Samsung Xpress C460W Manual
Have a look at the manual Samsung Xpress C460W Manual online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 1705 Samsung manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.
Wireless network setup 1712. Using a Network-Connected Machine 6 Select Using a direct wi reless connection on the Select the Wireless Setup Method screen. Then, click Next. Even if your computer is running Windows 7 or higher, you cannot use this feature if your PC does not support wireless network. Set the wireless network using a USB cable (see "Access point via USB cable" on page 166). If below screen appears, press the (WPS) button from the control panel within 2 minutes. 7 When the wireless network set up is completed, click Next. 8 Follow the instructions in the installation window.
Wireless network setup 1722. Using a Network-Connected Machine Ad hoc via USB cable If you do not have an access point (AP), yo u may still connect the machine wirelessly to your computer by setting up an ad-hoc wireless network by following the si mple steps below. Items to prepare • Network-connected computer • Software CD that was pr ovided with your machine • A machine installed with a wireless network interface • USB cable Creating the ad hoc network in Windows 1Turn on your computer and the wireless network machine. 2 Insert the supplied software CD into your CD-ROM drive. If the installation window does not appear, click Start > All programs > Accessories > Run . X:\ Setup.exe replacing “X” with the lette r, which represents your CD- ROM drive and click OK . 3 Review and accept the installation agreemen ts in the installation window. Then, click Next.
Wireless network setup 1732. Using a Network-Connected Machine 4 Select Wireless network connection on the Printer Connection Type screen. Then, click Next. 5 On the Are you setting up your pr inter for the first time? screen, select Yes, I will set up my pr inter's wireless network. Then, click Next. If your printer is already co nnected on the network, select No, my printer is already connected to my network. 6 Select Using a USB cable on the Select the Wireless Setup Method screen. Then, click Next. 7 After searching the wire less networks, a list of wireless networks your machine has searched appears. Click Advanced Setting. •Enter the wireless Network Name: Enter the SSID name you want (SSID is case-sensitive). • Operation Mode: Select ad hoc. • Channel: Select the channel. ( Auto Setting or 2412 MHz to 2467 MHz). • Authentication: Select an authentication type. Open System: Authentication is not used, and encryption may or may not be used, depending on the need for data security. Shared Key: Authentication is used. A device that has a proper WEP key can access the network. • Encryption: Select the encryption (None, WEP64, WEP128). • Network Password: Enter the encryption network password value. • Confirm Network Password: Confirm the encryption network password value. • WEP Key Index: If you are using WEP Encryption, select the appropriate WEP Key Index . The wireless network security window appears when the ad hoc network has security enabled. Select Open System or Shared Key for the authentication and click Next. • WEP (Wired Equivalent Privacy) is a security protocol preventing unauthorized access to your wirele ss network. WEP encrypts the data portion of each packet exchanged on a wireless network using a 64-bit or 128-bit WEP encryption key.
Wireless network setup 1742. Using a Network-Connected Machine 8 The window showing the wireless network setting appears. Check the settings and click Next. Before entering the IP address for the machine, you must know the computer’s network configuration info rmation. If the computer’s network configuration is set to DHCP, the wireless network setting should also be DHCP. Likewise, if the computer’s networ k configuration is set to Static, the wireless network setting should also be Static. If your computer is set to DHCP and you want to use the Static wireless network setting, you must contact th e network administrator to get the static IP address. • For the DHCP method If the IP address assignment method is DHCP, check if DHCP is shown in the Wireless Network Setting Confirm window. If it shows Static, click Change TCP/IP to change the assignment method to Receive IP address automatically (DHCP) . • For the Static method If the IP address assignment method is Static, check if Static is shown in the Wireless Network Setting Confirm window. If it shows DHCP, click Change TCP/IP to enter the IP address and other network configuration values for the machine. For example, If the computer’s network info rmation is as shown follows: - IP address: 169.254.133.42 - Subnet Mask: 255.255.0.0 Then, the machine’s network info rmation should be as below: - IP address: 169.254.133. 43 - Subnet Mask: 255.255.0.0 (Use the computer’s subnet mask.) - Gateway: 169.254.133. 1 9 The Wireless Network Setting Complete window appears. Click Next. 10 When the wireless network settings are completed, disconnect the USB cable between the computer and machine. Click Next. 11 Follow the instructions in the installation window.
