Fujitsu Fi6130 Operators Manual
Have a look at the manual Fujitsu Fi6130 Operators Manual online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 86 Fujitsu manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.
![Page 76
[Add a Document Open Password to created PDF files] Checkbox
You can set a Document Open password to PDF files. Up to 16 characters\
(single-width) can be used for a
password. This checkbox is available only for Adobe PDF files. (For PDF\
/A files, passwords cannot be set.)
If this checkbox is marked, the [Password] dialog box appears immediatel\
y after scanning.
Password-protected PDF files cannot be opened with ScandAll PRO. Open pa\
ssword-protected PDF files with
Adobe Acrobat....](http://img.usermanuals.tech/thumb/26/59946/w64_fujitsu-fi6130-operators-manual-1488462901_d-75.png "Page 76
[Add a Document Open Password to created PDF files] Checkbox
You can set a Document Open password to PDF files. Up to 16 characters\
(single-width) can be used for a
password. This checkbox is available only for Adobe PDF files. (For PDF\
/A files, passwords cannot be set.)
If this checkbox is marked, the [Password] dialog box appears immediatel\
y after scanning.
Password-protected PDF files cannot be opened with ScandAll PRO. Open pa\
ssword-protected PDF files with
Adobe Acrobat....")
![Page 77
The [Acrobat Scan] dialog box appears.
4. Select [FUJITSU fi-6130dj] or [FUJITSU fi-6230dj] from the [Scanner] dro\
p-down list, and then click the [Scan] button.](http://img.usermanuals.tech/thumb/26/59946/w64_fujitsu-fi6130-operators-manual-1488462901_d-76.png "Page 77
The [Acrobat Scan] dialog box appears.
4. Select [FUJITSU fi-6130dj] or [FUJITSU fi-6230dj] from the [Scanner] dro\
p-down list, and then click the [Scan] button.")
![Page 78
ATTENTION
If scanned by using the default settings, images outputted may not be sa\
tisfactory. It is
recommended the settings be changed, following the procedure below:
1. Clear the [Recognize Text Using OCR] checkbox.
2. Click the [Image Settings] button. The [Image Settings] dialog box appears.
3. Change settings as follows:
- Color/Grayscale:
- Monochrome:
- Background removal:
- Edge shadow removal: none
JBIG2 or CCITT Group 4
Off
Off
The [TWAIN Driver] dialog box appears.
5....](http://img.usermanuals.tech/thumb/26/59946/w64_fujitsu-fi6130-operators-manual-1488462901_d-77.png "Page 78
ATTENTION
If scanned by using the default settings, images outputted may not be sa\
tisfactory. It is
recommended the settings be changed, following the procedure below:
1. Clear the [Recognize Text Using OCR] checkbox.
2. Click the [Image Settings] button. The [Image Settings] dialog box appears.
3. Change settings as follows:
- Color/Grayscale:
- Monochrome:
- Background removal:
- Edge shadow removal: none
JBIG2 or CCITT Group 4
Off
Off
The [TWAIN Driver] dialog box appears.
5....")
![Page 79
7. From the [File] menu, select [Save As] or [Save] to save the scanned ima\
ges.
For details on the operation of Adobe Acrobat, refer to Adobe Acrobat He\
lp.
HINT
If you save scanned document images as described above, the file size ma\
y increase greatly. To reduce the
file size, save images following the procedure below. (It may take more\
time than you save as described
above.)
1. Select [File] Õ [Print].
2. In the dialog box below, select [Adobe PDF] from the [Name] drop-down...](http://img.usermanuals.tech/thumb/26/59946/w64_fujitsu-fi6130-operators-manual-1488462901_d-78.png "Page 79
7. From the [File] menu, select [Save As] or [Save] to save the scanned ima\
ges.
For details on the operation of Adobe Acrobat, refer to Adobe Acrobat He\
lp.
HINT
If you save scanned document images as described above, the file size ma\
y increase greatly. To reduce the
file size, save images following the procedure below. (It may take more\
time than you save as described
above.)
1. Select [File] Õ [Print].
2. In the dialog box below, select [Adobe PDF] from the [Name] drop-down...")
![Page 80
3. Click the [Properties] button.
4. Select the [Adobe PDF Settings] tab.
5. Select a desired setting from the [Default Settings] drop-down list.
The following shows an example when [Smallest File Size] is selected.](http://img.usermanuals.tech/thumb/26/59946/w64_fujitsu-fi6130-operators-manual-1488462901_d-79.png "Page 80
3. Click the [Properties] button.
4. Select the [Adobe PDF Settings] tab.
5. Select a desired setting from the [Default Settings] drop-down list.
The following shows an example when [Smallest File Size] is selected.")
![Page 81
6. Click the [OK] button.
7. Click the [OK] button in the [Print] dialog box.
8. Enter a file name, and then click the [Save] button in the [Save PDF Fil\
e As] dialog box.
