Comdial DIGITECH Digital Telephone System Instructions Manual

							Press ITCM +k # 7 4 6 +k for base level.I
FEATURE DESCRIPTION
hxlliaty Llnes: A line port can be
:onditioned to serve as a port for an
sxterflal paging amplifier.
kWal Off Ice Llnes: A line port can
38 conditioned to serve as a port for a
standard telephone company supplied
zentrai office line.
Llne Names: Lines can be named as
to their function to identify them for use.
Names such as WATTS, CO, etc.,
when appearing on the display, make
locating a desired line easier for the
station user to do. Up to five characters
can be used to form a line name.
ENTRY CODE AND PROMPTING DISPLAYREFERENCE RECORD1. Dial 32.
“AUXILIARY LINES2. Select line ports to be disabled
(LED On = Disabled).
Line port I-14 
= Dial 01 - 14 or Press Al - Al4
Line port 
15,16 = Dial 15,16 or press 61, 82Line port 17-24 = Dial 17 
- 24
-OR-Press HOLD then press Al 
- A6.
3. Dial 
% for configuration mode.
1. Dial 33.
“CO. LINES”
2. Select line ports to be disabled
(LED On 
= Disabled).
Line port I-14 = Dial 01 
- 14 or Press Al - Al4
Line port 
15,16= Dial 15,16orpress Bl, 82Line port 17-24 
= Dial 17 - 24
-OR-Press HOLD then press Al 
- A6.
3. Dial 
8 for configuration mode.
IIPORT I ENTRY I P~RIIENTRYI PORTIENTRI9I117 I
IO I16 
11. Dial 34.“LINE NAME”
2. Select line ports to be disabled
(LED On = Disabled).
tine port I-14 = Dial 01 
- 14 or Press Al - Al4
Line port 
15,16 = Dial 1516 or press Bl, 82Line port 17-24 = Dial 17 
- 24
-OR-Press HOLD then press Al 
- A8.
3. Press # to clear current name.
4. Dial line name char. codes (5 char. max.).
- See character code chart (Table 4-l on Page 4-21).
- Examples:
- WATTS = Dial 9121 81 81 73
- 0156 = Dial 00, 01,05,06
(Each character must be represented by two digits.)5. Dial 
+ and repeat last three steps for next line.
-OR- .
Dial 46 * for configuration mode.
IDEFAULT = NO LINE NAMES ASSIGNED 
						

							rPress lTCM +k # 7 4 6 % for base level.I
‘EATURE DESCRIPTION
Ine Groups: Outside lines of the
ame type-can be grouped together for
ial-up outgoing access. Access codes
)r the line groups are:
Group 1 
= Dial 9
Group 2 
= Dial 81
Group 3 = Dial 82
Group 4 = Dial 83
JO773 System must be strapped for
hybrid operation, as detailed in
Chapter 3, before 
this
programming feature is
available. A line group queue
button can be assigned on a per
station basis as detailed on page
4-48.
Line Groups - continued on next page
IENTRY CODE AND PROMPTING DISPLAYREFERENCE RECORD
Line port 17-24 = Dial 17 - 24
-OR-
Press 
HOLD then press Al - A8.
4. Dial t for next group.
-OR-Dial 
+N * for next feature.
5. Dial 2 for Line Group 2“LINE GROUP 2”
(LED On = Lines Assigned)
8. Select line ports to be disabled
(LED On 
= Disabled).
Lineportl-14=DialOl -14orPressAl -A14
Lineport15,18=Dial15,16orpressBl,B2
Line port 17-24 = Dial 17 - 24
-OR-
Press 
HOLD then press Al - A8.
7. Dial t for next group.
-OR-
Dial 
+!c t for configuration mode.
8. Dial 3 for Line Group 3“L/NE GROUP 3”
(LED On = Lines Assigned)
9. 
Select line ports:
Select line ports to be disabled
(LED On 
= Disabled).Line port l-14 
= Dial 01 - 14 or Press Al - Al4
Line port 1516 = Dial 15,16 or press Bl , B2
Line port 17-24 = Dial 17 - 24
-OR-
Press 
HOLD then press Al - A8.
10. Dial f for next group.
-OR-
Dial 4~ G# for configuration mode. 1. Dial 35
2. Dial 0 for no groups assigned
“NO 
LINE GROUP”
-OR-
Dial 1 for Line Group 1“L/NE GROUP 7 ”
(LED On = Lines Assigned)
2. Select line ports to be disabled
(LED On 
= Disabled).
Line port 1-14 B Dial 01 - 14 or Press Al - Al4
Line port 1516 = Dial15,16 or press Bl, 82Press SPKR to end. 
						

