Panasonic Digital Imaging System For Copy Functions Dp 6530 Operating Instructions

							12
3
4
5
6
78
9
10
11
12
4-15
This feature allows numbers to be added at specified position to copies.
Page number printed at the bottom
center on the por trait copy. Page number printed at the top
right on the landscape copy.
8. PAGE NUMBERING COPYING
3
2
1
3
Press the  EDIT  key to enter the edit menu, and
press the  PAGE NUMBER  key.
- If the desired function keys are not displayed, press the
Next  or  Pre  key to change the menu screen.
4
Select the orientation ( Short edge  or  Long edge )
and position of the page number to be printed.
Then, press the  SET  key.
5
Key in the starting page number.
- If the star t page number is “1”, just press the  SET  key.
 Select other copy modes as required.
6
Press the  START  key.
1
Place paper in the drawer(s).  Page 2-4
2
Place the original(s).  Page 2-9
3
2
1
There may be situations
when the image or
character(s) overlap an
annotation (such as date
and time, etc.) 
						

							1
2
3
4
5
6
7
8
9
10
11
12
4-16USING THE EDITING FUNCTIONS
The magazine sort mode allows 1-sided originals to be copied and sorted so that they can be folded and
bound along a center line like typical magazines or booklets.
Example of copying a 12-page document
 If used in combination with the optional saddle stitch finisher (MJ-1018, MJ-1021), copies can be
automatically folded in half and stapled along their center line. LD, LT-R, A3, A4-R, B4 are available.
* Magazine Sort can be accessed from two locations. For the mode operated from the BASIC menu
when the finisher (optional) is installed, see page 6-6.
9. MAGAZINE SORT (FROM THE EDITING MENU)
1
Place paper in the drawer(s).  Page 2-4
2
Select the paper type.
For drawer feeding  Page 3-2 (step 3)
For bypass feeding 
 Page 5-9 (step 4)
3
Place the original(s).  Page 2-9
- When placing them in the reversing automatic document
feeder, set them by referring to the order of pages in the
illustrations above.
- When placing them on the glass, place the first page of the
originals first.
4
Press the  EDIT  key to enter the edit menu, and
press the  MAGAZINE SORT  key.
- If the desired function keys are not displayed, press the
Next  or  Pre  key to change the menu screen.
12321
11 29 47 6
7 6
12321 
						

							1
2
3
4
5
6
7
8
9
10
11
12
4-17
- If the optional saddle stitch finisher (MJ-1018, MJ-1021) is
installed, copies can be automatically stapled along their
center line. To have copies stapled, press the  STAPLE ON
key.
- Maximum number of sheets that can be stapled
 Page 6-7
 Select other copy modes as required.
6
Press the  START  key.
- When placing an original on the glass, perform steps 5 and
6 on page 2-3 as needed.
5
Adjust the binding margin and press the  SET  key.
- The default width of the margin is 2 mm (0.08’’).
- To adjust the width, press the  
 2mm  or  30mm   key to
select the desired number, then press the  SET  key.
*25.4mm = 1’’ 
						

							12
3
4
5
6
78
9
10
11
12
4-18USING THE EDITING FUNCTIONS
A top cover and/or back cover (special sheets, e.g. colored paper) can be added to each set of copies.
- Adding a blank cover
- Adding a copied cover
- Adding a blank cover and a blank back cover
- Adding a copied cover and blank back cover
10. COVER COPYING
1
Place the cover sheet in the drawer for cover sheet
or on the bypass guide.
- When placing it in the drawer for the cover sheet, it is necessary to set the paper type (cover sheet), size and
weight. Setting the drawer for special uses. 
 Page 2-7
- When placing it on the bypass guide, it is necessary to set the paper size and weight. 
 Page 5-10
2
Place, or confirm that if there is, paper (other than
cover paper) in the drawer(s). 
 Page 2-4
- Place the paper of the same size and the same direction as that of cover.
Example of adding a blank cover
  TOP BLANK
Example of adding a copied cover
  TOP COPIED
Example of adding a blank cover and a
blank back cover
  BOTH BLANK
Example of adding a copied top and blank
back cover
  TOP COPIED BACK BLANK
When using the cover feature, make certain all paper sources are of the same orientation and the
size. This includes specified drawer, and bypass.
3
Place the original(s).  Page 2-9
- When placing an original on the glass, place the first page of your originals first. 
						

							12
3
4
5
6
78
9
10
11
12
4-19
5
Select the desired cover sheet key:
To add a blank top cover: TOP BLANK
To add a copied top cover: TOP COPIED
To add blank top and back covers: BOTH BLANK
To add copied top and blank back covers: TOP COPIED BACK BLANK
6
Press the  BASIC  key to enter the basic menu,
and select the paper source of the same size and
direction as  the cover sheet paper.
- Setting the drawer for cover sheet  Page 2-6
 Select other copy modes as required.
7
 Press the  START  key.
When  TOP COPIED  key or  TOP COPIED BACK BLANK key
is selected, the cover sheet can be copied only on the top
face (single-side) though 1-Sided Original to 2-Sided Copy is
used.
4
Press the  EDIT  key to enter the edit menu, and
press the  COVER SHEET  key.
- If the desired function keys are not displayed, press the
Next  or  Pre  key to change the menu screen.
- Setting the bypass guide  Page 5-8 
						

