Fujitsu Fi6130 Operators Manual

							
 
  
5.  In the driver setup dialog box, configure settings for scanning.
  
6.  Scan the document.
 
  
7.  Save the scanned document image files.
 
 
 HINT 
l     In this section, screenshots taken in ScandAll PRO are used as examples.\
 
Depending on the application you use, procedures and operations may diff\
er from 
those examples herein.
l     For more information about how to scan documents by using ScandAll PRO, \
see 
Section 
2.6 How to Use ScandAll PRO. 
If you want to use other applications for scanning, refer to the respect\
ive 
manuals that come with the applications.
   
  
All Rights Reserved. Copyright 2007 © PFU LIMITED 
						

							
fi-6130 / fi-6230 Image Scanner Operators Guide
 
 
 
TROUBLESHOOTING 
CONTENTS MAP 
TOP    
 
 2.5 How to Use the Scanner Drivers
 
 
To scan documents with the scanner, a scanner driver and application sup\
ported by the driver are prerequisites.  
This scanner is accompanied with two drivers; one is a TWAIN-compliant d\
river, FUJITSU TWAIN 32 Scanner Driver, and the 
other is an ISIS-compliant driver, FUJITSU ISIS Scanner Driver, and an a\
pplication named ScandAlll PRO, which supports both 
the drivers FUJITSU TWAIN 32 and FUJITSU ISIS.
In this section, how to use these drivers is described. 
For information about how to use ScandAll PRO and how to invoke a scanne\
r driver via ScandAll PRO, see Section 
2.6 How to 
Use ScandAll PRO.
 
 FUJITSU TWAIN 32 Scanner Driver
 
The FUJITSU TWAIN 32 Scanner Driver is a driver for scanning documents w\
ith the scanner based on a TWAIN-compliant 
application. 
Usually, you can configure the scanner settings in the scanner driver’\
s setup dialog box, invoking a scanner driver via an 
application. (Depending on the application settings, this setup dialog \
box may not appear.) 
 
  HINT 
How to invoke a scanner driver varies depending on the application. For \
details, refer to the 
manual or help of the application you use.  
For information about how to invoke a driver via ScandAll PRO, see Secti\
on 
2.6 How to Use 
ScandAll PRO. 
 
FUJITSU TWAIN 32 Scanner Driver Setup 
						

							
 
Configure the FUJITSU TWAIN 32 Scanner Driver settings in the dialog box\
 above. 
Major setting items are listed below. 
* For details on each function, refer to FUJITSU TWAIN 32 Scanner Drive\
r Help.
 
Resolution
 
You can specify the resolution for scanning images. 
Default values are selectable from the drop-down list, and a [custom] va\
lue (can be specified in increments of 1 dpi 
from 50 to 600 dpi) can also be selected by clicking a pair of up/down \
buttons. 
By marking the [Predefine] checkbox, you can select one of three predefi\
ned settings, [Best], [Better], and 
[Normal], and this allows you to scan documents simply and quickly.  
You can also set values of [Best], [Better], and [Normal] as desired in \
a window that appears when the [...] button 
is clicked.
 
  
Scan Type
 
You can specify the scanning side(s) of document or feeding source [fi\
-6230 only]; Front Side, Back Side, Duplex, 
or Flatbed. You can specify Front Side or Duplex for long-page documents\
 whose size is longer than A3. 
  
Paper Size
 You can select the size of documents to be scanned from the list. 
Windows for customizing the paper size will appear when you click the [.\
..] button.  
You can save any document size as a customized setting (up to three) o\
r for changing the order of paper sizes in 
the list.
 
  
Image Mode
 You can specify the image type to output the scanned documents. 
						

							
 
Black & White Documents are scanned in binary (black and white) mode.
Halftone Documents are scanned through halftone processing in binary (black and \
white) mode.
Grayscale Documents are scanned in gradations from black to white. In this mode, y\
ou can 
select 256 gradations or 4 bits (16 gradations).
Color Documents are scanned in color mode. In this mode, you can select 24 bit\
 Color, 256 
Colors, or 8 Colors.
  
[Scan] Button
 Clicking this button starts scanning documents with the current settings\
.
  
