Panasonic Kx-Ta624 Advanced Hybrid System User Manual

							Station Programming (Personal Programming)2-3
2.1 Station Programming Instructions
To confirm the assigned data
—Be sure that you are in the Station Programming mode. Set the MEMORY switch to
“PROGRAM”.
PT
Press HOLD. Enter the program access number.
program access numberHOLD
— To exit the Station Programming mode, set the MEMORY switch to “SET”.
— If you wish to change the data, follow the programming procedure explained in this
section.
* A program access numberis required to program/confirm the data by Station Programming.
• Enter the program access number*as follows.
- 1: Preferred Line Assignment — Outgoing
- 2: Preferred Line Assignment — Incoming
- 3: Outside (CO) Line Ringing Selection
- 4: Intercom Alert Assignment
- 5: Call Waiting Tone Type Assignment
- 6: Self-Extension Number Confirmation (KX-T7030 and KX-T7130 only)
- 7: Extension Password Set (Manager only)
- 0: Date and Time Setting (Operator/Manager only)
• The display shows the programmed data.

When you press “5”, the display shows:
— The Call Waiting tone is currently programmed to Tone 1.
C.W.Tone-1
• The display shows the initial programming mode. 
						

							2-4Station Programming (Personal Programming)
2.1 Station Programming Instructions
To confirm the assigned data on the Flexible button
— Be sure that you are in the Station Programming mode. Set the MEMORY switch to
“PROGRAM”.
— To exit the Station Programming mode, set the MEMORY switch to “SET”.
— The following outline contains the buttons and program access numbers used for Station
Programming. Detailed operating instructions are explained in this section.— To exit the Station Programming mode, set the MEMORY switch to “SET”.
— If you wish to change the data, follow the programming procedure explained in this
section.
To clear the data on the Flexible button
— Be sure that you are in the Station Programming mode. Set the MEMORY switch to
“PROGRAM”.
PT
Press HOLD. Press the desired Flexible button.
HOLD
• The display shows the initial programming mode.• The display shows the current status.
PT
Press the desired 
Flexible button that 
you wish to clear.Dial 2.
2
Press STORE.
AUTO DIAL
STORE
• The STORE indicator lights.
• The display shows the initial programming mode. 
						

							(Preferred Line Assignment — Outgoing)
(Preferred Line Assignment — Incoming)
(Outside (CO) Line Ringing Selection)
(Intercom Alert Assignment)
(Call Waiting Tone Type Assignment)
(Self-Extension Number Confirmation)
(Extension Password Set)*
2
(Electronic Station Lockout — CANCEL ALL)*2
(Outgoing Message (OGM) Recording/Play back)*2
(Date and Time Setting)*2
(Live Call Screening Mode Set)†
(Live Call Screening Password Control)†*2
(Station Programming Data Default Set)
(Exit) Direct Station Selection (DSS) Button
One-Touch Dialing Button
Conference (CONF) Button
FWD/DND Button
SAVE Button
Caller ID Indication Button
Caller ID Selection Button
Log-In/Log-Out Button
Live Call Screening (LCS) Button
†
Live Call Screening (LCS) Cancel Button†
Voice Mail (VM) Transfer Button†
Single-CO (S-CO) Button
Other-CO (O-CO) Button
Group-CO (G-CO) Button
One-Touch Dialing Button
Day Button*
1
Night Button*1
Lunch Button*1
Station Lock Button*1
Return to the MESSAGE Button
Station Programming (Personal Programming)2-5
2.1 Station Programming Instructions
Station Programming Outline
(Station Programming)
CO
MESSAGE
DSS
MESSAGE3
PF
1
2
3
4
5
6
7
8
92
93
94
0
#
4
5
6
7
1
2
3
4
5
6
7
8
9
0
#
#
#
SET      PROGRAM
MEMORY
2
1
DSS
SET      PROGRAM
MEMORY
† Available when the
KX-TA624 is connected to a
Proprietary Telephone
capable Panasonic Voice
Processing System (one that
supports APT  Integration;
KX-TVS50).
*
1See the “DSS Console
Features” (Section 4.2).
*
2See the “Operator/Manager
Service Features”
(Section 3.3). 
						

							2-6 Station P rog ramming ( Personal P rog ramming)
2.2   Station Programming ( Personal Programming)
PT
512or
• The S TORE indicator lights.
• The display sh ows the current tone type. 
						

							Station Programming (Personal Programming)2-7
2.2 Station Programming (Personal Programming)
Flexible Button Assignment
Each Flexible button on your telephone and the console can be assigned as various
feature buttons such as a DSS Button, FWD/DND Button, etc. The assignable features
are limited by the button type. Please refer to “Flexible Buttons” in Section 1.1.
Caller ID Indication Button (Assignment)
Allows you to assign a Flexible CO button as the Caller ID Indication button.
— Be sure that you are in the Station Programming mode. Set the MEMORY switch to
“PROGRAM”.
PT
Press the desired Flexible CO button 
you wish to assign as the Caller ID 
Indication button.Dial 6.
6
Press STORE.
AUTO DIAL
STORECO
• The STORE indicator lights.
• The display shows the initial programming mode.
— To exit the Station Programming mode, set the MEMORY switch to “SET”.
Feature References
Call Information/Log, Incoming
Call Log, Incoming