All Rights Reserved. Copyright 2007 © PFU LIMITED](http://img.usermanuals.tech/thumb/26/59946/w64_fujitsu-fi6130-operators-manual-1488462901_d-80.png "Page 81
6. Click the [OK] button.
7. Click the [OK] button in the [Print] dialog box.
8. Enter a file name, and then click the [Save] button in the [Save PDF Fil\
e As] dialog box.
All Rights Reserved. Copyright 2007 © PFU LIMITED")
![Page 82
fi-6130 / fi-6230 Image Scanner Operators Guide
TROUBLESHOOTING
CONTENTS MAP
TOP
3.7 Excluding a Color from Images (Dropout Color)
You can select a color from primary colors (red, green, and blue) to r\
emove (drop out) from a scanned document image.
(Note the dropout color can be specified only in binary (black & white\
) mode.) For example, when you scan a document
containing black text with green background, you can output an image of \
only black text.
Enable the dropout...](http://img.usermanuals.tech/thumb/26/59946/w64_fujitsu-fi6130-operators-manual-1488462901_d-81.png "Page 82
fi-6130 / fi-6230 Image Scanner Operators Guide
TROUBLESHOOTING
CONTENTS MAP
TOP
3.7 Excluding a Color from Images (Dropout Color)
You can select a color from primary colors (red, green, and blue) to r\
emove (drop out) from a scanned document image.
(Note the dropout color can be specified only in binary (black & white\
) mode.) For example, when you scan a document
containing black text with green background, you can output an image of \
only black text.
Enable the dropout...")
![Page 83
The [Advance] dialog box appears.
5. Select a color you want to remove, from the [Dropout Color] drop-down li\
st under [More].
For example, when you want to obtain only black text image from a docume\
nt containing black text outlined in green,
select [Green] from the list.
If you want no color to be dropped out, select [None].](http://img.usermanuals.tech/thumb/26/59946/w64_fujitsu-fi6130-operators-manual-1488462901_d-82.png "Page 83
The [Advance] dialog box appears.
5. Select a color you want to remove, from the [Dropout Color] drop-down li\
st under [More].
For example, when you want to obtain only black text image from a docume\
nt containing black text outlined in green,
select [Green] from the list.
If you want no color to be dropped out, select [None].")
![Page 84
6. Click the [OK] button.
You are returned to the [TWAIN Driver] dialog box.
7. In the [TWAIN Driver] dialog box, click the [OK] button.
Changes made are saved and the [TWAIN Driver] dialog box closes.
8. From the ScandAll PRO window, perform a scan.
For information about how to scan documents, see Section 2.6 How to Use ScandAll PRO.
Scanned document images are displayed in the ScandAll PRO window.
All Rights Reserved. Copyright 2007 © PFU LIMITED](http://img.usermanuals.tech/thumb/26/59946/w64_fujitsu-fi6130-operators-manual-1488462901_d-83.png "Page 84
6. Click the [OK] button.
You are returned to the [TWAIN Driver] dialog box.
7. In the [TWAIN Driver] dialog box, click the [OK] button.
Changes made are saved and the [TWAIN Driver] dialog box closes.
8. From the ScandAll PRO window, perform a scan.
For information about how to scan documents, see Section 2.6 How to Use ScandAll PRO.
Scanned document images are displayed in the ScandAll PRO window.
All Rights Reserved. Copyright 2007 © PFU LIMITED")
![Page 85
fi-6130 / fi-6230 Image Scanner Operators Guide
TROUBLESHOOTING
CONTENTS MAP
TOP
3.8 Skipping Blank Pages
Blank pages in a document are detected and removed automatically. For ex\
ample, when scanning both double-sided and single-
sided documents together in duplex mode, you can obtain the scanned docu\
ment images without blank pages. Configure the
setting in the setup dialog box of the scanner driver.
The following shows the procedure for skipping blank pages using the FUJ\
ITSU...](http://img.usermanuals.tech/thumb/26/59946/w64_fujitsu-fi6130-operators-manual-1488462901_d-84.png "Page 85
fi-6130 / fi-6230 Image Scanner Operators Guide
TROUBLESHOOTING
CONTENTS MAP
TOP
3.8 Skipping Blank Pages
Blank pages in a document are detected and removed automatically. For ex\
ample, when scanning both double-sided and single-
sided documents together in duplex mode, you can obtain the scanned docu\
ment images without blank pages. Configure the
setting in the setup dialog box of the scanner driver.
The following shows the procedure for skipping blank pages using the FUJ\
ITSU...")
![Page 86
5. Select the [Job/Cache] tab.
6. Mark the [Blank Page Skip] checkbox.
If this checkbox is marked, cache mode is automatically changed to [Ram \
cache].
