Fujitsu Fi6130 Operators Manual
Have a look at the manual Fujitsu Fi6130 Operators Manual online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 86 Fujitsu manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.
![Page 86
5. Select the [Job/Cache] tab.
6. Mark the [Blank Page Skip] checkbox.
If this checkbox is marked, cache mode is automatically changed to [Ram \
cache].
7. With the slider control under [Blank Page Skip], specify the Blank Page \
Skip degree.
For white pages, use the [Black Dots Ratio] slider bar to specify a degr\
ee of accuracy needed to skip blank pages. For
black pages, use the [White Dots Ratio] scroll bar to specify a degree o\
f accuracy needed to skip blank pages. The
value...](http://img.usermanuals.tech/thumb/26/59946/w64_fujitsu-fi6130-operators-manual-1488462901_d-85.png "Page 86
5. Select the [Job/Cache] tab.
6. Mark the [Blank Page Skip] checkbox.
If this checkbox is marked, cache mode is automatically changed to [Ram \
cache].
7. With the slider control under [Blank Page Skip], specify the Blank Page \
Skip degree.
For white pages, use the [Black Dots Ratio] slider bar to specify a degr\
ee of accuracy needed to skip blank pages. For
black pages, use the [White Dots Ratio] scroll bar to specify a degree o\
f accuracy needed to skip blank pages. The
value...")
![Page 87
You are returned to the [TWAIN Driver] dialog box.
9. In the [TWAIN Driver] dialog box, click the [OK] button.
Changes made are saved and the [TWAIN Driver] dialog box closes.
10. From the ScandAll PRO window, perform a scan.
For information about how to scan documents, see Section 2.6 How to Use ScandAll PRO.
Scanned document images are displayed in the ScandAll PRO window.
All Rights Reserved. Copyright 2007 © PFU LIMITED](http://img.usermanuals.tech/thumb/26/59946/w64_fujitsu-fi6130-operators-manual-1488462901_d-86.png "Page 87
You are returned to the [TWAIN Driver] dialog box.
9. In the [TWAIN Driver] dialog box, click the [OK] button.
Changes made are saved and the [TWAIN Driver] dialog box closes.
10. From the ScandAll PRO window, perform a scan.
For information about how to scan documents, see Section 2.6 How to Use ScandAll PRO.
Scanned document images are displayed in the ScandAll PRO window.
All Rights Reserved. Copyright 2007 © PFU LIMITED")
![Page 88
fi-6130 / fi-6230 Image Scanner Operators Guide
TROUBLESHOOTING
CONTENTS MAP
TOP
3.9 Detecting Multifeeds
Multifeed is a feeding error that occurs when two or more sheets in th\
e ADF paper chute are fed simultaneously into the scanner.
You can set the scanner to detect multifeed, stop scanner operation, and\
display an error message.
To set the scanner to detect multifeed, change the settings in the [TWAI\
N Driver] dialog box or in the Software Operation Panel.
For how to...](http://img.usermanuals.tech/thumb/26/59946/w64_fujitsu-fi6130-operators-manual-1488462901_d-87.png "Page 88
fi-6130 / fi-6230 Image Scanner Operators Guide
TROUBLESHOOTING
CONTENTS MAP
TOP
3.9 Detecting Multifeeds
Multifeed is a feeding error that occurs when two or more sheets in th\
e ADF paper chute are fed simultaneously into the scanner.
You can set the scanner to detect multifeed, stop scanner operation, and\
display an error message.
To set the scanner to detect multifeed, change the settings in the [TWAI\
N Driver] dialog box or in the Software Operation Panel.
For how to...")
![Page 89
6. Select how to detect multifeeds from the [Multifeed Detection] drop-down\
list under [ADF Option].
The following are how to detect multifeeds:
None Multifeed detection is not performed.
Check overlapping The scanner monitors the thickness of fed documents. The scanner detects\
a
multifeed based on an increased thickness when multiple sheets are fed
simultaneously.
Check length The scanner monitors the length of fed documents. The scanner detects a \
multifeed
based on an increased...](http://img.usermanuals.tech/thumb/26/59946/w64_fujitsu-fi6130-operators-manual-1488462901_d-88.png "Page 89
6. Select how to detect multifeeds from the [Multifeed Detection] drop-down\
list under [ADF Option].
The following are how to detect multifeeds:
None Multifeed detection is not performed.
Check overlapping The scanner monitors the thickness of fed documents. The scanner detects\
a
multifeed based on an increased thickness when multiple sheets are fed
simultaneously.
Check length The scanner monitors the length of fed documents. The scanner detects a \
multifeed
based on an increased...")
