DELL 2155cdn User Manual

							Dell Printer Configuration Web Tool219
SMB Port StatusDisplays the port status.
Host NameDisplays the host name.
WorkgroupDisplays the workgroup.
Maximum 
SessionsDisplays the maximum number of sessions.
Unicode 
SupportDisplays whether to notify the host name and 
workgroup name in Unicode characters during 
SMB transmission.
Auto Master 
ModeDisplays whether to enable the Auto Master Mode.
Encrypt 
PasswordDisplays whether to encrypt the password during 
SMB transmission.
Job Time-OutDisplays the job time-out period.
Connection 
Time-OutDisplays the connection time-out period.
Bonjour 
(mDNS)Port StatusDisplays the port status.
Host NameDisplays the host name.
Printer NameDisplays the printer name.
Te l n e t P o r t  St a t u sDisplays the port status.
Connection 
Time-OutDisplays the connection time-out period.
SNMP Port StatusDisplays the port status.
Enable SNMP 
v1/v2c ProtocolDisplays the status of the SNMP v1/v2c feature.
Enable SNMP 
v3 ProtocolDisplays the status of the SNMP v3 feature.
Update 
Address BookPort StatusDisplays the port status.
Connection 
Time-OutDisplays the connection time-out period.
LLTD Port StatusDisplays the port status.
FTP Client Connection 
Time-OutDisplays the connection time-out period.
FTP PassiveDisplays whether to enable the FTP Passive mode.
 
						

							220Dell Printer Configuration Web Tool
E-Mail Alert Setup Page
Purpose:
To verify the current settings of SMTP/POP (Simple Mail Transfer 
Protocol/Post Office Protocol) used for the e-mail feature and E-Mail Alerts 
feature. In this page, you can only verify the settings of items. If you want to 
change the settings, go to the pages in the Print Server Settings tab.
Va l u e s :
SMB Client Connection 
Time-OutDisplays the connection time-out period.
SSL/TLS HTTP - 
SSL/TLS 
CommunicationDisplays the status of the HTTP - SSL/TLS 
Communication.
HTTP - 
SSL/TLS 
Communication 
Port NumberDisplays HTTP - SSL/TLS Communication Port 
Number. 
IPsec Settings ProtocolDisplays the protocol status.
IKEDisplays IKE authentication.
802.1x
*1Enable IEEE 
802.1xDisplays the status of IEEE 802.1x.
Authentication 
MethodDisplays the setting of authentication method for 
IEEE 802.1x.
IP Filter 
(IPv4)
*8Access ListDisplays the list of IP addresses that are permitted 
or denied access to the printer.
*1This item is available only when the printer is connected using LAN cable.*2This item is available only when the printer is connected using the wireless network*3This item is displayed when IPv4 Mode is selected.*4This item is displayed when IPv6 Mode is selected.*5This item is displayed only when Use Manual Address is set to Enable.*6This item is displayed only when an IP address has been assigned.*7This item is available only when using IPv6 dual mode.*8This item is available only for LPD or Port9100.
 
						

							Dell Printer Configuration Web Tool221
E-Mail Server 
SettingsPort StatusDisplays the port status.
Primary SMTP 
GatewayDisplays the primary SMTP (Simple Mail Transfer 
Protocol) gateway.
SMTP Port 
NumberDisplays the SMTP port number.
E-Mail Send 
AuthenticationDisplays the authentication method for outgoing e-
mail.
POP3 Server 
AddressDisplays the POP3 (Post Office Protocol 3) server 
address.
POP3 Port 
NumberDisplays the POP3 port number.
Reply AddressDisplays the IP address of servers connected with 
SMTP protocol when data is incoming.
SMTP Server 
ConnectionDisplays the status of the SMTP server connection.
E-Mail Alert 
SettingsE-Mail List 1Displays the acceptable e-mail 
addresses for the E-Mail Alert 
feature specified in E-Mail List 
1.
Select Alerts 
for List 1Supplies AlertsDisplays the e-mail alert receive 
status for consumables.
Paper Handling 
AlertsDisplays the e-mail alert receive 
status for paper handling.
Service CallDisplays the e-mail alert receive 
status for service calls.
E-Mail List 2Displays the acceptable e-mail 
addresses for the E-Mail Alert 
feature specified in E-Mail List 
2.
Select Alerts 
for List 2Supplies AlertsDisplays the e-mail alert receive 
status for consumables.
Paper Handling 
AlertsDisplays the e-mail alert receive 
status for paper handling.
Service CallDisplays the e-mail alert receive 
status for service calls.
 
