Fujitsu Fi6130 Operators Manual
Have a look at the manual Fujitsu Fi6130 Operators Manual online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 86 Fujitsu manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.
![Page 56
The [Batch Scan Setting] dialog box appears.
2. Do the following as necessary:
- To create a new profile:
Click the [Add] button.
A new profile appears in the [Profile Editor] dialog box. (Go to step \
3.)
- To create a new profile based on an existing profile:
Select a profile you want to use as the basis from the profile list, and\
then click the [Copy] button.
A new profile based on the selected profile appears in the [Profile Edi\
tor] dialog box. (Go to step...](http://img.usermanuals.tech/thumb/26/59946/w64_fujitsu-fi6130-operators-manual-1488462901_d-55.png "Page 56
The [Batch Scan Setting] dialog box appears.
2. Do the following as necessary:
- To create a new profile:
Click the [Add] button.
A new profile appears in the [Profile Editor] dialog box. (Go to step \
3.)
- To create a new profile based on an existing profile:
Select a profile you want to use as the basis from the profile list, and\
then click the [Copy] button.
A new profile based on the selected profile appears in the [Profile Edi\
tor] dialog box. (Go to step...")
![Page 57
[General] Tab
You can type in a profile name and description, and select a profile typ\
e.
[Scan] Tab
You can configure settings for a scanner to use.
Clicking the [Detail Scanner Settings] button displays the setup dialog \
box of the scanner driver.
[File format and Name scheme] Tab
You can specify various parameters for saving scanned document images.
[Document separator] Tab
You can select how to separate documents.
Each separated document is counted according to...](http://img.usermanuals.tech/thumb/26/59946/w64_fujitsu-fi6130-operators-manual-1488462901_d-56.png "Page 57
[General] Tab
You can type in a profile name and description, and select a profile typ\
e.
[Scan] Tab
You can configure settings for a scanner to use.
Clicking the [Detail Scanner Settings] button displays the setup dialog \
box of the scanner driver.
[File format and Name scheme] Tab
You can specify various parameters for saving scanned document images.
[Document separator] Tab
You can select how to separate documents.
Each separated document is counted according to...")
![Page 58
You are returned to the [Batch Scan Settings] dialog box.
Added or copied profiles by using the [Add] or [Copy] button appear in t\
he profile list.
A: From the menu (Method 1)
1. Place the document on the scanner.
For information about how to place documents, see Section 2.2 Loading Documents on the ADF for Scanning.
2. From the [Scan] menu, select [Batch Scan Settings].
The [Batch Scan Settings] dialog box appears.
3. Select a profile you want to use for...](http://img.usermanuals.tech/thumb/26/59946/w64_fujitsu-fi6130-operators-manual-1488462901_d-57.png "Page 58
You are returned to the [Batch Scan Settings] dialog box.
Added or copied profiles by using the [Add] or [Copy] button appear in t\
he profile list.
A: From the menu (Method 1)
1. Place the document on the scanner.
For information about how to place documents, see Section 2.2 Loading Documents on the ADF for Scanning.
2. From the [Scan] menu, select [Batch Scan Settings].
The [Batch Scan Settings] dialog box appears.
3. Select a profile you want to use for...")
![Page 59
B: From the menu (Method 2)
1. Place the document on the scanner.
For information about how to place documents, see Section 2.2 Loading Documents on the ADF for Scanning.
2. From the [Scan] menu, select [Batch Scan], and then select [a profile na\
me you want to use].
A document is scanned with the scanner, and the scanned document image \
is displayed on the ScandAll PRO
window, and then the image is saved to file.](http://img.usermanuals.tech/thumb/26/59946/w64_fujitsu-fi6130-operators-manual-1488462901_d-58.png "Page 59
B: From the menu (Method 2)
1. Place the document on the scanner.
For information about how to place documents, see Section 2.2 Loading Documents on the ADF for Scanning.
2. From the [Scan] menu, select [Batch Scan], and then select [a profile na\
me you want to use].
A document is scanned with the scanner, and the scanned document image \
is displayed on the ScandAll PRO
window, and then the image is saved to file.")
![Page 60
C: From the toolbar
1. Place the document on the scanner.
For information about how to place documents, see Section 2.2 Loading Documents on the ADF for Scanning.
