Panasonic Kx Taw848 Feature Manual

							4.2 System [2]
Feature Guide 301
4.2.14 Class of Service—COS Settings [2-7-1]
Each extension, doorphone port, incoming call distribution group, and CO line group belongs 
to a certain COS. Certain features can be programmed to behave differently depending on the 
COS. A maximum of 64 COS can be programmed.
TRS / CO
Restrictions to features related to making CO line calls can be programmed for each COS.
COS Name
Specifies the name of the COS.
TRS Level—Day, Lunch, Break, Night
Specifies the Toll Restriction (TRS) level for making CO line calls in each time mode.
TRS Level on Extension Lock
Specifies the TRS level for making CO line calls when an extension is locked. DefaultNot stored.
Va lu e  Ra n g eMax. 20 characters
Feature Guide References
None
Default1
Va lu e  Ra n g e1: Allows all CO line calls
2–6: Restricts CO line calls according to the combination of the 
Denied and Exception Code Tables
7: Restricts all CO line calls
Feature Guide References
Feature References
1.8.1 Toll Restriction (TRS)
Programming References
4.2.8 Time Service—Week Table [2-5-1]
4.3.1 Trunk Group—TRG Settings [3-1-1]—Main—COS
4.3.6 Incoming Call Distribution Group—Group Settings [3-5-1]—Main—COS
4.4.1 Wired Extension—Extension Settings [4-1-1]—Main—COS
4.4.7 Portable Station—Extension Settings [4-2-1]—Main—COS
4.5.1 Doorphone [5-1]—COS
4.7.1 Denied Code [7-1]
4.7.2 Exception Code [7-2]
Default7
Va lu e  Ra n g e1: Allows all CO line calls
2–6: Restricts CO line calls according to the combination of the 
Denied and Exception Code Tables
7: Restricts all CO line calls 
						

							4.2 System [2]
302 Feature Guide
TRS Level for System Speed Dialing
Specifies the TRS level for making a CO line call using System Speed Dialing numbers, which 
overrides the TRS set for the current time mode. 
Extension-CO Line Call Duration Limit
Enables the extension-to-CO line call duration feature. The length of the call duration can be 
programmed. 
Transfer to CO
Enables the transferring of a call to a CO line.
Feature Guide References
Feature References
1.8.2 Extension Lock
Programming References
4.4.1 Wired Extension—Extension Settings [4-1-1]—Main—COS
4.4.7 Portable Station—Extension Settings [4-2-1]—Main—COS
4.7.1 Denied Code [7-1]
4.7.2 Exception Code [7-2]
Default1
Va lu e  Ra n g e1: Allows all CO line calls
2–6: Restricts CO line calls according to the combination of the 
Denied and Exception Code Tables
7: Restricts all CO line calls
Feature Guide References
Feature References
1.8.1 Toll Restriction (TRS)
Programming References
4.4.1 Wired Extension—Extension Settings [4-1-1]—Main—COS
4.4.7 Portable Station—Extension Settings [4-2-1]—Main—COS
4.6.1 Speed Dialing & Caller ID—Main Table [6-1-1]
4.7.4 Miscellaneous [7-4]—TRS Override by System Speed Dialing
DefaultDisable
Va lu e  Ra n g eDisable, Enable
Feature Guide References
Feature References
1.10.7 CO Line Call Limitation
Programming References
4.2.21 System Options—Option 2 [2-9-2]—Extension - CO Call Limitation
4.3.1 Trunk Group—TRG Settings [3-1-1]—Main—COS
4.4.1 Wired Extension—Extension Settings [4-1-1]—Main—COS
4.4.7 Portable Station—Extension Settings [4-2-1]—Main—COS 
						

