Samsung Xpress C460W Manual
Have a look at the manual Samsung Xpress C460W Manual online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 1705 Samsung manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.
Understanding display messages 1114. Troubleshooting 11 Misc. messages MessageMeaningSuggested solutions Adjusting Color RegistrationThe machine is adjusting the color registration. Wait a few minutes. Calibrating image density…The machine is calibrating the image density. Wait a few minutes. Door Open Close itThe cover is not securely latched. Close the cover until it locks into place. Scan Unit Open or Exit JAMThe scan unit is not securely latched or paper has jammed in the scanner area. • Clear the jam (see "Clearing original document jams" on page 96). • Close the cover until it locks into place. Door of scanner is open. The cover of scanner is not securely latched. Close the cover until it locks into place. Error [error number] Install [color] toner The indicated toner cartridge is installed improperly, or the connector is polluted. Reinstall the Samsung- genuine toner cartridge two or three times to confirm it is seated properly. Or clean the connector. If the problem persists, contact the service representatives. Error [error number] Turn off then on The machine unit cannot be controlled. Reboot the power and try the printing job again. If the problem persists, please call for service. Error [error number] Call for service Scanner Locked The scanner is locked. Reboot the power. If the problem persists, please call for service. Install TR. belt unit.The transfer belt is not installed. Install a Samsung- genuine transfer belt. Not compatible transfer beltThe transfer belt of the machine is not for your machine. Install the a Samsung- genuine part designed for your machine. Not installed Waste tank The waste toner container is not installed. Install a Samsung- genuine waste toner container. MessageMeaningSuggested solutions
Understanding display messages 1124. Troubleshooting Check Fax LineThe fax line is not properly connected to the LINE port. Connect the fax line to the LINE port not to the EXT port (see "Rear view" on page 22). Not proper room temp. Move setThe machine is in a room with improper room temperature. Move the machine to a room with proper room temperature. Output bin Full Remove paper The output tray is full. Or the sensor is not facing down. Remove papers from the output tray, the machine resumes printing. Or make sure the sensor is facing down. If the problem persists, call for service. Prepare new Transfer beltThe life of the transfer belt will expired soon. Replace the transfer belt with a new one. Contact the service representatives. Replace new Transfer beltThe life of the transfer belt has expired. Replace the transfer belt with a new one. Contact the service representatives. Transfer Belt Error The transfer belt cannot be controlled. Reboot the power and try the printing job again. If the problem persists, please call for service. MessageMeaningSuggested solutions Prepare new Transfer rollerThe life of the transfer belt will expired soon. Replace the transfer belt with a new one. Contact the service representatives. Replace new Transfer rollerThe life of the transfer belt has expired. Replace the transfer belt with a new one. Contact the service representatives. Replace Fuser SoonThe life of the fuser unit will be expired soon. Replace the fuser unit with a new one. Contact the service representatives. Replace new Fuser unitThe life of the fuser unit will be expired. Replace/Install Waste Toner Tank The life span of the waste toner container has expired and the printer will stop printing until a new waste toner container is placed into the printer. Replace a waste toner container with a Samsung-genuine waste toner container. MessageMeaningSuggested solutions
Understanding display messages 1134. Troubleshooting Prepare new Imaging unitThe life of the imaging unit will be expired soon. Replace the imagingunit with a new one. Contact the service representatives. Replace with new imaging unitThe life of the imaging unit will be expired. Install imaging unitThe imaging unit is not installed Error [error number] Door open/close The imaging unit is installed improperly, or the cover is not securely latched. Reinstall the imaging unit to confirm it is seated properly. Close the cover until it locks into place. MessageMeaningSuggested solutions
5. Appendix This chapter provides product specifications and information concerning applicable regulations. • Specifications 115 • Regulatory information 124 • Copyright 137
1155. Appendix Specifications 1 General specifications The specification values listed below are subject to change without notice. See www.samsung.com for possible changes in information. ItemsDescription DimensionWidth x Length x Height C46xW 406 x 362 x 288.6 mm (16 x 14.3 x 11.4 inches) C46xFW 406 x 362 x 333.5 mm (16 x 14.3 x 13.1 inches) WeightMachine with consumablesC46xW 12.80 Kg (28.22 lbs) C46xFW 13.96 Kg (30.78 lbs) Noise LevelabReady modebackground noise level Print modeColor printing Less than 46 dB (A) Black and white printing Less than 48 dB (A) Copy modeScanner glass Less than 52 dB (A) Document feeder Less than 53 dB (A) Scan modeScanner glass Less than 51 dB (A) Document feeder Less than 51 dB (A) TemperatureOperation10 to 30°C (50 to 86°F) Storage (packed)-20 to 40°C (-4 to 104°F)
