Lexmark X 950 User Manual
Have a look at the manual Lexmark X 950 User Manual online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 166 Lexmark manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.
Menu item Description Collate On (1,2,1,2,1,2) Off ( 1 ,1 ,1 , 2 , 2 , 2 )Stacks the pages of a print job in sequence when printing multiple copies Notes: On is the factory default setting. On stacks the print job in sequence. Separator Sheets Off Between Copies Between Jobs Between PagesSpecifies whether blank separator sheets are inserted Notes: Off is the factory default setting. Between Copies inserts a blank sheet between each copy of a print job if Collate is set to On. If Collate is set to Off, then a blank page is inserted between each set of printed pages, such as after all page 1's and after all page 2's. Between Jobs inserts a blank sheet between print jobs. Between Pages inserts a blank sheet between each page of a print job. This setting is useful when printing transparencies or when inserting blank pages in a document. Separator Source Tr a y [ x ] Manual FeederSpecifies the paper source for separator sheets Notes: Tray 1 (standard tray) is the factory default setting. From the Paper menu, Configure MP must be set to Cassette for Manual Feeder to appear as a menu setting. Paper Saver Off 2‑Up 3‑Up 4‑Up 6‑Up 9‑Up 12‑Up 16‑UpSpecifies that multiple‑page images be printed on one side of a paper Notes: Off is the factory default setting. The number selected is the number of page images that will print per side. Paper Saver Ordering Horizontal Reverse Horizontal Reverse Vertical Ve r t i c a lSpecifies the positioning of multiple‑page images when using Paper Saver Notes: Horizontal is the factory default setting. Positioning depends on the number of page images and whether they are in portrait or landscape orientation. Paper Saver Orientation Auto Landscape PortraitSpecifies the orientation of a multiple‑page document Note: Auto is the factory default setting. The printer chooses between portrait and landscape. Paper Saver Border None SolidPrints a border on each page image Note: None is the factory default setting. Understanding the printer menus 211
Menu item Description Staple Job Off Auto Back Dual Dual Double FrontSpecifies whether the prints are stapled Notes: Off is the factory default setting. This menu appears only when a stapler is installed. Hole Punch Off OnSpecifies whether the prints have punched holes Note: This menu appears only when a puncher is installed. Hole Punch Mode 2 holes 3 holes 4 holesDetermines the type of punch finishing performed on a printed output Notes: “2 holes” is the factory default setting regardless of hardware. “3 holes” and “4 holes” appear only when their respective hole punch hardware is installed. Offset Pages None Between Copies Between JobsOffsets pages at certain instances Notes: None is the factory default setting. Between Copies offsets each copy of a print job if Collate is set to On. If Collate is set to Off, each set of printed pages are offset, such as all page 1's and all page 2's. Between Jobs sets the same offset position for the entire print job regardless of the number of copies printed. This menu appears only when a stapler is installed. Quality menu Use To Print Mode Color Black OnlySpecify whether to print images in color. Note: Color is the factory default setting. Color Correction Auto Off ManualAdjust the color output on the printed page. Note: Auto is the factory default setting. Print Resolution 1200 dpi 2400 Image QSpecify the output resolution in dots per inch (dpi) or in image quality. Note: 2400 Image Q is the factory default setting. Toner Darkness 1–5Lighten or darken the output. Note: 3 is the factory default setting. Understanding the printer menus 212
Use To Enhance Fine Lines On OffEnable a print mode preferable for files such as architectural drawings, maps, electrical circuit diagrams, and flow charts. Note: Off is the factory default setting. Color Saver On OffReduce the amount of toner used for graphics and images. Notes: Off is the factory default setting. On overrides the Toner Darkness setting. RGB Brightness ‑6 to 6Adjust the brightness of the output. Note: 0 is the factory default setting. RGB Contrast 0–5Adjust the contrast of the output. Note: 0 is the factory default setting. RGB Saturation 0–5Adjust saturation in color outputs. Note: 0 is the factory default setting. Color Balance Cyan ‑5 to 5 Magenta ‑5 to 5 Ye l l o w ‑5 to 5 Black ‑5 to 5 Reset DefaultsEnable an equal balance of colors in the output. Note: 0 is the factory default setting. Color Samples sRGB Display sRGB Vivid Display—True Black Vivid Off—RGB US CMYK Euro CMYK Vivid CMYK Off—CMYKPrint sample pages for each of the RGB and CMYK color conversion tables used in the printer. Understanding the printer menus 213