7. With the slider control under [Blank Page Skip], specify the Blank Page \
Skip degree.
For white pages, use the [Black Dots Ratio] slider bar to specify a degr\
ee of accuracy needed to skip blank pages. For
black pages, use the [White Dots Ratio] scroll bar to specify a degree o\
f accuracy needed to skip blank pages. The
value...](http://img.usermanuals.tech/thumb/26/59946/w64_fujitsu-fi6130-operators-manual-1488462901_d-85.png "Page 86
5. Select the [Job/Cache] tab.
6. Mark the [Blank Page Skip] checkbox.
If this checkbox is marked, cache mode is automatically changed to [Ram \
cache].
7. With the slider control under [Blank Page Skip], specify the Blank Page \
Skip degree.
For white pages, use the [Black Dots Ratio] slider bar to specify a degr\
ee of accuracy needed to skip blank pages. For
black pages, use the [White Dots Ratio] scroll bar to specify a degree o\
f accuracy needed to skip blank pages. The
value...")
6. Click the [OK] button. 7. Click the [OK] button in the [Print] dialog box. 8. Enter a file name, and then click the [Save] button in the [Save PDF Fil\ e As] dialog box. All Rights Reserved. Copyright 2007 © PFU LIMITED
fi-6130 / fi-6230 Image Scanner Operators Guide
TROUBLESHOOTING
CONTENTS MAP
TOP
3.7 Excluding a Color from Images (Dropout Color)
You can select a color from primary colors (red, green, and blue) to r\
emove (drop out) from a scanned document image.
(Note the dropout color can be specified only in binary (black & white\
) mode.) For example, when you scan a document
containing black text with green background, you can output an image of \
only black text.
Enable the dropout color setting in the setup dialog box of the scanner \
driver.
Original Created image
Example: When green is selected as a dropout color
The following shows the procedure to change settings in the setup dialog\
box of the FUJITSU TWAIN 32 Scanner Driver.
1. Place the document on the scanner.
For how to load documents on the ADF paper chute, see Section 2.2 Loading Documents on the ADF for Scanning.
For how to load documents on the Flatbed, see Section
2.3 Loading Documents on the Flatbed for Scanning [fi-6230
only].
2. Launch ScandAll PRO.
From the [Start] menu, select [All Programs] Õ [Fujitsu ScandAll PRO] Õ [Fujitsu ScandAll PRO] in the order presented.
Then, ScandAll PRO starts up.
3. From ScandAll PRO, display the setup dialog box of FUJITSU TWAIN 32.
For information about how to display the scanner drivers setup dialog b\
ox, see Section 2.6 How to Use ScandAll PRO.
4. In the [TWAIN Driver] dialog box, click the [Advance] button.
The [Advance] dialog box appears. 5. Select a color you want to remove, from the [Dropout Color] drop-down li\ st under [More]. For example, when you want to obtain only black text image from a docume\ nt containing black text outlined in green, select [Green] from the list. If you want no color to be dropped out, select [None].
6. Click the [OK] button. You are returned to the [TWAIN Driver] dialog box. 7. In the [TWAIN Driver] dialog box, click the [OK] button. Changes made are saved and the [TWAIN Driver] dialog box closes. 8. From the ScandAll PRO window, perform a scan. For information about how to scan documents, see Section 2.6 How to Use ScandAll PRO. Scanned document images are displayed in the ScandAll PRO window. All Rights Reserved. Copyright 2007 © PFU LIMITED
fi-6130 / fi-6230 Image Scanner Operators Guide TROUBLESHOOTING CONTENTS MAP TOP 3.8 Skipping Blank Pages Blank pages in a document are detected and removed automatically. For ex\ ample, when scanning both double-sided and single- sided documents together in duplex mode, you can obtain the scanned docu\ ment images without blank pages. Configure the setting in the setup dialog box of the scanner driver. The following shows the procedure for skipping blank pages using the FUJ\ ITSU TWAIN 32 scanner driver: 1. Place the document on the ADF paper chute. For details on how to place documents, see Section 2.2 Loading Documents on the ADF for Scanning. 2. Launch ScandAll PRO. From the [Start] menu, select [All Programs] Õ [Fujitsu ScandAll PRO] Õ [Fujitsu ScandAll PRO] in the order presented. Then, ScandAll PRO starts up. 3. From ScandAll PRO, display the setup dialog box of FUJITSU TWAIN 32. For information about how to display the scanner drivers setup dialog b\ ox, see Section 2.6 How to Use ScandAll PRO. 4. In the [TWAIN Driver] dialog box, click the [Option] button. The [Option] dialog box appears.
