Comdial DIGITECH Digital Telephone System Instructions Manual

							Press ITCM % # 7 4 6 + for base level.
FEATURE DESCRIPTION
Jne Group Queue Button: A station
Jser can queue for a busy line by
jressing a button that is programmed as
he line group queue button.
Recount Code Button: Press the
amount code button and then dial an
account code to record a call into a
particular catagory without interrupting
the call.ENTRY CODE AND PROMPTING DISPLAY
1. Dial 66.“BUTTON MAPPING ”
2. Dial 15.“ASSIGN LINE GRP Q”
3. Select button to be programmed:-Press Al 
- A14, Bl - 86.
4. Select station ports to be programmed
with QUEUE button:
- Station 10 - 57: Dial 10 - 57.
5. Dial 
5 for next line group queue
button assignment.
-OR-
Dial +k +k for next button mapping feature
-OR-
Dial * +k +k for configuration mode..
1. Dial 66.
“BUmON MAPPING”
2. Dial 17.“ASSIGN ACCT KEY 
”
3. Select button to be programmed:
- Press Al - A14, Bl - B6
4. Select station ports to be programmed:
- Station 10 - 57: Dial 10 - 57.
5. Dial 
+ for further ACCOUNT CODE
button assignment.
al-
Dial ++ +k for next button mapping feature.
-OR-
Dial % % % for next configuration mode.REFERENCE RECORD
SEE CHART ON PAGE 4-49
I
SEE CHART ON PAGE 4-49I
IPress SPKR to end.I 
						

							IMI 66-083System Programming z
NON - SQUARE SYSTEM REFERENCE RECORD
(Copy this chart for additional record space if add-on expansion modules are included with the system).,
1B2tB3iB4 tB5 iB6 iB7lB8 IA1I A2iA3 IA4 IA5 1~6 IA7 1~8~A9~AlO~A1l~A12~13~Al4~
STA:
STA:
STA:
STA:
STA:
STA:
STA:
STA:
STA:
STA:
STA:
STA:
STA:
STA:
STA:
STA:
STA:
STA:
STA:
STA:
STA:
STA:
STA:
STA:
STA:
STA:
STA:
IDEFAULTSEllINGS:Bl- B8= -Line 1 Line 8,and Al 21,=A2 19, A3==17, A4=15,AS 13,=A6=11,
A7 o 9,A8 = 22, A9 = 20,A10 I 16, All= 16, Al2 =14, Al3=12.Al4 = 10
4-49 
						

							E-A3 
-A4 
-
AS -A6 
-A7 
-Al
A2
A3
A4
A5
A6A7
STATION RECORI-
(Copy This Record Sheet As Required 
FSS Additional Stations)0
Ek
A60A9
0A10
0All
0Al2
0
Al3
0
Al4
B5
84
81A6
A9
A10
All
Al2
Al3
Al4
ED
STATION NAMF
STATION LOCATION
81
82
83
0 LCD
B6 
cl 10x14
87B6 cl 10x14
83
82
SpeakerphoneFlgure 4-l. Locatlon Of 
liuttons On
PROGRAMMED BUTTON FUNCTION
bEKer code on button chart)
..................Blank
Lnn...................Line 01
- 24
Snn..................Station
10- 57
DND.................Donotdisturb
PRI...................Privacy
IC2...................Second intercom
ACC.................Account code
SAV..................Save
Speakerphone
ZPn
..................Zonepage1-3
....................
Monitor Telephone
Gt
All-callpage
.................Automatic call back
CF
....................Call forward
CPn
..................Call park orbii1-9
TGn..................Line groupl-4
VAB
..................Voice announce block
TGQ
.................Line group queue
Telephone Faceplate 
						

							Press ITCM ++ # 7 4 6 * for base level.
FEATURE DESCRIPTION
itatlon-to-Statlon Port Reasslgnment:
The extension number and all other
)rogrammable attributes of a station that
ire initially assigned to a particular port
:an be reassigned to a different port by
xogramming action. This feature allows
adds, moves, and changes to be made
Nithout relocating the station wiring.
NOTE; Refer to automatic station
felocafion on page 4- 10 and
the station connections
discussion found on page 3-6.
Remember, the station 
IO
to station 
port 10 assignment
cannot be reassigned.
Block Programmlng: A configuration
assigned to 
a particular station can be
assigned to one other station or to an
entire block of stations with one
programming action.
INTRY CODE AND PROMPTING DISPLAY1 REFERENCE RECORD_
 Dial 57 to re-assign station to port.
“ASSIGN STA/PORT
!. Dial station extension number. 6610 - 7999.
“PHYS PORT XX
1. Dial physical port number 10 - 57.
“LOGICAL STA XX
1. Dial # to make assignment.
i. Dial ++ for configuration mode.
,....-.---.. -._..-.YPORTFNTRY.
2642
12743‘)Qaa
51
II3652
1I 3753
54
I 395524 I
I40I156I
254157
DEFAULT = LOGICAL SAME AS PHYSICAL
JPORT10=STA10,ETC.)
.
I. Dial 56.“BLK PROGRAMWNG ”MODEL STATIONI
2. Select model station port:BLOCKED STATIONS 1
- Station 10 - 57 = dial 10 - 57.“MODELSTA XX 
”
3. Dial first station port in block (dial code as above
4. Dial 
##.
5. Dial last station port in block (dial code as above
6. Dial #.
7. Dial 
% for further block programming.
-OR-
Dial f +Ic for configuration mode.
NOTE: The first, last and all statbn ports in between will beb/h programmed /he fhe mode/ stafion port To
blocA program an individual station port, select rhe first
and last port to be the same number. [For example: 25,
21% 26# programs station 26 exacffy as 25 .)1
PressSPKR10end.J 
						