							1
2
3
4
5
6
7
8
9
10
11
12
4-20USING THE EDITING FUNCTIONS
Tab paper back guide
Slide rail
11. TAB  PAPER  MODE
Tab paper copy and insertion are available.
Copy on Tab: Copying on tab paper
Blank Tab Insert: Inser ting blank tab paper prior to a selected page
Copied Tab Insert: Combination of copying on tab paper and inserting tab paper
 - To copy on tab paper, adjust the tab width.
* Place tab paper in the second drawer or the bypass guide.
* Only LT and A4 can be used in this mode.
When selecting “YES” of “Hole Punch the tab paper” on the User Selection ( Page 5-19), you can
combine it with the optional hole punch mode (
 Page 6-8).
Setting Tab Paper in the Drawer
1
Pull the second drawer out.
- Do not touch the slide rail of the drawer.
2
Insert the back guide exclusively use for the tab
paper into the slit hole of LT-TAB.
3
Align the tab paper with the original.
4
Place the tab paper face down in the drawer.
 Originals Sheets of tab paper
1st 2nd 3rd 4th1st
2nd
3rd
4th
1st
2nd
3rd
4thback side
5
Return the drawer into the machine.
Be careful not to let your fingers be caught when closing the
drawer.front
side 
						

							1
2
3
4
5
6
7
8
9
10
11
12
4-21
To copy on tab paper, adjust both the tab width and the shift width for the drawer and the bypass guide
respectively.
 Tab Width  Adjustment
Setting Tab Paper in the Bypass Guide
1
Align the tab paper with the original.
2
Place the tab paper with face up on the bypass
guide.
* The shift width means the distance
the image should be shifted when
copied on the tab paper.Shift width*
Tab width
Original
Tab paper
 The range of the tab width/the shift width
 Originals Sheets of tab paper
1st 2nd 3rd 4th1st
2nd
3rd
4th
1
Press the  EDIT  key to enter the edit menu, and
press the  TAB PAPER  key.
- If the desired function keys are not displayed, press the
Next  or  Pre  key to change the menu screen.
front side
front
side
3
Perform step 3 and 4 on page 5-9.
- Be sure to select ‘Tab Paper’ for the paper type. 
						

							1
2
3
4
5
6
7
8
9
10
11
12
4-22USING THE EDITING FUNCTIONS
Tab width
Align the tab paper with
the original scale
Original scale
Shift width
Align the original with
the original scale
Original scale
11. TAB PAPER MODE (Cont.)
2
Press the  TAB EXTENSION  key.
3
Press the  CASSETTE  key (or the  BYPASS FEED
key), then adjust the tab extension (tab width) and
the shift width then press the  SET  key.
- Adjust the tab width and the shift width by means of
the  
 0mm  key and the  30mm   key.
The initial settings are set to 13mm (0.51”) for the tab width
and the shift width. You can change the initial setting (default
setting) on the User Selection (
 Page 5-19).
The range of the tab width/the shift width
 Tab  width
12 to 17mm
(0.4” to 0.6”)
10 to 20mm
(0.4” to 0.7”)
 Shift width
0 to 30mm
(0 to 1.1”)
0 to 30mm
(0 to 1.1”)
Drawer
Bypass
Measuring the tab width / the shift width
The tab width and the shift width can be measured on the
original glass. Place tab paper for measuring the tab width
and place original for measuring the shift width on the
original glass as indicated on the right. The marks of the
original scale have a 2mm pitch.
- Measuring the tab width (Place tab paper)
*25.4mm = 1”
- Measuring the shift width (Place original) 
						

							1
2
3
4
5
6
7
8
9
10
11
12
4-23
1
Place tab paper in the drawer or the bypass guide.
- For placing it in the drawer  Page 4-22
- For placing it in the bypass guide 
 Page 4-23 Copying on tab paper at the value in the tab width set mode (
 Page 4-23).
2
Place the original(s).  Page 2-9
 Tab  Paper  Copying
3
Press the  EDIT  key to enter the edit menu, and
press the  TAB PAPER  key.
- If the desired function keys are not displayed, press the
Next  or  Pre  key to change the menu screen.
4
Press the  COPY ON TAB   key.
5
Press the  SET  key.
 Select other copy modes as required.
6
Press the  START  key. 
						

							1
2
3
4
5
6
7
8
9
10
11
12
4-24USING THE EDITING FUNCTIONS
5
Key in the page number you selected for the
insertion of the tab paper , then press the upper
SET  key.
- When two sheets of paper or more are inserted, repeat this
operation. Up to 15 sheets of paper can be inserted.
6
Press the lower  SET  key.
 Select other copy modes as required.
7
Press the  START  key.
11. TAB PAPER MODE (Cont.)
4
Press the  BLANK TAB INSERT  key.
3
Press the  EDIT  key to enter the edit menu, and
press the  TAB PAPER  key.
- If the desired function keys are not displayed, press the
Next  or  Pre  key to change the menu screen.
Tab paper (blank) is inserted into selected pages. Up to 15 sheets of tab paper can be inserted.
 Tab  Paper  Insertion
2
Place the original(s).  Page 2-9
1
Place tab paper in the drawer or the bypass guide.
- For placing it in the drawer  Page 4-22
- For placing it in the bypass guide 
 Page 4-23