DELL 2155cdn User Manual

							Dell Printer Configuration Web Tool209
Print from USB Defaults
Purpose:
To create your own Print from USB Defaults setting.
Va l u e s :
Printer Maintenance
The Printer Maintenance tab includes the Paper Density, Adjust BTR, 
Adjust Fuser, Auto Registration Adjustment, Color Registration 
Adjustments, Clean Developer, Reset Defaults, Initialize PrintMeter, 
Storage, Non-Dell Toner, Adjust Altitude, Clock Settings, and We b  L i n k  
Customization pages.
Paper Density
Purpose:
To specify the paper density.
Va l u e s :
Email From 
FieldSets whether to enable editing of the transmission source when you 
use Scan to E-mail.
Color Sets whether to print in color or in black and white.
Select TraySets the default input tray.
SSF Paper SizeSets the size of paper loaded in the single sheet feeder.
SSF Paper TypeSets the paper type loaded in the single sheet feeder.
2 Sided
*1Sets whether to print on both sides of a sheet of paper.
LayoutSets the output layout.
PDF PasswordSets a password.
Re-enter PDF PasswordConfirms the set password.
*1This item is available only for Dell 2155cdn Multifunction Color Printer.
PlainSets the density of plain paper to Light or Normal.
LabelSets the density of labels to Light or Normal.
 
						

							210Dell Printer Configuration Web Tool
Adjust BTR
Purpose:
To specify the reference voltage settings for the transfer roller.
Va l u e s :
Adjust Fuser
Purpose:
To specify the temperature settings value for the fuser.
Va l u e s :
PlainSets the reference voltage setting for the transfer roller for plain paper 
within the range of -6 to 6.
Plain ThickSets the reference voltage setting for the transfer roller for thick plain 
paper within the range of -6 to 6.
CoversSets the reference voltage setting for the transfer roller for cover paper 
within the range of -6 to 6.
Covers ThickSets the reference voltage setting for the transfer roller for thick cover 
paper within the range of -6 to 6.
LabelSets the reference voltage setting for the transfer roller for labels 
within the range of -6 to 6.
CoatedSets the reference voltage setting for the transfer roller for coated paper 
within the range of -6 to 6.
Coated ThickSets the reference voltage setting for the transfer roller for thick coated 
paper within the range of -6 to 6.
EnvelopeSets the reference voltage setting for the transfer roller for envelopes 
within the range of -6 to 6.
RecycledSets the reference voltage setting for the transfer roller for recycled 
paper within the range of -6 to 6.
PlainSets the temperature settings for the fuser for plain paper within the 
range of -2 to 2.
Plain ThickSets the temperature settings for the fuser for thick plain paper within 
the range of -2 to 2.
 
						

							Dell Printer Configuration Web Tool211
Auto Registration Adjustment
Purpose:
To specify whether to automatically perform color registration adjustment.
Color Registration Adjustments
Purpose:
To specify whether to manually perform color registration adjustment.
Manual Color Registration Adjustments are required such as when the printer is 
initially installed and after the printer is moved. 
 NOTE: The Color Registration Adjustments feature can be configured when 
Auto Registration Adjustment is set to Off.
Va l u e s :
CoversSets the temperature settings for the fuser for cover paper within the 
range of -2 to 2.
Covers ThickSets the temperature settings for the fuser for thick cover paper within 
the range of -2 to 2.
LabelSets the temperature settings for the fuser for labels within the range 
of -2 to 2.
CoatedSets the temperature settings for the fuser for coated paper within the 
range of -2 to 2.
Coated ThickSets the temperature settings for the fuser for thick coated paper 
within the range of -2 to 2.
EnvelopeSets the temperature settings for the fuser for envelopes within the 
range of -2 to 2.
RecycledSets the temperature settings for the fuser for recycled paper within 
the range of -2 to 2.
Auto CorrectClick the Star t button to automatically perform color registration 
correction.
 
