Panasonic Digital Imaging System For Copy Functions Dp 6530 Operating Instructions

							1
2
3
4
5
6
7
8
9
10
11
12
9-1
9. SPECIFICATIONS
 & OPTIONS
1. DP-6530/8130 SPECIFICATIONS ........................................... 9-2
2. SPECIFICATIONS OF OPTIONS ............................................ 9-4
3. PACKING LIST ......................................................................... 9-6
4. INDEX ...................................................................................... 9-7
@4QFDJGJDBUJPOTQ04/09/02, 16:54 Page 1EPCF
1BHF.BLFS
+8JO 
						

							12
3
4
5
6
78
9
10
11
12
9-2SPECIFICATIONS & OPTIONS
1. DP-6530/8130 SPECIFICATIONS
Model Name
Type
Original Glass
Copying System
Developing System
Fixing method
Photoconductor Type
Original Scanning System
Resolution
Acceptable Originals
Acceptable Original Size
*1
Acceptable Original
Paper Weight *1
Acceptable Copy Paper Size
Acceptable Paper Weight
Warm-up Time
First Copy Time (LT)
Multiple Copying
Reproduction Ratio
Paper Supply
Toner Density Adjustment
Exposure Control
Light Source
Power Requirements
Power Consumption
Dimensions
Weight
Space Occupied
Storage Capacity
DP-6530/8130
Console type
Fixed (original referenced to top left, referenced to center when
using reversing automatic document feeder)
Indirect electrophotographic method
2-component magnetic brush developing
Heat roller (Induction heating)
OPC
Linear CCD sensor
600 x 2400 dpi with smoothing
Sheets, books and three-dimensional objects
LD (Ledger), LG (Legal), LT (Letter), LT-R (Letter-R),
ST-R (Invoice-R)
1-Sided Original: 13 - 34 lb Bond
2-Sided Original: 13 - 28 lb Bond
Drawer: LD (Ledger), LG (Legal), LT (Letter), LT-R (Letter-R), ST-R (Invoice-R)
(Tandem LCF: LT only)
Bypass feeding: Paper size within 3.94” - 11.69” (Length),
5.83” -  17.01”(Width)
17 - 110 lb Index (Drawer and Bypass feeding)
Approx. 160 seconds
Approx. 3.2 seconds
Up to 9999 copies (digital key entry)
Actual size: 100 + 0.5%
Zoom: 25 - 400% (increments)
For the reversing document feeder: 25 - 200% ( in 1% increments)
Drawer: 500 sheets
Tandem LCF: 2500 sheets (20 lb Bond)
Sheets bypass: 100 sheets (20 lb Bond)
Magnetic auto-toner system
Automatic plus manual selection from 11 exposure step
Xenon lamp
120 V, 60 Hz, 16 A
2.0 kW
27.48”(W) x 30.59”(D) x 47.76”(H)
Approx. 463 lb
55.16”(W) x 30.59”(D)
Max. 1000 images (1 job)
*1 When using the reversing automatic document feeder. 
						

							1
2
3
4
5
6
7
8
9
10
11
12
9-3
Feeder
Drawer/Tandem LCF
Bypass
Drawer
Bypass
Drawer
Bypass
Drawer
Bypass *2
Drawer/Tandem LCF
Bypass
Drawer
Bypass
Drawer
Bypass
Drawer
Bypass *2
Drawer/Tandem LCF
Bypass
Drawer
Bypass
Drawer
Bypass
Drawer
Bypass *2 Paper Size
LT (Letter),
ST-R (Invoice-R)
LT- R
(Letter-R)
LG (Legal)
LD (Ledger)
LT (Letter),
ST-R (Invoice-R)
LT- R
(Letter-R)
LG (Legal)
LD (Ledger)
LT (Letter),
ST-R (Invoice-R)
LT- R
(Letter-R)
LG (Legal)
LD (Ledger) Continuous Copying Speed
sheets/min.
* The values above are measured when originals are set on the original glass, 1-Sided, 100% and
non-sort multicopies are made.
* ‘Face up’ and ‘Face down’ in the table mean the paper exit faces.
* The bypass copying speed is as listed above when specifying the paper size, however when the paper
size is not specified, the copy speed of all sizes is on ‘*2’.
*  Only LT-sized paper can be set in tandem LCF.
*  This specification varies depending on copying condition and environment.
Paper Type
Plain Paper
(17-20 lb Bond)
Thick 1
(- 90 lb Index)
Thick 2
(- 110 lb Index)
Face down
81
50
56
44
45
39
37
34
81
50
56
44
45
39
37
34
65
50
48
44
40
39
34
34
Face up
81
50
61
44
52
39
43
34
81
50
61
44
52
39
43
34
65
50
50
44
43
39
37
34
Face down
65
48
48
42
40
37
34
33
65
48
48
42
40
37
34
33
65
48
48
42
40
37
34
33
Face up
65
48
50
42
43
37
37
33
65
48
50
42
43
37
37
33
65
48
50
42
43
37
37
33
DP-6530DP-8130
@4QFDJGJDBUJPOTQ04/09/02, 16:54 Page 3EPCF
1BHF.BLFS
+8JO 
						

