Fujitsu Fi6130 Operators Manual

							
  HINT 
When the Timeout for Manual Feeding is enabled, the scanner waits for th\
e document to be 
loaded within the specified timeout period, even if scanning starts with\
 no document loaded in 
the ADF paper chute.
 
 
  
All Rights Reserved. Copyright 2007 © PFU LIMITED 
						

							
fi-6130 / fi-6230 Image Scanner Operators Guide
 
 
 
TROUBLESHOOTING 
CONTENTS MAP 
TOP    
 
 8.11 Power ON/OFF Control Setting 
 
 
 
You can select how to power the scanner on/off; by pressing the Power bu\
tton, or by connecting/disconnecting the AC cable. 
Configure the settings for power on/off control as follows.
 
1.  Start up the Software Operation Panel.
 See Section 8.1 Scanner Settings.
  
2.  Select [Device Setting 2] from the left side list in the window, and sel\
ect [Power SW Control] from  its lower level. 
  
 
  
3.  To power on/off the scanner by pressing the Power button, select [Enable\
 power switch]. To power on/off the scanner by connecting/disconnecting the AC cable, selec\
t [Disable power 
switch]. 
   
All Rights Reserved. Copyright 2007 © PFU LIMITED 
						

							
fi-6130 / fi-6230 Image Scanner Operators Guide
 
 
 
TROUBLESHOOTING 
CONTENTS MAP 
TOP    
 
 Chapter 9 SCANNER SPECIFICATION
 
 
 
This chapter lists the scanner specifications.
  
 
 
 
 
All Rights Reserved. Copyright 2007 © PFU LIMITED 
						

							
fi-6130 / fi-6230 Image Scanner Operators Guide
 
 
 
TROUBLESHOOTING 
CONTENTS MAP 
TOP    
 
 9.1 Basic Specifications
 
 
 
Item  Specification Notice
Scanner type fi-6130 fi-6230  
ADF (Automatic Document 
Feeder) ADF + Flatbed
Image sensor  fi-6130 fi-6230  
Color CCD x 2 (Front, 
Back)  Color CCD x 3 (Front, Back, Flatbed)
Light source  fi-6130 fi-6230  
White cold cathode 
fluorescent lamp: 
 x2 (Front, Back)   White cold cathode fluorescent 
lamp: x3 (Front, Back, Flatbed)
Scanning 
area  Minimum
A8 (Portrait) (Note (*1)) ADF 
127 g/m
2 to  
210 g/m2 
(34 to 56 lb) paper
Maximum  ADF: A4/letter or legal  
(Long page scanning: 216 x 864 mm or 8.50 x 34.00 in, 
or 210 x 3048 mm or 8.40 x 121.92 in) 
Flatbed (fi-6230): 216 x 297 mm (8.50 x 11.69 in) (Note (*2))
Paper weight 41 g/m
2 to 210 g/m2 (11 to 56 lb)  (Note (*3))
Scanning 
speed 
(A4/
letter 
portrait) 
(Note 
(*4)) Binary 
(monochrome) 
Simplex: 40 sheets/min. 
Duplex: 80 sides/min. 200 dpi
Grayscale
Color Simplex: 30 sheets/min. 
Duplex: 60 sides/min.
Binary 
(monochrome) 300 dpi
Grayscale
Color
Capacity of ADF 50 sheets  A4/letter, 80 g/
m
2 (21 lb) (Note 
(*5))
Optical resolution 600 dpi -
Output 
resolution Binary 
(monochrome) 50 to 600 dpi, 1200 dpi (*6) 
Scalable in 1 dpi 
increments
Grayscale 50 to 600 dpi, 1200 dpi (*6) Scalable in 1 dpi 
increments
Color 50 to 600 dpi, 1200 dpi (*6) Scalable in 1 dpi 
increments
Grayscale level 8 bits per color Internal 10 bits
Halftone patterns Dither / error diffusion -
Interface USB2.0 / 1.10(Note (*7)) B type
Other function JPEG compression  -
Imprinter Port (fi-6130 only) (Note (*8)) - 
						

							
Option Name: Black document pad [fi-6230 only]  
Parts No.: PA03540-D801 (Note (*9))  -
Name: IMPRINTER [fi-6130 only]  
Parts No.: PA03540-D201
 *1 
  The minimum size for scanning is A8 when using the ADF. When using the F\
latbed (fi-6230 only) to scan the minimum 
scanning range is virtually unlimited. 
 *2
If you specify a long page which is 864 mm or longer, you must specify\
 a resolution of 200 dpi or less.
 
*3 
 The documents thicknesses noted are for when using the ADF. When using \
the Flatbed to scan the documents 
thickness is unlimited. 
For details, see Chapter 
7 ADF AND PAPER SPECIFICATION.
 *4 
 The scanning speed is the maximum speed of the scanner hardware. Softwar\
e processing time such as data transfer 
time is added to the actual scanning time.
 *5 
 The maximum stacking capacity varies according to the document thickness\
. For details, see Chapter 7 ADF AND 
PAPER SPECIFICATION.
 
*6 
 At a high resolution of 600 dpi or more, scanning may be disabled depend\
ing on the scan mode, the size of documents, 
and/or memory capacity of your computer. 
 
