Panasonic Kx-Ta624 Advanced Hybrid System User Manual
Have a look at the manual Panasonic Kx-Ta624 Advanced Hybrid System User Manual online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 10737 Panasonic manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.
Appendix5-11 5 Appendix Tone List 1 s Confirmation Tone 1 Confirmation Tone 2 Confirmation Tone 3 Dial Tone 1 Dial Tone 2 Dial Tone 3 Busy Tone Reorder Tone Ringback Tone < TONE > Do Not Disturb (DND) Tone Outside-to-Outside (CO-to-CO) Line Call Limit Warning Tone Call Waiting Tone 1 Call Waiting Tone 2 (Single) 5 s Call Waiting Tone 2 (Double) Call Waiting Tone 2 (Triple) Hold Alarm 15 s 15 s
5-12Appendix 5 Appendix 1 s Incoming Calls (Single) / Hold Recall (Outside calls) Callback Ringing (Camp-on Recall) / Doorphone Ringing (S-Double) < RING TONE > Incoming Calls (Double) / Hold Recall (Intercom calls) Incoming Calls (Triple) / Timed Reminder
Appendix5-13 5 Appendix ProblemProbable CausePossible Solution Nothing is heard in the hands-free mode. The unit does not ring. The display flashes the following message. Set Time & Date The “Headset” mode is selected. • An outside (CO) line number is not programmed. • The Ringer Volume is set to “OFF”. The system internal clock is not working properly.When the headset is not used, set the mode to “Handset”. Refer to “Handset/Headset Selection” in Station Programming (Section 2), or “Initial Settings” (Section 1.1). • To program outside (CO) line numbers, refer to the Installation Manual. • Increase the Ringer Volume. Refer to “Initial Settings” (Section 1.1). Consult with an authorized Panasonic Factory Servicenter. If a power failure occurs... Your system enables a conversation between a specific outside (CO) line and extension (Power Failure Transfer) and supports system data backup. Power Failure Transfer A specific extension can be automatically connected to a specific outside (CO) line. This provides outside (CO) line calls between the following extension and outside (CO) line. Outside (CO) line 1 is connected to extension jack number 01. Outside (CO) line 4 is connected to extension jack number 09. • All other conversations will be disconnected during a power failure. • Proprietary telephones (PT) cannot be used during a power failure. A single line telephone will work in the event of a power failure. Connect the single line telephone to the above jack. • When power is restored after a power failure, your system automatically restarts, maintaining as much of the previous system data as possible. Troubleshooting