							f.
PresslTCM~#7466 for baselevel.
‘EATURE DESCRIPTIONENTRY CODE AND PROMPTING DISPLAYREFERENCE RECORD
Ine Groups - continuedIO. Dial 4 for Line Group 4.“L/NE GROUP 4”
(LED On = Lines Assigned)
11. Select line ports to be disabled
(LED On = Disabled).
Line port I-14 
= Dial 01 - 14 or Press Al - Al4
Line port 15, 16 = Dial 
15,16 or press Bl , 82
Line port 17-24 = Dial 17 - 24
-OR-
Press HOLD then press Al - A8.
12. Dial % for next group.
-OR-
Dial +k +k for configuration mode.
UWToneSwltchable: Whenrotary1. Dial 36.“PULSE DIAL ”
lial lines are installed, the user can2. Select pulse dial line ports (LED On = Pulse):
iwitch from pulse (rotary dial signalling)Line port I-14 = Dial 01 - 14 or Press Al - Al4
0 tone (dual tone multiple frequency -Line port 1516 = Dial 1516 or press Bl, 82
ITMF) for accessing special circuitsLine port 17-24 = Dial 17 - 24
equirtng DTMF tones such as banking-OR-
nachines, etc. Line port dialing mustPress HOLD then press Al - A8.
7
)e programmed as pulse for rotary dial-OR-
ine interfacing or tone for DTMF line
Dial 68 to default all lines to pulse dial.rr
nterfacing.
3. Dial 3F for configuration mode.
1. Dial 37“TONE DIAL 
”
2. Select tone dial line ports (LED On = Tone):
Line port I-14 
= Dial 01 - 14 or Press Al - Al4
Line 
port 15, 16 = Dial 1516 or press Bl , B2
Line port 17-24 = Dial 17 
- 24
-OR-
-OR-
Press HOLD then press Al - A8.
Dial 00 to default all lines to tone dial.
3. Dial 
+k for configuration mode. 
						

							4bandoned Hold Release: When a1. Dial 38.“HOLD RELEASE 50 ”
listant party abandons a hold condition2. Select hold release time for line ports.
md disconnects, the central office will(LED On = 50 msec.)
;end a forward disconnect signal to theLine port l-14 = Dial 01 - 14 or Press Al - Al4
;ystem. The signal can be either 50Line port 15,16 = Dial 15,16 or press Bl, B2
nsec. or 350 msec. in length. ProgramLine port 17-24 
= Dial 17 - 24
he system to match the central off ice
-OR-
ime.
Press HOLD then press Al - A8.
3. Dial +k for configuration mode.
Direct Departmental Calling: Outside1. Dial 39.“DEPT. CALLlNG ”
ines can be assigned to one of four2. Select department.
jifferent departments. Calls receivedDial 0 for none.“NO DEPARTMENT n
an a line assigned to a department willDial 1 for dept 1.“DEPARTMENT 1 n
7unt for any idle station in thatDial 2 for dept 2.“DEPARTMENT 2 ”
department to ring.Dial 3 for dept 3.“DEPARTMENT 3 n
Dial 4 for dept 4.“DEPARTMENT 4 n
NOTE: Assign stations to these
3. Select line ports to be disabled
departments 
pef the procedure
(LED On = Disabled).
,on page 4-31.Line port l-14 = Dial 01 - 14 or Press Al - Al4
Line port 15, 16 = Dial 15,16 or press Bl, 82
Line port 17-24 = Dial 17 - 24
-OR-
Press HOLD then press Al - A8.
4. Dial +k for next department.
-OR-
Dial ++ t for configuration mode.
Press ITCM % # 7 4 6 % for base level.
FEATURE DESCRIPTIONENTRY CODE AND PROMPTING DISPLAYREFERENCE RECORDI
PORT1 ENTRY 1 PORliENTRY 1 PORTIENTRY
1917 I
DEFAULT = 50 MSEC.
7I115I123t
8116174I
DEFAULT = NO DEPARTMENT/LINE
ASSIGNMENTS 
						

