Panasonic Digital Imaging System For Copy Functions Dp 6530 Operating Instructions

							1
2
3
4
5
6
7
8
9
10
11
12
4-25
5
Key in the page number you selected for the
insertion of the tab paper, then press the upper
SET  key.
- When two sheets of paper or more are inserted, repeat this
operation. Up to 15 sheets of paper can be inserted.
6
Press the lower  SET  key.
 Select other copy modes as required.
7
Press the  START  key.
4
Press the  COPIED TAB INSERT  key.
3
Press the  EDIT  key to enter the edit menu, and
press the  TAB PAPER  key.
- If the desired function keys are not displayed, press the
Next  or  Pre  key to change the menu screen.
 Tab Paper Insertion and Copying
2
Place the original(s).  Page 2-9
1
Place tab paper in the drawer or the bypass guide.
- For placing it in the drawer  Page 4-22
- For placing it in the bypass guide 
 Page 4-23 Copied tab paper is inserted prior to the selected pages. Up to 15 sheets of tab paper can be inserted. 
						

							12
3
4
5
6
78
9
10
11
12
4-26USING THE EDITING FUNCTIONS
1
Place the original(s).  Page 2-9
2
Press the  EDIT  key to enter the edit menu, and
press the  DOCUMENT STORAGE  key.
- If the desired function keys are not displayed, press the Next  key to change the menu screen.
12. DOCUMENT STORAGE
This feature allows images of the originals to be stored on the hard disk of the machine, and copies can
be made from the hard disk later. This copying method consists of the following two modes:
MEMORIZE mode : Stores original images at the specified location of the hard disk.
PRINT mode : Prints the originals stored in the Memorize Mode in .
* Originals can be stored in up to 24 locations.
* Up to 1,000 original sheets can be stored in each location.
Total Document Storage capacity is determined by the size of the documents.
3
Press the  MEMORIZE  key.
4
Press the file name column of the location number
(ID) where you want your document stored, key in
the file name and press the  SET  key.
- Select any ID where no data has been stored.
- Entering letters 
 Page 5-29
(Max. 36 characters)
(Maximum of 13 characters can be displayed for the file name.)
 Storing Documents in the MEMORIZE Mode 
						

							1
2
3
4
5
6
7
8
9
10
11
12
4-27
5
Press the  START   key.
- The memorization process starts automatically.
- To change the file name, select the ID you want to change
in the list on the display, press the file name column,
delete the file name already entered with the  B Space key
in the letter entry screen, then enter a new file name, and
press the  SET  key.
- Entering letters 
 Page 5-29
- To confirm a memorized job, select the ID from the list on
the display and press  TEST PRINT .
- To delete a memorized job, select the ID from the list on
the display and press the  DELETE  key. Then, press the
Delete  key on the next screen.
2
Press the  EDIT  key to enter the edit menu, and
press the  DOCUMENT STORAGE  key.
- If the desired function keys are not displayed, press the   Next
key to change the menu screen.
3
Press the  PRINT   key.
4
Select the ID of the job you want to print out,
and press the  SET  key.
- The memorized functions are recalled.
 Select other copy modes as required.
5
Press the  START  key.
1
 Place paper in the drawer(s).  Page 2-4
 Making Copies in the PRINT Mode 
						

							1
2
3
4
5
6
7
8
9
10
11
12
4-28USING THE EDITING FUNCTIONS
13. OVERLAY
This function stores the images that you frequently use and makes copies by overlaying onto the copied
originals.
- 24 different images can be stored.
* The stored image cannot be printed with reduction and enlargement. However, the original can be
overlaid with reduction and enlargement by adjusting it to the size of stored image.
4
Press the row of the file name list you desire, then
press the  FILE NAME  key.
3
Press the  MEMORIZE  key.
1
Place the original you want to have memorized.
 Page 2-9
2
Press the  EDIT  key to enter the edit menu, and
press the  OVERLAY  key.
- If the desired function keys are not displayed, press the
Next  key to change the menu screen.
Storing Image
Overlay Storing Image 
						

							12
3
4
5
6
78
9
10
11
12
4-29
Confirming Stored Image (Test Print)
1
Perform steps 2 and 3.  Page 4-29
2
Press the file name you desire (the selected file
name will be shaded), then press the  TEST PRINT
key.
- The stored image starts printing out.
Deleting Image
1
Perform steps 2 to 3.  Page 4-29
2
Press the file name you desire ( the selected file
name will be shaded), then press the  DELETE
key.
7
The form will be stored as shown on the right.
(Maximum of 13 characters can be displayed for the file name.)
5
Input the file name with the screen for entering
letters and press the  SET  key.
- Entering letters.  Page 5-29
(Max. 36 characters)
6
Press the  START  key.
- The original starts scanning to memorize the image.
3
Press the  Delete  key. 
						