						

							222Dell Printer Configuration Web Tool
Print Server Settings
The Print Server Settings tab includes the Basic Information, Port Settings, 
TCP/IP, SMB, E-Mail Alert, Bonjour (mDNS), SNMP, Scan to PC, LLTD, 
Wireless LAN, and Reset Print Server pages.
Basic Information
Purpose:
To configure basic information of the printer.
Va l u e s :
 NOTE: The Auto Refresh feature is effective for the contents of the top frame, 
Printer Status page, Job List page, and Completed Jobs page.
Port Settings
Purpose:
To enable or disable printing ports and management protocol features.
Va l u e s :
System Settings Printer NameSets the name of the printer.
LocationSets the location of the printer.
Contact PersonSets the contact name, number, and other 
information of the printer administrator and service 
center. 
Administrator 
E-Mail AddressSets the contact address of the printer administrator 
and service center.
Asset Tag 
NumberEnters the asset tag number for the printer.
EWS Settings Auto RefreshAutomatically refreshes the contents of the status 
display pages.
Auto Refresh 
IntervalSets the time interval for refreshing the contents of 
the status display pages automatically from 15 to 
600 seconds.
 
						

							Dell Printer Configuration Web Tool223
Ethernet*1Ethernet 
SettingsAutoDetects the Ethernet 
transmission rate and the duplex 
settings automatically.
10BASE-T Half-
DuplexSelects 10Base-T Half-Duplex 
as the default value.
10BASE-T Full-
DuplexSelects 10Base-T Full-Duplex 
as the default value.
100BASE-TX 
Half-DuplexSelects 100Base-TX Half-
Duplex as the default value.
100BASE-TX 
Full-DuplexSelects 100Base-TX Full-
Duplex as the default value.
1000BASE-T 
Full-DuplexSelects 1000Base-T Full-
Duplex as the default value.
Current Ethernet SettingsDisplays the current settings of 
the Ethernet.
MAC AddressDisplays the MAC address of 
the printer.
Port Status LPDSets whether to enable LPD.
Port9100Sets whether to enable Port9100.
IPPSets whether to enable IPP.
WSDSets whether to enable WSD.
Network 
TWAINSets whether to enable Network TWAIN
SMBSets whether to enable SMB.
Bonjour 
(mDNS)Sets whether to enable Bonjour (mDNS).
E-Mail AlertSets whether to enable E-Mail Alert.
Te l n e tSets whether to enable Telnet.
SNMPSets whether to enable SNMP.
Update 
Address BookSets whether to enable Update Address Book.
LLTDSets whether to enable LLTD.
*1This item is available only when the printer is connected using LAN cable.
 
						

							224Dell Printer Configuration Web Tool
 NOTE: The settings in the Port Settings page will be valid only when the printer 
is rebooted. When you change or configure the settings, click the Apply New 
Settings button to apply the new settings.
TCP/IP
Purpose:
To configure the IP address, subnet mask, and gateway address of the printer. 
Va l u e s :
TCP/IP 
SettingsIP ModeSets the IP mode.
Host NameSets the host name.
IPv4 IP Address 
ModeSets the method for acquiring the IP 
address. 
Manual IP 
AddressWhen an IP address is being set manually, 
the IP is allocated to the printer using the 
format nnn.nnn.nnn.nnn. Each octet that 
makes up nnn.nnn.nnn.nnn is a value in the 
range of 0 to 254. 127 and any value in the 
range of 224 to 254 cannot be specified for 
the first octet of a gateway address.
Manual Subnet 
MaskWhen an IP address is being set manually, 
the subnet mask is specified using the 
format nnn.nnn.nnn.nnn. Each octet that 
makes up nnn.nnn.nnn.nnn is a value in the 
range of 0 to 255. 255.255.255.255 cannot 
be specified as the subnet mask.
Manual 
Gateway 
AddressWhen an IP address is being set manually, 
the gateway address is specified using the 
format nnn.nnn.nnn.nnn. Each octet that 
makes up nnn.nnn.nnn.nnn is a value in the 
range of 0 to 254. 127 and any value in the 
range of 224 to 254 cannot be specified for 
the first octet of a gateway address.
 
						

							Dell Printer Configuration Web Tool225
IPv6 Enable 
Stateless 
AddressSelect the check box to enable the stateless 
address.
Use Manual 
AddressSelect the check box to set the IP address 
manually.
Manual 
AddressSets the IP address. To specify an IPv6 
address, enter the address followed by a 
slash (/) and then 64. For details, consult 
your system administrator.
Manual 
Gateway 
AddressSets the gateway address.
DNS DNS Domain 
NameSets the DNS domain name.
IPv4 Get DNS 
Server Address 
from DHCPAllows you to enable or disable the 
automatic setting of the DNS server 
address via DHCP.
Manual DNS 
Server AddressManually sets the DNS server address in 
xxx.xxx.xxx.xxx format when Get DNS 
Server Address from DHCP is not 
selected.
IPv6 Get DNS 
Server Address 
from DHCPv6-
liteSelect the check box to get the DNS server 
address automatically from the DHCPv6-
lite server.
Manual DNS 
Server AddressSets the DNS server address.
Priority to 
IPv6 DNS 
Name 
ResolutionSelect the check box to enable the DNS 
Name Resolution feature.
 
