Panasonic Kx Taw848 Feature Manual
Have a look at the manual Panasonic Kx Taw848 Feature Manual online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 10737 Panasonic manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.
![Page 386
4.4 Extension [4]
386 Feature Guide
Call from Extension—FWD Mode
Specifies the circumstances when incoming intercom calls are forwarded.
Call from Extension—FWD Destination
Specifies the forwarding destination of incoming intercom calls.
FWD No Answer Timer
Specifies the length of time an incoming call rings at the extension before the call is forwarded.
4.4.3 Wired Extension—Speed Dial [4-1-3]
Personal Speed Dialing allows extension users to dial frequently dialed numbers using two-
digit speed dialing...](http://img.usermanuals.tech/thumb/58/64575/w64_kx-taw848_en_adv_feature_v1.1_om_d-385.png "Page 386
4.4 Extension [4]
386 Feature Guide
Call from Extension—FWD Mode
Specifies the circumstances when incoming intercom calls are forwarded.
Call from Extension—FWD Destination
Specifies the forwarding destination of incoming intercom calls.
FWD No Answer Timer
Specifies the length of time an incoming call rings at the extension before the call is forwarded.
4.4.3 Wired Extension—Speed Dial [4-1-3]
Personal Speed Dialing allows extension users to dial frequently dialed numbers using two-
digit speed dialing...")
![Page 387
4.4 Extension [4]
Feature Guide 387
be programmed for each extension. Select the desired extension from the Extension Number
/ Name list.
Speed Dialing Name
Specifies the name of the Personal Speed Dialing number to call using the Personal Speed
Dialing Directory shown on the extension’s display. As for the available characters, refer to the
character code table described in section 3.2.1 Installing and Starting KX-TAW848
Maintenance Console.
Dialing Number
Specifies the number to be dialed by the...](http://img.usermanuals.tech/thumb/58/64575/w64_kx-taw848_en_adv_feature_v1.1_om_d-386.png "Page 387
4.4 Extension [4]
Feature Guide 387
be programmed for each extension. Select the desired extension from the Extension Number
/ Name list.
Speed Dialing Name
Specifies the name of the Personal Speed Dialing number to call using the Personal Speed
Dialing Directory shown on the extension’s display. As for the available characters, refer to the
character code table described in section 3.2.1 Installing and Starting KX-TAW848
Maintenance Console.
Dialing Number
Specifies the number to be dialed by the...")
![Page 388
4.4 Extension [4]
388 Feature Guide
Parameter Selection (for Single CO)
Specifies the CO line to be accessed.
Parameter Selection (for Group CO)
Specifies the CO line group to be accessed.
Parameter Selection (for Call Park)
Specifies whether a call is parked in an idle parking zone automatically or in a specific parking
zone. Va lu e Ra n g eNot Stored, Loop CO, Single CO, Group CO, DSS, One-touch, G-
DN, Message Waiting, FWD/DND (Both), FWD/DND (External),
FWD/DND (Internal), Group FWD (Both), Group...](http://img.usermanuals.tech/thumb/58/64575/w64_kx-taw848_en_adv_feature_v1.1_om_d-387.png "Page 388
4.4 Extension [4]
388 Feature Guide
Parameter Selection (for Single CO)
Specifies the CO line to be accessed.
Parameter Selection (for Group CO)
Specifies the CO line group to be accessed.
Parameter Selection (for Call Park)
Specifies whether a call is parked in an idle parking zone automatically or in a specific parking
zone. Va lu e Ra n g eNot Stored, Loop CO, Single CO, Group CO, DSS, One-touch, G-
DN, Message Waiting, FWD/DND (Both), FWD/DND (External),
FWD/DND (Internal), Group FWD (Both), Group...")
![Page 389
4.4 Extension [4]
Feature Guide 389
Parameter Selection (for Log-in/Log-out)
Specifies which incoming call distribution groups that the extension belongs to are logged-in to
or logged-out from.
Parameter Selection (for Time Service)
Selects which time modes are switched manually.
Parameter Selection (for TRS Level Change)
Specifies the TRS level to be used temporarily on a certain extension.
Feature Guide References
Feature References
1.12.2 Call Park
1.18.2 Flexible Buttons
Programming References...](http://img.usermanuals.tech/thumb/58/64575/w64_kx-taw848_en_adv_feature_v1.1_om_d-388.png "Page 389
4.4 Extension [4]
Feature Guide 389
Parameter Selection (for Log-in/Log-out)
Specifies which incoming call distribution groups that the extension belongs to are logged-in to
or logged-out from.