![Page 90
fi-6130 / fi-6230 Image Scanner Operators Guide
TROUBLESHOOTING
CONTENTS MAP
TOP
3.10 Correcting Skewed Documents
The skew of documents can be detected and corrected automatically by ena\
bling the Automatic Deskew function.
Change the setting in the setup dialog box of the scanner driver.
The following shows the procedure to change settings in the setup dialog\
box of the FUJITSU TWAIN 32 Scanner Driver.
1. Place the document on the ADF paper chute.
For details on how to place...](http://img.usermanuals.tech/thumb/26/59946/w64_fujitsu-fi6130-operators-manual-1488462901_d-89.png "Page 90
fi-6130 / fi-6230 Image Scanner Operators Guide
TROUBLESHOOTING
CONTENTS MAP
TOP
3.10 Correcting Skewed Documents
The skew of documents can be detected and corrected automatically by ena\
bling the Automatic Deskew function.
Change the setting in the setup dialog box of the scanner driver.
The following shows the procedure to change settings in the setup dialog\
box of the FUJITSU TWAIN 32 Scanner Driver.
1. Place the document on the ADF paper chute.
For details on how to place...")
![Page 91
6. Select [Automatic Page Size Detection] from the [Automatic Size and Skew\
detection] drop-down list.
HINT
With the [Priority] slider control, you can change the accuracy of Autom\
atic Page Size
Detection.
Move the slider to right to improve the detection accuracy. Note that th\
e higher the
accuracy, the longer the processing time, and the scanning speed becomes\
slower.
When detecting paper sizes of index sheets or documents to which sticky \
notes or index
tabs are attached, set...](http://img.usermanuals.tech/thumb/26/59946/w64_fujitsu-fi6130-operators-manual-1488462901_d-90.png "Page 91
6. Select [Automatic Page Size Detection] from the [Automatic Size and Skew\
detection] drop-down list.
HINT
With the [Priority] slider control, you can change the accuracy of Autom\
atic Page Size
Detection.
Move the slider to right to improve the detection accuracy. Note that th\
e higher the
accuracy, the longer the processing time, and the scanning speed becomes\
slower.
When detecting paper sizes of index sheets or documents to which sticky \
notes or index
tabs are attached, set...")
![Page 92
ATTENTION
If one of the following conditions is met, the Automatic Page Size Detec\
tion may not work
properly.
l Paper is 52g/m2 or less in weight
l Documents are not rectangular
l The margin of pages is filled with dark color
7. Click the [OK] button.
You are returned to the [TWAIN Driver] dialog box.
8. In the [TWAIN Driver] dialog box, click the [OK] button.
Changes made are saved and the [TWAIN Driver] dialog box closes.
9. From the ScandAll PRO window, perform a scan....](http://img.usermanuals.tech/thumb/26/59946/w64_fujitsu-fi6130-operators-manual-1488462901_d-91.png "Page 92
ATTENTION
If one of the following conditions is met, the Automatic Page Size Detec\
tion may not work
properly.
l Paper is 52g/m2 or less in weight
l Documents are not rectangular
l The margin of pages is filled with dark color
7. Click the [OK] button.
You are returned to the [TWAIN Driver] dialog box.
8. In the [TWAIN Driver] dialog box, click the [OK] button.
Changes made are saved and the [TWAIN Driver] dialog box closes.
9. From the ScandAll PRO window, perform a scan....")
![Page 93
fi-6130 / fi-6230 Image Scanner Operators Guide
TROUBLESHOOTING
CONTENTS MAP
TOP
3.11 Outputting Multi-Images
You can obtain both color/grayscale and black-and-white images at a scan\
(Multi Image Output).
* Depending on the application to use, this function may not work proper\
ly.
Configure Multi Image settings using the scanner driver.
Original000000000000000000Created image
Example: When the color document is scanned with Multi Image Output bein\
g set
The following shows...](http://img.usermanuals.tech/thumb/26/59946/w64_fujitsu-fi6130-operators-manual-1488462901_d-92.png "Page 93
fi-6130 / fi-6230 Image Scanner Operators Guide
TROUBLESHOOTING
CONTENTS MAP
TOP
3.11 Outputting Multi-Images
You can obtain both color/grayscale and black-and-white images at a scan\
(Multi Image Output).
* Depending on the application to use, this function may not work proper\
ly.
Configure Multi Image settings using the scanner driver.
Original000000000000000000Created image
Example: When the color document is scanned with Multi Image Output bein\
g set
The following shows...")
![Page 94
The [Multi Image] dialog box appears.
5. Select [Multi Image Output] under [Output mode].](http://img.usermanuals.tech/thumb/26/59946/w64_fujitsu-fi6130-operators-manual-1488462901_d-93.png "Page 94
The [Multi Image] dialog box appears.
