Panasonic Kx Taw848 Feature Manual
Have a look at the manual Panasonic Kx Taw848 Feature Manual online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 10737 Panasonic manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.
![Page 406
4.4 Extension [4]
406 Feature Guide
Option 6
Extension Number
Indicates the extension number of the PS (reference only).
Extension Name
Specifies the name of the PS. As for the available characters, refer to the character code table
described in section 3.2.1 Installing and Starting KX-TAW848 Maintenance Console.
Flash mode during CO Conversation
Selects the function of the FLASH/RECALL button during a CO line conversation.
Incoming Call Log Memory
Specifies the number of incoming CO line calls that are...](http://img.usermanuals.tech/thumb/58/64575/w64_kx-taw848_en_adv_feature_v1.1_om_d-405.png "Page 406
4.4 Extension [4]
406 Feature Guide
Option 6
Extension Number
Indicates the extension number of the PS (reference only).
Extension Name
Specifies the name of the PS. As for the available characters, refer to the character code table
described in section 3.2.1 Installing and Starting KX-TAW848 Maintenance Console.
Flash mode during CO Conversation
Selects the function of the FLASH/RECALL button during a CO line conversation.
Incoming Call Log Memory
Specifies the number of incoming CO line calls that are...")
![Page 407
4.4 Extension [4]
Feature Guide 407
Outgoing Call Log Memory
Specifies the number of telephone numbers dialed by the PS that are retained in the PS’s
Outgoing Call Log memory.
Group CW w/o Tone (Ring after Call)
Enables an incoming call to an incoming call distribution group to arrive at a previously busy
PS at the time of going on-hook after a call.
FWD / DND Reference
Call Forwarding (FWD) and Do Not Disturb (DND) settings for each PS can be referred. FWD
and DND settings can be programmed...](http://img.usermanuals.tech/thumb/58/64575/w64_kx-taw848_en_adv_feature_v1.1_om_d-406.png "Page 407
4.4 Extension [4]
Feature Guide 407
Outgoing Call Log Memory
Specifies the number of telephone numbers dialed by the PS that are retained in the PS’s
Outgoing Call Log memory.
Group CW w/o Tone (Ring after Call)
Enables an incoming call to an incoming call distribution group to arrive at a previously busy
PS at the time of going on-hook after a call.
FWD / DND Reference
Call Forwarding (FWD) and Do Not Disturb (DND) settings for each PS can be referred. FWD
and DND settings can be programmed...")
![Page 408
4.4 Extension [4]
408 Feature Guide
FWD Set for Call from CO
Indicates the current FWD status for incoming CO line calls (reference only).
DND Set for Call from CO
Indicates the current DND status for incoming CO line calls (reference only).
FWD Mode for Call from CO
Indicates the forwarding type of incoming CO line calls (reference only).
FWD Destination for Call from CO
Indicates the forwarding destination of incoming CO line calls (reference only).
Feature Guide References
None
DefaultOff
Va lu e Ra...](http://img.usermanuals.tech/thumb/58/64575/w64_kx-taw848_en_adv_feature_v1.1_om_d-407.png "Page 408
4.4 Extension [4]
408 Feature Guide
FWD Set for Call from CO
Indicates the current FWD status for incoming CO line calls (reference only).
DND Set for Call from CO
Indicates the current DND status for incoming CO line calls (reference only).
FWD Mode for Call from CO
Indicates the forwarding type of incoming CO line calls (reference only).
FWD Destination for Call from CO
Indicates the forwarding destination of incoming CO line calls (reference only).
Feature Guide References
None
DefaultOff
Va lu e Ra...")
![Page 409
4.4 Extension [4]
Feature Guide 409
FWD Set for Call from Extension
Indicates the current FWD status for incoming intercom calls (reference only).
DND Set for Call from Extension
Indicates the current DND status for incoming intercom calls (reference only).
FWD Mode for Call from Extension
Indicates the forwarding type of incoming intercom calls (reference only).