						

							212Dell Printer Configuration Web Tool
Clean Developer
Purpose:
To clean each toner cartridge or PHD unit, or to stir the toner in a new toner 
cartridge.
Va l u e s :
Reset Defaults
Purpose:
To initialize wired network data stored in non-volatile memory 
(NVM). After 
executing this function and rebooting the printer, all wired network settings are 
reset to their default values.
Color Regi 
ChartClick the Start button to print a color registration chart. The color 
registration chart prints a lattice pattern of yellow, magenta, and cyan 
lines. On the chart, look at the values on the right side that are next to 
the line that is perfectly straight for each of the three colors. If the 
value for this line is 0, color registration adjustment is not required. If 
the value for this line is any value other than 0, specify the adjustment 
values under Color Registration Adjustments.
Color 
Registration 
AdjustmentsSets lateral (perpendicular to paper feed direction) and process (paper 
feed direction) color adjustment values individually for Yellow, 
Magenta, and Cyan within the range of -9 to 9.
Clean DeveloperStirs the toner in a new toner cartridge.
Yellow Toner RefreshCleans the toner in the yellow toner cartridge.
Magenta Toner RefreshCleans the toner in the magenta toner cartridge.
Cyan Toner RefreshCleans the toner in the cyan toner cartridge.
Black Toner RefreshCleans the toner in the black toner cartridge.
Drum RefreshCleans the surface of the PHD unit. 
 
						

							Dell Printer Configuration Web Tool213
Initialize PrintMeter
Purpose:
To initialize the print meter of the printer. When the print meter is initialized, the 
meter count is reset to 0.
Storage
 NOTE: Storage feature is available only when the optional 512 MB memory 
module is installed. 
Purpose: 
To clear all files stored in the optional 512 MB memory module.
Va l u e s :
Reset Defaults Reset Defaults User 
Fax Section and restart 
printer.Click the Start button to reset the fax 
number entries in the Address Book.
Reset Defaults User 
Scan Section and 
restart printer.Click the Start button to reset the e-
mail and server address entries in the 
Address Book.
Reset Defaults System 
Section and restart 
printer.Click the Start button to reset the 
system parameters.
Power On Wizard Power On WizardClick the Start button to perform the 
initial setup for the printer. 
Clear Storage All ClearClick the Start button to clear all files stored as Secure 
Print and Proof Print in the optional 512 MB memory 
module.
Secure 
DocumentClick the Star t button to clear all files stored as Secure 
Print in the optional 512 MB memory module.
Stored 
DocumentClick the Start button to clear all files stored in the 
optional 512 MB memory module.
 
						

							214Dell Printer Configuration Web Tool
Non-Dell Toner
Purpose:
To use toner cartridge of another manufacturer.
 NOTICE: Using a non-Dell toner cartridge may severely damage your printer. 
The warranty does not cover damages caused by using non-Dell toner cartridges.
Adjust Altitude
Purpose:
To specify the altitude of the location where the printer is installed. 
The discharge phenomenon for charging the photo conductor varies with 
barometric pressure. Adjustments are performed by specifying the altitude of the 
location where the printer is being used.
Clock Settings
Purpose:
To specify the clock settings.
Va l u e s :
Web Link Customization
Purpose:
To specify a link used for ordering consumables, which can be accessed from 
Order Supplies at: in the left frame.
Va l u e s :
Date FormatSets the date format; yy/mm/dd, mm/dd/yy, or dd/mm/yy.
Time FormatSets the time format; 24H or 12H.
Time ZoneSets the time zone.
Set DateSets the current date.
Set TimeSets the current time.
Select Reorder 
URLSets a URL to be linked to Order Supplies at:
 
						

