Home
>
Lucent Technologies
>
Communications System
>
Lucent Technologies DEFINITY Enterprise Communications Server, System 75, System 85 Instructions Manual
Lucent Technologies DEFINITY Enterprise Communications Server, System 75, System 85 Instructions Manual
Have a look at the manual Lucent Technologies DEFINITY Enterprise Communications Server, System 75, System 85 Instructions Manual online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 413 Lucent Technologies manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.
DEFINITY Enterprise Communications Server and System 75 and System 85 Terminals and Adjuncts Reference 555-015-201Issue 11 December 1999 The 7100 Series Voice Terminals 8-25 The 7104A Voice Terminal 8 nSAVE/SEND button — used to save a dialed number, then call it again nPROGRAM button — used in recording numbers for one-touch dialing nDISPLAY button — used to display stored numbers nSPACE, PAUSE, and STOP buttons — used in recording numbers for one-touch dialing Eight dual function buttons These buttons are divided into gray and blue halves and can be programmed for one-touch dialing of sixteen frequently called numbers and/or system features. Loudspeaker The 7104A voice terminal has a built in loudspeaker for group listening and on-hook dialing. The loudspeaker can be turned on and off with theSPEAKER button. Display A 14-Character Liquid Crystal Display (LCD) provides the following displays. Each display is local to the individual terminal. Abbreviated Ring mode in effect Number programmed Date Program mode in effect Delayed Ring mode in effect Shift mode in effect Display mode in effect Speaker on Low Battery Time Number called Pull out tray The 7104A voice terminal is equipped with a pull out tray with an instruction card for voice terminal operation. Other Physical Features Handset The 7104A voice terminal is equipped with an R-type handset. Dial pad The 7104A voice terminal has a 12-button touch-tone dial pad. Jacks The 7104A voice terminal housing contains two jacks. The handset cord jack is just under the left side of the housing. (The handset contains a jack for the other end of the handset cord.) The line jack is on the bottom center of the housing.
DEFINITY Enterprise Communications Server and System 75 and System 85 Terminals and Adjuncts Reference 555-015-201Issue 11 December 1999 The 7100 Series Voice Terminals 8-26 The 7104A Voice Terminal 8 Cords Two cords are supplied with the 7104A voice terminal: a coiled 7-foot modular handset cord and a 7-foot modular line cord. Optional longer cords are available: a 12-foot handset cord, and14-foot and 25-foot line cords. Ringing The 7104A voice terminal has electronic tone personalized ringing. The personalized ringing is controlled by a ring switch under the rear end cap of the voice terminal. The volume control is on the left side of the housing. Mounting Options The 7104A voice terminal comes equipped with a nonadjustable desk stand. Color Options The 7104A voice terminal is available in three colors: black, misty cream, and chocolate brown. Distance Limitations The maximum allowable distances of a 7104A voice terminal from the DEFINITY G1 and G3, DEFINITY ECS, and System 75 cabinet are shown in the table below. Power Requirements The 7104A voice terminal is powered by the tip and ring leads. Battery power is used for some circuits during the on-hook state when loop current is not available. The battery power is provided by four 1.5 volt AA batteries. The batteries are contained in a battery pack that is accessed through the rear end cap. Power Failure Operation The 7104A voice terminal cannot be used as an emergency station during power failure transfer conditions. Table 8-5. Distance Limitations for the 7104A Voice Terminal System Port BoardNominal Maximum Range in Feet (Meters) 24 AWG 26 AWG DEFINITY G1 and G3, DEFINITY ECS, and SYSTEM 75TN742 TN769 TN74615,200 (4,633) 15,200 (4,633) 3,000 (915)10,000 (3,050) 10,000 (3,050) 2,000 (610)
DEFINITY Enterprise Communications Server and System 75 and System 85 Terminals and Adjuncts Reference 555-015-201Issue 11 December 1999 The 7100 Series Voice Terminals 8-27 The 7104A Voice Terminal 8 FCC Registration The 7104A voice terminal is not FCC registered. Hearing Aid Compatible The 7104A voice terminal is compatible with the inductively coupled hearing aids prescribed by the FCC. 7104A Equipment PECs The 7104A voice terminal and optional components were ordered with the following PECs: nBasic 7104A Voice Terminal (black, misty cream, and chocolate brown) — 3150-010 nHandset cord (12 feet, black) — 2725-01L COL09 nLine cord (14 feet, silver) — 2725-07N COL18 nLine cord (25 feet, silver) — 2725-07S COL18 Adjuncts The optional Z34A Message waiting Adjunct can be used with the 7104A voice terminal to provide a visual message waiting indication. Additional Documents The following documents contain additional information relating to the 7104A voice terminal: nDEFINITY Generic 1 and System 75 7104A Voice Terminal User’s Guide, 555-015-720 nDEFINITY Generic 1 and Generic 2, System 75, and System 85 Terminals and Adjuncts Installation and Test , 555-015-104
DEFINITY Enterprise Communications Server and System 75 and System 85 Terminals and Adjuncts Reference 555-015-201Issue 11 December 1999 The 7100 Series Voice Terminals 8-28 The 7104A Voice Terminal 8
The 7200 Series Voice Terminals 9-1 9 DEFINITY Enterprise Communications Server and System 75 and System 85 Terminals and Adjuncts Reference 555-015-201Issue 11 December 1999 9 The 7200 Series Voice Terminals This section describes the following 7200 Series voice terminals: n7203H voice terminal n7205H voice terminal