FWD Destination for Call from Extension
Indicates the forwarding destination of incoming intercom calls (reference only).
Feature Guide...](http://img.usermanuals.tech/thumb/58/64575/w64_kx-taw848_en_adv_feature_v1.1_om_d-408.png "Page 409
4.4 Extension [4]
Feature Guide 409
FWD Set for Call from Extension
Indicates the current FWD status for incoming intercom calls (reference only).
DND Set for Call from Extension
Indicates the current DND status for incoming intercom calls (reference only).
FWD Mode for Call from Extension
Indicates the forwarding type of incoming intercom calls (reference only).
FWD Destination for Call from Extension
Indicates the forwarding destination of incoming intercom calls (reference only).
Feature Guide...")
![Page 410
4.4 Extension [4]
410 Feature Guide
FWD No Answer Time
Indicates the length of time an incoming call rings at the PS before the call is forwarded
(reference only).
4.4.8 Portable Station—FWD/DND [4-2-2]
For each PS, separate Call Forwarding (FWD) and Do Not Disturb (DND) settings can be
programmed for incoming intercom and CO line calls. Select the desired PS from the
Extension Number / Name list.
Call from CO—Present Button Status
Indicates the current status of the FWD/DND—External button (reference...](http://img.usermanuals.tech/thumb/58/64575/w64_kx-taw848_en_adv_feature_v1.1_om_d-409.png "Page 410
4.4 Extension [4]
410 Feature Guide
FWD No Answer Time
Indicates the length of time an incoming call rings at the PS before the call is forwarded
(reference only).
4.4.8 Portable Station—FWD/DND [4-2-2]
For each PS, separate Call Forwarding (FWD) and Do Not Disturb (DND) settings can be
programmed for incoming intercom and CO line calls. Select the desired PS from the
Extension Number / Name list.
Call from CO—Present Button Status
Indicates the current status of the FWD/DND—External button (reference...")
![Page 411
4.4 Extension [4]
Feature Guide 411
Call from CO—DND Status Availability
Turns on or off the DND feature for incoming CO line calls.
Call from CO—FWD Mode
Specifies the circumstances when incoming CO line calls are forwarded.
Call from CO—FWD Destination
Specifies the forwarding destination of incoming CO line calls.
Call from Extension—Present Button Status
Indicates the current status of the FWD/DND—Internal button (reference only). Programming References
None
DefaultOFF
Va lu e Ra n g eOFF, ON...](http://img.usermanuals.tech/thumb/58/64575/w64_kx-taw848_en_adv_feature_v1.1_om_d-410.png "Page 411
4.4 Extension [4]
Feature Guide 411
Call from CO—DND Status Availability
Turns on or off the DND feature for incoming CO line calls.
Call from CO—FWD Mode
Specifies the circumstances when incoming CO line calls are forwarded.
Call from CO—FWD Destination
Specifies the forwarding destination of incoming CO line calls.
Call from Extension—Present Button Status
Indicates the current status of the FWD/DND—Internal button (reference only). Programming References
None
DefaultOFF
Va lu e Ra n g eOFF, ON...")
![Page 412
4.4 Extension [4]
412 Feature Guide
Call from Extension—FWD Status Availability
Turns on or off the FWD feature for incoming intercom calls.
Call from Extension—DND Status Availability
Turns on or off the DND feature for incoming intercom calls.
Call from Extension—FWD Mode
Specifies the circumstances when incoming intercom calls are forwarded.
Call from Extension—FWD Destination
Specifies the forwarding destination of incoming intercom calls.Programming References
None
DefaultOFF
Va lu e Ra n g eOFF,...](http://img.usermanuals.tech/thumb/58/64575/w64_kx-taw848_en_adv_feature_v1.1_om_d-411.png "Page 412
4.4 Extension [4]
412 Feature Guide
Call from Extension—FWD Status Availability
Turns on or off the FWD feature for incoming intercom calls.