Specifications 1165. Appendix HumidityOperation20 to 80% RH Storage (packed)10 to 90% RH Power ratingc110 volt modelsAC 110 - 127 V 220 volt modelsAC 220 - 240 V Power consumption dAverage operating modeLess than 290 W Ready modeLess than 60 W Power save mode •C46xW: Less than 1.7 W (Wi-Fi Direct on: Less than 2.5 W) • C46xFW: Less than 2.1 W (Wi-Fi Direct on: Less than 2.9 W) Power off mode eLess than 0.45 W Network Standby Mode (All Port Activation) • C46xW: Less than 2.48 W • C46xFW: Less than 2.55 W WirelessfModule SPW-B4319S a. Sound Pressure Level, ISO 7779. Conf iguration tested: basic machine installation, A4 paper, simplex printing. b. China only: If the equipment's noise is louder than 63 db (A), the equipment should be placed in region of relatively indepen dent advice. c. See the rating label on the machine for the correct voltage (V), frequency (hertz) and of current (A) for your machine. d. The power consumption may be a ffected by the machine’s status, setting condit ions, operating environment, and measuring equipment and method the country uses. e. Power consumption can be completely avoided only when the power cable is not connected. f. Wireless models only (see "Fea tures by model" on page 7). ItemsDescription
Specifications 1175. Appendix 2 Print media specifications TypeSizeDimensions Print media weight/Capacitya Tray Plain paper Letter 216 x 279 mm (8.5 x 11 inches) 60 to 85 g/m 2 (16 to 23 lbs bond) • 150 sheets of 75 g/m 2 (20 lbs bond) Legal 216 x 356 mm (8.5 x 14 inches) US Folio 216 x 330 mm (8.5 x 13 inches) A4 210 x 297 mm (8.27 x 11.69 inches) Oficio 216 x 343 mm (8.5 x 13.5 inches) JIS B5 182 x 257 mm (7.17 x 10.12 inches) ISO B5 176 x 250 mm (6.93 x 9.84 inches) Executive 184 x 267 mm (7.25 x 10.5 inches) A5 148 x 210 mm (5.83 x 8.27 inches) A6 105 x 148 mm (4.13 x 5.83 inches) Thick paper Refer to the Plain paper section Refer to the Plain paper section 86 to 120 g/m 2 (23 to 32 lbs bond) • 5 sheets Thin paper Refer to the Plain paper section Refer to the Plain paper section 60 to 70 g/m 2 (16 to 19 lbs bond) • 150 sheets of 60 g/m 2 (16 lbs bond)
Specifications 1185. Appendix CottonRefer to the Plain paper section Refer to the Plain paper section 75 to 90 g/m 2 (20 to 24 lbs bond) • 150 sheets of 75 g/m 2 (20 lbs bond) Colored, Pre-printed, Recycled Refer to the Plain paper section Refer to the Plain paper section 60 to 85 g/m 2 (16 to 24 lbs bond) • 150 sheets of 75 g/m 2 (20 lbs bond) Labels b Letter, Legal, Oficio, US Folio, A4, JIS B5, ISO B5, Executive, A5 Refer to the Plain paper section 120 to 150 g/m2 (32 to 40 lbs bond) • 5 sheets Card stock Letter, Legal, Oficio, US Folio, A4, JIS B5, ISO B5, Executive, A5, Postcard 4x6 Refer to the Plain paper section 121 to 163 g/m 2 (32 to 43 lbs bond) • 5 sheets Bond paper Refer to the Plain paper section Refer to the Plain paper section 105 to 120 g/m 2 (28 to 32 lbs bond) • 10 sheets Archive Refer to the Plain paper section Refer to the Plain paper section 70 to 90 g/m 2 (18.6 to 24 lbs bond) • 100 sheets Glossy Photo, Matte Photo Letter, A4, Postcard 4x6 Refer to the Plain paper section 111 to 220 g/m 2 (30 to 58 lbs bond) • 1 sheets TypeSizeDimensions Print media weight/Capacitya Tray
Specifications 1195. Appendix If media weight is over 120 g/m2 (32 lbs bond), load a paper into the tray one by one. Minimum size (custom)76 x 152 mm (3 x 6 inches) 60 to 120 g/m2 (16 to 32 lbs bond) Maximum size (custom) 216 x 356 mm (8.5 x 14 inches) a. Maximum capacity may differ depending on media weight, thickness, and environmental conditions. b. The smoothness of the labels used in this machine is 100 to 250 (sheffield). This means the numeric level of smoothness. TypeSizeDimensions Print media weight/Capacitya Tray
Specifications 1205. Appendix 3 System requirements Microsoft® Windows® Operating system Requirement (recommended) CPURAMfree HDD space Windows® XPIntel® Pentium® III 933 MHz (Pentium IV 1 GHz) 128 MB (256 MB) 1.5 GB Windows Server® 2003 Intel® Pentium® III 933 MHz (Pentium IV 1 GHz) 128 MB (512 MB) 1.25 GB to 2 GB Windows Server® 2008 Intel® Pentium® IV 1 GHz (Pentium IV 2 GHz) 512 MB (2 GB) 10 GB Windows Vista®Intel® Pentium® IV 3 GHz512 MB (1 GB) 15 GB Windows® 7 Intel® Pentium® IV 1 GHz 32-bit or 64-bit processor or higher 1 GB (2 GB) 16 GB • Support for DirectX ® 9 graphics with 128 MB memory (to enable the Aero theme). •DVD-R/W Drive Windows Server® 2008 R2 Intel® Pentium® IV 1 GHz (x86) or 1.4 GHz (x64) processors (2 GHz or faster) 512 MB (2 GB) 10 GB Windows® 8 Intel® Pentium® IV 1 GHz 32-bit or 64-bit processor or higher 1 GB (2 GB) 16 GB • Support for DirectX ® 9 graphics with 128 MB memory (to enable the Aero theme). •DVD-R/W Drive