Samsung LN-S5797D Lcd Tv Owners Guide
Have a look at the manual Samsung LN-S5797D Lcd Tv Owners Guide online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 1705 Samsung manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.
English-39 Checking the Digital-Signal Strength Unlike analog channels, which can vary in reception quality from “snowy” to clear, digital (HDTV) channels have either perfect reception quality or you will not receive them at all. So, unlike analog channels, you cannot fine tune a digital channel. You can, however, adjust your antenna to improve the reception of available digital channels. 1 Press the MENUbutton. Press the or button to select “Channel”, then press the ENTERbutton. 2 Press the or button to select “Signal Strength”, then press the ENTERbutton. If the signal strength meter indicates that the signal is weak, physically adjust your antenna to increase the signal strength. Continue to adjust the antenna until you find the best position with the strongest signal. Select “Return” by pressing the or button, then press the ENTERbutton to return to the previous menu. Press the EXIT button to exit. Digital BN68-01047G-00Eng.qxd 4/26/06 5:37 AM Page 39
English-40 LNA (Low Noise Amplifier) If the TV is operating in a weak-signal area, sometimes the LNA function can improve the reception (a low-noise preamplifier boosts the incoming signal). 1 Press the MENUbutton. Press the or button to select “Channel”, then press the ENTERbutton. 2 Press the or button to select “LNA”, then press the ENTERbutton. 3 Press the or button to select “On” or “Off”, then press the ENTERbutton. Select “Return” by pressing the or button, then press the ENTERbutton to return to the previous menu. Press the EXITbutton to exit. The LNA setting must be made separately for each channel. If the picture is noisy with the LNA set to On, select Off. BN68-01047G-00Eng.qxd 4/26/06 5:37 AM Page 40
English-41 Picture Control You can select the type of picture which best corresponds to your viewing requirements. Picture Control 1 Press the MENUbutton. Press the or button to select “Picture”, then press the ENTERbutton. 2 Press the or button to select “Mode”, then press the ENTERbutton. Press the or button again to select “Mode”, then press the ENTERbutton. 3 Press the or button to select the desired picture mode (Dynamic, Standard, Movie, Custom), then press the ENTERbutton. Select “Return” by pressing the or button, then press the ENTERbutton to return to the previous menu. Press the EXITbutton to exit. Changing the Picture Standard • Choose “Dynamic” for viewing the TV during the day or when there is a bright light in the room. • Choose “Standard” for the standard factory settings. • Choose “Movie” when viewing the movie. • Choose “Custom” if you want to adjust the settings according to personal preference (see “Customizing the Picture Settings”, page 42). Alternate method Press the P.MODEbutton on the remote control repeatedly to select the desired picture mode. BN68-01047G-00Eng.qxd 4/26/06 5:37 AM Page 41
English-42 Customizing the Picture Settings You can use the on-screen menus to change the “Contrast”, “Brightness”, “Sharpness”, “Color”, “Tint”, and “Color Tone” according to personal preference. You can select “Standard” which automatically recalls your personalized picture settings. 1 Press the MENUbutton. Press the or button to select “Picture”, then press the ENTERbutton. 2 Press the or button to select “Mode”, then press the ENTERbutton. Press the or button again to select “Mode”, then press the ENTERbutton. 3 Press the or button to select the desired picture mode (Dynamic, Standard, Movie, Custom), then press the ENTERbutton. 4 Press the or button to select a particular option(Contrast, Brightness, Sharpness, Color, or Tint), then press the ENTERbutton. Press the or button to decrease or increase the value of a particular item. •While adjusting a picture option, you can also select another option (Contrast, Brightness, Sharpness, Color, or Tint) by pressing the or button.“Tint” doesn’t operate in HDMI or 480p Component or higher modes. The Tint cannot be adjusted while watching Digital TV. In PC mode, only the Contrast and Brightness can be selected. continued... BN68-01047G-00Eng.qxd 4/26/06 5:37 AM Page 42
English-43 5 Press the ENTERbutton to return to “Mode”. Press the or button to select “Color Tone”, then press the ENTERbutton. 6 Press the or button to select a particular item (Cool2, Cool1, Normal, Warm1, or Warm2), then press the ENTERbutton. 7 To return the factory defaults, select “Reset” by pressing the or button. Press the ENTERbutton. Press the or button to select “OK” or “Cancel”, then press the ENTERbutton. Select “Return” by pressing the or button, then press the ENTERbutton to return to the previous menu. Press the EXITbutton to exit. •If you set “Reset” to “OK”, the previously adjusted settings will be reset to the factory defaults. The reset function must be set separately for each mode (Dynamic, Standard, Movie, or Custom). Resetting the Picture Settings to the Factory Defaults BN68-01047G-00Eng.qxd 4/26/06 5:37 AM Page 43
