Samsung LN-S5797D Lcd Tv Owners Guide

							English-89
Adjusting the Picture Quality and Position Automatically
This feature allows the TV to self-adjust to the incoming video signal. The values of fine, coarse and position are adjusted automatically.
1
Press the SOURCEbutton to select “PC”.
2
Press the MENUbutton.            
Press the  or  button to select “Setup”, 
then press  the 
ENTERbutton.
3
Press the  or  button to select “PC”, 
then press the 
ENTERbutton.
4
Press the  or  button to select 
“Auto Adjustment”, then press the 
ENTER
button. The picture quality and position are 
automatically adjusted, and the picture returns 
to original view a few seconds later. 
Select “Return” by pressing the 
or  button, then press the 
ENTERbutton to return to the 
previous menu. Press the 
EXITbutton to exit.
BN68-01047G-00Eng.qxd  4/26/06  5:38 AM  Page 89 
						

							English-90
Changing the Picture Size (PC Mode)
You can select the picture size which best corresponds to your viewing requirements.
1
Press the SOURCEbutton to select “PC”.
2
Press the  or  button to select “Picture”, 
then press  the 
ENTERbutton.
Press the  or  button to select “Size”, 
then press the 
ENTERbutton.
3
Press the  or  button to select the screen 
format you want, then press the 
ENTERbutton.
• 16:9 : Scales the picture to 92% of the TV screen, 
regardless of the aspect ratio of the input source. 
• 4:3 : Displays the picture as it is without 
changing the aspect ratio of input source.
Select “Return” by pressing the  or  button, then press the ENTER
button to return to the previous menu. Press the EXITbutton to exit.
BN68-01047G-00Eng.qxd  4/26/06  5:38 AM  Page 90 
						

							English-91
Viewing the Current Resolution
You can get the resolution information of your PC.
1
Press the SOURCEbutton to select “PC”.
2
Press the MENUbutton.            
Press the  or  button to select “Setup”, 
then press  the 
ENTERbutton.
3
Press the  or  button to select “PC”, 
then press  the 
ENTERbutton.
The resolution information is displayed on the
screen.
To change the resolution, see pages 86.
BN68-01047G-00Eng.qxd  4/26/06  5:38 AM  Page 91 
						

							English-92
Initializing the Picture Settings
You can replace all picture settings with the factory default values.
1
Press the SOURCEbutton to select “PC”.
2
Press the MENUbutton.            
Press the  or  button to select “Setup”, 
then press  the 
ENTERbutton.
3
Press the  or  button to select “PC”, 
then press the 
ENTERbutton.
4
Press the  or  button to select “Image Reset”,
then press the 
ENTERbutton.
The picture settings are replaced with the factory
default values.
Select “Return” by pressing the  or  button, 
then press the 
ENTERbutton to return to the 
previous menu. Press the 
EXITbutton to exit.
BN68-01047G-00Eng.qxd  4/26/06  5:38 AM  Page 92 
						

							English-93
Identifying Problems
If the TV seems to have a problem, first try this list of possible problems and solutions.
If none of these troubleshooting tips apply, call your nearest Samsung service center.
Problem
Poor picture quality.
Poor sound quality.
No picture or sound.
No sound or sound is too low at 
maximum volume.
Picture rolls vertically.
The TV operates erratically.
The TV won’t turn on.
Remote control malfunctions
“Check signal cable” message.
“Not Supported Mode” message.
Digital broadcasting screen 
problem.
The image is too light or too dark.
Horizontal bars appear to flicker,
jitter or shimmer on the image.
Vertical bars appear to flicker, 
jitter or shimmer on the image.
Screen is black and power 
indicator light blinks steadily.
Image is not stable and may appear
to vibrate when you have a 
computer connected to the PC input.
Image is not centered on the screen.
If a still image is displayed for 
an extended period of time, residual
images or blurring may appear. 
Possible Solution
Try another channel.
Adjust the antenna.
Check all wire connections.
Try another channel.
Adjust the antenna.
Try another channel.
Press the
SOURCEbutton.
Make sure the TV is plugged in.
Check the antenna connections.
First, check the volume of units connected to your TV (digital broadcasting receiver, DVD, cable 
broadcasting receiver, VCR, etc.). Then, adjust the TV volume accordingly.
Check all wire connections.
Unplug the TV for 30 seconds, then try operating it again.
Make sure the wall outlet is working.
Replace the remote control batteries.
Clean the upper edge of the remote control (transmission window).
Check the battery terminals.
Ensure that the signal cable is firmly connected to the PC source.
Check the maximum resolution and the frequency of the Video Adapter.
Compare these values with the data in the Display Modes.
Please check the digital signal strength and input antenna.
Adjust the Brightness and Contrast.
Adjust the Fine tuning.
Adjust the Coarse tuning and then adjust the Fine tuning.
Adjust the Coarse tuning and then adjust the Fine tuning.
On your computer check: Power, Signal Cable.
The TV is using its power management system. 
Move the computer's mouse or press any key on the keyboard. 
If the setting is not correct, use your computer utility program to change the display settings.
Your TV supports multiscan display functions within the following frequency domain:
Adjust the horizontal and vertical position.
The screen position must be adjusted on the output source (i.e. STB) with a digital signal.
When you need to leave the monitor unused for an extended period of time, adjust the settings so 
that the monitor automatically goes into energy saving mode or activates the screen saver to display
moving images.
Horizontal frequency (kHz) 
Vertical frequency (Hz)
PC Maximum refresh rate
(at 60 Hz)30~60
60~75
1920 x 1080
The TFT LCD panel uses a panel consisting of sub pixels  6,220,800 which require sophisticated technology to produce.
However, there may be few bright or dark pixels on the screen. These pixels will have no impact on the performance of the product.
Appendix
BN68-01047G-00Eng.qxd  4/26/06  5:38 AM  Page 93 
						