2. From the [Select the Batch Profile] drop-down list on the toolbar, selec\
t a profile to use.
3. Click the [Start Batch Scan] button ( ) on the toolbar.
A document is scanned with the scanner, and the scanned document image i\
s displayed on the ScandAll PRO
window, and then the image is saved to file.](http://img.usermanuals.tech/thumb/26/59946/w64_fujitsu-fi6130-operators-manual-1488462901_d-59.png "Page 60
C: From the toolbar
1. Place the document on the scanner.
For information about how to place documents, see Section 2.2 Loading Documents on the ADF for Scanning.
2. From the [Select the Batch Profile] drop-down list on the toolbar, selec\
t a profile to use.
3. Click the [Start Batch Scan] button ( ) on the toolbar.
A document is scanned with the scanner, and the scanned document image i\
s displayed on the ScandAll PRO
window, and then the image is saved to file.")
![Page 62
fi-6130 / fi-6230 Image Scanner Operators Guide
TROUBLESHOOTING
CONTENTS MAP
TOP
Chapter 3 SCANNING VARIOUS TYPES OF DOCUMENTS
This chapter describes how to scan various types of documents, using the\
combination of ScandAll PRO and FUJITSU TWAIN 32
Scanner Driver as an example.
In this chapter, Windows XP screenshots are used as examples.
The screens and operations provided herein may be different from actual \
ones if the operating system you are using is not
Windows XP.
Please...](http://img.usermanuals.tech/thumb/26/59946/w64_fujitsu-fi6130-operators-manual-1488462901_d-61.png "Page 62
fi-6130 / fi-6230 Image Scanner Operators Guide
TROUBLESHOOTING
CONTENTS MAP
TOP
Chapter 3 SCANNING VARIOUS TYPES OF DOCUMENTS
This chapter describes how to scan various types of documents, using the\
combination of ScandAll PRO and FUJITSU TWAIN 32
Scanner Driver as an example.
In this chapter, Windows XP screenshots are used as examples.
The screens and operations provided herein may be different from actual \
ones if the operating system you are using is not
Windows XP.
Please...")
![Page 63
fi-6130 / fi-6230 Image Scanner Operators Guide
TROUBLESHOOTING
CONTENTS MAP
TOP
3.1 Scanning Both Sides of Documents
1. Place the document on the ADF paper chute.
For details on how to place documents, see Section 2.2 Loading Documents on the ADF for Scanning.
2. Launch ScandAll PRO.
From the [Start] menu, select [All Programs] Õ [Fujitsu ScandAll PRO] Õ [Fujitsu ScandAll PRO] in the order presented.
Then, ScandAll PRO starts up.
3. From ScandAll PRO, display the setup...](http://img.usermanuals.tech/thumb/26/59946/w64_fujitsu-fi6130-operators-manual-1488462901_d-62.png "Page 63
fi-6130 / fi-6230 Image Scanner Operators Guide
TROUBLESHOOTING
CONTENTS MAP
TOP
3.1 Scanning Both Sides of Documents
1. Place the document on the ADF paper chute.
For details on how to place documents, see Section 2.2 Loading Documents on the ADF for Scanning.
2. Launch ScandAll PRO.
From the [Start] menu, select [All Programs] Õ [Fujitsu ScandAll PRO] Õ [Fujitsu ScandAll PRO] in the order presented.
Then, ScandAll PRO starts up.
3. From ScandAll PRO, display the setup...")
![Page 65
fi-6130 / fi-6230 Image Scanner Operators Guide
TROUBLESHOOTING
CONTENTS MAP
TOP
3.2 Scanning Books [fi-6230 only]
CAUTION
Never look into the light source directly during scanning.
1. Open the document cover.
2. Remove the document cover as shown in the figure below.
3. Read the document on the document bed face down.
4. Launch ScandAll PRO.
From the [Start] menu, select [All Programs] Õ [Fujitsu ScandAll PRO] Õ [Fujitsu ScandAll PRO] in the order presented.
Then,...](http://img.usermanuals.tech/thumb/26/59946/w64_fujitsu-fi6130-operators-manual-1488462901_d-64.png "Page 65
fi-6130 / fi-6230 Image Scanner Operators Guide
TROUBLESHOOTING
CONTENTS MAP
TOP
3.2 Scanning Books [fi-6230 only]
CAUTION
Never look into the light source directly during scanning.