							f
ii
rPress ITCM +K # 7 4 6 8 for base level.
:EATURE DESCRIPTION
utomatlc Privacy: A line can be
lade private or non-private. In the
rivate mode, a station has exclusive
se of a line during a call. Lines are
rivate unless re-programmed making
iem non-private.
IOTE: P rugram a station button to actas a privacy release button as
detailed on page 4-43.
Llne To Llne Port ReAsslgnment:
-he programming attributes for a line
hat is connected to a particular line
art can be m-assigned to a different
ne port by this programming action.
his feature allows all software
rttrtbutes for a line to be automatically
exchanged with those assigned to
mother line at 
a different line port
without physically re-locating the lines
rr reprogramming any line attributes.VOTE: refer 
fo page 3-4 for additional
discussion.
3lock Programmlng: Features that
are assigned to a particular line can be
Issigned to another line or to an entire
flock of lines with one programming
action.
ENTRY CODE AND PROMPTING DISPLAY
1. Dial 40.“PRIVACY RELEASE ”
2. Select line ports to be non-private
(LED On = Non Private):
Line port I-14 
= Dial 01 - 14 or Press Al - Al4
Line port 15, 16 = Dial 
l&l6 or press Bl, 82
Line port 17-24 
= Dial 17 - 24
-OR-
Press HOLD then press Al - A8.
3. Dial 
++ for configuration mode.
1. Dial 
41.“ASSIGN LOGICAUPHYS ”
2. Select currently assigned line port number.
“PHYS LATCH XXn
Line port I-14 = Dial 01 - 14 or Press Al - Al4
Line port 15, 18 
= Dial 15,16 or press Bl, 82
Line port 17-24 
= Dial 17 - 24
-OR-
Press HOLD then press Al - A8.
3. Dial new line port number 
(01 - 24 = line 1 - 24).“LOG/CAL LINE XX
”
4. Dial # to make assignment.
5. Repeat steps 2 -4 for another assignment.
-OR-
8. Dial ?# for configuration mode.
1. Dial 42.“ELK PROGRAMMING 
”
2. Select model line port“MODEL LINE XX ”Line port l-l 4 
= Press Al - Al 4
Line port 1516 = Press Bl ,B2
Line port 17-24 = Press HOLD then press Al - A8.
3. Select lines to match model line
(press buttons as detailed above).
4. Dial % and repeat steps 2 and 3 for next model line
-OR-
Dial 
G# +# for configuration mode.
Continued on next pageREFERENCE RECORD
/PORTIENTRY IPORT~ENTRY I PORTIENTRY
8I116 I
DEFAULT 
= ALL LINES PRIVATE
ITRY 1 PORFNTRY I PORT! 1
laPORT EN
1IJII17 I
21Q ’ODEL 
LlNd BLOCKFD LINESI
Press SPKR to em- 
						

							Press ITCM + # 7 4 6 ++ for base level.I
FEATURE DESCRIPTION
Block Programmlng 
- continued
L
ENTRY CODE AND PROMPTING DISPLAY
REFERENCE RECORD
“BLK PROGRAMMING ”
2. Select model line port with keypad.
“MODEL LINE 
XX
2. Select line ports to be disabled
Line port 1 
- 14 = Press Al - Al4
Line 
Port 1516 = Press Bl ,B2
Line Port 17 - 24 = Press HOLD thenpress Al 
- A6
3. Dial first line port in block (dial code as above).
4. Dial 
#.
5. Dial last line port In block (dial code as above).
6. Dial 
#.
7. Dial * for next model line.
-OR-
Dial +B + for configuration mode.NOTE: The 
17~8, last and a1 lhes In behwen will be block
ptvgmmmad like the model /he.To blodc pmgram an
hdiid Kne, seled the first fine and last he IO be
the same number. For example: 01, 02#, 02#
pmgmms line 02 he same as Me 01 is programmed. 
						

							Table 4-l. CHARACTER DIALING CODES CHARTI 
CHARI CODE I CHARI CODE I CHAR ICODE I
A21a
24Space12
B22b25-15C
23C26.17t DI
l3i
I
IdI34I /-(18t
E32r351191F
33
36.
G41944 I
H42h45 :
I II43IiI46I1
i52k553
L53I564
il iiim645
N62
n656--
16 (63II ~~
!0166
IP1711 DI74
R72r750
S73S76T
81t84
U82U85
V83v86
w91W94I
X92X95
Y93Y96Z
13z
16 
						