Call from Extension—DND Status Availability
Turns on or off the DND feature for incoming intercom calls.
Call from Extension—FWD Mode
Specifies the circumstances when incoming intercom calls are forwarded.
Call from Extension—FWD Destination
Specifies the forwarding destination of incoming intercom calls.Programming References
None
DefaultOFF
Va lu e Ra n g eOFF,...")
![Page 413
4.4 Extension [4]
Feature Guide 413
FWD No Answer Timer
Specifies the length of time an incoming call rings at the PS before the call is forwarded.
4.4.9 Portable Station—Flexible Key [4-2-3]
Each flexible CO button can be customized to allow one-touch access to a certain feature. A
maximum of 12 flexible CO buttons can be customized for each PS. Select the desired PS from
the Extension Number / Name list.
Ty p e
Specifies the feature to be assigned to the flexible button.
Parameter Selection (for...](http://img.usermanuals.tech/thumb/58/64575/w64_kx-taw848_en_adv_feature_v1.1_om_d-412.png "Page 413
4.4 Extension [4]
Feature Guide 413
FWD No Answer Timer
Specifies the length of time an incoming call rings at the PS before the call is forwarded.
4.4.9 Portable Station—Flexible Key [4-2-3]
Each flexible CO button can be customized to allow one-touch access to a certain feature. A
maximum of 12 flexible CO buttons can be customized for each PS. Select the desired PS from
the Extension Number / Name list.
Ty p e
Specifies the feature to be assigned to the flexible button.
Parameter Selection (for...")
![Page 414
4.4 Extension [4]
414 Feature Guide
Parameter Selection (for Group CO)
Specifies the CO line group to be accessed.
Parameter Selection (for Call Park)
Specifies whether a call is parked in an idle parking zone automatically, or in a specific parking
zone.
Parameter Selection (for Log-in/Log-out)
Specifies which incoming call distribution groups that the PS belongs to are logged-in to or
logged-out from.
Feature Guide References
Feature References
1.18.2 Flexible Buttons
Programming References
4.4.10...](http://img.usermanuals.tech/thumb/58/64575/w64_kx-taw848_en_adv_feature_v1.1_om_d-413.png "Page 414
4.4 Extension [4]
414 Feature Guide
Parameter Selection (for Group CO)
Specifies the CO line group to be accessed.
Parameter Selection (for Call Park)
Specifies whether a call is parked in an idle parking zone automatically, or in a specific parking
zone.
Parameter Selection (for Log-in/Log-out)
Specifies which incoming call distribution groups that the PS belongs to are logged-in to or
logged-out from.
Feature Guide References
Feature References
1.18.2 Flexible Buttons
Programming References
4.4.10...")
![Page 415
4.4 Extension [4]
Feature Guide 415
Parameter Selection (for Time Service)
Selects which time modes are switched manually.
Parameter Selection (for TRS Level Change)
Specifies the TRS level to be used temporarily on a certain PS.
Parameter Selection (for Time Service - Automatic / Manual)
Specifies the Time Table to be used when the Time Service Switching Mode is set to
automatic.
Ext No. or Floating Ext No. (for DSS)
Specifies the number of an extension to be accessed. DefaultAll
Va lu e Ra n g eAll...](http://img.usermanuals.tech/thumb/58/64575/w64_kx-taw848_en_adv_feature_v1.1_om_d-414.png "Page 415
4.4 Extension [4]
Feature Guide 415
Parameter Selection (for Time Service)
Selects which time modes are switched manually.
Parameter Selection (for TRS Level Change)
Specifies the TRS level to be used temporarily on a certain PS.
Parameter Selection (for Time Service - Automatic / Manual)
Specifies the Time Table to be used when the Time Service Switching Mode is set to
automatic.
Ext No. or Floating Ext No. (for DSS)
Specifies the number of an extension to be accessed. DefaultAll
Va lu e Ra n g eAll...")
