Lexmark X9350 User Manual

							Use thisToActive NetworkSet the named network to a value of Auto, Ethernet
10/100, or Wireless 802.11b/g.
Press 
 to save and exit.
If the printer detects an active Ethernet connection when
it is turning on, Ethernet is set as the default; otherwise,
wireless is set as the default.
Wireless Setup Menu
Use thisToPrint Wireless Setup PagePrint the Wireless Network Setup page. Press  to print
it.Network NameView the current Service Set Identifier (SSID) being used.
An SSID is the name of a wireless local area network.
You cannot change this menu item.Wireless Signal QualitySelect a Wireless Signal Strength. Values are:
• Gradient—with values of 0–100, but you cannot
change this value.
• Named—
– 0 is Unacceptable
– 1 is Poor
– 2 is Fair
– 3 is Good
– 4 is Excellent
Note:  The Named value shown is based on current
signal strength valued returned from the internal print
server. You cannot change the value.
TCP/IP Menu
Internet Protocol (IP) specifies the format of packets, also called  datagrams, and the addressing scheme. Most networks
combine IP with a higher-level protocol called  Transmission Control Protocol (TCP). TCP enables two hosts to establish
a connection and exchange streams of data. TCP guarantees delivery of data and also guarantees that packets are
delivered in the same order in which they were sent.
Use thisToEnable DHCPSpecify Yes or No as the value. DHCP is  Dynamic Host
Configuration Protocol . The network automatically
assigns a number for the network information.
Press 
 to save and exit.
Set IP AddressAccess the Set IP Address Menu.
Note:  This menu item is unavailable if DHCP is set to
Enabled.
1 Press 
 to view it.
2 Use the keypad to specify the current IP address.
3 Press 
 to save and exit.
 61
Downloaded From ManualsPrinter.com Manuals      
						

							Use thisToSet IP NetmaskAccess the Set IP Netmask Menu.
Note:  This menu item is unavailable if DHCP is set to
Enabled.
1 Press 
 to view it.
2 Use the keypad to specify the current IP Netmask.
3 Press 
 to save and exit.
Set IP GatewayAccess the Set IP Gateway Menu.
Note:  This menu item is unavailable if DHCP is set to
Enabled.
1 Press 
 to view it.
2 Use the keypad to specify the current IP Gateway.
3 Press 
 to save and exit.
Using the Maintenance menu
The  Maintenance  menu lets you check ink levels and handle various tasks related to print cartridges.
1 From the control panel, press 
 or  repeatedly until  Maintenance is highlighted.
2 Press 
.
The  Maintenance  menu appears.
The following table explains the function of each menu item in the  Maintenance menu.
Use thisToView Ink LevelsSee the current ink levels for both print cartridges.
a Press 
 to start this task.
The Ink Levels screen appears to show you the ink levels of both
cartridges.
b Press 
 to return to the  Maintenance menu.
Clean CartridgesClean the print cartridge nozzles of both cartridges.
a Press 
 to start this task.
The Clean Cartridges screen appears, and a cleaning page prints.
• Wait for the page to print.
-or-
• Press 
 to stop the cleaning process.
b Discard the sheet.
Align CartridgesAlign both cartridges to improve print quality.
a Press 
 to start this task.
The Align Cartridges screen appears and an Alignment Page prints.
b Discard the sheet. 62
Downloaded From ManualsPrinter.com Manuals             
						

							Use thisToChange Print CartridgesSee a short video on the display with instructions on how to change print
cartridges.
a Press 
 to start this task.
The Cartridge Installation screen appears and the video begins.
b Change the cartridges. For more information, see “Installing print
cartridges” on page 142.
c Press 
 to stop the video at any time.
Print Test PagePrint a Test Page to see if the printer is functioning properly. The Test Page
lists some information about the printer.
a Press 
 to start this task.
The Test Page screen appears.
• Wait for the Test Page to print.
-or-
• Press 
 to stop printing.
b Use the Test Page to reference the information and then discard the
sheet.
Reset DefaultsReset all of your previously defined user default settings to the factory
default settings.
a Press 
 to start this task.
The Reset Menu Defaults screen appears.
b Press 
 or  to choose either Yes or No.
c Press 
.
Note:  Items such as phone lists, time, date, and country code are not reset.
All other user default settings are reset.
 63
Downloaded From ManualsPrinter.com Manuals         
						