Parameter Selection (for Time Service)
Selects which time modes are switched manually.
Parameter Selection (for TRS Level Change)
Specifies the TRS level to be used temporarily on a certain extension.
Feature Guide References
Feature References
1.12.2 Call Park
1.18.2 Flexible Buttons
Programming References...")
![Page 390
4.4 Extension [4]
390 Feature Guide
Parameter Selection (for Time Service - Automatic / Manual)
Specifies the Time Table to be used when the Time Service Switching Mode is set to
automatic.
Ext No. or Floating Ext No. (for DSS)
Specifies the number of an extension to be accessed.
Ext No. or Floating Ext No. (for G-DN)
Specifies the floating extension number of an incoming call distribution group to be accessed.
Ext No. or Floating Ext No. (for Message Waiting)
Specifies the number of an extension or...](http://img.usermanuals.tech/thumb/58/64575/w64_kx-taw848_en_adv_feature_v1.1_om_d-389.png "Page 390
4.4 Extension [4]
390 Feature Guide
Parameter Selection (for Time Service - Automatic / Manual)
Specifies the Time Table to be used when the Time Service Switching Mode is set to
automatic.
Ext No. or Floating Ext No. (for DSS)
Specifies the number of an extension to be accessed.
Ext No. or Floating Ext No. (for G-DN)
Specifies the floating extension number of an incoming call distribution group to be accessed.
Ext No. or Floating Ext No. (for Message Waiting)
Specifies the number of an extension or...")
![Page 391
4.4 Extension [4]
Feature Guide 391
Ext No. or Floating Ext No. (for Group FWD (Both))
Specifies the floating extension number of an incoming call distribution group to which both
intercom and CO line calls are forwarded.
Ext No. or Floating Ext No. (for Group FWD (External))
Specifies the floating extension number of an incoming call distribution group to which CO line
calls are forwarded.
Ext No. or Floating Ext No. (for Group FWD (Internal))
Specifies the floating extension number of an incoming...](http://img.usermanuals.tech/thumb/58/64575/w64_kx-taw848_en_adv_feature_v1.1_om_d-390.png "Page 391
4.4 Extension [4]
Feature Guide 391
Ext No. or Floating Ext No. (for Group FWD (Both))
Specifies the floating extension number of an incoming call distribution group to which both
intercom and CO line calls are forwarded.
Ext No. or Floating Ext No. (for Group FWD (External))
Specifies the floating extension number of an incoming call distribution group to which CO line
calls are forwarded.
Ext No. or Floating Ext No. (for Group FWD (Internal))
Specifies the floating extension number of an incoming...")
![Page 392
4.4 Extension [4]
392 Feature Guide
Ext No. or Floating Ext No. (for Call Log)
Specifies the extension’s own number or the floating extension number of an incoming call
distribution group for which call log information is displayed. If the cell is left empty, the
extension will display its own call log information.
Ext No. or Floating Ext No. (for Log-in/Log-out)
Specifies the floating extension number of an incoming call distribution group to log-in to or log-
out from.
Ext No. or Floating Ext No....](http://img.usermanuals.tech/thumb/58/64575/w64_kx-taw848_en_adv_feature_v1.1_om_d-391.png "Page 392
4.4 Extension [4]
392 Feature Guide
Ext No. or Floating Ext No. (for Call Log)
Specifies the extension’s own number or the floating extension number of an incoming call
distribution group for which call log information is displayed. If the cell is left empty, the
extension will display its own call log information.
Ext No. or Floating Ext No. (for Log-in/Log-out)
Specifies the floating extension number of an incoming call distribution group to log-in to or log-
out from.
Ext No. or Floating Ext No....")
![Page 393
4.4 Extension [4]
Feature Guide 393
Ext No. or Floating Ext No. (for Two-way Transfer)
Specifies the floating extension number of the VM (DPT) group containing the desired mailbox.
Ext No. or Floating Ext No. (for Voice Mail Transfer)
Specifies the floating extension number of the VM (DTMF/DPT) group containing the desired
mailbox.
Dial (for One-touch)
Specifies the number to be dialed. The PBX can have a maximum of 1000 One-touch Dialing
buttons for extensions and DSS Consoles.