![Page 416
4.4 Extension [4]
416 Feature Guide
Ext No. or Floating Ext No. (for G-DN)
Specifies the floating extension number of an incoming call distribution group to be accessed.
Ext No. or Floating Ext No. (for Message Waiting)
Specifies the number of an extension or floating extension number of an incoming call
distribution group for which messages are checked. If this cell is left empty, the PS will check
its own messages only.
Ext No. or Floating Ext No. (for Group FWD (Both))
Specifies the floating...](http://img.usermanuals.tech/thumb/58/64575/w64_kx-taw848_en_adv_feature_v1.1_om_d-415.png "Page 416
4.4 Extension [4]
416 Feature Guide
Ext No. or Floating Ext No. (for G-DN)
Specifies the floating extension number of an incoming call distribution group to be accessed.
Ext No. or Floating Ext No. (for Message Waiting)
Specifies the number of an extension or floating extension number of an incoming call
distribution group for which messages are checked. If this cell is left empty, the PS will check
its own messages only.
Ext No. or Floating Ext No. (for Group FWD (Both))
Specifies the floating...")
4.4 Extension [4] Feature Guide 411 Call from CO—DND Status Availability Turns on or off the DND feature for incoming CO line calls. Call from CO—FWD Mode Specifies the circumstances when incoming CO line calls are forwarded. Call from CO—FWD Destination Specifies the forwarding destination of incoming CO line calls. Call from Extension—Present Button Status Indicates the current status of the FWD/DND—Internal button (reference only). Programming References None DefaultOFF Va lu e Ra n g eOFF, ON Feature Guide References Feature References 1.3.1.3 Do Not Disturb (DND) Programming References None DefaultNone Va lu e Ra n g eNone, FWD ALL, FWD Busy, FWD N/A, FWD Busy N/A Feature Guide References Feature References 1.3.1.2 Call Forwarding (FWD) Programming References None DefaultNot stored. Va lu e Ra n g eMax. 32 digits (consisting of 0–9, *, #, [, ] [Secret], and P [Pause]) Feature Guide References Feature References 1.3.1.2 Call Forwarding (FWD) Programming References None DefaultCurrent status Va lu e Ra n g eOFF, FWD, DND Feature Guide References Feature References 1.3.1.1 Call Forwarding (FWD)/Do Not Disturb (DND)—OVERVIEW
4.4 Extension [4] 412 Feature Guide Call from Extension—FWD Status Availability Turns on or off the FWD feature for incoming intercom calls. Call from Extension—DND Status Availability Turns on or off the DND feature for incoming intercom calls. Call from Extension—FWD Mode Specifies the circumstances when incoming intercom calls are forwarded. Call from Extension—FWD Destination Specifies the forwarding destination of incoming intercom calls.Programming References None DefaultOFF Va lu e Ra n g eOFF, ON Feature Guide References Feature References 1.3.1.2 Call Forwarding (FWD) Programming References None DefaultOFF Va lu e Ra n g eOFF, ON Feature Guide References Feature References 1.3.1.3 Do Not Disturb (DND) Programming References None DefaultNone Va lu e Ra n g eNone, FWD ALL, FWD Busy, FWD N/A, FWD Busy N/A Feature Guide References Feature References 1.3.1.2 Call Forwarding (FWD) Programming References None DefaultNot stored. Va lu e Ra n g eMax. 32 digits (consisting of 0–9, *, #, [, ] [Secret], and P [Pause]) Feature Guide References Feature References 1.3.1.2 Call Forwarding (FWD)