DEFINITY Enterprise Communications Server and System 75 and System 85 Terminals and Adjuncts Reference 555-015-201Issue 11 December 1999 The 7200 Series Voice Terminals 9-2 The 7203H Voice Terminal 9 The 7203H Voice Terminal Figure 9-1. The 7203H Voice Terminal The 7203H voice terminal is a multi-appearance hybrid voice terminal which provides up to 10 incoming lines. Buttons not used for line appearances may be used for one-touch feature access or for Speed Dialing. It requires three pair wiring for operation. One wire pair is used for analog voice, while the other two pairs are used for digital control and signaling. NOTE: The 7203H voice terminal was discontinued in March 1988. Message 1 23 456 78 9ABC DEF MNO JKL GHI PRS TUV WXY *O#OPER Dial Pad Call Appearance/ Transfer Button Hold Button Drop Button Message Conference DropTra n s f e r Hold Recall Disconnect Feature Buttons LightRecall ButtonDisconnect Button Conference Button Vo l u m eControl (on left side) Handset
DEFINITY Enterprise Communications Server and System 75 and System 85 Terminals and Adjuncts Reference 555-015-201Issue 11 December 1999 The 7200 Series Voice Terminals 9-3 The 7203H Voice Terminal 9 Applications The7203HvoiceterminalcanbeusedwithSystem85andtheDEFINITY Communications System Generic 2. However, on a DEFINITY G2, this voice terminal can only be used on a traditional module and the SN224 circuit pack. The 7203H voice terminal is suitable for managers, executive secretaries, office suppor t personnel, and others who do not need data capabilities. Physical Description Dimensions NOTE: The following dimensions are approximate. Width = 7 inches Depth (front to back) = 8-3/4 inches Height (maximum with handset in place) = 5-1/2 inches Thickness of housing = 1-1/2 inches Features Six Fixed Feature Buttons nRECALL button nDISCONNECT button nCONFERENCE button nDROP button nTRANSFER button nHOLD button Message Light The green Message light goes on when a message is left for the user. It goes off when the user retrieves the message. Call Appearance/Feature Buttons The 7203H voice terminal has 10 call appearance/feature buttons. Adjacent to each button is a pair of red and green status indicator lights.
DEFINITY Enterprise Communications Server and System 75 and System 85 Terminals and Adjuncts Reference 555-015-201Issue 11 December 1999 The 7200 Series Voice Terminals 9-4 The 7203H Voice Terminal 9 Other Physical Features Handset The 7203H voice terminal is equipped with an R-type handset. Dial pad The 7203H voice terminal has a 12-button touch-tone dial pad. Jacks The 7203H voice terminal housing contains three jacks. The handset cord jack is just under the left side of the housing. (The handset contains a jack for the other end of the handset cord.) The line jack is on the bottom center of the housing. The modular speakerphone/handset jack is located on the bottom if the set. Cords Two cords are supplied with the 7203H voice terminal: a coiled 7-foot modular handset cord and a 7-foot modular line cord. Optional longer cords are available: a 12-foot handset cord, and 14-foot and 25-foot line cords. Ringing The 7203H voice terminal has electronic tone ringing. The volume control is on the left side of the housing. Mounting Options The 7203H voice terminal comes equipped with a nonadjustable desk stand. An optional wall mounting kit can be ordered. Color Options The 7203H voice terminal was available in various colors; however, maintenance replacements are available in black only.
DEFINITY Enterprise Communications Server and System 75 and System 85 Terminals and Adjuncts Reference 555-015-201Issue 11 December 1999 The 7200 Series Voice Terminals 9-5 The 7203H Voice Terminal 9 Distance Limitations The maximum allowable distances of a 7203H voice terminal from the DEFINITY G2 and System 85 cabinet are shown in the following table. Power Requirements The 7203H voice terminal is powered by the tip and ring leads. If the 7203H is equipped with any adjunct, auxiliary power will be required for the adjunct. Refer to theAdjunct Powersection earlier in this manual. Power Failure Operation The 7203H voice terminal cannot be used as an emergency station during power failure transfer conditions. FCC Registration The 7203H voice terminal is not FCC registered. Hearing Aid Compatible The 7203H voice terminal is compatible with the inductively coupled hearing aids prescribed by the FCC. 7203H Equipment PECs The 7203H voice terminal and optional components were ordered with the following PECs: nBasic 7203H Voice Terminal — 3182-16H/CLR nHandset cord (12 feet) — 2725-01L COL09 nLine cord (14 feet, silver) — 2725-07N COL18 nLine cord (25 feet, silver) — 2725-07S COL18 Table 9-1. Distance Limitations for the 7203H Voice Terminal System Port BoardNominal Maximum Range in Feet (Meters) 24 AWG 26 AWG DEFINITY G2 and System 85SN224 3,000 (914) 2,300 (700)
DEFINITY Enterprise Communications Server and System 75 and System 85 Terminals and Adjuncts Reference 555-015-201Issue 11 December 1999 The 7200 Series Voice Terminals 9-6 The 7203H Voice Terminal 9 Adjuncts One of the following adjuncts can be used with this voice terminal: nS101A Speakerphone nS201A Speakerphone n500A Headset Adapter and a standard headset Additional Documents The following documents contain additional information relating to the 7203H voice terminal: nSystem 85 7203H Voice Terminal User’s Guide, 555-102-709 nDEFINITY Generic 1 and Generic 2, System 75, and System 85 Terminals and Adjuncts Installation and Test , 555-015-104