1. Open the document cover.
2. Remove the document cover as shown in the figure below.
3. Read the document on the document bed face down.
4. Launch ScandAll PRO.
From the [Start] menu, select [All Programs] Õ [Fujitsu ScandAll PRO] Õ [Fujitsu ScandAll PRO] in the order presented.
Then,...")
![Page 66
For information about how to display the scanner driver’s setup dialo\
g box, see Section 2.6 How to Use ScandAll PRO.
6. Select [Flat Bed] under [Scan Type].
7. Click the [OK] button.
Changes made on this dialog box are saved and the setup dialog box of F\
UJITSU TWAIN 32 closes.
8. From the ScandAll PRO window, perform a scan.
For information about how to scan documents, see Section 2.6 How to Use ScandAll PRO.
ATTENTION Do not move the document during scanning.
Scanned document images...](http://img.usermanuals.tech/thumb/26/59946/w64_fujitsu-fi6130-operators-manual-1488462901_d-65.png "Page 66
For information about how to display the scanner driver’s setup dialo\
g box, see Section 2.6 How to Use ScandAll PRO.
6. Select [Flat Bed] under [Scan Type].
7. Click the [OK] button.
Changes made on this dialog box are saved and the setup dialog box of F\
UJITSU TWAIN 32 closes.
8. From the ScandAll PRO window, perform a scan.
For information about how to scan documents, see Section 2.6 How to Use ScandAll PRO.
ATTENTION Do not move the document during scanning.
Scanned document images...")
fi-6130 / fi-6230 Image Scanner Operators Guide TROUBLESHOOTING CONTENTS MAP TOP Chapter 3 SCANNING VARIOUS TYPES OF DOCUMENTS This chapter describes how to scan various types of documents, using the\ combination of ScandAll PRO and FUJITSU TWAIN 32 Scanner Driver as an example. In this chapter, Windows XP screenshots are used as examples. The screens and operations provided herein may be different from actual \ ones if the operating system you are using is not Windows XP. Please take note that, when the FUJITSU TWAIN 32 scanner driver is updat\ ed, the screens and operations herein may also be slightly different. If so, refer to the document provided with the update. All Rights Reserved. Copyright 2007 © PFU LIMITED
fi-6130 / fi-6230 Image Scanner Operators Guide TROUBLESHOOTING CONTENTS MAP TOP 3.1 Scanning Both Sides of Documents 1. Place the document on the ADF paper chute. For details on how to place documents, see Section 2.2 Loading Documents on the ADF for Scanning. 2. Launch ScandAll PRO. From the [Start] menu, select [All Programs] Õ [Fujitsu ScandAll PRO] Õ [Fujitsu ScandAll PRO] in the order presented. Then, ScandAll PRO starts up. 3. From ScandAll PRO, display the setup dialog box of FUJITSU TWAIN 32. For information about how to display the scanner driver’s setup dialo\ g box, see Section 2.6 How to Use ScandAll PRO. 4. Select [ADF [Duplex]] under [Scan Type]. 5. Click the [OK] button. Changes made on this dialog box are saved and the setup dialog box of F\ UJITSU TWAIN 32 closes. 6. From the ScandAll PRO window, perform a scan. For information about how to scan documents, see Section 2.6 How to Use ScandAll PRO.
Scanned document images are displayed in the ScandAll PRO window. All Rights Reserved. Copyright 2007 © PFU LIMITED
fi-6130 / fi-6230 Image Scanner Operators Guide TROUBLESHOOTING CONTENTS MAP TOP 3.2 Scanning Books [fi-6230 only] CAUTION Never look into the light source directly during scanning. 1. Open the document cover. 2. Remove the document cover as shown in the figure below. 3. Read the document on the document bed face down. 4. Launch ScandAll PRO. From the [Start] menu, select [All Programs] Õ [Fujitsu ScandAll PRO] Õ [Fujitsu ScandAll PRO] in the order presented. Then, ScandAll PRO starts up. 5. From ScandAll PRO, display the setup dialog box of FUJITSU TWAIN 32.