4.4 Extension [4] Feature Guide 413 FWD No Answer Timer Specifies the length of time an incoming call rings at the PS before the call is forwarded. 4.4.9 Portable Station—Flexible Key [4-2-3] Each flexible CO button can be customized to allow one-touch access to a certain feature. A maximum of 12 flexible CO buttons can be customized for each PS. Select the desired PS from the Extension Number / Name list. Ty p e Specifies the feature to be assigned to the flexible button. Parameter Selection (for Single CO) Specifies the CO line to be accessed.Programming References None Default15 s Va lu e Ra n g e0–120 s Feature Guide References Feature References 1.3.1.2 Call Forwarding (FWD) Programming References None DefaultKey Locati on 1–8: Single CO Key Locati on 9–12: Not Stored Va lu e Ra n g eNot Stored, Loop CO, Single CO, Group CO, DSS, One-touch, G- DN, Message Waiting, FWD/DND (Both), FWD/DND (External), FWD/DND (Internal), Group FWD (Both), Group FWD (External), Group FWD (Internal), Account, Conference, Terminate, EFA, Call Park, Log-in/Log-out, Hurry-up, Wrap-up, Time Service, TRS Level Change, Time Service - Automatic / Manual, Two-way Record, Two-way Transfer, LCS, Voice Mail Transfer Feature Guide References Feature References 1.18.2 Flexible Buttons Programming References 4.4.10 Portable Station—Flexible Key [4-2-3] Flexible Key Data Copy Default1 Va lu e Ra n g e1–8
4.4 Extension [4] 414 Feature Guide Parameter Selection (for Group CO) Specifies the CO line group to be accessed. Parameter Selection (for Call Park) Specifies whether a call is parked in an idle parking zone automatically, or in a specific parking zone. Parameter Selection (for Log-in/Log-out) Specifies which incoming call distribution groups that the PS belongs to are logged-in to or logged-out from. Feature Guide References Feature References 1.18.2 Flexible Buttons Programming References 4.4.10 Portable Station—Flexible Key [4-2-3] Flexible Key Data Copy Default1 Va lu e Ra n g e1–64 Feature Guide References Feature References 1.18.2 Flexible Buttons Programming References 4.4.10 Portable Station—Flexible Key [4-2-3] Flexible Key Data Copy DefaultAutomatic Va lu e Ra n g eAutomatic, Specific Feature Guide References Feature References 1.12.2 Call Park 1.18.2 Flexible Buttons Programming References 4.4.10 Portable Station—Flexible Key [4-2-3] Flexible Key Data Copy DefaultNone Va lu e Ra n g eNone: The incoming call distribution group is selected manually. All: All incoming call distribution groups that the PS belongs to. Incoming Group: A specified incoming call distribution group Feature Guide References Feature References 1.2.2.6 Log-in/Log-out 1.18.2 Flexible Buttons Programming References 4.4.10 Portable Station—Flexible Key [4-2-3] Flexible Key Data Copy
4.4 Extension [4] Feature Guide 415 Parameter Selection (for Time Service) Selects which time modes are switched manually. Parameter Selection (for TRS Level Change) Specifies the TRS level to be used temporarily on a certain PS. Parameter Selection (for Time Service - Automatic / Manual) Specifies the Time Table to be used when the Time Service Switching Mode is set to automatic. Ext No. or Floating Ext No. (for DSS) Specifies the number of an extension to be accessed. DefaultAll Va lu e Ra n g eAll (Day/Night/Lunch/Break), Day/Night/Break, Day/Night/Lunch, Day/Night Feature Guide References Feature References 1.18.2 Flexible Buttons 2.2.4 Time Service Programming References 4.4.10 Portable Station—Flexible Key [4-2-3] Flexible Key Data Copy Default1 Va lu e Ra n g e1–7 Feature Guide References Feature References 1.18.2 Flexible Buttons Programming References 4.4.10 Portable Station—Flexible Key [4-2-3] Flexible Key Data Copy Default1 Va lu e Ra n g e1–8 Feature Guide References Feature References 1.18.2 Flexible Buttons 2.2.4 Time Service Programming References 4.4.10 Portable Station—Flexible Key [4-2-3] Flexible Key Data Copy DefaultNot stored. Va lu e Ra n g eMax. 4 digits (consisting of 0–9)