CID Indication 
						

							2-8Station Programming (Personal Programming)
2.2 Station Programming (Personal Programming)
— To exit the Station Programming mode, set the MEMORY switch to “SET”.
Feature References
Conference
Conference, Unattended
Caller ID Selection Button (Assignment)
Allows you to assign a Flexible CO button as the Caller ID Selection button.
— Be sure that you are in the Station Programming mode. Set the MEMORY switch to
“PROGRAM”.
— To exit the Station Programming mode, set the MEMORY switch to “SET”.
Feature References
Call Information/Log, Incoming
Call Log, Incoming
Conference (CONF) Button (Assignment)
Allows you to assign a Flexible CO button as the Conference (CONF) button.
— Be sure that you are in the Station Programming mode. Set the MEMORY switch to
“PROGRAM”.
PT
Press the desired Flexible CO button 
you wish to assign as the Caller ID 
Selection button.Dial 7.
7
Press STORE.
AUTO DIAL
STORECO
• The STORE indicator lights.
• The display shows the initial programming
mode.
CID Selection
PT
Press the desired Flexible CO 
button you wish to assign as 
the Conference button.Dial 3.
3
Press STORE.
AUTO DIAL
STORECO

Conference
• The STORE indicator lights.
• The display shows the initial programming
mode. 
						

							Station Programming (Personal Programming)2-9
2.2 Station Programming (Personal Programming)
Direct Station Selection (DSS) Button (Assignment)
Allows you to assign a Flexible button (CO, DSS, MESSAGE) as a DSS button.
— Be sure that you are in the Station Programming mode. Set the MEMORY switch to
“PROGRAM”.
— To exit the Station Programming mode, set the MEMORY switch to “SET”.
Condition
• DSS buttons are provided on the DSS Console with a default setting. You can change
the setting from a paired telephone.
Feature Reference
Intercom Calling
PT
Press the desired Flexible 
button you wish to assign 
as a DSS button.Dial 1.
1
Press STORE.
AUTO DIAL
STORE
Enter the extension number 
(100 through 199).
extension no.
• The STORE indicator lights.
• The display shows the initial
programming mode.
EXT–

extension number
• To erase an incorrect entry, press the TRANSFER (CLEAR)
button.
(The TRANSFER button becomes the CLEAR button during
programming.)
EXT–xxx 
						

							2-10Station Programming (Personal Programming)
2.2 Station Programming (Personal Programming)
FWD/DND Button (Assignment)
Allows you to assign a Flexible CO button as the FWD/DND button.
— Be sure that you are in the Station Programming mode. Set the MEMORY switch to
“PROGRAM”.
PT
Press the desired Flexible CO 
button you wish to assign as 
the FWD/DND button.Dial 4.
4
Press STORE.
AUTO DIAL
STORECO
• The STORE indicator lights.
• The display shows the initial programming
mode.
FWD/DND
— To exit the Station Programming mode, set the MEMORY switch to “SET”.
Feature References
Call Forwarding
Do Not Disturb (DND)
Group-CO (G-CO) Button (Assignment)
Allows you to assign a Flexible CO button as a Group-CO button.
— Be sure that you are in the Station Programming mode. Set the MEMORY switch to
“PROGRAM”.
PT
Press the desired Flexible 
CO button you wish to 
assign as a G-CO button.Dial #.
#
Press STORE.
AUTO DIAL
STORE
Enter the outside (CO) line group 
(trunk group) number (1 through 6).
outside (CO) line group no.CO
• The STORE indicator lights.
• The display shows the initial
programming mode.

outside (CO) line group number
• To erase an incorrect entry, press the TRANSFER (CLEAR) button.
(The TRANSFER button becomes the CLEAR button during programming.)
TRK GRP-x

TRK GRP-
— To exit the Station Programming mode, set the MEMORY switch to “SET”. 
						

							Station Programming (Personal Programming)2-11
2.2 Station Programming (Personal Programming)
PT
Press the desired Flexible button 
you wish to assign as the 
Live Call Screening button.Dial 92.
92
Press STORE.
AUTO DIAL
STORE
• The STORE indicator lights.
• The display shows the initial programming mode.

LCS
Live Call Screening (LCS) Button (Assignment)†
Allows you to assign a Flexible CO button as the Live Call Screening (LCS) button.
— Be sure that you are in the Station Programming mode. Set the MEMORY switch to
“PROGRAM”.
— To exit the Station Programming mode, set the MEMORY switch to “SET”.
Feature Reference
Live Call Screening (LCS)
† Available when the KX-TA624 is connected to a Proprietary Telephone capable Panasonic Voice Processing System (one
that supports APT Integration; KX-TVS50). 
						

							2-12Station Programming (Personal Programming)
2.2 Station Programming (Personal Programming)
PT
Press the desired Flexible button 
you wish to assign as the 
Live Call Screening Cancel button.Dial 93.
93
Press STORE.
AUTO DIAL
STORE
• The STORE indicator lights.
• The display shows the initial programming mode.

LCS Cancel
Live Call Screening (LCS) Cancel Button (Assignment)†
Allows you to assign a Flexible CO button as the Live Call Screening (LCS) Cancel
button.
— Be sure that you are in the Station Programming mode. Set the MEMORY switch to
“PROGRAM”.
— To exit the Station Programming mode, set the MEMORY switch to “SET”.
Feature Reference
Live Call Screening (LCS)
† Available when the KX-TA624 is connected to a Proprietary Telephone capable Panasonic Voice Processing System (one
that supports APT Integration; KX-TVS50).