For information about how to display the scanner driver’s setup dialo\ g box, see Section 2.6 How to Use ScandAll PRO. 6. Select [Flat Bed] under [Scan Type]. 7. Click the [OK] button. Changes made on this dialog box are saved and the setup dialog box of F\ UJITSU TWAIN 32 closes. 8. From the ScandAll PRO window, perform a scan. For information about how to scan documents, see Section 2.6 How to Use ScandAll PRO. ATTENTION Do not move the document during scanning. Scanned document images are displayed in the ScandAll PRO window. 9. When scanning ends, re-attach and gently close the document cover. All Rights Reserved. Copyright 2007 © PFU LIMITED
fi-6130 / fi-6230 Image Scanner Operators Guide TROUBLESHOOTING CONTENTS MAP TOP 3.3 Scanning Large Documents with Flatbed [fi-6230 only] 1. Open the document cover. 2. Remove the document cover as shown in the figure below. 3. Load the document on the document bed face down. 4. Launch ScandAll PRO. From the [Start] menu, select [All Programs] Õ [Fujitsu ScandAll PRO] Õ [Fujitsu ScandAll PRO] in the order presented. Then, ScandAll PRO starts up. 5. From ScandAll PRO, display the setup dialog box of FUJITSU TWAIN 32. For information about how to display the scanner drivers setup dialog b\ ox, see Section 2.6 How to Use ScandAll PRO.
6. Select [Flat Bed] under [Scan Type]. 7. Click the [OK] button. Changes made on this dialog box are saved and the setup dialog box of F\ UJITSU TWAIN 32 closes. 8. From the ScandAll PRO window, perform a scan. For information about how to scan documents, see Section 2.6 How to Use ScandAll PRO. ATTENTION Do not move the document during scanning. Scanned document images are displayed in the ScandAll PRO window. 9. When scanning ends, re-attach and gently close the document cover. All Rights Reserved. Copyright 2007 © PFU LIMITED
fi-6130 / fi-6230 Image Scanner Operators Guide TROUBLESHOOTING CONTENTS MAP TOP 3.4 Scanning Documents of Different Widths When you scan documents of different widths at one time from the ADF, so\ me documents that are small in paper size may be skewed or may not be fed into the scanner. It is recommended that onl\ y documents of the same width be scanned at one time. In the case where you have to scan documents of different widths togethe\ r, scan them, following the procedure below. 1. To prevent images from skewing, select [Automatic Page Size Detection] f\ rom the [Automatic Size and Skew Detection] drop-down list. For details, see Section 3.10 Correcting Skewed Documents. 2. Center all documents as shown in the figure below. 3. Place the documents on the ADF paper chute, and then adjust the side gui\ des so that they lightly touch the widest sheets of paper. ATTENTION When placing a stack of documents on the scanner, make sure that all doc\ uments are directly under the pick roller. Off-center documents, which are not unde\ r the pick roller, cannot be fed into the scanner. 4. From the ScandAll PRO window, perform a scan. For information about how to scan documents, see Section 2.6 How to Use ScandAll PRO. Scanned document images are displayed in the ScandAll PRO window. All Rights Reserved. Copyright 2007 © PFU LIMITED
fi-6130 / fi-6230 Image Scanner Operators Guide TROUBLESHOOTING CONTENTS MAP TOP 3.5 Scanning Documents Longer Than A4/Letter Size 1. Load the documents on the ADF paper chute. For details on loading documents, see Section 2.2 Loading Documents on the ADF for Scanning. 2. Launch ScandAll PRO. From the [Start] menu, select [All Programs] Õ [Fujitsu ScandAll PRO] Õ [Fujitsu ScandAll PRO] in the order presented. Then, ScandAll PRO starts up. 3. From ScandAll PRO, display the setup dialog box of FUJITSU TWAIN 32. For information about how to display the scanner driver’s setup dialo\ g box, see Section 2.6 How to Use ScandAll PRO. 4. Select [Long page (Front Side)] or [Long page (Duplex)] from [Scan T\ ype]. Select [Long page (Front Side)] for single-sided scanning; [Long page \ (Duplex)] for double-sided scanning. The [Long Page Paper Size Setting] window appears. 5. Specify a document length, and then click the [OK] button.