Fujitsu Fi6130 Operators Manual

							
 
 Some image-processing-related settings, which are commonly used, are rea\
dily available. Select a setting 
pattern, and you do not have to configure settings one by one. The follo\
wing setting patterns are available 
(Selectable only when [Black and White] is selected under [Mode]):
 
Normal documents 
(default) This setting pattern is suitable for scanning business documents often 
handled in the office.
Advanced DTC Any types of documents are binarized in good conditions. Even if you 
scan documents containing light text, text on the colored background, 
and color charts, which do not lend themselves to scanning based on the \
ordinary binarization, you can obtain high-quality images. 
NCR forms with back-
ground removed You can remove the background and smooth out jaggies in the image.
Magazines, Brochures, 
etc. This setting pattern is suitable for scanning magazines and brochures, 
which contain both text and images.
Custom Settings You can specify the following image-processing-related settings 
separately.
  
DTC Variance
 You can select a DTC Variance setting depending on the brightness of the\
 image.
   
Edge Processing
 You can select a setting depending on how sharp you want to make the ima\
ge. 
 
Low, Mid, High Outlines of images are emphasized. Select a setting from Low, Mid, and 
High.
Smoothing Jaggies are smoothed.
  
Reverse Image Format
 You can output reversed images.
   
Overscan
 You can set the overscan function. Documents are scanned in a paper size\
 larger than the one specified in the 
[Paper Size] drop-down list.
   
Hole Punch Removal
 When scanning punched documents that have punch holes on them, their ima\
ges are output with punch holes 
removed. The background color is black. 
 
Fill with white Punch hole marks are filled with white.
Background color Punch hole marks are filled with the most used color around the punch 
holes.
 When scanning a color document, select [Background color]. If you select\
 [Fill with white], punch holes will be 
filled with white.
   
[Paper Handling] Tab 
						

							
  
Pre-pick
 Pre-picking is a function that prepares the next document for scanning, \
feeding it to the position at which the 
scanning starts beforehand. You can specify whether you want to enable P\
re-picking or not from this drop-down 
list.
   
Backing
 You can specify the background color, white or black.
   
Multifeed Detection
 Multifeed refers to an error that occurs when more than one sheet of pap\
er is fed into the ADF at the same time. 
You can specify based on what (overlap or length) a multifeed error ca\
n be detected so that you can stop 
scanning at error detection and receive an error message.
 
Do not stop scanning upon detection
  If this checkbox is marked, the scanner ignores multifeed errors and con\
tinues scanning.
   
Multifeed Recovery 
 Mark the [On] checkbox under [Multifeed Recovery]. 
 
Auto-cancel Timer
  Scanning is not restarted for the set period of time (minutes) after a\
 multifeed error. If scanning is not started 
after the set minutes, the application is notified of the error by the d\
river. Note that if the Auto-cancel Timer is set 
to 0, the application will never be notified of the error. 
   
[Gamma] Tab 
						

							
  
Pattern
 You can configure gamma corrections. The gamma patterns include: 
Binary (black and white) specified Normal, Soft, Sharp, Custom, Download
Grayscale/24-bit color specified Custom, Download
  
Custom Properties
 You can specify custom properties (Gamma, Brightness, Contrast, Shadow,\
 and Highlight) only when you select 
[Custom] as a Gamma pattern. Type in a numerical value in each box, clic\
k the forward/backward arrows, or drag 
the slider to increase/decrease the numerical value. Of those items, [Sh\
adow] and [Highlight] can be specified 
only when a Color or Grayscale setting is selected under [Mode].
   
[Color Dropout] Tab 
						

							
  
Color Dropout
 Any of three primary colors (red-green-blue) can be dropped out from d\
ocument images. For example, when 
scanning text in black with the red frame, selecting red color scans onl\
y text in black. 
This setting is available only when Black and White or Grayscale setting\
 is selected.
   
[Compression] Tab 
						

							
  
JPEG Quality
 You can specify compression levels and image quality for scanning in Col\
or or Grayscale mode.
   
Sample Ratio 
 You can specify one of the sample ratios, by which images are compressed\
, listed in the order of precedence from 
highest (listed first) to lowest as follows: YUV 4:4:4 < YUV 4:2:2 < Y\
UV 4:1:1. 
The higher the compression rate, the smaller the file size is, but the q\
uality of the scanned image is degraded.
   
[Imprinter] Tab
You can configure settings for using the imprinter option (to be purcha\
sed separately). This tab is not displayed unless the 
imprinter option is installed.  
						

							
  
[On] Checkbox
 Marking this checkbox enables the Imprinter function.
   
