Panasonic Kx Taw848 Feature Manual
Have a look at the manual Panasonic Kx Taw848 Feature Manual online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 10737 Panasonic manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.
![Page 306
4.2 System [2]
306 Feature Guide
Executive Busy Override Deny
Enables the authorization to prevent other extensions from interrupting calls.
Group Forward Set
Enables setting call forwarding for calls to an incoming call distribution group.
Deny Remote Operation by Other Extension
Enables the authorization to use the Walking COS or Remote Extension Control feature from
a remote location (inside, or outside the PBX using DISA).Programming References
4.2.8 Time Service—Week Table [2-5-1]
4.4.1 Wired...](http://img.usermanuals.tech/thumb/58/64575/w64_kx-taw848_en_adv_feature_v1.1_om_d-305.png "Page 306
4.2 System [2]
306 Feature Guide
Executive Busy Override Deny
Enables the authorization to prevent other extensions from interrupting calls.
Group Forward Set
Enables setting call forwarding for calls to an incoming call distribution group.
Deny Remote Operation by Other Extension
Enables the authorization to use the Walking COS or Remote Extension Control feature from
a remote location (inside, or outside the PBX using DISA).Programming References
4.2.8 Time Service—Week Table [2-5-1]
4.4.1 Wired...")
![Page 307
4.2 System [2]
Feature Guide 307
Accept the Call from DISA
Enables the authorization to receive calls from DISA.
Accept Wireless XDP Parallel Set by Other PS
Enables the authorization to allow Wireless XDP Parallel Mode to be set by a PS.
Programming Mode Level
Specifies the level of authorization for performing PT programming.
Manager
Specifies the authorization to use manager features.Programming References
4.4.1 Wired Extension—Extension Settings [4-1-1]—Main—COS
4.4.7 Portable Station—Extension...](http://img.usermanuals.tech/thumb/58/64575/w64_kx-taw848_en_adv_feature_v1.1_om_d-306.png "Page 307
4.2 System [2]
Feature Guide 307
Accept the Call from DISA
Enables the authorization to receive calls from DISA.
Accept Wireless XDP Parallel Set by Other PS
Enables the authorization to allow Wireless XDP Parallel Mode to be set by a PS.
Programming Mode Level
Specifies the level of authorization for performing PT programming.
Manager
Specifies the authorization to use manager features.Programming References
4.4.1 Wired Extension—Extension Settings [4-1-1]—Main—COS
4.4.7 Portable Station—Extension...")
![Page 308
4.2 System [2]
308 Feature Guide
4.2.15 Class of Service—External Call Block [2-7-2]
Each COS can have different CO line groups available for making CO line calls, depending on
the time mode (day/lunch/break/night). Select the desired time mode from the list.
Outgoing Trunk Group 1–64
Specifies the available CO line groups.
4.2.16 Class of Service—Internal Call Block [2-7-3]
Internal Call Block determines the restrictions placed on making intercom calls. The
extensions, incoming call distribution...](http://img.usermanuals.tech/thumb/58/64575/w64_kx-taw848_en_adv_feature_v1.1_om_d-307.png "Page 308
4.2 System [2]
308 Feature Guide
4.2.15 Class of Service—External Call Block [2-7-2]
Each COS can have different CO line groups available for making CO line calls, depending on
the time mode (day/lunch/break/night). Select the desired time mode from the list.
Outgoing Trunk Group 1–64
Specifies the available CO line groups.
4.2.16 Class of Service—Internal Call Block [2-7-3]
Internal Call Block determines the restrictions placed on making intercom calls. The
extensions, incoming call distribution...")
![Page 309
4.2 System [2]
Feature Guide 309
4.2.17 Ring Tone Patterns—Call from CO [2-8-1]
Different ring tone patterns can be selected for incoming CO line calls depending on the CO
line groups the calls come through. A maximum of 8 Ring Tone Pattern Tables can be
programmed, and any pattern table can be selected for use by an extension.
Ring Tone Pattern Table 1–8
Specifies the ring tone pattern for incoming CO line calls.