							English-94
Installing the Stand
1.Place the TV face down on a soft cloth or cushion on a table.
2.Put the stand into the hole at the bottom of the TV.
3.Insert screw into the hole indicated and tighten.
< 2 >< 3 >
Disconnecting the Stand
1.Place the TV face down on a soft cloth or cushion on a table.
2.Remove four screws from the back of the TV.
3.Separate the stand from the TV.
4.Cover the bottom hole with a cap.
< 2 >< 3 >< 4 >
BN68-01047G-00Eng.qxd  4/26/06  5:38 AM  Page 94 
						

							English-95
Installation Notes
Installing the Wall Mount Kit
Refer to the correct installation guide according to your wall bracket.This LCD TV accepts a 700 mm x 400 mm VESA-compliant mounting interface pad.
1. Contact a technician for installing the wall bracket.
2. Samsung Electronics is not responsible for any damages to the product or injury to yourself or others if you elect to perform the wall installation.
3. This product is for installing on cement walls. The product may not stay in place when installed on plaster or wood.
Parts (Wall attachment panel is sold separately. Check with your dealer.)
Only use the components and accessories shipped with the panel.
Wall-Bracket
Right: 1 Left: 1Screw 11EA
M8 X L40 Anchor : 11EA Plastic Hanger : 4EA
Screw 11EA
M4 X L20  
Wall-Bracket Accessories
How to assemble the Wall Mount Bracket
1   Insert and tighten the Captive Screw in the direction of the arrow.
When done, mount the wall bracket on the wall.
Wall Bracket Captive ScrewHinge
(Left)
There are two hinges
(left and right). Use the
correct one.
Hinge
(Right)
Before drilling into the wall, check if the length between the two 
locking holes at the back of the product is correct. If the length is too
short or long, loosen all or some of the 4 screws on the wall bracket 
to adjust the length.
Length between the
two locking holes
Check the installation diagram and mark the drill points on the wall.
Use the 5.0 mm bit to drill holes deeper than 35 mm. 
Fix each anchor in the corresponding hole. Match each of the
brackets and hinge holes to the corresponding anchor holes and
insert and tighten the 11 screws  .
BN68-01047G-00Eng.qxd  4/26/06  5:38 AM  Page 95 
						

							English-96
Fixing the TV panel to the wall attachment panel bracket
Installing the Wall Mount Kit
The shape of the product may vary depending on the model. (The assemblies of the plastic hanger and the screw are the same)
2   Remove the 4 screws on the back of the product.
Insert the screw  into the plastic hanger. (See the figure below)
Tighten the 4 screws in step 2 (plastic hanger + screw  ) to the    
rear holes of the product.Remove safety pin ( ) and insert the 4 product holders into the 
corresponding bracket holes ( ). Then place the product ( ) so 
that it is firmly fixed to the bracket. Make sure to reinsert and tighten
the safety pin ( ) to securely hold the product to the bracket.
Wall Bracket
• Mount the product on the wall bracket and make sure it is 
properly fixed to the left and right plastic hangers.
• Be careful when installing the product on the bracket as 
fingers can be caught in the holes.
• Make sure the wall bracket is securely fixed to the wall, or the
product may not stay in place after installation.
LCD TV
Wall
How to Adjust Mounting Angle
Adjust the bracket angle to -2° before installing it on the wall.
1. Fix the product to the wall bracket.
2. Hold the product at the top in the center and pull it forward (direction
of the arrow) to adjust the angle. (See the figure to the right)
3. You can adjust the bracket angle between -2° and 15°. Make sure to use the top center, and not the left or the right side 
of the product to adjust the angle. 
BN68-01047G-00Eng.qxd  4/26/06  5:38 AM  Page 96 
						

							English-97
1.Insert the locking device into the Kensington slot on the LCD TV (Figure 1), and turn it in the locking direction (Figure 2).2.Connect the Kensington lock cable.3.Fix the Kensington lock to a desk or a heavy stationary object.Using the Anti-Theft Kensington LockThe Kensington lock is a device used to physically fix the system when using it in a public place. The locking device has to be purchased separately. 
The appearance and locking method may differ from the illustration depending on the manufacturer.
Please refer to the manual provided with the Kensington lock for proper use.
Figure 2Figure 1Cable

SpecificationsModel Name
Screen Size (Diagonal)
Power Supply
Power Consumption
PC Resolution
SoundOutputDimensions (WxDxH)Body
With standWeightWith standEnvironmental ConsiderationsOperating Temperature
Operating Humidity
Storage Temperature
Storage Humidity
LN-S5797D57 inch
AC 110 V - 120 V
, 60 Hz
440 W
1920 x 1080 @ 60 Hz
15 W + 15 W
1374.0 x 381.0 x 975.0 mm
54.1 x 15.0 x 38.4 inch
1374.0 x 135.0 x 897.0 mm
54.1 x 5.3 x 35.3 inch
58.5 kg (128.9 Ibs)
50 °F to 104 °F (10 °C to 40 °C)10% to 80%, non-condensing-4 °F to 113 °F (-20 °C to 45 °C)5% to 95%, non-condensing
BN68-01047G-00Eng.qxd  5/1/06  11:56 PM  Page 97 
						

							English-98
Dimensions
TOP VIEW
JACK PANEL DETAIL 3.25" H x 9.92" W  @  12.98 " UP FROM BOTTOM
FRONT VIEW
BN68-01047G-00Eng.qxd  4/26/06  5:38 AM  Page 98