Home > Comdial > Communications System > Comdial DIGITECH Digital Telephone System Instructions Manual

Comdial DIGITECH Digital Telephone System Instructions Manual

    Download as PDF Print this page Share this page

    Have a look at the manual Comdial DIGITECH Digital Telephone System Instructions Manual online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 133 Comdial manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.

    							Press ITCM 3F # 7 4 6 % for base level.I
    FEATURE DESCRIPTIONENTRY CODE AND PROMPTING DISPLAY
    rolce Announce Blocklng: This feature
    allows a station user to block voice
    announced intercom signalling.
    System Speed Dlal Toll Restrlctlon:
    When this feature is enabled, previously
    programmed toll restriction tables that
    are assigned to a station are applied to
    system speed dial calls when they are
    made from the station.
    1. Dial 53.“STATION FEATURES”
    2. Dial 04.“VOICE BLOCK
    3. Select station ports to be programmed:
    - Station 10 - 57: Dial 10 - 57.
    4. Dial +I6 for next station feature.
    -OR-
    ,
    Dial % ‘Ik for configuration mode.
    1.Dial 53.“STATION FEATURES’
    2.Dial 05.5YS SPD TOLL RST”
    3. Select station ports to be programmed:
    - Station10-57:Dial10 57.-
    4. Dial +K for next station feature.
    -OR-
    Dial +I6 +% for configuration mode.
    REFERENCE RECORD
    24
    II40II56I
    254157
    DEFAULT 
    = NOT ASSIGNED
    Y IPORT ! ENIRY! PQPORT FNTR’FIT ENTRY
    106I1 42
    I “r)
    3248
    3349
    3450
    l-419II35II51I
    203652I
    E‘137
    53
    2738
    54
    233955
    244056
    25
    II 41II 57I
    DEFAULT q NOT ASSIGNEDI
    IPress SPKR to end.I 
    						
    							Press ITCM +% # 7 4 6 % for base level.
    FEATURE DESCRIPTIONENTRY CODE AND PROMPTING DISPLAYREFERENCE RECORD
    I
    lessage Walt Orlglnate: A station that
    programmed with this feature can
    Dntrol the message waiting light at othe
    lations in the system.
    IOTE This feature must be
    programmed at a station that is
    designated as a central
    message desk per 
    the
    procedure below.
    ientral Message Desk: One station in
    18 system can be designated as the
    ‘entral message desk and be arranged
    Dr exclusive messaging waiting control.
    his station must have message wait
    lriginate enabled in order to control
    nessage waiting light at another station
    VOTE: This station will also have the
    message wait 
    odginate feature,
    as detailed above,
    automatically enabled when
    the central message desk
    feature is enabled.
    I. Dial 53.“STATION FEATURES”
    2.Dial 06.“MSG.WAITOR/G.”
    3. Select station ports to be programmed:
    - Station10- 57: Dial 10 -57.
    1. Dial % for next station feature.
    -OR-
    Dial 5 5forconfigurationmode.
    1. Dial 63.
    “STATION FEATURES”
    2. Dial 08.“MSG DESK ”
    3. Select station ports to be programmed:
    - Station 10 - 57: Dial 10 - 57.
    4. Dial +N for next station feature.
    -OR-
    Dial G# ++ for configuration mode.
    1834
    1935
    2036
    2137
    ;3 238 39
    2440II56I
    254157
    DEFAULT 
    = NOT ASSIGNED
    Press SPKR to end. 
    						
    							lnglng Llne Preference:A ringingline
    ill automatically be answered when a“RING 
    LINE PREF. ”
    ation is taken off-hook.3. Select station ports to be programmed:
    - Station 10 - 57: Dial 10 - 57.
    4. Dial 
    +Ic for next station feature.
    Dial 
    +Ic % for configuration mode.
    “STATION FEATURES”
    “SERVICE OBSERVE 
    ”
    IISO be arranged so that they cannot be- Station 10 -57:Dial10 - 57.
    serviced observed.
    4. Dial + for next station feature.
    VOTE: Executive override, as detailed
    on page 4-24, is automaticallyDial % +Ic for configuration mode.
    enabled when the service
    observing feature is enabled.
    “STAT/ON FEATURES”“UNOBSERVABLE 
    ”
    3. Select station ports to be programmed:
    - Station 10 - 57: Dial 10 - 57.
    4. Dial 
    +Ic for next station feature.
    Dial 
    +Ic + for configuration
    Press SPKR to end. 
    						