*7 
 If you connect the scanner with USB 2.0, it is required that the USB por\
t and the Hub are compliant with USB 2.0. The 
scanning speed may slow down when you connect the scanner with USB 1.1. \
If your omputer has the compatible USB 
2.0 port, please use it.
 
*8 
 By using the Imprinter, a character string, such as the alphabet and num\
bers, can be printed in the scanned 
document. It helps you to organize your documents by printing a name, da\
te, time or a serial number on the scanned 
document. 
 *9
An option that replaces the standard document cover (with a white pad)\
 provided with the scanner, and can be used 
for scanning documents in black background when loading from the Flatbed\
. 
 
All Rights Reserved. Copyright 2007 © PFU LIMITED 
						

							
fi-6130 / fi-6230 Image Scanner Operators Guide
 
 
 
TROUBLESHOOTING 
CONTENTS MAP 
TOP    
 
   9.2 Installation Specifications 
 
 
Item Specification
Dimensions 
(fi-6130: Without ADF paper chute 
and stacker) Depth
WidthHeight
fi-6130: 160 mm  
(6.4 in)  
fi-6230: 567 mm 
(22.9 in)  fi-6130: 301 mm 
(11.8 in)  
fi-6230: 301 mm 
(11.8 in) fi-6130: 158 mm 
(6.2 in)  
fi-6230: 229 mm 
(9.0 in) 
Installation space DepthWidthHeight
fi-6130: 700 mm 
(27.6 in)  
fi-6230: 800 mm 
(31.5 in)  fi-6130: 400 mm 
(15.8 in)  
fi-6230: 400 mm 
(15.8 in)fi-6130: 380 mm 
(15.0 in)  
fi-6230: 450 mm 
(17.8 in) 
Weight fi-6130: 4.2 kg (9.24 lb)  
fi-6230: 8.8 kg (19.36 lb) 
Input power Voltage  AC 100 to 240 V ±10% 
Phases  Single-phase
Frequency 50/60 ±3 Hz
Power consumption fi-6130: 38 W or less  
fi-6230: 45 W or less 
Ambient condition Device status  Operating Not operating
Temperature 5 to 35ºC (41 to 
95ºF) –20 to 60ºC (–4 to 140ºF)
Humidity  20 to 80% 8 to 95%
Calorific value  fi-6130: 32.6 kcal/H or less  
fi-6230: 38.6 kcal/H or less 
Shipping weight fi-6130: 6.5 kg (14.3 lb)  
fi-6230: 13.0 kg (28.6 lb) 
Support warranty period  5 years
 
 ATTENTION
 
Installation Space is the reference value of an installation space requi\
red to read A4/letter 
size documents.
  
All Rights Reserved. Copyright 2007 © PFU LIMITED 
						

							
fi-6130 / fi-6230 Image Scanner Operators Guide
 
 
 
TROUBLESHOOTING 
CONTENTS MAP 
TOP    
 
 9.3 External Dimensions
 
 
 
The following shows the external dimensions:
fi-6130 
    
 
fi-6230 
 
(Unit:mm) 
 
 
All Rights Reserved. Copyright 2007 © PFU LIMITED 
						

							
fi-6130 / fi-6230 Image Scanner Operators Guide
 
 
 
TROUBLESHOOTING 
CONTENTS MAP 
TOP    
 
 APPENDIX 1 Before Using the [Scan] or [Send to] Button
 
 
 
 
By setting the link of the application software to the [Scan] or [Send t\
o] button, you can launch the linked application by simply 
pushing the button. 
(To use ScandAll PRO, read Section 
3.15 Scanning by Pressing the Scan Button on the Scanner.)
 
 Settings to Configure on the Computer
  1.  Confirm if the scanner is connected correctly to the PC, then power on t\
he scanner.
For how to connect the scanner to your computer, refer to section 2.2 C\
onnecting the Scanner to Your PC in fi-
6130/fi-6230 Getting Started.
2.  From the [Start] menu, select [Control Panel]. 
 The [Control Panel] window appears.
3.  Double-click on the [Printers and Other Hardware] icon.
 The [Printers and Other Hardware] window appears.
4.  Double-click on the [Scanners and Cameras] icon.
 The [Scanners and Cameras] window appears.
5.  Display the [fi-6130dj Properties] or [fi-6230dj Properties] dialog box.\
In Windows XP or Windows Server 2003, right-click on the [fi-6130dj] or \
[fi-6230dj] icon, and then select 
[Properties].  
In Windows 2000 or Windows Vista, double-click on the [fi-6130dj] or [fi\
-6230dj] icon.
6.  Select the [Events] tab.
7.  Select an Event. For Windows XP, select the event for starting up any ap\
plication from the [Select  an event] menu.
  
						

							
 
 
The events available for this function are:
l     Scan Button (Press the [Scan] button)
l     Send to 1 to 9 (With a number from 1 to 9 displayed on the Function Num\
ber Display, press the [Send to] 
button)
8.  Select the application with its process, excuted by the event. For Windo\
ws XP, click [Start this program] under [Actions] and select the application from the menu.
  
						

							
 9.  Click the [OK] button.
 
 HINT
 
The window and operations may vary depending on your OS.
 
 Settings to Configure on the Scanner 
 
 Function Number Display 
 [Function] button  
 [Send to] button  
 [Scan] button 
 
l     When using the [Scan] button
No setting is needed. 
 Pressing the [Scan] button starts up the application configured.