English-44 Changing the Picture Size You can select the picture size which best corresponds to your viewing requirements. 1 Press the MENUbutton. Press the or button to select “Picture”, then press the ENTERbutton. Press the or button to select “Size”, then press the ENTERbutton. 2 Press the or buttons to select the screen format you want. Press the ENTERbutton. Press the EXITbutton to exit. 3 Press the or buttons to select “Zoom1”. Press the ENTERbutton. 4 After selecting Position, use the or button to magnify or reduce the picture size in a vertical direction. Press the EXITbutton to exit. You can select only the 16:9, 4:3 and Wide Fit screen sizes in the DTV Component (720p, 1080i) or HDMI (720p, 1080i) mode. When Double ( , ) mode has been set in PIP, the Picture Size cannot be set. When watching a DTV’s HD signal, you can use Wide Fit. Horizontal zoom(Wide Fit) sets the optical picture format by expanding it both horizontally and vertically. For example, you can reset the picture in 4:3 format to 16:9. Wide Fit does not support all external devices. • 16:9 : Sets the picture to 16:9 wide mode. • Zoom1 : Magnifies the size of the picture on screen. • Zoom2 : Magnifies the size of the picture more than “Zoom1”. • Wide Fit : Enlarges the aspect ratio of the picture to fit the entire screen. • 4:3 : Sets the picture to 4:3 normal mode. BN68-01047G-00Eng.qxd 4/26/06 5:37 AM Page 44
English-45 Using the Color Weakness Enhancement Feature This feature adjusts the Red, Green or Blue color to compensate for the user’s particular color weakness. 1 Press the MENUbutton. Press the or button to select “Setup”, then press the ENTERbutton. 2 Press the or button to select “Color Weakness”, then press the ENTERbutton. 3 Press the or button to select “Color Weakness”, then press the ENTERbutton. Press the or button to select “On”, then press the ENTERbutton. 4 Press the or button to select a color to be adjusted, then press the ENTERbutton. Press the or button to adjust the value of a color selected. Select “Return” by pressing the or button, then press the ENTERbutton to return to the previous menu. Press the EXITbutton to exit. • You can also select these options (Red, Green or Blue) by pressing the or button. BN68-01047G-00Eng.qxd 4/26/06 5:37 AM Page 45
English-46 Digital Noise Reduction If the broadcast signal received by your TV is weak, you can activate the Digital Noise Reduction feature to help reduce any static and ghosting that may appear on the screen. 1 Press the MENUbutton. Press the or button to select “Picture”, then press the ENTERbutton. 2 Press the or button to select “Digital NR”, then press the ENTERbutton. 3 Press the or button to select “Off” or “On”, then press the ENTERbutton. Select “Return” by pressing the or button, then press the ENTER button to return to the previous menu. Press the EXITbutton to exit. BN68-01047G-00Eng.qxd 4/26/06 5:37 AM Page 46
English-47 DNIe (Digital Natural Image engine) This TV includes the DNIe function to provide high visual quality. If you set DNIe to On, you can view the screen with the DNIe feature activated. pictures on the screen simultaneously, for demonstration purposes. Using this function, you can view the difference in the visual quality. 1 Press the MENUbutton. Press the or button to select “Picture”, then press the ENTERbutton. 2 Press the or button to select “DNIe”, then press the ENTERbutton. 3 Press the or button to select “Off”, “Demo”, or “On” then press the ENTERbutton. Select “Return” by pressing the or button, then press the ENTERbutton to return to the previous menu. Press the EXITbutton to exit. DNIeTM(Digital Natural Image engine) This feature brings you a more detailed image with 3D noise reduction and detail, contrast and white enhancement. This function doesn’t work when the Input Source is PC. The DNIe function is not supported in the Movie mode. (It is inactivated.) BN68-01047G-00Eng.qxd 4/26/06 5:37 AM Page 47
English-48 Setting the Film Mode You can automatically sense and process film signals from all sources and adjust the picture for optimum quality. 1 Press the MENUbutton. Press the or button to select “Picture”, then press the ENTERbutton. 2 Press the or button to select “Film Mode”, then press the ENTERbutton. 3 Press the or button to select “Off” or “On”, then press the ENTERbutton. Select “Return” by pressing the or button, then press the ENTERbutton to return to the previous menu. Press the EXITbutton to exit. The Film Mode can only be set when viewing an analog signal in AV modes (AV, S-Video or Component) that support SD (Standard Definition) signals (480i). BN68-01047G-00Eng.qxd 4/26/06 5:37 AM Page 48