							IPress ITCM +R # 7 4 6 +K for base level.I
‘EATURE DESCRIPTION
StatIon Dlsable: Station pork can be
disabled on a per station basis.
INTRY CODE AND PROMPTING DISPLAY
I. Dial 59.“DISABLE STATION!3
!. Select station ports to be disabled.
- Station 10 - 57: Dial 10 - 57.
1. Dial +k for configuration mode.REFERENCE RECORD
233955
244056
25
4157DEFAULT 
= NO STATIONS DISABLED
IPress SPKR to end.I 
						

							DIRECT INWARD STATION DIALING (DISD)he 
DISD feature allows an external party to call an intercom station directly without assistance by the attendant. The DISD call must be received
n a line which has been specially programmed to allow this feature. Any line can be programmed to be a 
DISD line for both the normal mode of
peration and the night transfer (of ringing) mode of operation.
he number of rings which occurs on a 
DISD line before it is answered is programmable.
By setting a large number of rings, time is allowed for a
all to be serviced in a regular manner by stations that have a line appearance for the 
DISD line. Setting the number of rings to 0 disables the line
)r DlSD’u’se.If a line is to be dedicated for DISD use, it is a good practice to set it for one ring. The amount of time allowed for an extension
umber to be dialed is programmable as is the 
DISD assist station that will answer calls that are not completed during this dial time limit.
is recommended that a music source be connected to the system to provide a reassurance to the caller during a camp-on situation when the
rlSD feature is being used.
FEATURE DESCRIPTION
Base Level: The first step in any
jrogramming sequence is to enter the
)ase level. Once in this mode, any
desired configuration can be set.
Dlal Tlme Llmlt: When extension
number dialing is not completed within
the programmed dial time limit, a 
DISD
zall is routed to the assist station if one
is programmed; otherwise, the line is
dropped.
DISD lncomlng Rings: The number of
rings which occurs on a 
DISD line
before it is answered is programmable.
Setting a large number of rings allows
time for a call to be serviced in a
regular manner by stations that have
line appearance for the 
DISD line if
such action is desired.
- .ENTRY CODE AND PROMPTING DISPLAY
Press 
ITCM Dial % # 7 4 6 f1. Dial 44.
“DISD DIAL TIME X n2. Press program button to select dial time limit:
- Dial 1 or press Al = 6 sec.
- Dial 2 or press A2 = 9 sec.
- Dial 3 or press A3 = 12 sec.
- Dial 4 or press A4 = 15 sec.
3. Press 
+N for configuration mode.
1. Dial 45.
“DISD RINGS ”2. Press program button to choose operating mode
- Dial 1 or press Al
= normal mode.“DISD RINGS DAY X ”
-OR-- Dial 2 or press A2 = night transfer
(of ringing) mode.
‘DISD RNGS NITE x”3. Select rings to occur before line is answered.
- Dial 0 for no rings. This disables DISD for line.
-0%
- Dial 1 - 9 = rings 1 - 9
(LED On 
= lines assigned to number of rings).
ContinuedREFERENCE RECORD
DlAl TIME
61 9
T (SFC!12 I 15
DEFAULT q 12 SEC 
						

							f
Y
Press ITCM % # 7 4 6 t for base level.
‘EATURE DESCRIPTIONENTRY CODE AND PROMPTING DISPLAYREFERENCE RECORD
1ISD Incoming Ring - Continued- Dial # then assign line pork to ring number.DISD INCOMING RINGSLine port 
1 - 14 = Dial 01 -14 or Press Al - Al4011 1213/415(6171819Line port 
15,16 = Dial 15, I6 or Press BI, 82DEFAULT = 0 RINGSLine 
port17-24=DialI7-24
-OR-
Press HOLD then press AI - A8
4. Press 
+k and repeat steps 2 and 3
for further 
DISD ring assignment.
-OR-
Press % % for configuration mode.
1ISD Assist Statlon: When extension1. Dial 46.“DISD ASSIST ”1DAY STA MGHT STA UMS AS GM2
lumber dialing is not completed within2. Choose operating mode to be programmed:
,he programmed dial time limit, the call
- Dial I or press AI =
s routed to the 
DISD assist station.normal mode.“DISD ASSIST DAY X nDEFAULT = STA IO DAY AND NIGHT
-OR-
- Dial ‘2 or press A2 = night transfer
(of ringing) mode.
“DISD ASSIST NITE”
3. Select assist station.
- Dial 08 for no station (line drops after timeout).
-OR-
- Dial IO - 67 to select DISD assist station.
(LED 
On = lines assigned to assist station).
- Dial # then assign line pork to assist station.
Line 
port 1 - 14 = Dial 01 -14 or Press Al - Al4
Line port 15, 16 = Dial 15, I6 or Press 
Bl, B2
Line 
port 17 - 24 = Dial 17 - 24-OR-
Press HOLD then press AI - A8
4. Press 
% and repeat steps 2 and 3
for further assist station programming.-OR-
Press * * for configuration mode.
I11
 Press SPKR to end.]