terminal n7404D voice terminal n7405D voice terminal n7406D, 7406BIS, and 7406 Plus voice terminals n7407D, Enhanced 7407D, and 7407 Plus voice terminals n7410D and 7410 Plus voice terminals n7434D voice terminal n7444 voice terminal
DEFINITY Enterprise Communications Server and System 75 and System 85 Terminals and Adjuncts Reference 555-015-201Issue 11 December 1999 The 7400 Series Voice Terminals 11-2 The 7401D and 7401 Plus Voice Terminals 11 The 7401D and 7401 Plus Voice Terminals Figure 11-1. The 7401 Plus (7401D02A) Voice Terminal Dial Pad Message Light Feature/Call Feature Button Message 1 23 45 6 78 9ABC DEF MNO JKL GHI PQRS TUV WXYZ *O#Oper 7401 Plus Feature Activity Light Feature Directory Feature Directory F1 F2 F3 F4 F5 F6 F7 F8 F* Speakerphone/ Headset Adapter Jack (on back of voice terminal for 7401 Plus only) RingerVolume Control (on the 7401D, control is on left side; on the 7401 Plus, Handset control is on back of voice terminal)