DELL 2155cdn User Manual
Have a look at the manual DELL 2155cdn User Manual online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 327 Dell manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.
Understanding the Printer Menus479 Draft Mode Purpose: To save toner by printing in the draft mode. The print quality is reduced when printing in the draft mode. Va l u e s : LineTermination Purpose: To add the line termination commands. Va l u e s : Default Color Purpose: To specify the color mode to Color or Black. This setting is used for a print job that does not specify a print mode. Va l u e s : EnableEnables the Hex Dump feature. Disable *Does not print in the draft mode. EnablePrints in the draft mode. Off *The line termination command is not added. CR=CR, LF=LF, FF=FF Add-LFThe LF command is added. CR=CR-LF, LF=LF, FF=FF Add-CRThe CR command is added. CR=CR, LF=CR-LF, FF=CR-FF CR-XXThe CR and LF commands are added. CR=CR-LF, LF=CR-LF, FF=CR-FF Black *Prints in the black and white mode.
480Understanding the Printer Menus PDF Use the PDF menu to change printer settings that only affect the PDF jobs. NOTE: Values marked by an asterisk (*) are the factory default menu settings. Quantity Purpose: To specify the number of copies to print. Va l u e s : 2 Sided Print NOTE: 2 Sided Print feature is available only for Dell 2155cdn Multifunction Color Printer. Purpose: To specify whether to print on both sides of a sheet of paper. Va l u e : Print Mode Purpose: To specify the print mode. Va l u e : ColorPrints in the color mode. 1 *Sets the value in increments of 1. 1–999 1 Sided *Prints on one side of a sheet of paper. Long Edge FlipPrints on both sides of a sheet of paper to be bound by long edge. Short Edge FlipPrints on both sides of a sheet of paper to be bound by short edge. Normal *For documents with normal sized characters. High QualityFor documents with small characters or thin lines, or documents printed using a dot-matrix printer.
Understanding the Printer Menus481 PDF Password Purpose: To specify the password to print the secure PDF. Va l u e : Collated Purpose: To specify whether to sort the job. Va l u e : Output Size Purpose: To specify the output paper size for PDF. Va l u e : Layout Purpose: To specify the output layout. Va l u e : High SpeedPrints with the higher speed than the Normal mode, but the quality is less. Enter PDF PasswordEnter the password to print the secure PDF. Off *Does not sort the job. OnSorts the job. A4 *1 Letter*1 Auto *1The default paper size is displayed.
482Understanding the Printer Menus Output Color Purpose: To specify the output color. Va l u e : Network Use the Network menu to change the printer settings affecting jobs sent to the printer through the wired or wireless network. NOTE: Values marked by an asterisk (*) are the factory default menu settings. Ethernet Purpose: To specify the communication speed and the duplex settings of Ethernet. The change becomes effective after the printer is turned off and then on again. Va l u e s : Auto %* 100% (No Zoom) Booklet 2 Pages Up 4 Pages Up Color (Auto) * Black & White Auto *Detects the Ethernet settings automatically. 10BASE- T HalfUses 10BASE-T Half-duplex. 10BASE- T FullUses 10BASE-T Full-duplex. 100BASE- TX HalfUses 100BASE-TX Half-duplex. 100BASE- TX FullUses 100BASE-TX Full-duplex. 1000BASE- T FullUses 1000BASE-T Full-duplex.
Understanding the Printer Menus483 Wireless Status NOTE: Wireless Status feature is available only when the printer is connected using the wireless network. Purpose: To confirm the wireless communication status. Va l u e s : Wireless Setup NOTE: Wireless Setup is available only when the printer is connected using the wireless network. Purpose: To configure the wireless network interface. Va l u e s : Connection Good Acceptable Low No Reception SSIDDisplays the name that identifies the wireless network. Encryption TypeDisplays the encryption type.
484Understanding the Printer Menus Manual SetupEnter Network (SSID)Specifies a name to identify the wireless network. Up to 32 alphanumeric characters can be entered. Infra- structureSelect when you configure the wireless setting through the access point such as a wireless router. No SecuritySpecifies No Security to configure the wireless setting without specifying a security method from WEP, WPA-PSK- TKIP, and WPA-PSK-AES. WEP(64Bit)Specifies the WEP 64bit key to use through the wireless network. Up to 10 hexadecimal characters can be entered. Transmit KeySpecifies the transmit key from WEP Key 1, WEP Key 2, WEP Key 3, and WEP Key 4. WEP(128Bit)Specifies the WEP 128bit key to use through the wireless network. Up to 26 hexadecimal characters can be entered. Transmit KeySpecifies the transmit key from WEP Key 1, WEP Key 2, WEP Key 3, and WEP Key 4. WPA-PSK- TKIPSelect to configure the wireless setting with the security method of WPA-PSK-TKIP. Pass PhraseSpecifies the passphrase of alphanumeric characters from 8 to 63 only when WPA-PSK- TKIP is selected for Encryption. WPA2-PSK- AESSelect to configure the wireless setting with the security method of WPA2-PSK-AES. Pass PhraseSpecifies the passphrase of alphanumeric characters from 8 to 63 only when WPA-PSK- AES is selected for Encryption.