						

							226Dell Printer Configuration Web Tool
WINS WINS ModeAllows you to enable or disable the automatic setting of the 
primary and secondary WINS server addresses via DHCP.
WINS 
Primary 
ServerManually sets the primary WINS server address in 
xxx.xxx.xxx.xxx format when WINS Mode is not selected.
WINS 
Secondary 
ServerManually sets the secondary (backup) WINS server address 
in xxx.xxx.xxx.xxx format when WINS Mode is not 
selected.
LPD Connection 
Time-OutSets the connection time-out period from 1 to 1,000 seconds.
IP Filter 
(IPv4)Click IP Filter (IPv4) to set the IP Filter settings on the IP 
Filter (IPv4) page.
Port9100 Port NumberSets the port number from 9,000 to 9,999.
Connection 
Time-OutSets the connection time-out period between 1 and 1,000 
seconds.
IP Filter 
(IPv4)Click IP Filter (IPv4) to set the IP filter settings on the IP 
Filter (IPv4) page.
IPP Printer URIDisplays the printer URI.
Connection 
Time-OutSets the connection time-out period from 1 to 1,000 seconds.
Port NumberDisplays the port number for receiving requests from the 
client.
Maximum 
SessionsDisplays the maximum number of connections received 
simultaneously by the client.
WSD Port NumberSets the port number to 80 or from 8,000 to 9,999.
Receive 
Time-OutSets the receive time-out period from 1 to 65,535 seconds.
Notification 
Time-OutSets the notification time-out period from 1 to 60 seconds.
Maximum 
Number of 
TTLSets the maximum number of TTL from 1 to 10.
Maximum 
Number of 
NotificationSets the maximum number of notifications from 10 to 20.
 
						

							Dell Printer Configuration Web Tool227
To configure the IP Filter feature, enter an IP address to be filtered in the 
Address field and the Subnet Mask in the Address Mask field. Enter a numeric 
value between 0 and 255 in each field. * is appended to the current value.
IP Filter Setup Procedure
You can set up to a maximum of five items and the first item set takes priority. 
When setting multiple filters, enter the shortest address first followed by a 
slightly longer address, a longer address and so on.
Enabling Printing From a Specified User
The following describes the procedure to enable printing only from the 
192.168.100.10 IP address.
1
Click the first column of the Access List row 1.
2Enter 192.168.100.10 in the Address field and 

255.255.255.255 in the Address Mask field.
3Select Permit.
4Click Apply New Settings.
Disabling Printing From a Specified User
The following describes the procedure to disable printing only from the 
192.168.100.10 IP address.
Network 
TWAINConnection 
Time-OutSets the connection time-out period between 1 and 65,535 
seconds.
HTTP Port Number Sets the port number to 80 or from 8,000 to 9,999.
Simultaneous 
ConnectionsDisplays the maximum number of simultaneous 
connections.
Connection 
Time-OutSets the connection time-out period from 1 to 255 seconds.
Telnet PasswordSets the password for Telnet.
Re-enter 
PasswordConfirms the set password.
Connection 
Time-OutSets the connection time-out period from 1 to 1,000 seconds.
Update 
Address 
BookConnection 
Time-OutSets the connection time-out period from 1 to 65,535 
seconds.
 
						

							228Dell Printer Configuration Web Tool
1Click the first column of the Access List row 1.
2Enter 192.168.100.10 in the Address field and 

255.255.255.255 in the Address Mask field.
3Select Reject.
4Click the first column of the Access List row 2.
5Enter 0.0.0.0 in the Address field and 0.0.0.0 in the Address 
Mask
 field.
6Select Permit.
7Click Apply New Settings.
Enabling and Disabling Printing from Network Addresses
You can enable printing from the 192.168 network address and disable 
printing from the 192.168.200 network address. 
The example below describes how to enable printing from the 
192.168.200.10 IP address.
1
Click the first column of the Access List row 1.
2Enter 192.168.200.10 in the Address field and 

255.255.255.255 in the Address Mask field.
3Select Permit.
4Click the first column of the Access List row 2.
5Enter 192.168.200.0 in the Address field and 255.255.255.0 in 
the 
Address Mask field.
6Select Reject.
7Click the first column of the Access List row 3.
8Enter 192.168.0.0 in the Address field and 255.255.0.0 in the 
Address Mask field.
9Select Permit.
10Click Apply New Settings.
SMB
Purpose:
To specify the setting of the Server Message Block (SMB) protocol.