    							Press ITCM % # 7 4 6 +# for base level.
    FEATURE DESCRIPTIONENTRY CODE AND PROMPTING DISPLAY1
     REFERENCE RECORD
    Wtomatlc Hold: With this feature
    mabled, pressing another line button
    vhile already on a line call will
    Momatically place this existing call on
    told.
    Automatic Hold For Intercom: With this
    feature enabled, pressing another
    intercom button or line button while
    already on an intercom call will
    automatically place this existing call on
    hold.
    1. Dial 53.“STATION FEATURES”
    2. Dial 
    11.“AUTO HOLD ”
    3. Select station ports to be programmed:
    - Station 10 - 57: Dial 10 - 57.
    4. Dial 
    +k for next station feature.
    -OR-
    Dial +N +N for configuration mode.
    1. Dial 53.“STATION FEATURES”
    2. Dial 12.
    “ITCM AUTO HOLD”
    3. Select station ports to be programmed:
    - Station 10 - 57: Dial 10 - 57.
    4. Dial 
    G# for next station feature.
    -OR-
    Dial t +N for configuration mode.
    35II 41II 57I
    DEFAULT = NOT ASSIGNED 
    						
    							f
    c
    Press ITCM +k # 7 4 6 % for base level.
    ‘EATURE DESCRIPTION
    ieadset Interface: 
    A station port can be
    mabled to allow headset operation.
    Personal Rlnglng Tones: A station can
    oe programmed to ring in one of four
    distinctive tones:
    1.668/571 Hz @ 16 Hz warble
    2.1000/800 Hz @ 18 Hz warble
    3.666/571 Hz @ 23 Hz warble
    4.1000/800 Hz @ 23 Hz warble
    ENTRY CODE AND PROMPTING DISPLAYREFERENCE RECORD
    1. Dial 53.
    2. Dial 13.
    “HEADSET MODE
    3. Select station ports to be programmed:
    - Station 10 - 57: Dial 10 - 57.
    4. Dial ++ for next station feature.
    -OR-
    Dial +k % for configuration mode.
    “STATION FEATURES”
    !31147II132II48I
    33491
    I!34!150!1I135II 51I
    3652I!37!!53!I
    II38II54I
    3955I
    !40!!56!I25II 41II 57I
    DEFAULT = NOT ASSIGNEDI
    3. Select ringing tone.
    - Dial 1 for tone 1.“RINGING TONE 1 ”
    - Dial 2 for tone 2.“RINGING TONE 2 ”
    - Dial 3 for tone 3.“RINGING TONE 3 ”
    - Dial 4 for tone 4.“RINGING TONE 4 ”
    4. Select station ports to be programmed:
    - Station 10 - 57: Dial 10 - 57.
    5. Dial +N for next ringing tone assignment.
    -OR-
    Press * * for next station feature.
    -OR-
    Press +k * +N for configuration mode.
    I
    Press SPKR to end.
    III 
    						
    							Press ITCM ++ # 7 4 6 % for base level.
    “GRP. CALL PICKUP”4. Dial 1 -4forgp. 
    1 -4“GROUPX w
    5. Select station ports to be programmed:
    - Station 10 - 57: Dial 10 - 57.
    6. Dial * for next group
    Dial 
    t +K for next station feature.
    Dial 
    * +K * for configuration mode.
    NOTE: To remove station from group, assign i? to group 0.
    ntercom Hunt Group: Stations can be“STATION FEATURES”
    “ITCM HUNT LINK ”
    station to ring.
    4. Select second linking station
    - Station 10 - 57: Dial 10 - 57.
    5. Disable a link, if desired, by linking
    a station to itself.
    6. Dial 
    +N for another link
    (ExampleA:17to16,18to16and19to16;
    Example 0: 16 to 17, 17 to 18, and 18 to 16.)
    7. Dial % *for next station feature.Press SPKR to end. 
    						