4.2.18 Ring Tone Patterns—Call from Doorphone [2-8-2]
Different ring tone patterns can be...](http://img.usermanuals.tech/thumb/58/64575/w64_kx-taw848_en_adv_feature_v1.1_om_d-308.png "Page 309
4.2 System [2]
Feature Guide 309
4.2.17 Ring Tone Patterns—Call from CO [2-8-1]
Different ring tone patterns can be selected for incoming CO line calls depending on the CO
line groups the calls come through. A maximum of 8 Ring Tone Pattern Tables can be
programmed, and any pattern table can be selected for use by an extension.
Ring Tone Pattern Table 1–8
Specifies the ring tone pattern for incoming CO line calls.
4.2.18 Ring Tone Patterns—Call from Doorphone [2-8-2]
Different ring tone patterns can be...")
![Page 310
4.2 System [2]
310 Feature Guide
4.2.19 Ring Tone Patterns—Call from Others [2-8-3]
Different ring tone patterns can be selected for incoming intercom calls and ringing triggered
by certain PBX features (Timed Reminder, Call Back, and Live Call Screening). A maximum of
8 Ring Tone Pattern Tables can be programmed, and any pattern table can be selected for use
by an extension.
Extension—Ring Tone Pattern Table 1–8
Specifies the ring tone pattern for incoming intercom calls.
Timed Reminder—Ring Tone...](http://img.usermanuals.tech/thumb/58/64575/w64_kx-taw848_en_adv_feature_v1.1_om_d-309.png "Page 310
4.2 System [2]
310 Feature Guide
4.2.19 Ring Tone Patterns—Call from Others [2-8-3]
Different ring tone patterns can be selected for incoming intercom calls and ringing triggered
by certain PBX features (Timed Reminder, Call Back, and Live Call Screening). A maximum of
8 Ring Tone Pattern Tables can be programmed, and any pattern table can be selected for use
by an extension.
Extension—Ring Tone Pattern Table 1–8
Specifies the ring tone pattern for incoming intercom calls.
Timed Reminder—Ring Tone...")
![Page 311
4.2 System [2]
Feature Guide 311
4.2.20 System Options—Option 1 [2-9-1]
Various system settings can be programmed.
Time Display (12H/24H)
Selects the time format shown on the displays of extensions. The time display format assigned
here applies when setting time for the Timed Reminder.
Date Display
Selects the order month and date are shown on the displays of extensions.
Password / PIN Display Mode
Selects to hide or show passwords or PINs (Personal Identification Number) on the displays of
extensions...](http://img.usermanuals.tech/thumb/58/64575/w64_kx-taw848_en_adv_feature_v1.1_om_d-310.png "Page 311
4.2 System [2]
Feature Guide 311
4.2.20 System Options—Option 1 [2-9-1]
Various system settings can be programmed.
Time Display (12H/24H)
Selects the time format shown on the displays of extensions. The time display format assigned
here applies when setting time for the Timed Reminder.
Date Display
Selects the order month and date are shown on the displays of extensions.
Password / PIN Display Mode
Selects to hide or show passwords or PINs (Personal Identification Number) on the displays of
extensions...")
![Page 312
4.2 System [2]
312 Feature Guide
LED Indication - FWD
Selects the light pattern of the FWD/DND button while the FWD feature is activated.
LED Indication - DND
Selects the light pattern of the FWD/DND button while the DND feature is activated.
SCO button operation during CO conversation
Selects the function of the S-CO button while there is an ongoing CO line call.
Ringing Time before Automatic Answer for Call from CO
Specifies the number of times a PT in Hands-free Answerback mode will ring before a...](http://img.usermanuals.tech/thumb/58/64575/w64_kx-taw848_en_adv_feature_v1.1_om_d-311.png "Page 312
4.2 System [2]
312 Feature Guide
LED Indication - FWD
Selects the light pattern of the FWD/DND button while the FWD feature is activated.
LED Indication - DND
Selects the light pattern of the FWD/DND button while the DND feature is activated.
SCO button operation during CO conversation
Selects the function of the S-CO button while there is an ongoing CO line call.
Ringing Time before Automatic Answer for Call from CO
Specifies the number of times a PT in Hands-free Answerback mode will ring before a...")
![Page 313
4.2 System [2]
Feature Guide 313
FWD/DND press mode on the idle status
Selects the function of the FWD/DND button (fixed button) when it is pressed in idle status. (A
FWD/DND button customized on a flexible button is always in FWD/DND Cycle Switch mode,
and the mode cannot be changed.)
4.2.21 System Options—Option 2 [2-9-2]
Various system settings can be programmed.