Format Template
 Characters typed in this box are printed on documents. You can enter the\
 following characters (up to 43 
characters):
 
Alphabet A to Z, a to z (single-width)
Numerics 0, 1 to 9 (single-width)
Symbols !  $ # % &  ( ) * + , - . / : ; < = > ? @ [ ] ^ _` { | } ~ (singl\
e-width)
Year/Month/Day %Y
Time (HH:MM) %T
Counter %S (Select from 3 to 8 as the number of digits.)
Other 
  
 ATTENTION 
To print characters # and %, you have to type in ## and %% respectively \
because these 
are special characters. Take note that typing in only one character (#)\
 displays the counter.
   
Date
 You can specify how to indicate the date format.
 
Format Type in the initial value.
Delimiter Select a delimiter, which is a character that identifies the beginning o\
r the end of a 
character string.
  
Counter 
						

							
 You can specify the rule to display the counter.
 
Initial Value Set the initial value of the counter.
Field Width Select the number of digits from 3 to 8.
Number Control Select the increment of the counter value.
  
Top Margin
 You can set the distance between the top of the page and the top of the \
first line printed on the page with a 
numeric.
 
Range 0.5 to 10.5 in. (1.27 to 26.7 cm)
Minimum unit 0.1 in. (0.01 cm)
  
Units
 You can specify the unit of the top margin; in inch, in cm, or in pixel.\
   
Font
 You can specify the font style from Normal, Bold, and Narrow for printin\
g characters.
   
Rotation
 You can specify the text direction for printing characters.
   
[About] Tab
On this tab, you can view the information about the ISIS driver and the \
scanner connected to your computer.
   
All Rights Reserved. Copyright 2007 © PFU LIMITED 
						

							
fi-6130 / fi-6230 Image Scanner Operators Guide
 
 
 
TROUBLESHOOTING 
CONTENTS MAP 
TOP    
 
 2.6 How to Use ScandAll PRO
 
 
 
 
ScandAll PRO is software for scanning images, which is in conformity wit\
h both TWAN/ISIS standards. Using the FUJITSU 
TWAIN 32 or FUJITSU ISIS scanner driver together with ScandAll PRO allow\
s you to create document images. 
The following explains how to scan documents with the scanner through Sc\
andAll PRO. 
   
 
HINT 
For information about the features of ScandAll PRO, refer to ScandAll PR\
O Help. 
   
 Launching ScandAll PRO
  
From the [Start] menu, select [All Programs]Õ[Fujitsu ScandAll PRO]Õ[Fujitsu ScandAll PRO].
 ScandAll PRO starts up.
 
  
Selecting a Scanner Driver
  
 
ScandAll PRO supports both TWAIN and ISIS standards and allows you to in\
voke either the TWAIN driver or the ISIS 
driver for scanning images with the scanner. This scanner comes with two\
 drivers, FUJITSU TWAIN 32 Scanner Driver 
and FUJITSU ISIS Scanner Driver, which you can use with this scanner. 
The following explains how to select a scanner driver with ScandAll PRO \
(how to switch between the FUJITSU TWAIN and 
ISIS scanner drivers). 
						

							
  
 
   HINT 
l     In ScandAll PRO, the default [Device Driver] is [TWAIN].
l     There is no functional difference between the FUJITSU TWAIN 32 and FUJIT\
SU ISIS 
scanner drivers. You can use one of them according to your preferences.
   
  1.  From the [Tool] menu, select [Preferences].
 
 The [Setup] dialog box appears.
 
 
  2.  On the [Scan] tab, under [Device Driver], select either of drivers. 
 
 To use FUJITSU TWAIN 32 Scanner Driver, select [TWAIN]. 
To use FUJITSU ISIS Scanner Driver, select [ISIS]. 
  
  
  3.  Click the [OK] button to close the [Setup] dialog box.
 
 
Selecting a Scanner
  
 To scan documents with a scanner, you have to select its name from the l\
ist beforehand. 
The following explains how to select a scanner to use. 
   
						

							
 1.  From the [Scan] menu, select [Select Scanner].
  
  0The [Select Scanner] dialog box appears.
  
  2.  Select a scanner you want to use.
 
 
When the driver is FUJITSU TWAIN 32, select [FUJITSU fi-6130dj] or [FUJI\
TSU fi-6230dj], and then click the 
[Select] button. 
When the driver is FUJITSU ISIS, select [Fujitsu fi-6130] or [Fujitsu fi\
-6230], and then click the [Select] button.
  
 0
 
 FUJITSU TWAIN 32  FUJITSU ISIS
  
How to Display the Scanner Driver Setup Dialog Box
  
 
 
You can configure settings for scanning documents with the selected scan\
ner in the setup dialog box of a scanner driver. 
Select the [Scan] menu, and then select [Setting] to display the setup d\
ialog box.