							4.2 System [2]
Feature Guide 303
Call Forward to CO
Enables the forwarding of a call to a CO line.
Main
The use of features related to extension operations can be programmed for each COS.
COS Name
Specifies the name of the COS.
Account Code Mode
Specifies whether the entry of an account code is optional or mandatory when making a CO 
line call. DefaultDisable
Va lu e  Ra n g eDisable, Enable
Feature Guide References
Feature References
1.11.1 Call Transfer
Programming References
4.4.1 Wired Extension—Extension Settings [4-1-1]—Main—COS
4.4.7 Portable Station—Extension Settings [4-2-1]—Main—COS
DefaultDisable
Va lu e  Ra n g eDisable, Enable
Feature Guide References
Feature References
1.3.1.2 Call Forwarding (FWD)
Programming References
4.4.1 Wired Extension—Extension Settings [4-1-1]—Main—COS
4.4.2 Wired Extension—FWD/DND [4-1-2]
4.4.7 Portable Station—Extension Settings [4-2-1]—Main—COS
4.4.8 Portable Station—FWD/DND [4-2-2]
DefaultNot stored.
Va lu e  Ra n g eMax. 20 characters
Feature Guide References
None
DefaultOption
Va lu e  Ra n g eOption, Forced
Feature Guide References
Feature References
1.5.4.3 Account Code Entry 
						

							4.2 System [2]
304 Feature Guide
Outgoing CO Call Printout (SMDR)
Enables the automatic recording of outgoing CO line calls for SMDR output.
Executive Busy Override
Enables the authorization for interrupting an existing call to establish a three-party conference 
call.
DND Override
Enables the authorization for making a call to an extension in DND mode by entering the 
feature number.Programming References
4.4.1 Wired Extension—Extension Settings [4-1-1]—Main—COS
4.4.7 Portable Station—Extension Settings [4-2-1]—Main—COS
DefaultEnable
Va lu e  Ra n g eDisable, Enable
Feature Guide References
Feature References
1.21.1 Station Message Detail Recording (SMDR)
Programming References
4.4.1 Wired Extension—Extension Settings [4-1-1]—Main—COS
4.4.7 Portable Station—Extension Settings [4-2-1]—Main—COS
4.10.1 SMDR [10-1]
DefaultDisable
Va lu e  Ra n g eDisable, Enable
Feature Guide References
Feature References
1.7.2 Executive Busy Override
Programming References
4.4.1 Wired Extension—Extension Settings [4-1-1]—Main—COS
4.4.7 Portable Station—Extension Settings [4-2-1]—Main—COS
DefaultDisable
Va lu e  Ra n g eDisable, Enable
Feature Guide References
Feature References
1.3.1.3 Do Not Disturb (DND)
Programming References
4.4.1 Wired Extension—Extension Settings [4-1-1]—Main—COS
4.4.2 Wired Extension—FWD/DND [4-1-2]
4.4.7 Portable Station—Extension Settings [4-2-1]
4.4.8 Portable Station—FWD/DND [4-2-2]—Main—COS 
						

							4.2 System [2]
Feature Guide 305
Door Unlock
Enables the authorization to open the door.
Call Monitor
Enables the authorization for listening to a busy extension’s conversation.
Options
The use of features related to extension settings can be programmed for each COS.
COS Name
Specifies the name of the COS.
Time Service Switch
Enables the authorization to switch time modes manually. DefaultEnable
Va lu e  Ra n g eDisable, Enable
Feature Guide References
Feature References
1.15.2 Door Open
Programming References
4.4.1 Wired Extension—Extension Settings [4-1-1]—Main—COS
4.4.7 Portable Station—Extension Settings [4-2-1]—Main—COS
DefaultDisable
Va lu e  Ra n g eDisable, Enable
Feature Guide References
Feature References
1.7.3 Call Monitor
Programming References
4.4.1 Wired Extension—Extension Settings [4-1-1]—COS
4.4.7 Portable Station—Extension Settings [4-2-1]—COS
DefaultNot stored.
Va lu e  Ra n g eMax. 20 characters
Feature Guide References
None
DefaultDisable
Va lu e  Ra n g eDisable, Enable
Feature Guide References
Feature References
2.2.4 Time Service 
						