Paging for DND Extension
Specifies whether the extension can receive paging when in DND mode.
Feature Guide References
Feature References...](http://img.usermanuals.tech/thumb/58/64575/w64_kx-taw848_en_adv_feature_v1.1_om_d-312.png "Page 313
4.2 System [2]
Feature Guide 313
FWD/DND press mode on the idle status
Selects the function of the FWD/DND button (fixed button) when it is pressed in idle status. (A
FWD/DND button customized on a flexible button is always in FWD/DND Cycle Switch mode,
and the mode cannot be changed.)
4.2.21 System Options—Option 2 [2-9-2]
Various system settings can be programmed.
Paging for DND Extension
Specifies whether the extension can receive paging when in DND mode.
Feature Guide References
Feature References...")
![Page 314
4.2 System [2]
314 Feature Guide
Automatic Hold by ICM / CO / G-DN button
Selects to disconnect or hold a call when INTERCOM, CO, or G-DN button is pressed while
having a conversation.
Call Hold Mode
Selects which extension can retrieve a held call or a call that is transferred by Call Transfer
without Announcement feature.
SLT Hold Mode
Selects how to hold a line and transfer a call with an SLT.
System CODEC
Selects the CODEC type for PS. DefaultDisconnect
Va lu e Ra n g eDisconnect, Hold
Feature...](http://img.usermanuals.tech/thumb/58/64575/w64_kx-taw848_en_adv_feature_v1.1_om_d-313.png "Page 314
4.2 System [2]
314 Feature Guide
Automatic Hold by ICM / CO / G-DN button
Selects to disconnect or hold a call when INTERCOM, CO, or G-DN button is pressed while
having a conversation.
Call Hold Mode
Selects which extension can retrieve a held call or a call that is transferred by Call Transfer
without Announcement feature.
SLT Hold Mode
Selects how to hold a line and transfer a call with an SLT.
System CODEC
Selects the CODEC type for PS. DefaultDisconnect
Va lu e Ra n g eDisconnect, Hold
Feature...")
![Page 315
4.2 System [2]
Feature Guide 315
Extension Clear : Call Waiting
Specifies whether the Call Waiting setting is cleared when the Extension Feature Clear feature
is performed.
Extension Clear : FWD/DND
Specifies whether the FWD/DND setting is cleared when the Extension Feature Clear feature
is performed.
Extension Clear : Hot Line (Pickup Dial)
Specifies whether the Hot Line setting is cleared when the Extension Feature Clear feature is
performed.
Extension - CO Call Limitation
Selects whether the time...](http://img.usermanuals.tech/thumb/58/64575/w64_kx-taw848_en_adv_feature_v1.1_om_d-314.png "Page 315
4.2 System [2]
Feature Guide 315
Extension Clear : Call Waiting
Specifies whether the Call Waiting setting is cleared when the Extension Feature Clear feature
is performed.
Extension Clear : FWD/DND
Specifies whether the FWD/DND setting is cleared when the Extension Feature Clear feature
is performed.
Extension Clear : Hot Line (Pickup Dial)
Specifies whether the Hot Line setting is cleared when the Extension Feature Clear feature is
performed.
Extension - CO Call Limitation
Selects whether the time...")
![Page 316
4.2 System [2]
316 Feature Guide
Save the Dial as Redial after Called Party’s Answer
Specifies whether the number of the connected party to use for redialing is saved.
Automatic Time Adjustment by Caller ID (FSK) Service
Enables the PBX to adjust its clock everyday according to the time information that the network
provides with the first call after 3:05 AM.
4.2.22 System Options—Option 3 [2-9-3]
Various system settings can be programmed.
Confirmation Tone 1 : Press Doorphone Button / Receive Voice...](http://img.usermanuals.tech/thumb/58/64575/w64_kx-taw848_en_adv_feature_v1.1_om_d-315.png "Page 316
4.2 System [2]
316 Feature Guide
Save the Dial as Redial after Called Party’s Answer
Specifies whether the number of the connected party to use for redialing is saved.
Automatic Time Adjustment by Caller ID (FSK) Service
Enables the PBX to adjust its clock everyday according to the time information that the network
provides with the first call after 3:05 AM.
4.2.22 System Options—Option 3 [2-9-3]
Various system settings can be programmed.
Confirmation Tone 1 : Press Doorphone Button / Receive Voice...")
