Home > Canon > Printer > Canon Pixma Mp540 User Guide

Canon Pixma Mp540 User Guide

    Download as PDF Print this page Share this page

    Have a look at the manual Canon Pixma Mp540 User Guide online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 1335 Canon manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.

    Page
    of 758
    							 
    *1 Use the special SD Card Adapter.
    *2 Requires purchase of a separate compact flash card adapter for xD-Picture Card.
    *3 Use the special card adapter.
    *4 Use the special Duo size adapter. 
     Printable Image Data 
    This machine accepts images taken with a camera compliant with the Design rule for Camera File
    system (Exif 2.2/2.21 compliant), TIFF (Exif 2.2/2.21 compliant). Other image or movie types such as
    RAW images cannot be printed.
     Inserting the Memory Card 
     Caution
     When a memory card is inserted into the Card Slot, the Access lamp is lit. When the Access lamp
    is flashing, the machine is accessing the memory card. In this case, do not touch the area aroundthe Card Slot.
     Note
     When Writable from PC is selected in Read/write attribute of Advanced settings under Device
    settings in the Settings menu, you cannot print image data on the memory card or save scanned
    data on the memory card using the Operation Panel on the machine. After using the Card Slot as the
    memory card drive of a computer, remove the memory card and be sure to set Read/write attribute
    to Not writable from PC. For details, refer to the on-screen manual: Advanced Guide.
     When you use a computer to edit or enhance photos saved on a memory card, be sure to print them
    from the computer. If you use the Operation Panel, the photos may not be printed properly.
    1.Prepare your memory card.
    Attach a special card adapter if your memory card requires one.
    See Memory Cards that Require a Card Adapter.
    2.Turn on the power, and open the Card Slot Cover.
    3.Insert only one memory card into the Card Slot.
    The location to insert a memory card varies depending on each type of memory card. Insert your memory cardstraightforward WITH THE LABELED SIDE FACING TO THE LEFT into the Card Slot, according to the insert
    location in the figure below.
    When the memory card is inserted properly, the Access lamp (A) will light up.
    Be sure to attach the card adapter to the memory card with the mark  (asterisk) below, and then insert it intothe Card Slot.
    Page 21 of 758 pages Inserting the Memory Card
     
    						
    							For Memory Stick Duo, Memory Stick PRO Duo, or Memory Stick Micro:
    For SD Secure Digital memory card, SDHC memory card, miniSD Card, miniSDHC Card, microSD
    Card, microSDHC Card, Memory Stick, Memory Stick PRO, MultiMediaCard (ver.4.1),
    MultiMediaCard Plus (ver.4.1), or RS-MMC (ver.4.1):
    For Compact Flash (CF) Card, Microdrive, xD-Picture Card, xD-Picture Card Type M, or xD-Picture
    Card Type H:
     Caution
     Part of the memory card will stick out of the Card Slot, but do not force it into the slot any
    further. This can damage the machine or the memory card.
     Make sure that the memory card is correctly oriented before inserting it into the Card Slot. If
    you force the memory card into the Card Slot in the wrong orientation, the memory card or the
    machine can be damaged.
     Important
     Do not insert more than one memory card at a time.
    4.Close the Card Slot Cover.
     Removing the Memory Card 
     Important
     If you used the Card Slot as the memory card drive of a computer, you must perform the safe
    removal operation on your computer before physically removing the memory card from themachine.
    - In Windows, right-click the removable disk icon and click Eject. If Eject does not appear on the
    screen, make sure that the Access lamp is lit, and then remove the memory card.
    - In Macintosh, drag 
     (Mount drive) into the Trash.
    1.Open the Card Slot Cover.
    Page 22 of 758 pages Inserting the Memory Card
     
    						
    							2.Make sure that the 
    Access lamp is lit, and remove the memory card.
    Hold the part of the memory card that is sticking out and remove it from the machine straightforward.
     Caution
     Do not remove the memory card while the Access lamp is flashing. The Access lamp flashes
    while the machine is reading or writing data from/to the memory card. If you remove the
    memory card or turn off the power while the Access lamp is flashing, the data saved on the
    memory card can be damaged.
    3.Close the Card Slot Cover.
          
    Page top
    Page 23 of 758 pages Inserting the Memory Card
     
    						
    							Advanced Guide  Troubleshooting
    Contents > Copying
    Copying 
    You can copy in the various methods such as enlarging/reducing or copying two original pages onto a
    single sheet of paper.
    Making Copies
    Setting Items
    Using Various Copy Functions
          
    Page top
    Page 24 of 758 pages Copying
     
    						
    							Advanced Guide  Troubleshooting
    Contents > Copying > Making Copies
    Making Copies 
    This section describes the basic operation, using the settings to copy a document of A4 size on plain
    paper as an example.
    For the operation, see the notes and operation procedure described in the reference page.
    You need to prepare:
    Originals to copy. See Originals You Can Load.
    Paper for printing. See Media Types You Can Use.
    1.Prepare for copying.
    (1) Turn on the power.
    See Operation Panel.
    (2) Load paper.
    See Loading Paper.
    Page 25 of 758 pages Making Copies
     