Understanding the Printer Menus485 Reset Wireless NOTE: Reset Wireless feature is available only when the printer is connected using the wireless network. Purpose: To initialize wireless network settings. After executing this function and rebooting the printer, all wireless network settings are reset to their default values. Ad-hocSelect to configure the wireless setting without the access point such as a wireless router. No SecuritySelect to configure the wireless setting without specifying the security method from WEP. WEP(64Bit)Specifies the WEP 64bit key to use through the wireless network. Up to 10 hexadecimal characters can be entered. Transmit KeySpecifies the transmit key from WEP Key 1, WEP Key 2, WEP Key 3, and WEP Key 4. WEP(128Bit)Specifies the WEP 128bit key to use through the wireless network. Up to 26 hexadecimal characters can be entered. Transmit KeySpecifies the transmit key from WEP Key 1, WEP Key 2, WEP Key 3, and WEP Key 4. WPS Push Button ControlPBC Start Cancel *Disables the security method of WPS-PBC. Start Configures the wireless setting with the security method of WPS-PBC. PIN CodeStar t Configuration * Configures the wireless setting using the PIN code assigned automatically by the printer. Print PIN CodePrints the PIN code. Confirm it when entering PIN assigned to the printer into your computer.
486Understanding the Printer Menus Va l u e s : TCP/IP Purpose: To configure TCP/IP settings. Va l u e s : Cancel*Does not reset the wireless setting. StartResets the wireless setting. IP Mode Dual Stack *Uses both IPv4 and IPv6 to set the IP address. IPv4 ModeUses IPv4 to set the IP address. IPv6 ModeUses IPv6 to set the IP address.
Understanding the Printer Menus487 Protocol Purpose: To enable or disable each protocol. The change becomes effective after the printer is turned off and then on again. Va l u e s : IPv4 Get IP Address Auto IP*Sets the IP address automatically. A random value in the range of 169.254.1.0 to 169.254.254.255 that is not currently in use on the network is set as the IP address. The subnet mask is set as 255.255.0.0. BOOTPSets the IP address using BOOTP. RARPSets the IP address using RARP. DHCPSets the IP address using DHCP. PanelUse this option when you want to set the IP address manually on the operator panel. IP AddressWhen an IP address is being set manually, the IP is allocated to the printer using the format nnn.nnn.nnn.nnn. Each octet that makes up nnn.nnn.nnn.nnn is a value in the range of 0 to 254. 127 and any value in the range of 224 to 254 cannot be specified for the first octet of a gateway address. Subnet MaskWhen an IP address is being set manually, the subnet mask is specified using the format nnn.nnn.nnn.nnn. Each octet that makes up nnn.nnn.nnn.nnn is a value in the range of 0 to 255. 255.255.255.255 cannot be specified as the subnet mask. Gateway AddressWhen an IP address is being set manually, the gateway address is specified using the format nnn.nnn.nnn.nnn. Each octet that makes up nnn.nnn.nnn.nnn is a value in the range of 0 to 254. 127 and any value in the range of 224 to 254 cannot be specified for the first octet of a gateway address. IPsec Disable *Disables IPsec.
488Understanding the Printer Menus LPD DisableDisables the LPD port. Enable *Enables the Line Printer Daemon (LPD) port. Port9100 DisableDisables the Port9100 port. Enable *Enables the Port9100 port. IPP DisableDisables IPP port. Enable *Enables IPP port. SMB TCP/IP DisableDisables SMB TCP/IP port. Enable *Enables SMB TCP/IP port. SMB NetBEUI DisableDisables SMB Net BEUI port. Enable *Enables SMB Net BEUI port. WSD DisableDisables WSD port. Enable *Enables WSD port. Network TWAIN DisableDisables Network TWAIN. Enable *Enables Network TWAIN. SNMP UDP DisableDisables the SNMP UDP port. Enable *Enables the Simple Network Management Protocol (SNMP) UDP port. E-Mail Alert DisableDisables the E-Mail Alert feature. Enable *Enables the E-Mail Alert feature. EWS DisableDisables an access to Dell Printer Configuration Web Tool embedded in the printer. Enable *Enables an access to Dell Printer Configuration Web Tool embedded in the printer. Bonjour(mDNS) DisableDisables Bonjour (mDNS). Enable *Enables Bonjour (mDNS). Te l n e t D i s a b l eDisables Telnet. Enable *Enables Telnet. Update Addr Book DisableDisables Update Address Book. Enable *Enables Update Address Book. LLTD DisableDisables LLTD. Enable *Enables LLTD.