Use To Manual Color RGB Image RGB Text RGB GraphicsCustomize the RGB color conversions. Select from the following options: Vivid sRGB Display Display—True Black sRGB Vivid Off Notes: sRGB Display is the factory default setting for RGB Image. sRGB Vivid is the factory default setting for RGB Text and RGB Graphics. Manual Color (continued) CMYK Image CMYK Text CMYK GraphicsCustomize the CMYK color conversions. Select from the following options: US CMYK Euro CMYK Vivid CMYK Off Note: US CMYK is the U.S. factory default setting. Euro CMYK is the international factory default setting. Spot Color ReplacementAssign specific CMYK values to named spot colors. Note: This menu is available only on the Embedded Web Server. RGB ReplacementMatch the colors of the output with that of the original document. Note: This menu is available only on the Embedded Web Server. Utilities menu Menu item Description Remove Held Jobs Confidential Held Not Restored AllRemoves confidential and held jobs from the printer hard disk Notes: Selecting a setting affects only print jobs that are resident in the printer. Bookmarks, print jobs on flash drives, and other types of held jobs are not affected. Not Restored removes all Print and Hold jobs that are not restored from the printer hard disk or memory. Understanding the printer menus 214
Menu item Description Format Flash Ye s NoFormats the flash memory Warning—Potential Damage: Do not turn off the printer while the flash memory is being formatted. Notes: Yes deletes all data stored in flash memory. No cancels the format request. Flash memory refers to the memory added by installing a flash memory option card in the printer. A flash memory option card must be installed in the printer and operating properly for this menu item to be available. The flash memory option card must not be read/write‑ or write‑protected. Delete Downloads on Disk Delete Now Do Not DeleteRemoves downloads from the printer hard disk, including all held jobs, buffered jobs, and parked jobs Notes: Delete Now configures the printer control panel to return to the originating screen after the deletion process is completed. Do Not Delete sets the printer control panel to return to the main Utilities menu. Activate Hex TraceAssists in isolating the source of a print job problem Notes: When activated, all data sent to the printer is printed in hexadecimal and character representation, and control codes are not executed. To exit or deactivate Hex Trace, turn the printer off or reset the printer. Coverage Estimator Off OnProvides an estimate of the percentage coverage of toner on a page. The estimate is printed on a separate page at the end of each print job. Note: Off is the factory default setting. XPS menu Menu item Description Print Error Pages Off OnPrints a page containing information on errors, including XML markup errors Note: Off is the factory default setting. PDF menu Menu item Description Scale to Fit No Ye sScales page content to fit the selected paper size Note: No is the factory default setting. Understanding the printer menus 215
Menu item Description Annotations Do Not Print PrintPrints annotations in a PDF Note: Do Not Print is the factory default setting. PostScript menu Menu item Description Print PS Error Off OnPrints a page containing the PostScript error Note: Off is the factory default setting. Lock PS Startup Mode Off OnEnables users to disable the SysStart file Note: Off is the factory default setting. Font Priority Resident Flash/DiskEstablishes the font search order Notes: Resident is the factory default setting. This menu item is available only if a formatted flash memory option card or printer hard disk is installed and operating properly. Make sure the flash memory option or printer hard disk is not read/write‑, write‑, or password‑protected. Job Buffer Size must not be set to 100%. Image Smoothing Off OnEnhances the contrast and sharpness of low‑resolution images and smooths their color transitions Notes: Off is the factory default setting. Image Smoothing has no effect on images that are 300 dpi or higher in resolution. PCL Emul menu Menu item Description Font Source Resident Disk Download Flash AllSpecifies the set of fonts used by the Font Name menu item Notes: Resident is the factory default setting. It shows the factory default set of fonts downloaded in RAM. Flash and Disk settings show all fonts resident in that option. Make sure the flash option is properly formatted and is not read/write‑, or password‑protected. Download shows all the fonts downloaded in RAM. All shows all fonts available to any option. Understanding the printer menus 216
Menu item Description Font Name RO CourierIdentifies a specific font and where it is stored Note: RO Courier is the factory default setting. The RO Courier format shows the font name, font ID, and storage location in the printer. The font source abbreviation is R for Resident, F for Flash, K for Disk, and D for Download. Symbol Set 10U PC‑8 12U PC‑850Specifies the symbol set for each font name Notes: 10U PC‑8 is the US factory default setting. 