[Preview] Button
 Documents are scanned preliminarily before the actual scanning. 
You can confirm the image of the documents in the preview window.
  
[OK]/[Close] Button
 Clicking this button saves the current settings and closes this window.
  
[Reset] Button
 This button is used to undo changes of settings.
  
[Help] Button
 Clicking this button opens the [FUJITSU TWAIN 32 Scanner Driver Help] wi\
ndow.  
The window also opens by pushing the [F1] key.
  
[About] Button
 Clicking this button opens an information window about the FUJITSU TWAIN\
 32 Scanner Drivers version.
  
[Option] Button
 You can set options in the dialog box below.
  
  
						

							
   
 
[Rotation] Tab
  Select this tab when configuring settings for the image rotation, docume\
nt size and skew detection, overscan, hole 
punch removal, and split image.
    
 
[Job/Cache] Tab
  Select this tab when setting cache mode, multifeed detection, blank page\
 skipping, etc.
    
 
[Generic] Tab
  Select this tab to change the unit displayed in the Setting Window for t\
he FUJITSU TWAIN 32 Scanner Driver.  
Select [mm], [inch], or [pixel].
    
 
[Startup] Tab
  Select this tab for configuring settings on the scanners Operator Panel\
.
    
 
[Filter] Tab
  Select this tab for setting the image processing filter(s).
 
Digital Endoser A character string (alphanumerics) can be added in the scanned documen\
t.
Page Edge Filler Fills up the margins of the scanned document images with a selected colo\
r.
 
  
 [Compression] Tab
 Select this tab for setting the compression rate of JPEG Transfer.
   
[Advance] Button
 Click this button for settings of the advanced image processing. 
You can set Edge Extract, Gamma Pattern, Dropout Color, Reverse, etc. 
						

							
   
[Config] Button
 Click this button for configuring the Setting Files. 
You can save the changes made to a Setting File. From the next scanning,\
 a set of settings are quickly switched by 
using these Setting Files.
 
 
For details of each function, refer to the FUJITSU TWAIN 32 Scanner Dri\
ver Help.
  
 FUJITSU ISIS Scanner Driver 
  
The FUJITSU ISIS Scanner Driver is a driver software used to scan docume\
nts with a scanner from an ISIS-compliant 
application. 
Usually, you configure settings for scanning in the setup dialog box of \
the scanner driver, which is invoked from an application. 
(Depending on the application setting, the setup dialog box may not be \
displayed.)
   HINT 
How to invoke a scanner driver varies depending on the application. For \
details, refer to the 
manual or help of the application you use.  
For information about how to invoke a driver via ScandAll PRO, see Secti\
on 
2.6 How to Use 
ScandAll PRO.
 
FUJITSU ISIS Scanner Driver Setup
  
[Main] Tab
 
Camera 
						

							
 
You can selects a side or sides to scan. 
The marked checkbox side is targeted for scanning. 
When you mark only the Front Image checkbox, simplex scanning is perform\
ed. When you mark both the Front 
Image and Back Image checkboxes, duplex scanning is performed. 
You can also specify two settings (#1/#2), Color/Grayscale and Binary \
(black-and-white), for each side, and 
output two types of images at a scan (multi-image). 
Settings configured in this dialog box take effect on the selected side \
or sides (Front Image #1/Front Image #2/
Back Image #1/Back Image #2). 
 
  HINT 
If you select Color or Grayscale mode for a side (Front Image #1 or Bac\
k Image #1), you 
can select only Binary (black-and-white) mode for the same side (Fron\
t Image #2 or Back 
Image #2, respectively). In turn, if you select Binary (black-and-whit\
e) mode for a side 
(Front Image #1 or Back Image #1), you can select either Color or Gray\
scale mode for the 
same side (Front Side #2 or Back Image #2, respectively).
  
Mode
 You can select a color mode to use from the menu.
 