4.4 Extension [4] 416 Feature Guide Ext No. or Floating Ext No. (for G-DN) Specifies the floating extension number of an incoming call distribution group to be accessed. Ext No. or Floating Ext No. (for Message Waiting) Specifies the number of an extension or floating extension number of an incoming call distribution group for which messages are checked. If this cell is left empty, the PS will check its own messages only. Ext No. or Floating Ext No. (for Group FWD (Both)) Specifies the floating extension number of an incoming call distribution group to which both intercom and CO line calls are forwarded. Ext No. or Floating Ext No. (for Group FWD (External)) Specifies the floating extension number of an incoming call distribution group to which CO line calls are forwarded. Feature Guide References Feature References 1.18.2 Flexible Buttons Programming References 4.4.10 Portable Station—Flexible Key [4-2-3] Flexible Key Data Copy DefaultNot stored. Va lu e Ra n g eMax. 4 digits (consisting of 0–9) Feature Guide References Feature References 1.18.2 Flexible Buttons Programming References 4.4.10 Portable Station—Flexible Key [4-2-3] Flexible Key Data Copy DefaultNot stored. Va lu e Ra n g eMax. 4 digits (consisting of 0–9) Feature Guide References Feature References 1.18.2 Flexible Buttons Programming References 4.4.10 Portable Station—Flexible Key [4-2-3] Flexible Key Data Copy DefaultNot stored. Va lu e Ra n g eMax. 4 digits (consisting of 0–9) Feature Guide References Feature References 1.18.2 Flexible Buttons Programming References 4.4.10 Portable Station—Flexible Key [4-2-3] Flexible Key Data Copy
4.4 Extension [4] Feature Guide 417 Ext No. or Floating Ext No. (for Group FWD (Internal)) Specifies the floating extension number of an incoming call distribution group to which intercom calls are forwarded. Ext No. or Floating Ext No. (for Log-in/Log-out) Specifies the floating extension number of an incoming call distribution group to log-in to or log- out from. Ext No. or Floating Ext No. (for Hurry-up) Specifies the floating extension number of an incoming call distribution group for which Manual Queue Redirection is performed for the longest waiting call. DefaultNot stored. Va lu e Ra n g eMax. 4 digits (consisting of 0–9) Feature Guide References Feature References 1.18.2 Flexible Buttons Programming References 4.4.10 Portable Station—Flexible Key [4-2-3] Flexible Key Data Copy DefaultNot stored. Va lu e Ra n g eMax. 4 digits (consisting of 0–9) Feature Guide References Feature References 1.18.2 Flexible Buttons Programming References 4.4.10 Portable Station—Flexible Key [4-2-3] Flexible Key Data Copy DefaultNot stored. Va lu e Ra n g eMax. 4 digits (consisting of 0–9) Feature Guide References Feature References 1.18.2 Flexible Buttons Programming References 4.4.10 Portable Station—Flexible Key [4-2-3] Flexible Key Data Copy DefaultNot stored. Va lu e Ra n g eMax. 4 digits (consisting of 0–9) Feature Guide References Feature References 1.18.2 Flexible Buttons Programming References 4.4.10 Portable Station—Flexible Key [4-2-3] Flexible Key Data Copy
4.4 Extension [4] 418 Feature Guide Ext No. or Floating Ext No. (for Two-way Record) Specifies the floating extension number of the VM (DPT) group containing the PS’s mailbox. Ext No. or Floating Ext No. (for Two-way Transfer) Specifies the floating extension number of the VM (DPT) group containing the desired mailbox. Ext No. or Floating Ext No. (for Voice Mail Transfer) Specifies the floating extension number of the VM (DTMF/DPT) group containing the desired mailbox. Dial (for One-touch) Specifies the number to be dialed. The PBX can have a maximum of 500 One-touch Dialing buttons for PSs. DefaultNot stored. Va lu e Ra n g eMax. 4 digits (consisting of 0–9) Feature Guide References