Optional parameter (or...](http://img.usermanuals.tech/thumb/58/64575/w64_kx-taw848_en_adv_feature_v1.1_om_d-392.png "Page 393
4.4 Extension [4]
Feature Guide 393
Ext No. or Floating Ext No. (for Two-way Transfer)
Specifies the floating extension number of the VM (DPT) group containing the desired mailbox.
Ext No. or Floating Ext No. (for Voice Mail Transfer)
Specifies the floating extension number of the VM (DTMF/DPT) group containing the desired
mailbox.
Dial (for One-touch)
Specifies the number to be dialed. The PBX can have a maximum of 1000 One-touch Dialing
buttons for extensions and DSS Consoles.
Optional parameter (or...")
![Page 394
4.4 Extension [4]
394 Feature Guide
Optional parameter (or Ringing Tone Type Number) (for Loop CO, Single CO, Group
CO, G-DN)
Specifies the ring tone type.
Optional parameter (or Ringing Tone Type Number) (for Call Park)
Specifies the number of the parking zone a call is to be parked by pressing the Call Park button
whose Parameter Selection on this screen is Specific.
Extension Number of Mailbox (for Two-way Transfer)
Specifies the number of the extension whose mailbox will be used to record...](http://img.usermanuals.tech/thumb/58/64575/w64_kx-taw848_en_adv_feature_v1.1_om_d-393.png "Page 394
4.4 Extension [4]
394 Feature Guide
Optional parameter (or Ringing Tone Type Number) (for Loop CO, Single CO, Group
CO, G-DN)
Specifies the ring tone type.
Optional parameter (or Ringing Tone Type Number) (for Call Park)
Specifies the number of the parking zone a call is to be parked by pressing the Call Park button
whose Parameter Selection on this screen is Specific.
Extension Number of Mailbox (for Two-way Transfer)
Specifies the number of the extension whose mailbox will be used to record...")
![Page 395
4.4 Extension [4]
Feature Guide 395
4.4.5 Wired Extension—Flexible Key [4-1-4] Flexible Key
Data Copy
The flexible CO button settings of an extension can be copied to different extensions. Select
the extension that has the settings to copy to other extensions from the Extension Number /
Name list, then click Copy To.
Destination Extension Line
Select the number and name of the extension that will receive the copied settings. Multiple
extensions can be selected. To select all extensions at once, click...](http://img.usermanuals.tech/thumb/58/64575/w64_kx-taw848_en_adv_feature_v1.1_om_d-394.png "Page 395
4.4 Extension [4]
Feature Guide 395
4.4.5 Wired Extension—Flexible Key [4-1-4] Flexible Key
Data Copy
The flexible CO button settings of an extension can be copied to different extensions. Select
the extension that has the settings to copy to other extensions from the Extension Number /
Name list, then click Copy To.
Destination Extension Line
Select the number and name of the extension that will receive the copied settings. Multiple
extensions can be selected. To select all extensions at once, click...")
![Page 396
4.4 Extension [4]
396 Feature Guide
4.4.7 Portable Station—Extension Settings [4-2-1]
For each Portable Station (PS), various extension settings can be assigned. A maximum of 28
PSs can be programmed.
Main
Extension Number
Indicates the extension number of the PS (reference only).
Extension Name
Specifies the name of the PS. As for the available characters, refer to the character code table
described in section 3.2.1 Installing and Starting KX-TAW848 Maintenance Console.
Property
Indicates the property...](http://img.usermanuals.tech/thumb/58/64575/w64_kx-taw848_en_adv_feature_v1.1_om_d-395.png "Page 396
4.4 Extension [4]
396 Feature Guide
4.4.7 Portable Station—Extension Settings [4-2-1]
For each Portable Station (PS), various extension settings can be assigned. A maximum of 28
PSs can be programmed.
Main
Extension Number
Indicates the extension number of the PS (reference only).
Extension Name
Specifies the name of the PS. As for the available characters, refer to the character code table
described in section 3.2.1 Installing and Starting KX-TAW848 Maintenance Console.
Property
Indicates the property...")