4.2 System [2] Feature Guide 311 4.2.20 System Options—Option 1 [2-9-1] Various system settings can be programmed. Time Display (12H/24H) Selects the time format shown on the displays of extensions. The time display format assigned here applies when setting time for the Timed Reminder. Date Display Selects the order month and date are shown on the displays of extensions. Password / PIN Display Mode Selects to hide or show passwords or PINs (Personal Identification Number) on the displays of extensions while entering them. DefaultTriple Va lu e Ra n g eSingle, Double, Triple Feature Guide References Feature References 1.1.3.2 Ring Tone Pattern Selection Programming References 4.4.1 Wired Extension—Extension Settings [4-1-1]—Main—Ring Pattern Table 4.4.7 Portable Station—Extension Settings [4-2-1]—Main—Ring Pattern Table Default12H Va lu e Ra n g e12H, 24H Feature Guide References Feature References 1.22.4 Timed Reminder Programming References None DefaultMonth-Date Va lu e Ra n g eDate-Month, Month-Date Feature Guide References None DefaultHide Va lu e Ra n g eDisplay, Hide Feature Guide References None
4.2 System [2] 312 Feature Guide LED Indication - FWD Selects the light pattern of the FWD/DND button while the FWD feature is activated. LED Indication - DND Selects the light pattern of the FWD/DND button while the DND feature is activated. SCO button operation during CO conversation Selects the function of the S-CO button while there is an ongoing CO line call. Ringing Time before Automatic Answer for Call from CO Specifies the number of times a PT in Hands-free Answerback mode will ring before a conversation is established automatically when it receives a call from a CO line. DefaultFlash Va lu e Ra n g eOn (Solid): Red on Flash: Slow red flashing Feature Guide References Feature References 1.3.1.1 Call Forwarding (FWD)/Do Not Disturb (DND)—OVERVIEW Programming References 4.4.2 Wired Extension—FWD/DND [4-1-2] 4.4.8 Portable Station—FWD/DND [4-2-2] DefaultOn (Solid) Va lu e Ra n g eOn (Solid): Red on Flash: Slow red flashing Feature Guide References Feature References 1.3.1.1 Call Forwarding (FWD)/Do Not Disturb (DND)—OVERVIEW Programming References 4.4.2 Wired Extension—FWD/DND [4-1-2] 4.4.8 Portable Station—FWD/DND [4-2-2] DefaultPrivacy release Va lu e Ra n g ePrivacy release, LCD switch Feature Guide References Feature References 1.13.1.3 Privacy Release Programming References None Default1 Ring Va lu e Ra n g e0 Ring, 1 Ring, 2 Rings, 3 Rings
4.2 System [2] Feature Guide 313 FWD/DND press mode on the idle status Selects the function of the FWD/DND button (fixed button) when it is pressed in idle status. (A FWD/DND button customized on a flexible button is always in FWD/DND Cycle Switch mode, and the mode cannot be changed.) 4.2.21 System Options—Option 2 [2-9-2] Various system settings can be programmed. Paging for DND Extension Specifies whether the extension can receive paging when in DND mode. Feature Guide References Feature References 1.4.1.4 Hands-free Answerback Programming References None DefaultFWD/DND Cycle Switch Mode Va lu e Ra n g eFWD/DND Setting Mode: Enter programming mode for the FWD/ DND setting. FWD/DND Cycle Switch Mode: Switch the FWD on/DND on/Off mode instead of entering the programming mode for the FWD/DND setting. (When there are separate FWD/DND settings for calls from CO lines and calls from extensions, mode switching cannot be performed.) Feature Guide References Feature References 1.3.1.1 Call Forwarding (FWD)/Do Not Disturb (DND)—OVERVIEW Programming References 4.4.2 Wired Extension—FWD/DND [4-1-2] 4.4.8 Portable Station—FWD/DND [4-2-2] DefaultDo Not Page Va lu e Ra n g eDo Not Page, Page Feature Guide References Feature References 1.14.1 Paging Programming References 4.4.2 Wired Extension—FWD/DND [4-1-2] 4.4.8 Portable Station—FWD/DND [4-2-2] 4.3.5 Paging Group [3-4]