							Dell Printer Configuration Web Tool215
Print Server Settings
Use the Print Server Settings menu to set the type of printer interface and the 
necessary conditions for communication.
The following tabbed pages are displayed in the top of the right frame.
Print Server Reports
The Print Server Reports tab includes the Print Server Setup Page and the E-
Mail Alert Setup Page.
Print Server Setup Page
Purpose:
To verify the current settings of TCP/IP (Transmission Control Protocol/Internet 
Protocol) protocol and printing ports. On this page, you can only verify the 
settings of items. If you want to change the settings, go to the pages in the Print 
Server Settings tab.
Va l u e s :
RegularDisplays the regular URL (http://accessories.us.dell.com/sna) that 
can be linked to Order Supplies at:.
PremierDisplays the premier URL (http://premier.dell.com) that can be 
linked to Order Supplies at:.
Ethernet
*1Ethernet 
SettingsDisplays the current settings of Ethernet 
transmission rate and the duplex settings.
Current 
Ethernet 
SettingsDisplays the current Ethernet settings.
MAC AddressDisplays the Media Access Control Address 
(MAC) address of the printer.
 
						

							216Dell Printer Configuration Web Tool
Wireless 
Settings*2SSIDDisplays the MAC address of the printer.
Network TypeDisplays the name that identifies the network.
MAC AddressDisplays the network type from either the Ad-Hoc 
or Infrastructure mode.
Link ChannelDisplays the MAC address of the wireless printer 
adapter.
Link QualityDisplays the channel number of the connection.
TCP/IP 
SettingsIP ModeDisplays the IP mode.
Host NameDisplays the host name.
IPv4
*3IP Address ModeDisplays the IP address mode.
IP AddressDisplays the IP address.
Subnet MaskDisplays the subnet mask.
Gateway 
AddressDisplays the gateway address.
IPv6
*4Enable Stateless 
AddressDisplays whether to enable the 
stateless address.
Use Manual 
AddressDisplays whether to set the IP 
address manually.
Manual 
Address
*5Displays the IP address.
Stateless Address 
1-3
*6Displays the stateless 
addresses.
Link Local 
Address
*6Displays the link local address.
Manual Gateway 
Address
*5Displays the gateway address.
Auto Configure 
Gateway 
Address
*6
Displays the gateway address.
 
						

							Dell Printer Configuration Web Tool217
DNS IPv4*3Get DNS Server 
Address from 
DHCPDisplays whether to 
automatically set the DNS 
server address via DHCP.
Current DNS 
Server AddressDisplays the current DNS 
server address.
IPv6
*4Get DNS Server 
Address from 
DHCPv6-liteDisplays if the printer receives 
the DNS server address 
automatically from the 
DHCPv6-lite server.
Current DNS 
Server AddressDisplays the current DNS 
server address.
Priority to IPv6 
DNS Name 
Resolution
*7
Displays whether to use the 
DNS Name Resolution feature.
WINS WINS ModeDisplays whether to automatically set the primary 
and secondary WINS server addresses via DHCP.
WINS Primary 
ServerDisplays the primary WINS server address.
WINS 
Secondary 
ServerDisplays the secondary WINS server address.
LPD Port StatusDisplays the port status of the Line Printer Daemon 
(LPD) protocol.
Connection 
Time-OutDisplays the connection time-out period.
Port9100 Port StatusDisplays the port status.
Port NumberDisplays the port number.
Connection 
Time-OutDisplays the connection time-out period.
 
						

							218Dell Printer Configuration Web Tool
IPP Port StatusDisplays the port status.
Printer URIDisplays the printer URI.
Connection 
Time-OutDisplays the connection time-out period.
Port NumberDisplays the port number.
Maximum 
SessionsDisplays the maximum number of connections 
received simultaneously by the client.
WSD Port StatusDisplays the WSD port status.
Port NumberDisplays the WSD port number.
Receive Time-
OutDisplays the receive time-out period.
Notification 
Time-OutDisplays the notification time-out period.
Maximum 
Number of TTLDisplays the maximum number of TTLs.
Maximum 
Number of 
NotificationDisplays the maximum number of notifications.
Network 
TWAINPort StatusDisplays the port status.
Connection 
Time-OutDisplays the connection time-out period.
HTTP Port StatusDisplays the port status.
Port NumberDisplays the port number.
Simultaneous 
ConnectionsDisplays the maximum number of simultaneous 
connections.
Connection 
Time-OutDisplays the connection time-out period.