4.4 Extension [4] Feature Guide 391 Ext No. or Floating Ext No. (for Group FWD (Both)) Specifies the floating extension number of an incoming call distribution group to which both intercom and CO line calls are forwarded. Ext No. or Floating Ext No. (for Group FWD (External)) Specifies the floating extension number of an incoming call distribution group to which CO line calls are forwarded. Ext No. or Floating Ext No. (for Group FWD (Internal)) Specifies the floating extension number of an incoming call distribution group to which intercom calls are forwarded. Feature Guide References Feature References 1.18.2 Flexible Buttons Programming References 4.4.5 Wired Extension—Flexible Key [4-1-4] Flexible Key Data Copy DefaultNot stored. Va lu e Ra n g eMax. 4 digits (consisting of 0–9) Feature Guide References Feature References 1.18.2 Flexible Buttons Programming References 4.4.5 Wired Extension—Flexible Key [4-1-4] Flexible Key Data Copy DefaultNot stored. Va lu e Ra n g eMax. 4 digits (consisting of 0–9) Feature Guide References Feature References 1.18.2 Flexible Buttons Programming References 4.4.5 Wired Extension—Flexible Key [4-1-4] Flexible Key Data Copy DefaultNot stored. Va lu e Ra n g eMax. 4 digits (consisting of 0–9) Feature Guide References Feature References 1.18.2 Flexible Buttons Programming References 4.4.5 Wired Extension—Flexible Key [4-1-4] Flexible Key Data Copy
4.4 Extension [4] 392 Feature Guide Ext No. or Floating Ext No. (for Call Log) Specifies the extension’s own number or the floating extension number of an incoming call distribution group for which call log information is displayed. If the cell is left empty, the extension will display its own call log information. Ext No. or Floating Ext No. (for Log-in/Log-out) Specifies the floating extension number of an incoming call distribution group to log-in to or log- out from. Ext No. or Floating Ext No. (for Hurry-up) Specifies the floating extension number of an incoming call distribution group for which Manual Queue Redirection is performed for the longest waiting call. Ext No. or Floating Ext No. (for Two-way Record) Specifies the floating extension number of the VM (DPT) group containing the extension’s mailbox. DefaultNot stored. Va lu e Ra n g eMax. 4 digits (consisting of 0–9) Feature Guide References Feature References 1.18.2 Flexible Buttons Programming References 4.4.5 Wired Extension—Flexible Key [4-1-4] Flexible Key Data Copy DefaultNot stored. Va lu e Ra n g eMax. 4 digits (consisting of 0–9) Feature Guide References Feature References 1.18.2 Flexible Buttons Programming References 4.4.5 Wired Extension—Flexible Key [4-1-4] Flexible Key Data Copy DefaultNot stored. Va lu e Ra n g eMax. 4 digits (consisting of 0–9) Feature Guide References Feature References 1.18.2 Flexible Buttons Programming References 4.4.5 Wired Extension—Flexible Key [4-1-4] Flexible Key Data Copy DefaultNot stored. Va lu e Ra n g eMax. 4 digits (consisting of 0–9)
4.4 Extension [4] Feature Guide 393 Ext No. or Floating Ext No. (for Two-way Transfer) Specifies the floating extension number of the VM (DPT) group containing the desired mailbox. Ext No. or Floating Ext No. (for Voice Mail Transfer) Specifies the floating extension number of the VM (DTMF/DPT) group containing the desired mailbox. Dial (for One-touch) Specifies the number to be dialed. The PBX can have a maximum of 1000 One-touch Dialing buttons for extensions and DSS Consoles. Optional parameter (or Ringing Tone Type Number) (for Time Service) Specifies the Time Table to be used for changing time modes in the Automatic Switching mode. Feature Guide References Feature References 1.18.2 Flexible Buttons Programming References 4.4.5 Wired Extension—Flexible Key [4-1-4] Flexible Key Data Copy DefaultNot stored. Va lu e Ra n g eMax. 4 digits (consisting of 0–9) Feature Guide References Feature References 1.18.2 Flexible Buttons Programming References 4.4.5 Wired Extension—Flexible Key [4-1-4] Flexible Key Data Copy DefaultNot stored. Va lu e Ra n g eMax. 4 digits (consisting of 0–9) Feature Guide References Feature References 1.18.2 Flexible Buttons Programming References 4.4.5 Wired Extension—Flexible Key [4-1-4] Flexible Key Data Copy DefaultNot stored. Va lu e Ra n g eMax. 32 digits (consisting of 0–9, *, #, T [Transfer], [, ] [Secret], P [Pause], and F [Flash]) Feature Guide References Feature References 1.18.2 Flexible Buttons Programming References 4.4.5 Wired Extension—Flexible Key [4-1-4] Flexible Key Data Copy