							Learning about the software
Using the printer software
Use thisToThe Productivity SuiteOpen the component necessary for you to complete a
task.The All-In-One CenterPreview, scan, copy, print, and fax images.The Solution CenterFind troubleshooting, maintenance, and cartridge ordering
information.Printing PreferencesSelect the best print settings for the document you are
printing.The Photo EditorEdit photos and graphics.The ToolbarCreate printer-friendly versions of an active Web page.Fast PicsTransfer digital photos from a memory card, a flash drive,
or a PictBridge-enabled digital camera to the computer.
You can also print photos using the computer.The Fax Solutions SoftwareAdjust fax settings.
Using the Productivity Suite
To open the Productivity Suite software, use one of these methods:
Method 1Method 2From the desktop, double-click the  Productivity Suite
icon.1 Click  Start ª  Programs  or All Programs  ª  Lexmark
9300 Series .
2 Select  Productivity Suite .
Click the Productivity Suite icon for the task you want to complete.
ClickToDetailsManage DocumentsOrganize, search for, or print documents. Send documents to other
people, or open them with various programs.Manage PhotosOrganize or print photos in various layouts. Send photos to other people,
or open them with various programs.Visit Lexmark OnlineVisit our Web site.
 64
Downloaded From ManualsPrinter.com Manuals    
						

							ClickToDetailsScanScan a photo or document.CopyCopy a photo or document with options to enlarge, reduce, or change
other features.FaxSend a fax or change fax settings.Attach to E-mailE-mail documents or photos which are scanned or saved on the
computer.Scan & Edit Text (OCR)Scan a document to a word processor to edit the text using Optical
Character Recognition (OCR).Scan to PDFScan a document and save it on your computer as a PDF.Learn more about what you can do with this software.Find maintenance and troubleshooting information and tools to keep the printer working properly.View a Web-based tutorial.
Using the All-In-One Center
Opening the All-In-One Center
Use the All-In-One Center software to scan, copy, and fax documents, or to print saved photos.
To open the All-In-One Center, use one of these methods:
Method 1Method 2From the desktop, double-click the  Productivity Suite
icon, and then click  Scan or Copy .1Click  Start ª  Programs  or All Programs  ª  Lexmark
9300 Series .
2 Select  All-In-One Center .
 65
Downloaded From ManualsPrinter.com Manuals          
						

							Using the Scanning & Copying tab
Use the Scanning & Copying tab to perform scanning and copying tasks, to select a task from the Productivity Tools
section, or to preview an image.From this sectionYou canScan• Select a program to send a scanned image to.
• Select what type of image is being scanned.
• Select the scan quality.
Note:  Click See More Scan Settings  to view all settings.Copy•Select the quantity and color of copies.
• Select a quality setting for copies.
• Select a blank paper size.
• Select the size of the original document.
• Lighten or darken copies.
• Enlarge or reduce copies.
Note:  Click See More Copy Settings  to view all settings.Productivity Tools•Print
– Repeat an image several times on one page.
– Enlarge or reduce an image.
– Print an image as a multiple-page poster.
– Print more than one page on a sheet of paper.
• Share
– Fax an image or document.
– E-mail an image or document.
• Save
– Save an image on the computer.
– Save multiple photos.
– Scan and save to PDF format.
• Edit
– Edit text found in a scanned document (OCR).
– Modify an image with a photo editor.Preview Now•Show or create folders.
• Preview and select images.
• Rename, delete, or edit selected images.
Note:  For more information about using the Scanning & Copying tab, click  Help in the top center of the screen.
 66
Downloaded From ManualsPrinter.com Manuals 
						

							Using the Saved Images tab
Use the Saved Images tab to perform tasks with images that are saved on the computer.From this sectionYou canOpen WithSelect where to send the saved images.Photo PrintsClick  Show More Printing Options  to view and adjust the print settings. You can:
• Select the quantity and color of copies.
• Select a quality setting for copies.
• Lighten or darken copies.
• Enlarge or reduce copies.
Note:  Click Display Advanced Copy Settings  to select and print photos in
standard sizes.Productivity Tools• Print
– Print an album page with various photo sizes.
– Enlarge or reduce an image.
– Print an image as a multiple-page poster.
• Share
– Fax an image or document.
– E-mail an image or document.
• Edit
– Edit text found in a scanned document (OCR).
– Modify an image with a photo editor.
Note:  For more information about using the Saved Images tab, click  Help in the top center of the screen.
Using the Maintain/Troubleshoot link
The Maintain/Troubleshoot link provides you with direct links to the Solution Center and the Fax Setup Utility.
1 Click  Start ª  Programs  or All Programs  ª  Lexmark 9300 Series .
2 Select  All-In-One Center .
3 Click  Maintain/Troubleshoot .
4 Select from these topics:
• Maintain or fix quality problems
• Troubleshoot problems
• Device status and ink levels
• More printing ideas and how to's
• Contact information
• Advanced
• View the software version and copyright information
• Display the Fax Printer Setup Utility
Using the Solution Center
The Solution Center provides help, as well as information about the printer status and ink level.
 67
Downloaded From ManualsPrinter.com Manuals 
						