							1
2
3
4
5
6
7
8
9
10
11
12
9-4SPECIFICATIONS & OPTIONS
2
x
9.8
(2000)
5.5
(1000)
Mixed paper not loaded
1, 2
x
Whichever of 4.3”, 750 sheets
or 100 copies is reached first
Whichever of 2.9”, 500 sheets
or 50 copies is reached first
1
2.9 *
(500)
9.8
(2000)
5.5
(1000)
2
2.9 *
(500)
9.8
(2000)
5.5
(1000)
1
x
9.8
(2000)
5.5
(1000)
DA-FS810 DA-FS815
Floor type
LD (Ledger), LG (Legal), LT (Letter), LT-R (Letter-R)
16 lb Bond - 140 lb Index
LT (Letter)
LD (Ledger), LG (Legal),
LT-R (Letter-R)
Rear, Front, Front diagonal, Double
No Yes
LD (Ledger), LT-R (Letter-R)
20 lb Bond 24 lb Bond 28 lb Bond
15 sheets 10 sheets 10 sheets
Optional
Supplied from the DP-6530/8130
24.2”(29.1” *) (W) x 24.8”(D) x 40.28”(H)
Approx. 92.59 lb Approx. 136.7 lb
170 W max. 170 W max.
2. SPECIFICATIONS OF OPTIONS
Finishers
Mode
Tray No.
ST-R (Invoice-R)
LT (Letter)
LD (Ledger), LG (Legal),
LT-R (Letter-R)
Tray Loading Capacity
Non-Sort
Sort/Group
Mixed paper loaded
1, 2
x
Whichever of 2.9”, 500 sheets
or 50 copies  is reached first
Whichever of 2.9”, 500 sheets
or 50 copies is reached first
Units of inch + 0.276 inch
Values in parentheses = the number of 20 lb Bond sheets
* The dimension value in parentheses are measured when the sub-tray is pulled out.
Model Name
Type
Acceptable Paper Size
Acceptable Paper Weight
Number of Copies
Stapled at a Time
Stapling Position
Saddle Stitch Unit
Stitch Capacity
Hole Punch Unit
Power Source
Dimensions
Weight (DA-FS815)
Power Consumption20 lb Bond
50 sheets
(100) sheets
30 sheets
(50) sheets
Staples loaded
@4QFDJGJDBUJPOTQ04/09/02, 16:54 Page 4EPCF
1BHF.BLFS
+8JO 
						

							1
2
3
4
5
6
7
8
9
10
11
12
9-5
Model Name
DA-SP81
Hole Punch Unit
Available paper sizes
2 holes: LG (Legal), LT-R (Letter-R)
3 holes: LD (Ledger), LT (Letter)
Paper Weight: 16 lb Bond - 140 lb Index
Number of punching holes and hole diameter
2 / 3 holes switchable
(0.315” dia.)
* The paper mentioned above is Panasonic-recommended paper. Specifications and appearance are
subject to change without notice in the interest of product improvement. External LCF (Large Capacity Feeder)
Model Name
Type
Acceptable paper size
Acceptable paper weight
Maximum Capacity
Power Source
Dimensions
Weight
DA-MA801
Floor Type
LT (Letter)
17 lb Bond - 110 lb Index
4000 sheets (20 lb Bond)
Supplied from the DP-6530/8130
12.8”(W) x 23.6”(D) x 24.3”(H)
Approx. 88.2 lb
@4QFDJGJDBUJPOTQ04/09/02, 16:54 Page 5EPCF
1BHF.BLFS
+8JO 
						

							1
2
3
4
5
6
7
8
9
10
11
12
9-6SPECIFICATIONS & OPTIONS
3. PACKING LIST
Packing ListSet-up Instructions
Set-up Report
Photoconductive Drum
Photoconductive Drum Cover
Operating Instructions Pocket
Tray Spacer of Reversing Automatic Document Feeder
Back Guide for Tab Paper
@4QFDJGJDBUJPOTQ04/09/02, 16:54 Page 6EPCF
1BHF.BLFS
+8JO 
						