4.4 Extension [4] 394 Feature Guide Optional parameter (or Ringing Tone Type Number) (for Loop CO, Single CO, Group CO, G-DN) Specifies the ring tone type. Optional parameter (or Ringing Tone Type Number) (for Call Park) Specifies the number of the parking zone a call is to be parked by pressing the Call Park button whose Parameter Selection on this screen is Specific. Extension Number of Mailbox (for Two-way Transfer) Specifies the number of the extension whose mailbox will be used to record conversations. (For example, a secretary records a conversation into the mailbox of a boss.) This setting establishes the One-touch Two-way Transfer button. If the cell is left empty, the extension user can specify the number of an extension each time. Default1 Va lu e Ra n g e1–8 Feature Guide References Feature References 1.18.2 Flexible Buttons Programming References 4.4.5 Wired Extension—Flexible Key [4-1-4] Flexible Key Data Copy Default1 Va lu e Ra n g e1–30 Feature Guide References Feature References 1.18.2 Flexible Buttons Programming References 4.4.5 Wired Extension—Flexible Key [4-1-4] Flexible Key Data Copy DefaultNot stored. Va lu e Ra n g e0–99 Feature Guide References Feature References 1.12.2 Call Park 1.18.2 Flexible Buttons Programming References 4.4.5 Wired Extension—Flexible Key [4-1-4] Flexible Key Data Copy DefaultNot stored. Va lu e Ra n g eMax. 4 digits (consisting of 0–9) Feature Guide References Feature References 1.18.2 Flexible Buttons
4.4 Extension [4] Feature Guide 395 4.4.5 Wired Extension—Flexible Key [4-1-4] Flexible Key Data Copy The flexible CO button settings of an extension can be copied to different extensions. Select the extension that has the settings to copy to other extensions from the Extension Number / Name list, then click Copy To. Destination Extension Line Select the number and name of the extension that will receive the copied settings. Multiple extensions can be selected. To select all extensions at once, click Select All. 4.4.6 Wired Extension—PF Key [4-1-5] Each Programmable Feature (PF) button can be customized to access a certain feature with one-touch. A maximum of 12 PF buttons can be customized for each extension. Select the desired extension from the Extension Number / Name list. Ty p e Specifies whether to store a dialing number for the one-touch access. Dial Specifies the number to be dialed.Programming References 4.4.5 Wired Extension—Flexible Key [4-1-4] Flexible Key Data Copy Feature Guide References Feature References None Programming References 4.4.4 Wired Extension—Flexible Key [4-1-4] DefaultNot Stored Va lu e Ra n g eNot Stored, One-Touch Feature Guide References Feature References 1.18.2 Flexible Buttons Programming References None DefaultNot stored. Va lu e Ra n g eMax. 32 digits (consisting of 0–9, *, #, T [Transfer], [, ] [Secret], P [Pause], and F [Flash])
4.4 Extension [4] 396 Feature Guide 4.4.7 Portable Station—Extension Settings [4-2-1] For each Portable Station (PS), various extension settings can be assigned. A maximum of 28 PSs can be programmed. Main Extension Number Indicates the extension number of the PS (reference only). Extension Name Specifies the name of the PS. As for the available characters, refer to the character code table described in section 3.2.1 Installing and Starting KX-TAW848 Maintenance Console. Property Indicates the property (reference only). Extension Group Specifies the extension group to which the PS belongs. The extension group is used to compose call pickup groups and paging groups. Feature Guide References Feature References 1.18.2 Flexible Buttons Programming References None DefaultNot stored. Va lu e Ra n g eMax. 4 digits (consisting of 0–9) Feature Guide References Feature References None Programming References 4.1.7 Portable Station [1-2] DefaultNot stored. Va lu e Ra n g eMax. 20 characters Feature Guide References None DefaultPortable Station Va lu e Ra n g eNot applicable. Feature Guide References None