    							Press ITCM ++ # 7 4 6 % for base level.I
    Direct Department Calllng: Stations
    can be grouped by department to allow a
    call to search for an idle station within a
    department if a busy or RNA is
    encountered at a called station. There
    can be up to four departments with up to
    16 stations in each one. One additional
    station can be placed in each
    department to serve as a termination
    station. Calls that roll to a termination
    station will follow a call forward if it is set
    at that station.
    NOTE: See page 4- 18 for depaftment
    line assignments and
    page 4-23 for department
    access code assignemnt.
    Audlble Monltorlng: The DSS/BLF at a
    multiline station provides a visual
    indication of idle, busy and line ringing
    status of monitored stations. Audible
    indication of direct and delayed ringing
    can be provided for selected stations if
    the visual indications are program
    enabled (refer to system configuration
    “station monitoring” procedure on page
    4-9).DRT 1 ENTRY 
    i PORT 1 ENTRY 1 PORT~l~ENTRYl 1. Dial 53.“STATION FEATURES”
    2. Dial 19.“DEPT. CALLING ”
    3. Dial 1 - 4 for dept. 1 - 4.“DEPARTMENT X
    4. Select department stations:
    - Station 10 - 57: Dial 10 - 57.
    5. Dial 
    ++ to program next department.
    6. Dial 5 
    - 8 for termination station in dept. 1 - 4.“DEPARTMENT X 
    ”
    7. Select termination station:
    - Station 10 - 57: Dial 10 - 57.
    8. Dial 
    t to program next department termination
    station..
    -OR-
    Dial +# +k for next station feature.
    -OR-
    Dial +k +# +k for configuration mode.
    FEATURE DESCRIPTIONENTRY CODE AND PROMPTING DISPLAYREFERENCE RECORD
    I0I126II42I
    127I 43
    1. Dial 53.
    “STATION FEATURES”
    2. Dial 20.“AUDIl3LE MONITOR *
    3. Dial 1 for no audible monitoring. “NONE”
    4. Dial 2 for direct ring
    monitoring.“DIRECT RING 
    ”
    5. Dial 3 for delayed ring
    monitoring.“DELAYED RING 
    ”
    6. Select stations for programming:
    - Station 10 - 57: Dial 10 - 57.
    7. Dial 
    t next monitoring condition.
    -OR-
    Dial +k + for next station feature.
    -OR-
    Dial +# +k * for configuration mode.
    28443
    f 945
    3046
    5
    3147
    6
    II32II48I
    73349I
    ‘5
    II 41I
    ~EFADLT = NONE ASSIGNED
    I 57I
    1‘4 I
    140 I156I
    5
    DEFAULT
    4157
    qNONE ASSIGNED
    Press SPKR to end.I
    If 
    						
    							rI-
    F:EATlJRE DESCRIPTIONENTRY CODE AND PROMPTING DISPLAYREFERENCE RECORD
    C:all Forward On BusylRlng - No
    P
    swer (RNA): Call forwarding of busy,
    aInd ring-no answer calls to a particular
    S‘tation can be automatic. As such, it
    S#ends those calls to any idle station
    aassociated either by intercom hunt group
    alr by department with the called station.
    1Jse this feature to arrange for calls to
    C:ycle rapidly through such associated
    sstations testing each one in turn with
    S;everal rings.
    IVOTE: Also program the system
    intercom 
    signalling as tone
    for the 
    first choice.
    See page 4-8.
    !WitIon Message Detail Account
    (,SMDA) Departments: Selected station!
    (:an be arranged together making it
    Imssible for an SMDA report to be
    !Jenerated which will only include
    information concerning that specific
    !station arrangement.
    NOTE: Also assign SMDA depirtment
    numbers. See page 4-68.
    Press ITCM +k # 7 4 6 +k for base level.I-
    1. Dial 53.“STATION FEATURES”
    2. Dial 21.“CALL FWD RNA 
    ”
    3. Dial 0 - 9 for 0 - 9 rings before forwarding.
    “RING= X ”
    4. Select stations for which calls will be
    forwarded after selected number of rings:
    - Station 10 - 57: Dial 10 - 57.
    5. Dial % for additional station ring assigments.
    -OR-
    Dial k +N for next station feature.
    -OR-
    Dial +# + % for configuration mode.
    1. Dial 53.“STATION FEATURES”
    2. Dial 22.
    “SMDA DEPARTMENTS”
    3. Dial 0 for no SMDA dept. assigned.“DEPARTMENT 
    0 *
    -OR-
    4. Dial 1 - 8 for dept 1 - 8.“DEPARTMENT X n
    5. Select stations for SMDA department:
    - Station 10 - 57: Dial 10 - 57.
    6. Dial ++ for additional department/station
    assigments.
    -OR-
    Dial % + for next station feature.
    -OR-
    Dial t * % for configuration mode.
    !4
    IEFAULT = NOPORT 
    1 ENTRY
    36I
    37
    38
    39
    40
    41
    r ASSIGNED
    51
    52
    53
    54
    55
    122844
    1329
    45
    143046 
    						