Wireless network setup 1752. Using a Network-Connected Machine 16 Setup using Mac Access point via USB cable Items to prepare • Access point • Network-connected printer • Software CD that was provided with your machine • A machine installed with a wireless network interface • USB cable 1Make sure that the machine is connected to your computer and powered on. 2 Insert the supplied software CD into your CD-ROM drive. 3 Double-click the CD-ROM icon that appears on your Mac desktop. • For Mac OS X 10.8, double-cli ck the CD-ROM that appears on Finder. 4 Double-click the MAC_Installer folder > Installer OS X icon. 5 Click Continue . 6 Read the license agreement and click Continue. 7 Click Agree to agree to the license agreement. 8 Click Install. All components necessary for machine operations will be installed. If you click Customize , you can choose individual components to install. 9 Enter the password and click OK.
Wireless network setup 1762. Using a Network-Connected Machine 10 Select Configuration of Wireless network on the Printer Connection Type and click Continue . 11 If Wireless Settings screen appears, select Using a USB cable and click Next . If the screen does not appear, go to step 15.
Wireless network setup 1772. Using a Network-Connected Machine 12 After searching, the window shows the wireless network devices. Select the name (SSID) of the access p oint you want to use and click Next. When you set the wireless co nfiguration manually, click Advanced Setting . • Enter the wireless Network Name: Enter the SSID of the access point (SSID is case-sensitive). • Operation Mode: Select Infrastructure . • Authentication: Select an authentication type. Open System: Authentication is not used, and encryption may or may not be used, depending on the need for data security. Shared Key: Authentication is used. A device that has a proper WEP key can access the network. WPA Personal or WPA2 Personal: Select this option to authenticate the print server based on the WPA Pre-Shar ed Key. This uses a shared secret key (generally called Pre Shared Ke y pass phrase) that is manually configured on the access point and each of its clients. • Encryption: Select the encryption. (None, WEP64, WEP128, TKIP, AES, TKIP, AES) • Network Password: Enter the encryption network password value. • Confirm Network Password: Confirm the encryption network password value. • WEP Key Index: If you are using WEP Encryption, select the appropriate WEP Key Index . The wireless network security window appears when the access point has security enabled. Enter the Network Password of the access point (or router). 13 The window showing the wireless n etwork setting appears. Check the settings and click Next. • Wi-Fi Direct option appears on the screen only if your printer supports this feature. • Can start to build Wi-Fi Direct by using Samsung Easy Printer Manager (see "Setting up Wi-Fi Direct" on page 186). • Wi-Fi Direct Name : The default Wi-Fi Direct Name is the model name and the maximum length is 22 characters. • Password setting is the numeric string, and the size is 8 ~ 64 characters. 14 The Wireless Network Setting Complete window appears. Click Next. 15 When the wireless network settings are completed, disconnect the USB cable between the computer and machine. Click Next.
Wireless network setup 1782. Using a Network-Connected Machine Access point without a USB cable (recommended) Items to prepare • WiFi-enabled Mac running Mac OS 10.7 or higher and an access point (router) • Software CD that was pr ovided with your machine • A machine installed with a wireless network interface 1Make sure that the machine is connected to your computer and powered on. 2 Insert the supplied software CD into your CD-ROM drive. 3 Double-click the CD-ROM icon that appears on your Mac desktop. • For Mac OS X 10.8, double-click the CD-ROM that appears on Finder. 4 Double-click the MAC_Installer folder > Installer OS X icon. 5 Click Continue. 6 Read the license ag reement and click Continue. 7 Click Agree to agree to the license agreement. 8 Click Install. All components necessary for machine operations will be installed. If you click Customize , you can choose individual components to install. 9 Enter the password and click OK. 10 Select Configuration of Wireless network on the Printer Connection Type and click Continue .
Wireless network setup 1792. Using a Network-Connected Machine 11 If Wireless Settings screen appears, select Using a direct wireless connection and click Next. If the screen does not appear, go to step 13. If below screen appears, press the (WPS) button from the control panel within 2 minutes. 12 When the wireless network set up is completed, click Next. 13 After the installation is finished, click Close.
Wireless network setup 1802. Using a Network-Connected Machine Ad hoc via USB cable If you do not have an access point (AP), yo u may still connect the machine wirelessly to your computer by setting up an ad hoc wireless network by following these simple directions. Items to prepare • Network-connected computer • Software CD that was pr ovided with your machine • A machine installed with a wireless network interface • USB cable Creating the ad hoc network in Mac 1Make sure that the machine is connected to your computer and powered on. 2 Insert the supplied software CD into your CD-ROM drive. 3 Double-click the CD-ROM icon that appears on your Mac desktop. • For Mac OS X 10.8, double-cli ck the CD-ROM that appears on Finder. 4 Double-click the MAC_Installer folder > Installer OS X icon. 5 Click Continue . 6 Read the license agreement and click Continue. 7 Click Agree to agree to the license agreement. 8 Click Install. All components necessary for machine operations will be installed. If you click Customize , you can choose individual components to install. 9 Enter the password and click OK.