IPC Documents are scanned in binary (black-and-white) mode with Image 
Processing Software Option. When this setting is selected, the [Setup IP\
C] 
button below becomes selectable. (This button is visible only if Image \
Processing Software Option is installed on the computer.)
Black & White Documents are scanned according to a binary threshold. Black and white 
are distinguished based on this set threshold. This mode is suitable for\
 
scanning line drawings and text only documents.
16-level Grayscale Documents are scanned in 16 gray levels. In this mode, each pixel uses 4\
 
bits.
256-level Grayscale Documents are scanned in 256 gray levels. In this mode, each pixel uses \
8 
bits.
24-bit Color Documents are scanned as 24-bit full-color images. This mode is suitable\
 
for scanning color photographs. More memory is used than in Grayscale 
mode.
Auto Detect 
16-level Grayscale 
256-level Grayscale 
24-bit Color This mode automatically detects whether the scanned documents are color \
or binary (black-and-white). In this mode, color documents are output \
as 
color or grayscale images, and monochrome documents are output as 
binary (black-and-white) images. Under [Camera], configure settings fo\
r 
detected-as-color documents with #1, and configure settings for detected\
-
as-black-and-white documents with #2.
  
[Setup IPC] Button
 Click this button when configuring settings for scanning with Image Proc\
essing Software Option. 
 
 
 HINT 
For how to configure settings for Image Processing Software Option, refe\
r to Image 
Processing Software Option User’s Guide. To view Image Processing S\
oftware Option User’s 
Guide, from the [start] menu, select [All Programs] Õ [Image Processing Software Option] Õ 
[USER’S GUIDE].
   
Resolution
 
You can specify the number of pixels (dots) per inch. 
Select a preset resolution from the list or type in any value (from 50 \
to 600, or 1200) in the box. 
(If you enter a number from 601 to 1199, the resolution is automaticall\
y set to 300 dpi.) 
The higher the resolution, the more memory is required.
   
						

							
Halftone
 You can select a halftone pattern. This setting is available when [Black\
 and White] is selected under [Mode]. 
 
Dither Pattern 0This setting is suitable for scanning highly-colored photographs.
Dither Pattern 1 This setting is suitable for scanning highly-colored documents containin\
g 
both text and photographs.
Dither Pattern 2 This setting is suitable for scanning lightly-colored photographs.
Dither Pattern 3 This setting is suitable for scanning lightly-colored documents containi\
ng 
both text and photographs.
Error Diffusion This function minimizes differences between a target pixel and pixels ne\
ar 
the target. 
Download This function processes gray tone images with the dithered pattern 
downloaded.
  
Cropping
 Select how to crop scanned document images to output. 
 
Fixed Scanned document images are output in a specified size. 
Detect Length The rear end of a scanned document is detected and scanning is 
performed for the original length. When shorter sheets are included in a\
 
batch of documents to scan, output images are adjusted to their original\
 
size. 
Automatic The page size of the scanned documents is automatically detected and 
the images are output in the detected page size. The skew of documents 
is also automatically detected and corrected to output correct images.
Long Page The page size of the scanned long page document is automatically 
detected and the images are output in the detected page size. The skew 
of the documents is also automatically detected and corrected to output \
correct images.
  
Brightness
 You can set the brightness of the entire image. Specify a number from 1 \
(darkest) to 255 (brightest) as the 
brightness value. The higher the value, the brighter the image. The lowe\
r the value, the darker the image.
  
Contrast
 
You can set the contrast of the scanned image. Specify a number from 1 (\
low [soft]) to 100 (high [sharp]) to 
increase brightness for the entire image. Select a higher value to empha\
size the difference in brightness between 
the light and dark areas of the image.
  
[Layout] Tab 
						

							
   
Page Orientation
  You can select the page orientation (Portrait or Landscape).
   
 
Page Size
 You can specify the paper size of documents to be scanned. Select a size\
 from the drop-down list. 
You can also specify the width and length of the documents directly by s\
electing Custom in the drop-down list.
   
Split Image 
 You can split a scanned image into two. You can also rotate the split im\
ages by specifying the rotation angle.
   
[Scan Area] Button
 Clicking this button displays the [Scan Area] dialog box. 
You can specify an area to be scanned for a page of the selected size. B\
y dragging the rectangle on the page with 
the mouse, you can change the size of the area. You can also specify the\
 area by typing in numbers in the boxes.
  
						

							
  
[Image Processing] Tab
  
Quick Set