    						
    							Here we load A4 plain paper in the Cassette.
     Note
     Load A4, B5, A5, or Letter-sized plain paper in the Cassette. Load other sizes or types of
    paper in the Rear Tray.
    (3) Open the Paper Output Tray gently, and open the Output Tray Extension.
    (4) Make sure that Copy is selected on the HOME screen, and press the OK
    button.
    See Selecting Menus on the HOME Screen.
    (5) Load an original on the Platen Glass.
    Load the original with the side to copy FACING DOWN and align it with the alignment mark as shown below.
    See Loading Originals to Copy or Scan.
    2.Start copying.
    (1) Confirm the page size, media type, magnification, etc.
    Here we confirm that 100% is selected for Magnification, A4 for Page size, and Plain paper for Media type.
    To change the settings, use the Easy-Scroll Wheel or the  (Up) or  (Down) button to select the item to
    change, and press the OK button.
    See Selecting Setting Items and Setting Items.
     Note
     When Plain paper is selected for Media type and A4, B5, A5, or 8.5x11 (LTR) for Page
    size, Cassette appears for Paper source.
    When other sizes or types of paper are selected, Rear tray appears.
    Confirm that the selected paper is loaded in the correct paper source.
     You can check the preview of print result if you press the right Function button (B) to
    select Preview.
    Page 26 of 758 pages Making Copies
     
    						
    							Refer to the on-screen manual: Advanced Guide.
     You can select various copy functions, such as Borderless copy, 2-on-1 copy, and Frame
    erase, if you press the left Function button (A) to select Special copy.
    See Using Various Copy Functions.
    (2) Press the [+] or [-] button to specify the number of copies.
    (3) Press the Color button for color copying, or the Black button for black & white
    copying.
    The machine starts copying.
    Remove the original on the Platen Glass after copying is completed.
     Important
     Do not open the Document Cover or move the loaded original until copying is completed.
     Note
     Press the Stop button to cancel copying.
     Repeat the procedures from (5) in step 1 to copy another original.
    You can exit the Copy menu and select another menu if you press the HOME button.
     Setting Items 
    (1) Magnification
    Specify the enlargement/reduction manner. You can specify the copy scale by selecting the optional
    number or the page size: A4 to 8.5x11, A4 to B5, etc. If you do not want to enlarge/reduce the page size,
    select 100%. For details, refer to the on-screen manual: Advanced Guide.
    (2) Intensity
    Specify the intensity when you want to make the darkened/lightened copy. You can also set the intensity to
    automatically adjust according to the original. For details, refer to the on-screen manual: Advanced Guide.
    (3) Page size
    Select the page size of the paper to print: A4, 8.5x11 (LTR), etc.
    (4) Media type
    Select the media type of the paper to print: Plain paper, Plus Glossy II, etc.
     Note
     If you do not select the page size and media type correctly, the machine may feed paper
    from the wrong paper source or may not print with the proper print quality.
    See Paper Source to Load Paper.
    (5) Print quality 
    Adjust the print quality according to the original to copy: High(quality-priority), Standard, etc. The available
    print quality settings depend on the paper selected in Media type.
    (6) Paper source
    The paper source for the selected page size and media type appears on the screen.
    When A4, B5, A5, or Letter-sized plain paper is selected, Cassette appears.
    When other sizes or types of paper are selected, Rear tray appears.
    Confirm that the selected paper is loaded in the paper source displayed on the screen.
    For details on the paper source setting, refer to the on-screen manual: Advanced Guide.
     Note
     The settings of the page size, media type, print quality, automatic intensity, etc. are retained,
    and these settings will appear next time when the Copy menu is selected even if the power is
    Page 27 of 758 pages Making Copies
     
    						
    							turned off and on.
     Combination of some items cannot be specified depending on the function.
     If you select Fast (speed-priority) with the media type set to Plain paper and the quality is not
    as good as expected, select Standard or High(quality-priority) and then try copying again.
     When you make black & white copies by pressing the Black button, select High(quality-
    priority) for the print quality to copy in grayscale. Grayscale renders tones in a range of grays
    instead of black or white.
          
    Page top
    Page 28 of 758 pages Making Copies
     
    						
    							Advanced Guide  Troubleshooting
    Contents > Copying > Using Various Copy Functions
    Using Various Copy Functions 
    You can make a copy using various functions if you press the left Function button to select Special copy
    at the bottom of the Copy screen.
    For details, refer to the on-screen manual: Advanced Guide.
     
    Borderless copy 
    2-on-1 copy
    4-on-1 copy
    Image repeat Frame erase
    TrimmingMasking
          
    Page top
    Page 29 of 758 pages Using Various Copy Functions
     
    						
    							Advanced Guide  Troubleshooting
    Contents > Printing Photos from Printed Photos
    Printing Photos from Printed Photos 
    You can reprint printed photos in various layouts.
    Reprinting Printed Photos
    Using Various Functions
    Printing Photos in Various Layouts
    Correcting Images
          
    Page top
    Page 30 of 758 pages Printing Photos from Printed Photos
     
    						
    All Canon manuals Comments (0)

    Related Manuals for Canon Pixma Mp540 User Guide