							4.2 System [2]
306 Feature Guide
Executive Busy Override Deny
Enables the authorization to prevent other extensions from interrupting calls.
Group Forward Set
Enables setting call forwarding for calls to an incoming call distribution group. 
Deny Remote Operation by Other Extension
Enables the authorization to use the Walking COS or Remote Extension Control feature from 
a remote location (inside, or outside the PBX using DISA).Programming References
4.2.8 Time Service—Week Table [2-5-1]
4.4.1 Wired Extension—Extension Settings [4-1-1]—Main—COS
4.4.7 Portable Station—Extension Settings [4-2-1]—Main—COS
DefaultDisable
Va lu e  Ra n g eDisable, Enable
Feature Guide References
Feature References
2.2.1 Class of Service (COS)
Programming References
4.4.1 Wired Extension—Extension Settings [4-1-1]—Main—COS
4.4.7 Portable Station—Extension Settings [4-2-1]—Main—COS
DefaultEnable-Group
Va lu e  Ra n g eDisable: An extension cannot set call forwarding for any group.
Enable-All: An extension can set call forwarding for all groups.
Enable-Group: An extension can only set call forwarding for the 
group to which the extension belongs.
Feature Guide References
Feature References
1.3.1.2 Call Forwarding (FWD)
Programming References
4.3.7 Incoming Call Distribution Group—Member [3-5-2]
4.4.1 Wired Extension—Extension Settings [4-1-1]—Main—COS
4.4.7 Portable Station—Extension Settings [4-2-1]—Main—COS
DefaultDisable 
Va lu e  Ra n g eDisable, Enable
Feature Guide References
Feature References
1.8.4 Walking COS
1.22.5 Remote Extension Control by User 
						

							4.2 System [2]
Feature Guide 307
Accept the Call from DISA
Enables the authorization to receive calls from DISA.
Accept Wireless XDP Parallel Set by Other PS
Enables the authorization to allow Wireless XDP Parallel Mode to be set by a PS.
Programming Mode Level
Specifies the level of authorization for performing PT programming.
Manager
Specifies the authorization to use manager features.Programming References
4.4.1 Wired Extension—Extension Settings [4-1-1]—Main—COS
4.4.7 Portable Station—Extension Settings [4-2-1]—Main—COS
DefaultEnable
Va lu e  Ra n g eDisable, Enable
Feature Guide References
Feature References
1.15.6 Direct Inward System Access (DISA)
Programming References
4.4.1 Wired Extension—Extension Settings [4-1-1]—Main—COS
4.4.7 Portable Station—Extension Settings [4-2-1]—Main—COS
4.5.4 DISA—Message Setting [5-3-2]
DefaultEnable
Va lu e  Ra n g eDisable, Enable
Feature Guide References
Feature References
1.20.3 Wireless XDP Parallel Mode
Programming References
4.4.1 Wired Extension—Extension Settings [4-1-1]—Main—COS
DefaultPROG Only
Va lu e  Ra n g eDisable: A PT user cannot perform any programming.
PROG Only: A PT user can perform only personal programming.
PROG and PROG **/*#: A PT user can perform personal and 
system programming.
Feature Guide References
Feature References
2.3.2 PT Programming
Programming References
4.4.1 Wired Extension—Extension Settings [4-1-1]—Main—COS
4.4.7 Portable Station—Extension Settings [4-2-1]—Main—COS 
						

							4.2 System [2]
308 Feature Guide
4.2.15 Class of Service—External Call Block [2-7-2]
Each COS can have different CO line groups available for making CO line calls, depending on 
the time mode (day/lunch/break/night). Select the desired time mode from the list.
Outgoing Trunk Group 1–64
Specifies the available CO line groups.
4.2.16 Class of Service—Internal Call Block [2-7-3]
Internal Call Block determines the restrictions placed on making intercom calls. The 
extensions, incoming call distribution groups, and doorphones belonging to a certain COS can 
be programmed to not receive intercom calls from those belonging to a certain COS. 
COS Number of the Extension Which Receive the Call from Other Extension 1–64
Specifies the COS combination that blocks intercom calls. DefaultDisable
Va lu e  Ra n g eDisable, Enable
Feature Guide References
Feature References
2.2.6 Manager Features
Programming References
4.4.1 Wired Extension—Extension Settings [4-1-1]—Main—COS
4.4.7 Portable Station—Extension Settings [4-2-1]—Main—COS
DefaultAll Trunk groups: Non Block
Va lu e  Ra n g eBlock, Non Block
Feature Guide References
Feature References
1.5.5.3 CO Line Access
Programming References
4.2.8 Time Service—Week Table [2-5-1]
4.4.1 Wired Extension—Extension Settings [4-1-1]
4.4.7 Portable Station—Extension Settings [4-2-1]
4.9.1 CO Line Setting [9-1]
DefaultAll extensions: Non Block
Va lu e  Ra n g eBlock, Non Block
Feature Guide References
Feature References
1.1.2.2 Internal Call Block 
						