							1
2
3
4
5
6
7
8
9
10
11
12
4-30USING THE EDITING FUNCTIONS
13. OVERLAY (Cont.)
Overlaying Originals with Stored Image
4
Press the  OVERLAY  key.
5
Press the file name you desire (the selected file
name will be shaded), and press the  SET  key.
3
Press the  EDIT  key to enter the edit menu, and
press the  OVERLAY  key.
- If the desired function keys are not displayed, press the
Next  key to change the menu screen.
1
Place paper in the drawer(s).  Page 2-4
2
Place the original(s).  Page 2-9
 Select other copy modes as required.
6
Press the  START  key.
Confirming Overlay (Test Print)
When overlaying more than one original with the stored image, the first original is overlaid with the stored
image and printed out.
1
Perform the above step 1 to step 4.
2
Press the file name you desire (the selected file
name will be shaded), and press the  TEST PRINT
key. 
						

							1
2
3
4
5
6
7
8
9
10
11
12
4-31
14. SHARPNESS ADJUSTMENT
5
Press the  SET  key.
 Select other copy modes as required.
2
Place the original(s).  Page 2-9
3
Press the  EDIT  key to enter the edit menu, and
press the  SHARPNESS  key.
- If the desired function keys are not displayed, press the
Next  key to change the menu screen.
This function allows you to emphasize the letters and edges of images.
4
Press the   SOFT  (or  SHARP  ) key.
- Pressing the   SOFT  key suppresses the moire fringe
while pressing the  SHARP 
  key emphasizes the letters
and sharpens the fine lines.
6
Press the  START  key.
Cancelling the Sharpness Adjustment
Press the  DEFAULT  key, then the  SET  key.
1
Place paper in the drawer(s).  Page 2-4 
						

							1
2
3
4
5
6
7
8
9
10
11
12
4-32USING THE EDITING FUNCTIONS
15. DIRECTION OF DUPLEX COPY IMAGES (Rotation)
When lengthLD (Ledger) paper is copied under the mode of 1-Sided Originals to 2-Sided Copies,
2-Sided Originals to 1-Sided Copies, this function allows you to adjust the direction for ‘side-by-side’
opening.
* This function is not necessary for copying in the direction of ‘vertical’ opening.
set
non set
5
Press the  SET  key.
1
Place paper in the drawer(s).  Page 2-4
 Select other copy modes as required.
6
Press the  START  key.
2
Place the original(s).  Page 2-9
3
Select 1-Sided Originals to 2-Sided Copies (or
2-Sided Originals to 1-Sided Copies).
- Duplex copying  Page 3-8
4
Press the  EDIT  key to enter the editing menu, and
press the  IMAGE DIRECTION   key.
- If the desired function keys are not displayed, press the
Next  key to change the menu screen.
 
You can change the initial setting (default setting) of “Image Direction” on the User Selection
 (
 Page 5-19) 
						

							1
2
3
4
5
6
7
8
9
10
11
12
5-1
5. USING SPECIAL
FUNCTIONS
1. CONTINUOUS ORIGINAL FEEDING /
SINGLE ORIGINAL FEEDING .................. 5-2
2. MIXED-SIZED ORIGINALS..................................................... 5-4
3. JOB MEMORY ......................................................................... 5-5
4. BYPASS COPYING ................................................................. 5-8
- Bypass Copying on Standard Size Paper ................................................ 5-10
- Bypass Copying on Non-Standard Size Paper ......................................... 5-11
5. WEEKLY TIMER ..................................................................... 5-13
6. SETTING THE “OTHER” SIZE KEY ....................................... 5-14
7. SETTING THE DATE AND TIME ............................................ 5-15
8. SETTING THE AUTOMATIC ENERGY SAVE MODE ............ 5-16
9. SETTING THE  AUTOMATIC  OFF-MODE .............................. 5-17
10.SWITCHING LANGUAGES ................................................... 5-18
11.USER SELECTION (Initial settings) ....................................... 5-19
12.DEPARTMENT CODES ......................................................... 5-20
13.ENTERING LETTERS ........................................................... 5-29 
						

							1
2
3
4
5
6
7
8
9
10
11
12
5-2USING THE SPECIAL FUNCTIONS
 Select other copy modes as required.
5
Press the  START   key.
When the number of originals is too large to be set at one
time, you can divide the originals into two to ten sets and
set them one after another. To do so, place the first set of
originals first, and press the  CONTINUE  key while the
scanning is in progress. After they have been scanned,
place the previous set of originals.
3
Press the  PROGRAM  key to enter the program
menu, and press the  ADF  key.
1. CONTINUOUS ORIGINAL FEEDING / SINGLE ORIGINAL FEEDING
When using the reversing automatic document feeder, you can select the continuous feed mode (default
setting) where multiple (or single) originals are continuously fed in one by one, or the single-feed mode
where if you insert an original, it is automatically pulled in and starts being copied.
1
Place paper in the drawer(s).  Page 2-4
Continuous Feed Mode
2
Place the original(s) on the reversing automatic
document feeder. 
 Page 2-11
- Originals can be set maximum 100 sheets at a time.
4
Press the  ADF  key.