Panasonic Kx-Ta624 Advanced Hybrid System User Manual

							Station Programming (Personal Programming)2-13
2.2 Station Programming (Personal Programming)
PT
Press the desired Flexible CO 
button you wish to assign as 
the Log-In/Log-Out button.Dial 8.
8
Press STORE.
AUTO DIAL
STORECO
• The STORE indicator lights.
• The display shows the initial programming mode.

Group Log In/Out
Log-In/Log-Out Button (Assignment)
Allows you to assign a Flexible CO button as the Log-In/Log-Out button.
— Be sure that you are in the Station Programming mode. Set the MEMORY switch to
“PROGRAM”.
— To exit the Station Programming mode, set the MEMORY switch to “SET”.
Feature Reference
Log-In/Log-Out 
						

							2-14Station Programming (Personal Programming)
2.2 Station Programming (Personal Programming)
One-Touch Dialing Button (Assignment)
Allows you to assign a Flexible button (CO, DSS, MESSAGE, PF) as a One-Touch
Dialing button.
— Be sure that you are in the Station Programming mode. Set the MEMORY switch to
“PROGRAM”.
PT
Press the desired Flexible button you wish to 
assign as a One-Touch Dialing button and dial 2, 
or press the desired PF button.Press STORE.
AUTO DIAL
STORE
Enter the desired number 
(extension number, 
phone number, etc.).
desired number
2No.
CO
MESSAGE
PF
) (+
• The STORE indicator lights.
• The display shows the initial
programming mode.

Not Stored
• Up to 24 digits can be stored.
• To erase an incorrect entry, press the TRANSFER (CLEAR) button.
(The TRANSFER button becomes the CLEAR button during programming.)
— To exit the Station Programming mode, set the MEMORY switch to “SET”
Conditions
• The number can be an extension number, telephone number or feature number. Up to
twenty-four digits can be stored in a One-Touch Dialing button.
• To store the telephone number of an external party, a line access code (9 or 81 through
86) must be stored as the first digit.
• You can store a number consisting of twenty-five digits or more by dividing and
assigning it into two One-Touch Dialing buttons. In this case, the line access code
should be stored in the first button.
• To store an account code, press  and then enter the desired code. The account
codes must be stored after the line access code.
• You can use 0 through 9, , #, PAUSE and INTERCOM for storing.
#: change the dialing mode (Pulse to Tone)
PAUSE: pause
INTERCOM: secret 
						

							Station Programming (Personal Programming)2-15
2.2 Station Programming (Personal Programming)
PT
Press the desired Flexible 
CO button you wish to assign 
as the O-CO button.Press STORE.
AUTO DIAL
STORECO
Dial    .
• The STORE indicator lights.
• The display shows the initial programming
mode.
Other CO Key
— To exit the Station Programming mode, set the MEMORY switch to “SET”.
Other-CO (O-CO) Button (Assignment)
Allows you to assign a Flexible CO button as the Other-CO button.
— Be sure that you are in the Station Programming mode. Set the MEMORY switch to
“PROGRAM”.
Return to Message Waiting (MESSAGE) Button (Assignment)
Allows you to restore the message waiting feature to the Message Waiting (MESSAGE)
button.
— Be sure that you are in the Station Programming mode. Set the MEMORY switch to
“PROGRAM”.
PT
Press the MESSAGE button 
you wish to restore.Dial 3.
3
Press STORE.
AUTO DIAL
STOREMESSAGE
• The STORE indicator lights.
• The display shows the initial programming
mode.
Message Waiting
— To exit the Station Programming mode, set the MEMORY switch to “SET”.
Feature Reference
Message Waiting 
						

							2-16Station Programming (Personal Programming)
2.2 Station Programming (Personal Programming)
SAVE Button (Assignment)
Allows you to assign a Flexible CO button as the SAVE button.
— Be sure that you are in the Station Programming mode. Set the MEMORY switch to
“PROGRAM”.
PT
Press the desired Flexible CO 
button you wish to assign as 
the SAVE button.Dial 5.
5
Press STORE.
AUTO DIAL
STORECO
• The STORE indicator lights.
• The display shows the initial programming mode.

Save Button
— To exit the Station Programming mode, set the MEMORY switch to “SET”.
Feature Reference
Redial, Saved Number 
						

							Station Programming (Personal Programming)2-17
2.2 Station Programming (Personal Programming)
Single-CO (S-CO) Button (Assignment)
Allows you to assign a Flexible CO button as a Single-CO button.
— Be sure that you are in the Station Programming mode. Set the MEMORY switch to
“PROGRAM”.
— To exit the Station Programming mode, set the MEMORY switch to “SET”.
Condition
• You can assign the same outside (CO) line to an S-CO and G-CO button.
PT
Press the desired Flexible 
CO button you wish to assign 
as an S-CO button.Dial 0.
0
Press STORE.
AUTO DIAL
STORE
Enter the outside (CO) line 
number (1 through 6).
outside line (CO) no.CO
• The STORE indicator lights.
• The display shows the initial
programming mode.
CO—

outside (CO) line number
• To erase an incorrect entry, press the TRANSFER (CLEAR) button.
(The TRANSFER button becomes the CLEAR button during programming.)
CO—x 
						

