DELL 2155cdn User Manual
Have a look at the manual DELL 2155cdn User Manual online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 327 Dell manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.
Understanding the Printer Menus499 Country Purpose: To select the country where the printer is used. Va l u e s : Fax Activity Purpose: 4.8 Kbps 9.6 Kbps 14.4 Kbps 33.6 Kbps * Algeria Hungary Puerto Rico Australia Iceland Romania Austria Ireland Russia Belgium Italy Saudi Arabia Bulgaria Jamaica Slovakia Canada Jordan Slovenia Colombia Latvia South Africa Costa Rica Liechtenstein Spain Cyprus Lithuania Sweden Czech Republic Luxembourg Switzerland Denmark Malta Tunisia Dominican Republic Mexico Turkey Egypt Netherlands U.A.E. Estonia New Zealand United Kingdom Finland Nicaragua United States France Norway Unknown * Germany Panama Greece Poland Guatemala Portugal
500Understanding the Printer Menus To set whether to automatically print a fax activity report after every 50 incoming and outgoing fax communications. Va l u e s : Fax Transmit Purpose: To set whether to print a transmission result after a fax transmission. Va l u e s : Fax Broadcast Purpose: To set whether to print a transmission result after a fax transmission to multiple destinations. Va l u e s : Fax Protocol Purpose: To set whether to print the protocol monitor report, which helps you identify the cause of a communication problem. Values: Auto Print*Automatically prints a fax activity report after every 50 incoming and outgoing fax communications. No Auto PrintDoes not automatically print a fax activity report after every 50 incoming and outgoing fax communications. Print AlwaysPrints a transmission report after every fax transmission. Print On Error *Prints a transmission report only when an error occurs. Print DisableDoes not print a transmission report after a fax transmission. Print Always *Prints a transmission report after every fax transmission. Print On ErrorPrints a transmission report only when an error occurs. Print DisableDoes not print a transmission report after a fax transmission to multiple destinations.
Understanding the Printer Menus501 System Settings Use System Settings to configure the power saving mode, warning tones, time-out duration, device display language, and job log auto print settings. NOTE: Values marked by an asterisk (*) are the factory default menu settings. Power Saver Timer Purpose: To specify the time for transition to power saver mode. Va l u e s : Enter 3 to put the printer in power saver mode 3 minutes after it finishes a job. This uses much less energy, but requires more warm-up time for the printer. Enter 3 if your printer shares an electrical circuit with room lighting and you notice lights flickering. Select a high value if your printer is in constant use. In most circumstances, this keeps the printer ready to operate with minimum warm-up time. Select a value between 1 and 30 minutes for power save mode if you want a balance between energy consumption and a shorter warm-up period. The printer automatically returns to the standby mode from the power saver mode when it receives data from the computer or remote fax machine. You can also change the status of the printer to the standby mode by pressing any button on the operator panel. Print AlwaysPrints a protocol monitor report after every fax transmission. Print On ErrorPrints the protocol monitor report only when an error occurs. Print Disable *Does not print the protocol monitor report. Sleep 3min *Specifies the time taken by the printer to enter Sleep mode after it finishes a job. 1–30 min. Deep Sleep 10min *Specifies the time taken by the printer to enter Deep Sleep mode after it has entered Sleep mode. 5–60 min.
502Understanding the Printer Menus Power Saver Wake Up Purpose: To specify whether to wake up from the Sleep or Deep Sleep mode when OnHook is set to Off. Va l u e s : Auto Reset Purpose: To automatically reset the settings for COPY, SCAN, or FAX to the default settings and return to the standby mode after you do not specify any settings for the specified time. Va l u e s : Fault Time-out Purpose: To specify the amount of time the printer waits before canceling a job that stops abnormally. The print job is cancelled if the time-out time is exceeded. Va l u e s : OffHook Wake Up Off*Does not wake up from the Sleep or Deep Sleep mode when OnHook is set to Off. OnWakes up from the Sleep or Deep Sleep mode when OnHook is set to Off. 45sec * 1min 2min 3min 4min OffDisables the fault time-out. On *60sec*Sets the amount of time the printer waits before canceling a job that stops abnormally. 3-300 sec.
Understanding the Printer Menus503 Job Time-out Purpose: To specify the amount of time the printer waits for data to arrive from the computer. The print job is cancelled if the time-out time is exceeded. Va l u e s : Date & Time Purpose: To specify the date and time formats. Va l u e s : Audio Tone Purpose: To configure settings for tones emitted by the printer during operation or when a warning message appears. Va l u e s : OffDisables the job time-out. On *30sec*Sets the time the printer waits for data to arrive from the computer. 5–300 sec. Set Date & TimeTime ZoneSets the time zone. Set DateSets the date depending on the Date Format settings. Set TimeSets the time. Date FormatSets the date format. Time Format 12HSets the time in 12-hour format. 24H *Sets the time in 24-hour format.
504Understanding the Printer Menus Control Panel Off* Does not emit a tone when the operator panel input is correct. SoftEmits a tone when the operator panel input is correct. Normal Loud Invalid Key Off *Does not emit a tone when the operator panel input is incorrect. SoftEmits a tone when the operator panel input is incorrect. Normal Loud Machine Ready Off Does not emit a tone when the printer is ready to process a job. SoftEmits a tone when the printer is ready to process a job. Normal * Loud Copy Completed Off Does not emit a tone when a copy job is complete. SoftEmits a tone when a copy job is complete. Normal * Loud Job Completed Off Does not emit a tone when a job other than a copy job is complete. SoftEmits a tone when a job other than a copy job is complete. Normal * Loud Fault Tone Off Does not emit a tone when a job ends abnormally. SoftEmits a tone when a job ends abnormally. Normal * Loud
Understanding the Printer Menus505 mm / inch Purpose: To specify the default measurement unit displayed after the numeric value on the operator panel. Alert Tone Off Does not emit a tone when a problem occurs. SoftEmits a tone when a problem occurs. Normal * Loud Out of Paper Off Does not emit a tone when the printer runs out of paper. SoftEmits a tone when the printer runs out of paper. Normal * Loud Low Toner Alert Off Does not emit a tone when a toner is low. SoftEmits a tone when a toner is low. Normal * Loud Auto Clear Alert Off *Does not emit a tone 5 seconds before the printer performs auto clear. SoftEmits a tone 5 seconds before the printer performs auto clear. Normal Loud Base Tone Off *Does not emit a tone when the operator panel display is returned to the default setting by scrolling the loop menu. SoftEmits a tone when the operator panel display is returned to the default setting by scrolling the loop menu. Normal Loud All Tones SoftSets the volume of all the alert tones at once. Normal * Loud OffDisables all the alert tones.