Xerox WorkCentre M20i User Manual

							Xerox CopyCentre C20, WorkCentre M20 and WorkCentre M20i User Guide Page 2-7
Getting Started
Control Panel Overview
ITEMDESCRIPTION
Alphabet KeyboardUse to enter alpha and symbol characters for the E-mail and Fax functions. 
Lighten/DarkenUse to adjust the contrast level to improve output quality.
Reduce/EnlargeUse to adjust copy size from 25% to 400% when using the Document 
Glass, and 25% to 100% using the Document Feeder.
2 SidedUse to scan 2 Sided originals and produce 2 Sided output.
CollatedUse to produce collated output.
Original TypeUsed to select the type of original being scanned.
Color OriginalUse this option when scanning a color original.
ResolutionUse to adjust the scan resolution.
CopySelect to activate the Copy mode. The Copy key illuminates when selected.
FaxSelect to activate the Fax mode. The Fax key illuminates when selected. 
(WorkCentre M20i only.)
E-mailSelect to activate the E-mail mode. The E-mail key illuminates when 
selected. 
Menu/ExitUse to access the menu functions and also to move up through the menu 
levels.
EnterUse to confirm the selection on the display.
Display
Alphabet
KeyboardStatus MapNumeric
Keypad
Feature
keys (1 - 7) Copy, Fax and Email keys
Paper Supply
Navigation keys
1
2
3
4
5
67
Start
Stop Interrupt Clear / Clear All (AC)
Menu/Exit
Enter
Status keys
Fax
Functions
1
2
3
4
5
6
7
Downloaded From ManualsPrinter.com Manuals 
						

							Page 2-8  Xerox CopyCentre C20, WorkCentre M20 and WorkCentre M20i User Guide 
Getting Started
Navigation KeysUse to scroll through the menu items and the options available for each 
menu item.
Paper SupplyUse to select a paper type and source. Each press of the Paper Supply key 
changes the selection. The Status Map indicates the selected tray.
NOTE:Paper Tray 2 is available as an option.
Status MapThe Status Map identifies which paper tray is selected, when a paper tray is 
empty and when an error occurs.
The Status Map has a light for each paper tray. A paper tray can be 
selected using the Paper Supply key. Each time the key is pressed, a 
different tray is selected and a green light displays to indicate the selected 
tray. When two tray lights display together, the Auto Tray Switching feature 
is active. This enables the machine to switch to a different tray if the current 
tray runs out of paper.
If a paper tray is empty, the light will flash and if enabled, an error tone will 
sound.
If an error occurs, a red light displays indicating the location of the error, 
and a message appears on the display providing further information.
)For a detailed description of the error messages, refer to “LCD Error 
Messages” on page 11-11.
DisplayDisplays the current status and the menu prompts and selections.
Job StatusUse to view the current job status, add pages to jobs in memory and to 
delete jobs.
Machine StatusUse to access setup menus and customise the machine.
Manual GroupUse to manually enter multiple destinations for a fax job. (WorkCentre M20i 
only.)
Manual DialUse to dial a fax number manually. (WorkCentre M20i only.)
Speed DialUse to dial fax numbers and send faxes by entering a Speed Dial number 
which has been set up previously and stored in the machine’s Dial 
Directory. (WorkCentre M20i only.)
Pause/RedialUse to redial the last phone number called or to add a pause when storing a 
number in the dial directory. (WorkCentre M20i only.)
Numeric KeypadUse to enter alphanumeric characters.
Document 
Feeder Error
Paper 
JamBypass
Tray 2 Tray 1
Downloaded From ManualsPrinter.com Manuals 
						

							Xerox CopyCentre C20, WorkCentre M20 and WorkCentre M20i User Guide Page 2-9
Getting Started
InterruptUse to interrupt the current copy job to run a more urgent job.
StartUse to activate a job.
StopUse to stop an operation at any time.
Clear/Clear All (AC)Press once to clear a current entry e.g. an incorrect number or character 
entry. Press twice to clear all programmed settings, the display requests 
confirmation.
Downloaded From ManualsPrinter.com Manuals 
						

							Page 2-10  Xerox CopyCentre C20, WorkCentre M20 and WorkCentre M20i User Guide 
Getting Started
Installing Drum and Toner Cartridges
1¾Pull the release latch to open the 
side cover.
CAUTION: Ensure the side cover 
is always open before opening 
the front cover.
2¾Open the front cover.
3¾If the cartridge locking lever is in 
the lower position, turn the lever 
upward until it locks into place.
Downloaded From ManualsPrinter.com Manuals 
						