12U PC‑850 is the international factory default setting. A symbol set is a set of alphabetical and numeric characters, punctuation, and special symbols. Symbol sets support the different languages or specific programs such as math symbols for scientific text. Only the supported symbol sets are shown. PCL Emulation Settings Point Size 1.00–1008.00Changes the point size for scalable typographic fonts Notes: 12 is the factory default setting. Point Size refers to the height of the characters in the font. One point equals approximately 1/72 of an inch. Point sizes can be increased or decreased in 0.25‑point increments. PCL Emulation Settings Pitch 0.08–100Specifies the font pitch for scalable monospaced fonts Notes: 10 is the factory default setting. Pitch refers to the number of fixed‑space characters per inch (cpi). Pitch can be increased or decreased in 0.01‑cpi increments. For non‑scalable monospaced fonts, the pitch appears on the display but cannot be changed. PCL Emulation Settings Orientation Portrait LandscapeSpecifies the orientation of text and graphics on a page Notes: Portrait is the factory default setting. Portrait prints text and graphics parallel to the short edge of the page. Landscape prints text and graphics parallel to the long edge of the page. PCL Emulation Settings Lines per Page 1–255Specifies the number of lines that print on each page Notes: 60 is the US factory default setting. 64 is the international default setting. The printer sets the amount of space between each line based on the Lines per Page, Paper Size, and Orientation settings. Select the desired Paper Size and Orientation before setting Lines per Page. Understanding the printer menus 217
Menu item Description PCL Emulation Settings A4 Width 198 mm 203 mmSets the printer to print on A4‑size paper Notes: 198 mm is the factory default setting. The 203‑mm setting sets the width of the page to allow the printing of eighty 10‑pitch characters. PCL Emulation Settings Auto CR after LF Off OnSpecifies whether the printer automatically performs a carriage return (CR) after a line feed (LF) control command Note: Off is the factory default setting. PCL Emulation Settings Auto LF after CR Off OnSpecifies whether the printer automatically performs a line feed (LF) after a carriage return (CR) control command Note: Off is the factory default setting. Tr a y Re n u m b e r Assign MP Feeder Off None 0–199 Assign Tray [x] Off None 0–199 Assign Manual Paper Off None 0–199 Assign Manual Env Off None 0–199Configures the printer to work with printer software or programs that use different source assignments for trays, drawers, and feeders Notes: Off is the factory default setting. None ignores the Select Paper Feed command. This selection is displayed only when it is selected by the PCL 5e interpreter. 0–199 allows a custom setting to be assigned. Tr a y Re n u m b e r View Factory Defaults MPF Default = 8 T1 Default = 1 T2 Default = 4 T3 Default = 5 T4 Default = 20 T5 Default = 21 Env Default = 6 MPaper Default = 2 MEnv Default = 3Displays the factory default setting assigned to each tray, drawer, or feeder Understanding the printer menus 218
Menu item Description Tr a y Re n u m b e r Restore Defaults Ye s NoReturns all tray, drawer, and feeder assignments to the factory default settings HTML menu Menu Item Description Font Name Albertus MT Antique Olive Apple Chancery Arial MT Avant Garde Bodoni Bookman Chicago Clarendon Cooper Black Copperplate Coronet Courier Eurostile Garamond Geneva Gill Sans Goudy Helvetica Hoefler Text Intl CG Times Intl Courier Intl UniversJoanna MT Letter Gothic Lubalin Graph Marigold MonaLisa Recut Monaco New CenturySbk New York Optima Oxford Palatino StempelGaramond Taffy Times TimesNewRoman Univers Zapf Chancery NewSansMTCS NewSansMTCT New SansMTJA NewSansMTKOSets the default font for HTML documents Note: The Times font is used in HTML documents that do not specify a font. Menu item Description Font Size 1–255 ptSets the default font size for HTML documents Notes: 12 pt is the factory default setting. Font size can be increased in 1‑point increments. Understanding the printer menus 219
Menu item Description Scale 1–400%Scales the default font for HTML documents Notes: 100% is the factory default setting. Scaling can be increased in 1% increments. Orientation Portrait LandscapeSets the page orientation for HTML documents Note: Portrait is the factory default setting. Margin Size 8–255 mmSets the page margin for HTML documents Notes: 19 mm is the factory default setting. Margin size can be increased in 1‑mm increments. Backgrounds Print Do Not PrintSpecifies whether to print backgrounds on HTML documents Note: Print is the factory default setting. Image menu Menu item Description Auto Fit On OffSelects the optimal paper size, scaling, and orientation Note: On is the factory default setting. It overrides scaling and orientation settings for some images. Invert Off OnInverts bi‑tonal monochrome images Notes: Off is the factory default setting. This setting does not apply to GIF or JPEG images. Scaling Best Fit Anchor Center Fit Height/Width Fit Height Fit Width Anchor Top LeftScales the image to fit the selected paper size Notes: Best Fit is the factory default setting. When Auto Fit is set to On, Scaling is automatically set to Best Fit. Orientation Portrait Landscape Rev Portrait Rev LandscapeSets the image orientation Note: Portrait is the factory default setting. Understanding the printer menus 220