    							Press ITCM +K # 7 4 6 % for base level.
    FEATURE DESCRIPTION
    secure Off-Hook Voice Announce
    ISOHVA) Dlsable: The SOHVA feature
    s standard for every digital telephone
    station. The feature can be disabled with
    his programming selection.
    Secure Off-Hook Voice Announce
    (SOHVA) Groups: 
    Arrange the ability of
    a station port to originate and/or receive
    SOHVA calls by assigning SOHVA
    calling groups to station ports. Certain
    station ports can be arranged together
    for SOHVA calling between one another
    while other station ports in the system
    are excluded from this group. Eight
    different fixed-configuration SOHVA
    groups are provided by the system.
    ENTRY CODE AND PROMPTING DISPLAY
    1. Dial 53“STATION FEATURE5
    2. Dial 24
    .“SECURE OHVA
    3. Select station port for programming
    - Station 10 - 57: Dial 10 - 57.
    1. Dial + for next station feature.
    -OR-
    Dial % +k for configuration mode.
    1. Dial 53.“STATION FEATURES
    2. Dial 30.“SOHVA GROUP
    3. Dial 
    1 - 6 for gp. 1-8.“SOHVA GROUP X
    4. Select all station ports to receive SOHVA 
    groq
    -Station 10 - 57: Dial 10 - 57
    5. Dial +k and repeat steps 4 and 5 for additional
    SOHVA group/station assignments
    -OR-
    Dial ++ ++ for next station feature
    -OR-
    Dial ++ t +k for configuration mode.REFERENCE RECORD
    3248
    33
    49
    3450
    25
    I141I157I
    DEFAULT = SOHVA ENABLED AT ALL STA.
    173349
    18
    34
    50
    193551
    IDEFAULT = NO GROUPS AS’GND
    Press SPKR to end. 
    						
    							Press ITCM +# # 7 4 6 % for base level.
    :EATlJRE DESCRIPTION
    Iata Security Port: While port is active
    n a call, this feature prevents any
    rcoming tones associated with other
    ystem features from interrupting the call
    .CD Speakerphone Dlsplay of Costed
    :alls: When call costing is being
    employed with the system, an LCD
    ipeakerphone can be programmed to
    lisplay the cost of a call as it Is made
    mm the station.
    INTRY CODE AND PROMPTING DISPLAY
    I. Dial 53.“STATION FEATURES*
    3. Dial 26.“DATA SECURE PORT”
    3. Select station port for programming:
    - Station 10 - 57: Dial 10 - 57.
    t. Dial % for next station feature.
    -OR-
    Dial +# f for configuration mode.
    I. Dial 63.“STATION FEATURES”
    3. Dial 27.“LCD CALL COST”
    3. Select station ports for programming:
    - Station 10 - 57: Dial 10 - 57.
    1. Dial * for next station feature.
    -OR-
    Dial * * for configuration mode.
    PORT!ENTRY !PORT! FNTRYI
    233955
    244056
    25
    4157
    DEFAULT 
    = NONE ASSIGNED21 
    !137 I153 I
    136 !54 !
    PORf ENTRY PORT’ ENTRY PORT ENTRY
    11
    136 1152 I37 
    !53 !I223654
    23
    3955
    244056
    25
    4157
    DEFAULT = NOT ASSIGNED
    IPress SPKR to end.I 
    						
    All Comdial manuals Comments (0)

    Related Manuals for Comdial DIGITECH Digital Telephone System Instructions Manual