							STATION CONFIGURATION
lark the desired selections in the charts to record programming needs. (Make copies of the pages to provide additional records if needed.
Mditional records may be needed when add-on expansion modules are employed to extend the station capacity of a base unit.)Dial the feature
zode and then dial the selection code or press the programrnfng button to program the selection.
NOTE: Acurrent
provided
&
rugram setting is indicated by a lighted LED next to the programming button for that selection.When a foggle (onhrr) action is
y a sing/e button, the lighted LED indicates an active feature. When programming without 
a console, repeat the procedure to disable afeafure at a keypad selected station.
Station port selection is made by dialing a selection number on the keypad per the following reference chart.
STAKEYPAD BUTTONS
IO-57 10-57
FEATURE DESCRIPTIONENTRY CODE AND PROMPTING DISPLAYREFERENCE RECORD
Base Level: The first step In any
programming sequence is to 
ehter the
base level. Once in this mode, any
desired configuration can be set.Press 
ITCM Dial * # 7 4 6 G+
Statlon Default: The station1. Dial 56.“STATION DEFAULT ”
configuration features, described in the
2. Dial 66 to defauft station ports system-wide.
following procedures, can be defaulted to
-OR-
a standard Set Of Vd.leS. These Vth3S3. Select station poti to be defaulted:
will provide satisfactory system
- Station 10 - 57: Dial 10 - 57.
performance in a broad range of site
4. Dial 
% for additional stations to default.
applications.
-OR-
Dial * % for configuration mode.1 
PressSPKR toend. 1
II 
						

							f
E
Press ITCM ++ # 7 4 6 t for base level.
FEATURE DESCRIPTION
Flexlble Station Numberlng: 
The
;ystem supports a flexible station
numbering plan for calling individual
stations and departments. Each station
:an be programmed to respond to the
dialing of any available number between
10 and 7999; however, the same dialing
zode cannot be assigned as both a
station extension number and a
department access code, nor will the
system allow an extension number or
access code conflict such as 15 and
1500 to be assigned.
Direct Department Calling (Access
Codes): 
Department access codes can
be programmed to be any number
between 10 and 7999; however, the
same dialing code cannot be assigned
as both a station extension number and
a department access code nor will the
system allow an extension number
conflict such as 15 and 1500 to be
assigned. Further, with system defaultet
extension numbers, assigned
department access codes must 
start at
0058 or larger.NOTE: See page 
4- 18 for line
assignment and page
4-3 
1 for station assignment
ENTRY CODE AND PROMPTING DISPLAY
1. Dial 52.“ACCESS CODE ”
2. Dial 1 to assign Ext no.“ASSIGN EXT. NUM.”
3. Select station number:“EXT. xxxx ”-Station 
lo-57= Dial10-57
4. Dial new ext. number.“HT. xxxx YYW VI
NO773 Extension number can be max. of four digits.
If fess than four digits, leading zeros must be
tiaied before number.
Example: For 
ext no. IS, dial 0015).
5. Select next station number and assign ext. no.
-OR-
Dial t for configuration mode.
1. Dial 52.“ACCESS CODE 
”
2. Dial 2 to assign access codes to depts.“DEPT. CALLING 
”
3. Dial 1 - 4 for dept. 1 - 4.“DEPTX WYY ”
4. Dial new access code.“DEPT X YYW ZZ
NO773 New code can be max. of four digits.
If less than four digits, lea&g zeros must
be 
daled before number. Code cannot
conflict with station extension numbers.
5. Dial next department number and program
access code.
-OR-
Dial f for next access code feature.
-OR-
Dial * + for configuration mode.
iEFERENCE RECORD
DFPARTMENT ACCESS CODF
11713141
DEFAULT q NOT AS’GND
IPress SPKR to end.I 
						

							IPress ITCM ?& # 7 4 6 +Ic for base level.I
FEATURE DESCRIPTION
ixecutlve Overrlde: Selected stations
an be provided with busy override. This
zature allows the station to override a
lusy condition at a station, sound a
rarning tone, and gain access to the
bxisting conversation.
10 Not Dlsturb (DND) Overrlde:
selected stations can be provided with
IND override capability. This capability
rllows the station to override a do not
disturb condition and ring a station
operating in that mode.
VOTE: Executive override, as
desctibed above, is auto-
maGcal/y enabled when DND
override is programmed. Also
refer to 
DND inhibit procedure
on page 
4-8.
fNTRY CODE AND PROMPTING DISPLAY
I
I. Dial 53“STATION FEATURES”
!. Dial 02.“EXEC. OVERRIDE ”
B. Select station ports to be programmed:
- Station 10 - 57: Dial 10 - 57.
1. Dial + for next station feature.
-OR-
Dial +k f for configuration mode.
I. Dial 53
“STATION FEATURES”
!. Dial 03.“DND OVERRIDE *
3. Select station ports to be programmed:
- Station 10 - 57: Dial 10 - 57.
1. Dial ++ for next station feature.
-OR-
Dial 
+B * for configuration mode.
3EFERENCE RECORD
DEFAULT 
q NOPORT
39
k- ASSIG‘JEDIPORT ENTRY
ii
18I