4.2 System [2] 314 Feature Guide Automatic Hold by ICM / CO / G-DN button Selects to disconnect or hold a call when INTERCOM, CO, or G-DN button is pressed while having a conversation. Call Hold Mode Selects which extension can retrieve a held call or a call that is transferred by Call Transfer without Announcement feature. SLT Hold Mode Selects how to hold a line and transfer a call with an SLT. System CODEC Selects the CODEC type for PS. DefaultDisconnect Va lu e Ra n g eDisconnect, Hold Feature Guide References Feature References 1.12.1 Call Hold Programming References 4.4.4 Wired Extension—Flexible Key [4-1-4] 4.4.9 Portable Station—Flexible Key [4-2-3] DefaultHold Va lu e Ra n g eHold: Any extension can retrieve a held call. Exclusive Hold: Only the holding extension can retrieve a held call. Feature Guide References Feature References 1.12.1 Call Hold Programming References None DefaultMode 2 Va lu e Ra n g eMode 1, Mode 2, Mode 3, Mode 4 Feature Guide References Feature References 1.12.1 Call Hold Programming References None DefaultMu-Law Va lu e Ra n g eA-Law, Mu-Law Feature Guide References None
4.2 System [2] Feature Guide 315 Extension Clear : Call Waiting Specifies whether the Call Waiting setting is cleared when the Extension Feature Clear feature is performed. Extension Clear : FWD/DND Specifies whether the FWD/DND setting is cleared when the Extension Feature Clear feature is performed. Extension Clear : Hot Line (Pickup Dial) Specifies whether the Hot Line setting is cleared when the Extension Feature Clear feature is performed. Extension - CO Call Limitation Selects whether the time limit for extension-to-CO line calls applies to outgoing calls only or for both outgoing and incoming calls. COS determines the use of this feature, and the length of time limit can be assigned on a CO line group basis. DefaultClear Va lu e Ra n g eNo Clear, Clear Feature Guide References Feature References 1.22.2 Extension Feature Clear Programming References None DefaultClear Va lu e Ra n g eNo Clear, Clear Feature Guide References Feature References 1.22.2 Extension Feature Clear Programming References None DefaultClear Va lu e Ra n g eNo Clear, Clear Feature Guide References Feature References 1.22.2 Extension Feature Clear Programming References None Defaultfor Outgoing Va lu e Ra n g efor Outgoing, for Outgoing + Incoming
4.2 System [2] 316 Feature Guide Save the Dial as Redial after Called Party’s Answer Specifies whether the number of the connected party to use for redialing is saved. Automatic Time Adjustment by Caller ID (FSK) Service Enables the PBX to adjust its clock everyday according to the time information that the network provides with the first call after 3:05 AM. 4.2.22 System Options—Option 3 [2-9-3] Various system settings can be programmed. Confirmation Tone 1 : Press Doorphone Button / Receive Voice Call Enables the PBX to send Confirmation Tone 1. Confirmation Tone 1 is heard from a doorphone when the doorphone button is pressed, or from a PT when it receives a call in voice-calling mode. Feature Guide References Feature References 1.10.7 CO Line Call Limitation Programming References 4.2.14 Class of Service—COS Settings [2-7-1]—TRS / CO—Extension-CO Line Call Duration Limit 4.3.1 Trunk Group—TRG Settings [3-1-1]—Main—Extension-CO Duration Time DefaultYe s Va lu e Ra n g eNo, Yes Feature Guide References Feature References 1.6.1.3 Last Number Redial Programming References None DefaultEnable Va lu e Ra n g eDisable, Enable Feature Guide References Feature References 2.3.4 Automatic Time Adjustment Programming References None DefaultEnable Va lu e Ra n g eDisable, Enable
4.2 System [2] Feature Guide 317 Confirmation Tone 2 : Paged / Auto Answer Enables the PBX to send Confirmation Tone 2. Confirmation Tone 2 is heard from a PT when it receives paging or a call in Hands-free Answerback mode. Confirmation Tone 3-1 : Start Talking after Making Call Enables the PBX to send Confirmation Tone 3-1. Confirmation Tone 3-1 is heard from an extension when, for example, it pages another extension. Confirmation Tone 3-2 : Start Talking after Answering Call Enables the PBX to send Confirmation Tone 3-2. Confirmation Tone 3-2 is heard from an extension when answers a call by, for example, the Call Pickup feature. Confirmation Tone 4-1 : Start Conference Enables the PBX to send Confirmation Tone 4-1. Confirmation Tone 4-1 is heard from an extension when a new party joins a conference call. Feature Guide References Feature References 1.23.2 Confirmation Tone Programming References None DefaultEnable Va lu e Ra n g eDisable, Enable Feature Guide References Feature References 1.23.2 Confirmation Tone Programming References None DefaultEnable Va lu e Ra n g eDisable, Enable Feature Guide References Feature References 1.23.2 Confirmation Tone Programming References None DefaultEnable Va lu e Ra n g eDisable, Enable Feature Guide References Feature References 1.23.2 Confirmation Tone Programming References None