5. Select the [Job/Cache] tab. 6. Mark the [Blank Page Skip] checkbox. If this checkbox is marked, cache mode is automatically changed to [Ram \ cache]. 7. With the slider control under [Blank Page Skip], specify the Blank Page \ Skip degree. For white pages, use the [Black Dots Ratio] slider bar to specify a degr\ ee of accuracy needed to skip blank pages. For black pages, use the [White Dots Ratio] scroll bar to specify a degree o\ f accuracy needed to skip blank pages. The value displayed to the right of the slider bar shows a noise (dots) ra\ tio(*1). If a scanned page includes dots less than this value, the page is recognized as blank. You can select OFF(- -) o\ r a value from 0.2% to 3.0% (in increments of 0.2%). *1: Ratio of black dots included in a scanned area. (for white pages) Use the slider bar to specify a level in five levels from 1 to 5. The la\ rger the number, the higher the accuracy. 8. Click the [OK] button.
You are returned to the [TWAIN Driver] dialog box. 9. In the [TWAIN Driver] dialog box, click the [OK] button. Changes made are saved and the [TWAIN Driver] dialog box closes. 10. From the ScandAll PRO window, perform a scan. For information about how to scan documents, see Section 2.6 How to Use ScandAll PRO. Scanned document images are displayed in the ScandAll PRO window. All Rights Reserved. Copyright 2007 © PFU LIMITED
fi-6130 / fi-6230 Image Scanner Operators Guide TROUBLESHOOTING CONTENTS MAP TOP 3.9 Detecting Multifeeds Multifeed is a feeding error that occurs when two or more sheets in th\ e ADF paper chute are fed simultaneously into the scanner. You can set the scanner to detect multifeed, stop scanner operation, and\ display an error message. To set the scanner to detect multifeed, change the settings in the [TWAI\ N Driver] dialog box or in the Software Operation Panel. For how to configure the settings using the Software Operation Panel, se\ e Section 8.4 Multifeed Detection. The following shows the procedure to change settings in the FUJITSU TWAI\ N 32 Scanner Driver. 1. Place the document on the ADF paper chute. For details on how to place documents, see Section 2.2 Loading Documents on the ADF for Scanning. 2. Launch ScandAll PRO. From the [Start] menu, select [All Programs] Õ [Fujitsu ScandAll PRO] Õ [Fujitsu ScandAll PRO] in the order presented. Then, ScandAll PRO starts up. 3. From ScandAll PRO, display the setup dialog box of FUJITSU TWAIN 32. For information about how to display the scanner drivers setup dialog b\ ox, see Section 2.6 How to Use ScandAll PRO. 4. In the [TWAIN Driver] dialog box, click the [Option] button. The [Option] dialog box appears. 5. Select the [Job/Cache] tab.
6. Select how to detect multifeeds from the [Multifeed Detection] drop-down\ list under [ADF Option]. The following are how to detect multifeeds: None Multifeed detection is not performed. Check overlapping The scanner monitors the thickness of fed documents. The scanner detects\ a multifeed based on an increased thickness when multiple sheets are fed simultaneously. Check length The scanner monitors the length of fed documents. The scanner detects a \ multifeed based on an increased length when multiple sheets are fed simultaneously\ . Check overlapping and length The scanner monitors both document thickness and length to detect multif\ eeds. For more information on multifeed detection, see Section 7.5 Multifeed Detection Conditions. 7. Click the [OK] button. You are returned to the [TWAIN Driver] dialog box. 8. In the [TWAIN Driver] dialog box, click the [OK] button. Changes made are saved and the [TWAIN Driver] dialog box closes. 9. From the ScandAll PRO window, perform a scan. For information about how to scan documents, see Section 2.6 How to Use ScandAll PRO. Scanned document images are displayed in the ScandAll PRO window. All Rights Reserved. Copyright 2007 © PFU LIMITED
fi-6130 / fi-6230 Image Scanner Operators Guide TROUBLESHOOTING CONTENTS MAP TOP 3.10 Correcting Skewed Documents The skew of documents can be detected and corrected automatically by ena\ bling the Automatic Deskew function. Change the setting in the setup dialog box of the scanner driver. The following shows the procedure to change settings in the setup dialog\ box of the FUJITSU TWAIN 32 Scanner Driver. 1. Place the document on the ADF paper chute. For details on how to place documents, see Section 2.2 Loading Documents on the ADF for Scanning. 2. Launch ScandAll PRO. From the [Start] menu, select [All Programs] Õ [Fujitsu ScandAll PRO] Õ [Fujitsu ScandAll PRO] in the order presented. Then, ScandAll PRO starts up. 3. From ScandAll PRO, display the setup dialog box of FUJITSU TWAIN 32. For information about how to display the scanner drivers setup dialog b\ ox, see Section 2.6 How to Use ScandAll PRO. 4. In the [TWAIN Driver] dialog box, click the [Option] button. The [Option] dialog box appears. 5. Select the [Rotation] tab.