							4.2 System [2]
Feature Guide 309
4.2.17 Ring Tone Patterns—Call from CO [2-8-1]
Different ring tone patterns can be selected for incoming CO line calls depending on the CO 
line groups the calls come through. A maximum of 8 Ring Tone Pattern Tables can be 
programmed, and any pattern table can be selected for use by an extension.
Ring Tone Pattern Table 1–8
Specifies the ring tone pattern for incoming CO line calls.
4.2.18 Ring Tone Patterns—Call from Doorphone [2-8-2]
Different ring tone patterns can be selected for incoming doorphone calls depending on the 
doorphone ports the calls come through. A maximum of 8 Ring Tone Pattern Tables can be 
programmed, and any pattern table can be selected for use by an extension.
Ring Tone Pattern Table 1–8
Specifies the ring tone pattern for incoming doorphone calls.Programming References
4.3.6 Incoming Call Distribution Group—Group Settings [3-5-1]—Main—COS
4.4.1 Wired Extension—Extension Settings [4-1-1]—Main—COS
4.4.7 Portable Station—Extension Settings [4-2-1]—Main—COS
4.5.1 Doorphone [5-1]—COS
DefaultSingle
Va lu e  Ra n g eSingle, Double, Triple
Feature Guide References
Feature References
1.1.3.2 Ring Tone Pattern Selection
Programming References
4.9.1 CO Line Setting [9-1]—Trunk Group Number
4.4.1 Wired Extension—Extension Settings [4-1-1]—Main—Ring Pattern Table
4.4.7 Portable Station—Extension Settings [4-2-1]—Main—Ring Pattern Table
DefaultTriple
Va lu e  Ra n g eSingle, Double, Triple, S-Double
Feature Guide References
Feature References
1.1.3.2 Ring Tone Pattern Selection
Programming References
4.4.1 Wired Extension—Extension Settings [4-1-1]—Main—Ring Pattern Table
4.4.7 Portable Station—Extension Settings [4-2-1]—Main—Ring Pattern Table
4.5.1 Doorphone [5-1] 
						

							4.2 System [2]
310 Feature Guide
4.2.19 Ring Tone Patterns—Call from Others [2-8-3]
Different ring tone patterns can be selected for incoming intercom calls and ringing triggered 
by certain PBX features (Timed Reminder, Call Back, and Live Call Screening). A maximum of 
8 Ring Tone Pattern Tables can be programmed, and any pattern table can be selected for use 
by an extension.
Extension—Ring Tone Pattern Table 1–8
Specifies the ring tone pattern for incoming intercom calls.
Timed Reminder—Ring Tone Pattern Table 1–8
Specifies the ring tone pattern for alarm ringing by Timed Reminder.
Call Back—Ring Tone Pattern Table 1–8
Specifies the ring tone pattern for callback ringing by Automatic Callback Busy.
Live Call Screening—Ring Tone Pattern Table 1–8
Specifies the ring tone pattern for alarm ringing by LCS. DefaultDouble
Va lu e  Ra n g eSingle, Double, Triple
Feature Guide References
Feature References
1.1.3.2 Ring Tone Pattern Selection
Programming References
4.4.1 Wired Extension—Extension Settings [4-1-1]—Main—Ring Pattern Table
4.4.7 Portable Station—Extension Settings [4-2-1]—Main—Ring Pattern Table
DefaultTriple
Va lu e  Ra n g eSingle, Double, Triple
Feature Guide References
Feature References
1.1.3.2 Ring Tone Pattern Selection
Programming References
4.4.1 Wired Extension—Extension Settings [4-1-1]—Main—Ring Pattern Table
4.4.7 Portable Station—Extension Settings [4-2-1]—Main—Ring Pattern Table
DefaultS-Double
Va lu e  Ra n g eSingle, Double, Triple, S-Double
Feature Guide References
Feature References
1.1.3.2 Ring Tone Pattern Selection
Programming References
4.4.1 Wired Extension—Extension Settings [4-1-1]—Main—Ring Pattern Table
4.4.7 Portable Station—Extension Settings [4-2-1]—Main—Ring Pattern Table