							To open the Solution Center, use one of these methods:Method 1Method 2From the desktop, double-click the Productivity Suite
icon, and then click the  Maintain/Troubleshoot  button.1Click  Start ª  Programs  or All Programs  ª  Lexmark
9300 Series .
2 Select  Solution Center .
The Solution Center consists of six tabs:
From hereYou canPrinter Status (Main dialog)•View the status of the printer. For example, while printing, the status
of the printer is  Busy Printing .
• View ink levels and order new print cartridges.How To•Learn how to:
– Use basic features.
– Print, scan, copy, and fax.
– Print projects such as photos, envelopes, cards, banners, iron-
on transfers, and transparencies.
• Find the electronic  User's Guide for more information.
• View ink levels and order new print cartridges.Troubleshooting•Learn tips about the current status.
• Solve printer problems.
• View ink levels and order new print cartridges.Maintenance•Install a new print cartridge.
Note:  Wait until scanning is complete before installing a new print
cartridge.
• View shopping options for new cartridges.
• Print a test page.
• Clean to fix horizontal streaks.
• Align to fix blurry edges.
• Troubleshoot other ink problems.
• View ink levels and order new print cartridges.Contact Information•Learn how to contact us by telephone or on the World Wide Web.
• View ink levels and order new print cartridges.Advanced•Change the appearance of the Printing Status window.
• Turn printing voice notification on or off.
• Change network printing settings.
• Share information with us regarding how you use the printer.
• Obtain software version information.
• View ink levels and order new print cartridges.
Note:  For more information, click  Help in the lower right corner of the screen.
 68
Downloaded From ManualsPrinter.com Manuals      
						

							Using Printing Preferences
Opening Printing Preferences
Printing Preferences is the software that controls the printing function when the printer is connected to a computer. You
can change the settings in Printing Preferences based on the type of project you want to create. You can open Printing
Preferences from almost any program:
1 With a document open, click  File ª Print .
2 From the Print dialog, click  Properties, Preferences, Options,  or Setup .
Using the Printing Preferences tabs
All of the print settings are on the two main tabs of the Printing Preferences software: Print Setup and Advanced.
TabChoicesPrint Setup• Select a Quality/Speed setting of Automatic, Quick,
Normal, or Best.
• Select the Paper Options for paper size, paper type,
and paper source.
• Select portrait or landscape orientation.
• Select to print in black and white instead of color.
• Select to print a borderless copy.
• Specify the number of copies to print.
• Select to collate the job.
• Specify to print the last page of the job first.Advanced•Specify to print on both sides of a sheet of paper
(two-sided printing called  duplexing).
• Select a duplexing preference on how the sheets are
flipped.
• Select Automatic Image Sharpening.
• Select a Layout of Normal, Banner, Mirror, N-up,
Poster, Booklet, or Borderless.
 69
Downloaded From ManualsPrinter.com Manuals  
						

							Using the Photo Editor
Use the Photo Editor software to edit graphics or photos.
1 Click  Start ª  Programs  or All Programs  ª  Lexmark 9300 Series .
2 Select  Photo Editor .
3 Click  File ª Open .
4 Select the image you want to edit.
5 Click  Open .
6 Edit the image with the available tools.
Notes:
• You can edit only one image at a time.
• Move the mouse pointer over the tool for a description.
• To undo or redo changes, click the corresponding arrow next to Undo in the top center of the screen. You can
reverse multiple changes.
7 Click  File ª Save as .
8 Enter a file name and file type, and then click  Save.From hereYou canQuick Fixes•Reduce the red-eye effect caused by light reflection.
• Fix the photo with one click.
• Colorize the image using antiquing or sepia tones.
• Crop the image.
• Rotate the image.
• Flip the image.Image Adjust•Adjust the color depth.
• Adjust the color balance.
• Colorize the image.
• Adjust the Brightness/Contrast.
• Adjust the blur.
• Adjust the sharpness.
• Despeckle (blur) the image to remove dust and scratches.
• Adjust the exposure.
• Enhance the color level.Image Size•Change the units of measurement.
• Resize the image.
• Crop the image.
 70
Downloaded From ManualsPrinter.com Manuals