4.2 System [2] 318 Feature Guide Confirmation Tone 4-2 : Finish Conference Enables the PBX to send Confirmation Tone 4-2. Confirmation Tone 4-2 is heard from an extension when a party leaves a conference call. Confirmation Tone 5 : Hold Enables the PBX to send Confirmation Tone 5. Confirmation Tone 5 is heard from an extension when it holds a call. Distinctive Dial Tone Enables the PBX to send dial tones at different frequencies depending on the setting of an extension. DefaultEnable Va lu e Ra n g eDisable, Enable Feature Guide References Feature References 1.23.2 Confirmation Tone Programming References None DefaultEnable Va lu e Ra n g eDisable, Enable Feature Guide References Feature References 1.23.2 Confirmation Tone Programming References None DefaultEnable Va lu e Ra n g eDisable, Enable Feature Guide References Feature References 1.23.2 Confirmation Tone Programming References None DefaultEnable Va lu e Ra n g eDisable, Enable Feature Guide References Feature References 1.23.1 Dial Tone Programming References None
4.2 System [2] Feature Guide 319 D i a l To n e Ty p e f o r E x t e n s i o n Selects the dial tone the PBX sends to the extensions to inform of the features activated on them. Dial Tone Type for ARS Selects the dial tone the PBX sends to the caller instead of the network when a call is made by the ARS feature. Echo Cancel Control for Conference Enables the use of the ECHO card (installed in an Option Slot) for conference calls. Echo Cancel Control for CO to CO Enables the use of the ECHO card (installed in an Option Slot) for CO-to-CO line calls. Echo Cancel Control for Extension to Analog Line Enables the use of the ECHO card (installed in an Option Slot) for extension-to-analog CO line calls. DefaultTy p e A Va lu e Ra n g eTy p e A , Ty p e B Feature Guide References Feature References 1.23.1 Dial Tone Programming References None DefaultTy p e B Va lu e Ra n g eTy p e A , Ty p e B Feature Guide References Feature References 1.23.1 Dial Tone Programming References 4.8.1 System Setting [8-1] DefaultEnable Va lu e Ra n g eDisable, Enable Feature Guide References None DefaultEnable Va lu e Ra n g eDisable, Enable Feature Guide References None DefaultDisable
4.2 System [2] 320 Feature Guide Timed Reminder Message - Day, Lunch, Break, Night Specifies the prerecorded message to play when answering the Timed Reminder in each time mode. Transfer to busy extension without BSS operation Enables a transferred call to queue when the transfer destination is busy. 4.2.23 System Options—Option 4 [2-9-4] Various system settings can be programmed. It is possible to clear the master CS information (Master CS Port and Radio System ID) by following the procedure below in the batch mode: 1.Click Clear Master CS. 2.Click OK. To abort the procedure, click Cancel. If the system data is downloaded to the PBX after the master CS information has been cleared, it is necessary to register all PSs again in the interactive mode. Master CS information will be assigned automatically when a CS is connected to the PBX. Without the Radio System ID, PSs cannot be registered. Va lu e Ra n g eDisable, Enable Feature Guide References None DefaultNone Va lu e Ra n g eNone, 1–32 Feature Guide References Feature References 1.22.4 Timed Reminder Programming References 4.5.4 DISA—Message Setting [5-3-2] DefaultDisable Va lu e Ra n g eDisable: The call is not transferred. (If the transfer destination sets call waiting notification feature, it is possible to inform of transferring a call.) Enable: The transferred call queues to be answered for a time period specified in Transfer Recall Timer in Timers & Counters— CO / Extension [2-4-1]. Feature Guide References Feature References None Programming References 4.2.5 Timers & Counters—CO / Extension [2-4-1]—Transfer Recall Timer