4.4 Extension [4] Feature Guide 397 COS Specifies the COS of the PS. Ring Pattern Table Specifies the Ring Tone Pattern Table to be used by the PS. Option 1 Extension Number Indicates the extension number of the PS (reference only). Default1 Va lu e Ra n g e1–32 Feature Guide References Feature References 2.2.2 Group Programming References None Default1 Va lu e Ra n g e1–64 Feature Guide References Feature References 2.2.1 Class of Service (COS) Programming References 4.2.14 Class of Service—COS Settings [2-7-1] Default1 Va lu e Ra n g e1–8 Feature Guide References Feature References 1.1.3.2 Ring Tone Pattern Selection Programming References 4.2.17 Ring Tone Patterns—Call from CO [2-8-1] 4.2.18 Ring Tone Patterns—Call from Doorphone [2-8-2] 4.2.19 Ring Tone Patterns—Call from Others [2-8-3] DefaultNot stored. Va lu e Ra n g eMax. 4 digits (consisting of 0–9) Feature Guide References Feature References None
4.4 Extension [4] 398 Feature Guide Extension Name Specifies the name of the PS. As for the available characters, refer to the character code table described in section 3.2.1 Installing and Starting KX-TAW848 Maintenance Console. Intercept Destination—Day, Lunch, Break, Night Specifies the Intercept Routing destination of CO line calls in each time mode for Intercept Routing–No Answer and Intercept Routing–Busy/DND feature. Programmed Mailbox No. Specifies the mailbox number of the PS’s mailbox for Voice Processing Systems (VPS) with DTMF Integration. Transfer Recall Destination Specifies the transfer recall destination when an extension user transfer a call with Call Transfer without Announcement feature and the transferred call is not answered within a certain time period.Programming References 4.1.7 Portable Station [1-2] DefaultNot stored. Va lu e Ra n g eMax. 20 characters Feature Guide References None DefaultNot stored. Va lu e Ra n g eMax. 32 digits (consisting of 0–9, *, #, [, ] [Secret], and P [Pause]) Feature Guide References Feature References 1.1.1.4 Intercept Routing Programming References None DefaultNot stored. Va lu e Ra n g eMax. 4 digits (consisting of 0–9) Feature Guide References Feature References 1.19.3 Voice Mail DTMF Integration Programming References None DefaultNot stored. Va lu e Ra n g eMax. 4 digits (consisting of 0–9)
4.4 Extension [4] Feature Guide 399 Option 2 Extension Number Indicates the extension number of the PS (reference only). Extension Name Specifies the name of the PS. As for the available characters, refer to the character code table described in section 3.2.1 Installing and Starting KX-TAW848 Maintenance Console. Extension PIN Specifies the PIN of the PS. ARS Itemized Code Specifies the itemized billing code used by the ARS feature for identifying the calls made from the PS for accounting and billing purposes. Feature Guide References Feature References 1.11.1 Call Transfer Programming References None DefaultNot stored. Va lu e Ra n g eMax. 4 digits (consisting of 0–9) Feature Guide References Feature References None Programming References 4.1.7 Portable Station [1-2] DefaultNot stored. Va lu e Ra n g eMax. 20 characters Feature Guide References None DefaultNot stored. Va lu e Ra n g eMax. 10 digits (consisting of 0–9, *, and #) Feature Guide References Feature References 1.22.1 Extension Personal Identification Number (PIN) Programming References None DefaultNot stored. Va lu e Ra n g eMax. 10 digits (consisting of 0–9, *, and #)
4.4 Extension [4] 400 Feature Guide C. Waiting for Call from Extension Selects the method of receiving call waiting notification from other extensions. C. Waiting for Call from CO Specifies whether to receive call waiting notification for a call from CO line, a doorphone call or a call via an incoming call distribution group. Pickup Dial Set Sets or cancels the Hot Line feature. The number specified in Pickup Dial Number on this screen is dialed automatically after going off-hook by the Hot Line feature. Feature Guide References Feature References 1.8.5 Verified Code Entry 1.9.1 Automatic Route Selection (ARS) Programming References 4.8.5 Carrier [8-5] DefaultBSS Va lu e Ra n g eOff: No notification BSS: Tone from the handset or built-in speaker Feature Guide References Feature References 1.1.3.3 Call Waiting Programming References None DefaultOn Va lu e Ra n g eOff, On Feature Guide References Feature References 1.1.3.3 Call Waiting Programming References None DefaultOff Va lu e Ra n g eOff, On Feature Guide References Feature References 1.6.1.6 Hot Line Programming References 4.2.5 Timers & Counters—CO / Extension [2-4-1]—Hot Line (Pickup Dial) Start Timer