5. Select [Multi Image Output] under [Output mode].")
![Page 95
6. Select the order to output multi-images under [Order (for Multi Image O\
utput)].
Primary: Color/Grayscale - Secondary: Binary
First, a Color or Grayscale image is output, and then a Black-and-White \
image.
Primary: Binary - Secondary: Color/Grayscale
First, a Black-and-White image is output, and then a Color or Grayscale \
image.
7. Under [Select Current Image Setting], select a side, and then configure \
settings for each side in the [TWAIN Driver] dialog box.
8. In the...](http://img.usermanuals.tech/thumb/26/59946/w64_fujitsu-fi6130-operators-manual-1488462901_d-94.png "Page 95
6. Select the order to output multi-images under [Order (for Multi Image O\
utput)].
Primary: Color/Grayscale - Secondary: Binary
First, a Color or Grayscale image is output, and then a Black-and-White \
image.
Primary: Binary - Secondary: Color/Grayscale
First, a Black-and-White image is output, and then a Color or Grayscale \
image.
7. Under [Select Current Image Setting], select a side, and then configure \
settings for each side in the [TWAIN Driver] dialog box.
8. In the...")
![Page 96
fi-6130 / fi-6230 Image Scanner Operators Guide
TROUBLESHOOTING
CONTENTS MAP
TOP
3.12 Color/Monochrome Auto Detection
This scanner features automatic detection of color or black-and-white do\
cument scans (the term scan, in this case, refers to a
produced image by scanning).
Scanning color documents produces color (or grayscale) images, and sca\
nning black-and-white documents produces black-and-
white images.
* Depending on the application to use, this function may not work...](http://img.usermanuals.tech/thumb/26/59946/w64_fujitsu-fi6130-operators-manual-1488462901_d-95.png "Page 96
fi-6130 / fi-6230 Image Scanner Operators Guide
TROUBLESHOOTING
CONTENTS MAP
TOP
3.12 Color/Monochrome Auto Detection
This scanner features automatic detection of color or black-and-white do\
cument scans (the term scan, in this case, refers to a
produced image by scanning).
Scanning color documents produces color (or grayscale) images, and sca\
nning black-and-white documents produces black-and-
white images.
* Depending on the application to use, this function may not work...")
6. Select [Automatic Page Size Detection] from the [Automatic Size and Skew\ detection] drop-down list. HINT With the [Priority] slider control, you can change the accuracy of Autom\ atic Page Size Detection. Move the slider to right to improve the detection accuracy. Note that th\ e higher the accuracy, the longer the processing time, and the scanning speed becomes\ slower. When detecting paper sizes of index sheets or documents to which sticky \ notes or index tabs are attached, set the Priority to 2. When detecting paper sizes of sheets or documents whose one sides backg\ round is in dark color, set the Priority to 3. Priority Document type suited for scanning 0 Document whose sides linearity is high 1 Index sheet or document to which sticky notes or index tabs are attached\ 2 Index sheet or document to which sticky notes or index tabs are note attached 3 Document with one side in dark background color
ATTENTION
If one of the following conditions is met, the Automatic Page Size Detec\
tion may not work
properly.
l Paper is 52g/m2 or less in weight
l Documents are not rectangular
l The margin of pages is filled with dark color
7. Click the [OK] button.
You are returned to the [TWAIN Driver] dialog box.
8. In the [TWAIN Driver] dialog box, click the [OK] button.
Changes made are saved and the [TWAIN Driver] dialog box closes.
9. From the ScandAll PRO window, perform a scan.
For information about how to scan documents, see Section 2.6 How to Use ScandAll PRO.
Scanned document images are displayed in the ScandAll PRO window.
All Rights Reserved. Copyright 2007 © PFU LIMITED
fi-6130 / fi-6230 Image Scanner Operators Guide TROUBLESHOOTING CONTENTS MAP TOP 3.11 Outputting Multi-Images You can obtain both color/grayscale and black-and-white images at a scan\ (Multi Image Output). * Depending on the application to use, this function may not work proper\ ly. Configure Multi Image settings using the scanner driver. Original000000000000000000Created image Example: When the color document is scanned with Multi Image Output bein\ g set The following shows the procedure to change settings in the setup dialog\ box of the FUJITSU TWAIN 32 Scanner Driver. 1. Place the document on the scanner. For how to load documents on the ADF paper chute, see Section 2.2 Loading Documents on the ADF for Scanning. For how to load documents on the Flatbed, see Section 2.3 Loading Documents on the Flatbed for Scanning [fi-6230 only]. 2. Launch ScandAll PRO. From the [Start] menu, select [All Programs] Õ [Fujitsu ScandAll PRO] Õ [Fujitsu ScandAll PRO] in the order presented. Then, ScandAll PRO starts up. 3. From ScandAll PRO, display the setup dialog box of FUJITSU TWAIN 32. For information about how to display the scanner drivers setup dialog b\ ox, see Section 2.6 How to Use ScandAll PRO. 4. In the [TWAIN Driver] dialog box, mark the [Enable Multi Image] checkbox\ .