							2-18Station Programming (Personal Programming)
2.2 Station Programming (Personal Programming)
Voice Mail (VM) Transfer Button (Assignment)†
Allows you to assign a Flexible CO button as the VM Transfer button. 
— Be sure that you are in the Station Programming mode. Set the MEMORY switch to
“PROGRAM”.
— To exit the Station Programming mode, set the MEMORY switch to “SET”.
Condition
• You cannot enter a non-existent extension number.
• A voice mail extension number must be assigned by System Programming.
Feature Reference
Voice Mail Transfer
† Available when the KX-TA624 is connected to a Proprietary Telephone capable Panasonic Voice Processing System (one
that supports APT Integration; KX-TVS50).
PT
Press the desired Flexible button 
you wish to assign as the VM 
Transfer button.Dial 94.
94
Press STORE.
AUTO DIAL
STORE
Enter the Voice Mail 
extension number.
Voice Mail extension no.
• The STORE indicator lights.
• The display shows the initial
programming mode.
VTR

Voice Mail extension number
• To erase an incorrect entry, press the TRANSFER (CLEAR) button.
(The TRANSFER button becomes the CLEAR button during programming.)
VTR-xxx 
						

							Station Programming (Personal Programming)2-19
2.2 Station Programming (Personal Programming)
Intercom Alert Assignment
Allows you to select the alert mode (tone/voice) when receiving an intercom (extension)
call.
— Be sure that you are in the Station Programming mode. Set the MEMORY switch to
“PROGRAM”.
PT
Dial 4.
4
Press STORE.
AUTO DIAL
STORE
12or
Dial 1 or 2.
1 : to select the Ring-Calling (Tone Call) mode
2 : to select the Voice-Calling mode
• The STORE indicator lights.
• The display shows the initial programming mode.
— To exit the Station Programming mode, set the MEMORY switch to “SET”.
Condition
• The default is “Ring-Calling (Tone Call)”.
• The display shows the current status.

• When Ring-Calling (Tone Call) mode is selected;
• When Voice-Calling mode is selected;
Voice Call
Tone Call 
						

							2-20Station Programming (Personal Programming)
2.2 Station Programming (Personal Programming)
Live Call Screening Mode Set†
Assign whether the recording message is monitores through the built-in speaker
(Hands-free mode) or an alert tone is sent (Private mode) while incoming callers are
leaving a message.
— Be sure that you are in the Station Programming mode. Set the MEMORY switch to
“PROGRAM”.
PT
Dial #1.Press STORE.
AUTO DIAL
STORE
12or
Dial 1 or 2.
1 : to select Hands-free mode
2 : to select Private mode
#1
• The STORE indicator lights.
• The display shows the initial programming mode.
— To exit the Station Programming mode, set the MEMORY switch to “SET”.
Condition
• The default is the “Hands-free” mode.
Feature Reference
Live Call Screening (LCS)
† Available when the KX-TA624 is connected to a Proprietary Telephone capable Panasonic Voice Processing System (one
that supports APT Integration; KX-TVS50).
• The display shows the current status.

• When the Hands-free mode is selected;
• When the Private mode is selected;
Private
Hands-free 
						

							Station Programming (Personal Programming)2-21
2.2 Station Programming (Personal Programming)
Outside (CO) Line Ringing Selection
You can select whether the extension will ring or not when an outside call is received at
your extension.
— Be sure that you are in the Station Programming mode. Set the MEMORY switch to
“PROGRAM”.
PT
Press STORE.
AUTO DIAL
STORE
Dial 3.
3
Enter the outside (CO) line numbers 
you want to ring (1 through 6).
outside (CO) line no.

RNG:1,2,3,4,5,6
— To exit the Station Programming mode, set the MEMORY switch to “SET”.
Conditions
• The “Flexible Ringing Assignment” should be set to “Enable”. (Refer to System
Programming.)
• When an outside call is received at extension but doesn’t ring, the CO indicator will
flash. If you want to answer the outside call, press the flashing CO button.
Programming References
• System Programming — Installation Manual
[408]–[410] Flexible Ringing Assignment — Day/Night/Lunch 
						

							2-22Station Programming (Personal Programming)
2.2 Station Programming (Personal Programming)
Preferred Line Assignment — Incoming
Allows you to select the method used to answer incoming outside calls from the
following three line preferences.
1.) No Line Preference
2.) Ringing Line Preference (— default)
3.) Prime Line Preference
Follow the corresponding programming procedure according to your selection.
No Line Preference — Incoming (Assignment)
No line is selected when you go off-hook. You must select a line to answer an incoming
call by pressing a CO button.
— Be sure that you are in the Station Programming mode. Set the MEMORY switch to
“PROGRAM”.
— To exit the Station Programming mode, set the MEMORY switch to “SET”.
PT
Dial 1.
1
Press STORE.
AUTO DIAL
STORE
Dial 2.
2
• The STORE indicator lights.
• The display shows the initial
programming mode.• The display shows the current
status.

Pref. In :No