							Xerox CopyCentre C20, WorkCentre M20 and WorkCentre M20i User Guide Page 2-11
Getting Started
zXerox 
has included a 
Starter Toner 
Cartridge. 
Purchased 
replacement 
toner cartridges 
will yield 
approximately 
two times the 
number of copies.
zWhen the drum or 
toner cartridge 
need to be 
replaced a 
message 
displays.
4¾Remove the drum cartridge from 
its bag and slide it into the 
machine firmly until it locks into 
place.
CAUTION: Do not expose the 
green drum to light for an 
extended period. Never expose 
the drum to direct sunlight or 
touch the drum surface. Damage 
or poor image quality may result.
5¾Remove the starter toner 
cartridge from its bag. 
¾Gently shake the cartridge to 
loosen the toner.
Shaking the cartridge will ensure 
maximum copies per cartridge.
6¾Slide the toner cartridge into the 
machine, aligning the cartridge to 
the left of the slot, until it locks 
into place.
7
¾Turn the toner locking lever 
downwards until it locks in place.
¾Close the front cover and the side 
cover.
The product returns to Standby 
mode.
Downloaded From ManualsPrinter.com Manuals 
						

							Page 2-12  Xerox CopyCentre C20, WorkCentre M20 and WorkCentre M20i User Guide 
Getting Started
Making Connections
Document Feeder
Telephone Line (WorkCentre M20i only)
zYou should use 
the telephone line 
cord which is 
supplied with your 
machine. If you 
are replacing it 
with another 
vendor’s, it 
should be AWG 
#26 or larger tele-
communication 
line cord.
1
¾Connect the Document Feeder 
cord to the port shown and fasten 
the side screws.
2
¾Connect the supplied telephone 
line to the LINE jack and the other 
end to the wall jack.
If you want to use your machine 
for receiving both faxes and voice 
calls, you will need to connect a 
telephone and/or answering 
machine.
¾If required, plug the cord of your 
extension phone into the EXT 
jack.
Downloaded From ManualsPrinter.com Manuals 
						

							Xerox CopyCentre C20, WorkCentre M20 and WorkCentre M20i User Guide Page 2-13
Getting Started
USB or Parallel Port Cable
(WorkCentre M20 and M20i only)
)Only connect one of the above cables. If you are using a USB cable, you must be running 
Windows 98, Me, 2000 or XP. When using the USB connection, your machine provides two USB 
modes; Fast and Slow. Fast is the default mode. Some PC User’s may experience poor 
functionality in the default mode. If this occurs, select the Slow mode. For information about 
changing the USB mode, refer to “Machine Setup” on page 2-19.
3
CAUTION: Shut down the 
computer before connecting the 
cable.
¾Connect the USB Cable which 
came with your machine.
OR
¾If you want to use a parallel print 
cable, only use an IEEE-1284 
compliant cable and connect it to 
the parallel connector on your 
machine.
Downloaded From ManualsPrinter.com Manuals 
						

							Page 2-14  Xerox CopyCentre C20, WorkCentre M20 and WorkCentre M20i User Guide 
Getting Started
Powering On the Machine
1
¾Connect the AC Power Cord to 
the machine and a power outlet. 
The power cord must be plugged 
into a grounded power socket.
2
¾Press the ON/OFF switch to the 
ON ( I ) position. 
The machine displays ’Warming 
Up Please Wait...’.
Downloaded From ManualsPrinter.com Manuals 
						

							Xerox CopyCentre C20, WorkCentre M20 and WorkCentre M20i User Guide Page 2-15
Getting Started
Loading Paper
zAn additional 
Paper Tray is 
available as an 
option. The 
instructions for 
loading both 
paper trays are 
the same.
1
¾Pull open the Paper Tray.
2¾Push down on the pressure plate 
until it locks into position.
3¾Adjust the rear paper guide to the 
required paper length.
It is preset to A4 or Letter size 
depending on country.
¾To load another size, lift the rear 
guide out of the current position 
and into the required position.
LThe Paper Trays can hold a 
maximum of 550 sheets of 80 g/m2 
(20 lb) plain paper. You can use 
A4, Letter or Legal size paper only.
Rear 
Guide
Downloaded From ManualsPrinter.com Manuals 
						

							Page 2-16  Xerox CopyCentre C20, WorkCentre M20 and WorkCentre M20i User Guide 
Getting Started
zIf you experience 
problems with 
paper feed, turn 
the paper around 
and if the problem 
continues, use 
the Bypass Tray. 
4
¾Fan the paper and insert it into 
the tray.
If loading Letterhead, ensure the 
design is face-up and the top 
edge of the sheet is placed at the 
right side.
5
Corner 
snubbers
¾Ensure that the paper is 
positioned under the snubbers.
¾Do not fill above the Maximum Fill 
Line.
Max Fill
Line
Downloaded From ManualsPrinter.com Manuals