The [Multi Image] dialog box appears. 5. Select [Multi Image Output] under [Output mode].
6. Select the order to output multi-images under [Order (for Multi Image O\ utput)]. Primary: Color/Grayscale - Secondary: Binary First, a Color or Grayscale image is output, and then a Black-and-White \ image. Primary: Binary - Secondary: Color/Grayscale First, a Black-and-White image is output, and then a Color or Grayscale \ image. 7. Under [Select Current Image Setting], select a side, and then configure \ settings for each side in the [TWAIN Driver] dialog box. 8. In the [TWAIN Driver] dialog box, click the [OK] button. Changes made are saved and the [TWAIN Driver] dialog box closes. 9. From the ScandAll PRO window, perform a scan. For information about how to scan documents, see Section 2.6 How to Use ScandAll PRO. Scanned document images are displayed in the ScandAll PRO window. All Rights Reserved. Copyright 2007 © PFU LIMITED
fi-6130 / fi-6230 Image Scanner Operators Guide TROUBLESHOOTING CONTENTS MAP TOP 3.12 Color/Monochrome Auto Detection This scanner features automatic detection of color or black-and-white do\ cument scans (the term scan, in this case, refers to a produced image by scanning). Scanning color documents produces color (or grayscale) images, and sca\ nning black-and-white documents produces black-and- white images. * Depending on the application to use, this function may not work proper\ ly. Configure Multi Image settings using the scanner driver. The following shows the procedure to change settings in the setup dialog\ box of the FUJITSU TWAIN 32 Scanner Driver. 1. Place the document on the scanner. For how to load documents on the ADF paper chute, see Section 2.2 Loading Documents on the ADF for Scanning. For how to load documents on the Flatbed, see Section 2.3 Loading Documents on the Flatbed for Scanning [fi-6230 only]. 2. Launch ScandAll PRO. From the [Start] menu, select [All Programs] Õ [Fujitsu ScandAll PRO] Õ [Fujitsu ScandAll PRO] in the order presented. Then, ScandAll PRO starts up. 3. From ScandAll PRO, display the setup dialog box of FUJITSU TWAIN 32. For information about how to display the scanner drivers setup dialog b\ ox, see Section 2.6 How to Use ScandAll PRO. 4. In the [TWAIN Driver] dialog box, mark the [Enable Multi Image] checkbox\ .
The [Multi Image] dialog box appears. 5. Select [Auto Color Detection] under [Output mode].
6. Under [Select Current Image Setting], select a side, and then configure \
settings for each side in the [TWAIN Driver] dialog box.
You need to configure both of the settings for [Color/Grayscale] detecti\
on and for [Binary] detection in advance.
7. In the [TWAIN Driver] dialog box, click the [OK] button.
Changes made are saved and the [TWAIN Driver] dialog box closes.
8. From the ScandAll PRO window, perform a scan.
For information about how to scan documents, see Section 2.6 How to Use ScandAll PRO.
Scanned document images are displayed in the ScandAll PRO window.
All Rights Reserved. Copyright 2007 © PFU LIMITED
fi-6130 / fi-6230 Image Scanner Operators Guide TROUBLESHOOTING CONTENTS MAP TOP 3.13 Splitting a Page in Two Pages You can obtain two images by horizontally splitting a scanned page image\ . * Depending on the application to use, this function may not work proper\ ly. Enable the Split Image function in the setup dialog box of the scanner d\ river. Original000000000Created image The following shows the procedure to change settings in the setup dialog\ box of the FUJITSU TWAIN 32 Scanner Driver. 1. Place the document on the scanner. For how to load documents on the ADF paper chute, see Section 2.2 Loading Documents on the ADF for Scanning. For how to load documents on the Flatbed, see Section 2.3 Loading Documents on the Flatbed for Scanning [fi-6230 only]. 2. Launch ScandAll PRO. From the [Start] menu, select [All Programs] Õ [Fujitsu ScandAll PRO] Õ [Fujitsu ScandAll PRO] in the order presented. Then, ScandAll PRO starts up. 3. From ScandAll PRO, display the setup dialog box of FUJITSU TWAIN 32. For information about how to display the scanner drivers setup dialog b\ ox, see Section 2.6 How to Use ScandAll PRO. 4. In the [TWAIN Driver] dialog box, click the [Option] button.
The [Option] dialog box appears. 5. Select the [Rotation] tab. 6. Mark the [Split Image] checkbox.