Feature References 1.18.2 Flexible Buttons Programming References 4.4.10 Portable Station—Flexible Key [4-2-3] Flexible Key Data Copy DefaultNot stored. Va lu e Ra n g eMax. 4 digits (consisting of 0–9) Feature Guide References Feature References 1.18.2 Flexible Buttons Programming References 4.4.10 Portable Station—Flexible Key [4-2-3] Flexible Key Data Copy DefaultNot stored. Va lu e Ra n g eMax. 4 digits (consisting of 0–9) Feature Guide References Feature References 1.18.2 Flexible Buttons Programming References 4.4.10 Portable Station—Flexible Key [4-2-3] Flexible Key Data Copy DefaultNot stored. Va lu e Ra n g eMax. 32 digits (consisting of 0–9, *, #, T [Transfer], [, ] [Secret], P [Pause], and F [Flash]) Feature Guide References Feature References 1.18.2 Flexible Buttons
4.4 Extension [4] Feature Guide 419 Optional parameter (or Ringing Tone Type Number) (for Time Service) Specifies the Time Table to be used for changing time modes in the Automatic Switching mode. Optional parameter (or Ringing Tone Type Number) (for Call Park) Specifies the number of the parking zone a call is to be parked by pressing the Call Park button whose Parameter Selection on this screen is Specific. Extension Number of Mailbox (for Two-way Transfer) Specifies the number of the extension whose mailbox will be used to record conversations. (For example, a secretary records a conversation into the mailbox of a boss.) This setting establishes the One-touch Two-way Transfer button. If the cell is left empty, the extension user can specify the number of an extension each time.Programming References 4.4.10 Portable Station—Flexible Key [4-2-3] Flexible Key Data Copy Default1 Va lu e Ra n g e1–8 Feature Guide References Feature References 1.18.2 Flexible Buttons Programming References 4.4.10 Portable Station—Flexible Key [4-2-3] Flexible Key Data Copy DefaultNot stored. Va lu e Ra n g e0–99 Feature Guide References Feature References 1.12.2 Call Park 1.18.2 Flexible Buttons Programming References 4.4.10 Portable Station—Flexible Key [4-2-3] Flexible Key Data Copy DefaultNot stored. Va lu e Ra n g eMax. 4 digits (consisting of 0–9) Feature Guide References Feature References 1.18.2 Flexible Buttons Programming References 4.4.10 Portable Station—Flexible Key [4-2-3] Flexible Key Data Copy
4.4 Extension [4] 420 Feature Guide 4.4.10 Portable Station—Flexible Key [4-2-3] Flexible Key Data Copy The flexible CO button settings of a PS can be copied to different PSs. Select the PS that has the settings to copy to other PSs from the Extension Number / Name list, then click Copy To. Destination Extension Line Select the number and name of the PS that will receive the copied settings. Multiple PSs can be selected. To select all PSs at once, click Select All. 4.4.11 DSS Console—Main [4-3-1] A DSS Console can be used in conjunction with a PT. A maximum of 4 DSS Consoles can be programmed. The PT Property–Type of the extension port that DSS Console is connected must be set to DSS in Extension Port [1-5]. DSS Console Type Indicates the status of the extension port that the DSS Console is connected (reference only). Pair Extension Number Specifies the extension number of the PT to be used in pair with the DSS Console. Feature Guide References Feature References None Programming References 4.4.9 Portable Station—Flexible Key [4-2-3] DefaultCurrent status Va lu e Ra n g eDSS, No Connection Feature Guide References Feature References None Programming References 4.1.11 Extension Port [1-5]—PT Property—Type (for APT or Hybrid port) DefaultNot stored. Va lu e Ra n g eMax. 4 digits (consisting of 0–9) Feature Guide References Feature References 2.1.1 Extension Port Configuration Programming References None