							12
3
4
5
6
78
9
10
11
12
9-7
4. INDEX
Numbers
2 IN 1 ............................................................. 4-12
2 IN 1 DUPLEX .............................................. 4-12
2 IN 1/4 IN 1 ................................................... 4-12
4 IN 1 ............................................................. 4-12
4 IN 1 DUPLEX .............................................. 4-12
A
Acceptable Copy Paper Types and Sizes ......... 2-4
Acceptable Original Types and Size ................. 2-9
Add Paper Symbol ........................................... 7-3
Adding Paper to the Drawers ........................... 7-3
Adding Paper to the External LCF ................... 7-5
Adding Paper to the Tandem LCF .................... 7-4
Adding Staples ............................................... 7-21
Additional Explanation ..................................... 7-8
After Copying is Finished ........................ 1-9, 1-10
Auto Job Star t (Job Preset) ..................... 1-8, 2-13
Automatic Copy Density Mode ....................... 3-11
Automatic Function Clear ................................. 1-5
Automatic Magnification Selection (AMS) ........ 3-4
Automatic Paper Selection (APS) .................... 3-2
Available Conditions for Saddle Stitch ............. 6-7
B
Book-type Originals ........................................ 2-10
Book-type Originals to 2-Sided Copies ............ 3-8
Bypass Copying ............................................... 5-8
Bypass Copying on Non-Standard Size Paper 5-11
Bypass Copying on Standard Size Paper ...... 5-10
Bypass guide ................................................... 1-2
C
Call Service Symbol ....................................... 7-30
Canceling the Sharpness Adjustment ............ 4-33
Changing a Specific Department Code .......... 5-24
Changing the Paper Size of the Drawer ........... 2-6
Changing the Printing Order .......................... 2-17
CLEAR key ....................................................... 1-4
Clear Paper Symbol ......................................... 7-9
Clearing a Specific Depar tment Code ........... 5-26
Clearing All Counters ..................................... 5-28
Clearing the Automatic Energy Saving Mode 5-16
Clearing the Drawer for Special Uses .............. 2-8
Clearing the Functions Selected ...................... 1-7
Clearing the Off-Mode/Sleep Mode ............... 5-17
Clip tray ............................................................ 1-5 Confirming and Canceling Auto Job Start ...... 2-13
Confirming Stored Copy Modes ....................... 5-7
Confirming Stored Image (Test Print) ............. 4-31
Continuous Copying Speed (Specification) ...... 9-3
Continuous Feed Mode .................................... 5-2
Continuous Original Feeding/Single Original
Feeding ............................................................ 5-2
Control Panel ................................................... 1-4
Controlling the Use of the Machine with
Depar tment Codes ........................................... 1-9
Controlling the Use of the Machine with the
Optional Key Copy Counters .......................... 1-10
Machine does not start ..................................... 8-3
Copies are stained ........................................... 8-4
Copy Density Adjustment ............................... 3-11
Copy density is too high ................................... 8-4
Copy density is too low .................................... 8-3
Copy images are blurred .................................. 8-4
COPY key ........................................................ 1-4
Copying Procedure .......................................... 2-2
Copying when the power is off ....................... 5-13
Copying with Annotation ................................ 4-14
Correcting Entered Letters ............................. 5-30
Cover Copying ................................................ 4-18
Cover Sheet Insertion of Top Blank/Both Blank
6-11
D
Daily Inspection ................................................ 8-2
Deleting a Specific Depar tment Code ............ 5-25
Deleting Image ............................................... 4-31
Deleting or Changing Order of Pending Jobs 2-16
Deleting the Job ............................................. 2-16
Depar tment Codes ......................................... 5-20
Description of the Digital Imaging System and the
Optional Equipment ......................................... 1-2
Description of the Flashing Graphic Symbols .. 7-2
Digital keys ....................................................... 1-4
Direction of Duplex Copy Images ................... 4-34
Disabling a Department Code ........................ 5-27
Disclaimer Notice ................................................. 7
Display does not change when keys or icons are
pressed ............................................................ 8-3
Dispose of Used Toner ..................................... 7-8
Disposing of Accumulated Punched Paper Bits ...7-29
Document Storage ......................................... 4-28
Drawers ............................................................ 1-2
Dual Page ........................................................ 4-5 
						

							12
3
4
5
6
78
9
10
11
12
9-8SPECIFICATIONS & OPTIONS
4. INDEX (Cont.)
Duplex Copying ................................................ 3-7
E
Edge Erase ...................................................... 4-4
Energey Saver ...................................................... 1
ENERGY SAVER key ....................................... 1-5
Entering Letters .............................................. 5-29
DP-6530/8130 Specifications ........................... 9-2
Exit Cover ......................................................... 1-2
Exiting Copy Papers ......................................... 2-3
Exiting Originals ............................................. 2-11
External LCF .................................................... 9-5
F
Feed Side Cover .............................................. 1-2
Finisher ................................. 1-3, 7-21, 7-22, 7-26
Finisher (Specification) .................................... 9-4
Finishing Mode and Finishers .......................... 6-2
Fixing the adjusters (stoppers) ........................... 12
Front Cover ...................................................... 1-2
FUNCTION CLEAR key ................................... 1-5
Function setting area ....................................... 1-6
G
General Copying Procedures ........................... 2-2
General Precautions .......................................... 10
H
Handing and Storing Paper .............................. 2-5
HELP key ......................................................... 1-4
Hole Punch Mode ............................................ 6-8
Hole Punch Unit ............................................... 1-3
Hole Punch Unit (Specification) ....................... 9-5
I
Image Editing ................................................... 4-8
Image Shift ....................................................... 4-2
Images are partially missing ............................ 8-4
In the Continuous Feed Mode ........................ 2-12
In the Single-feed Mode ................................. 2-12
Index keys ........................................................ 1-6
Installation (Precautions) ..................................... 9
Interrupt Copying ............................................ 2-14
INTERRUPT key .............................................. 1-5
Items for Daily Check ....................................... 8-2
J
Job Memory ..................................................... 5-5
JOB STATUS key ............................................. 1-4
L
Large Capacity Feeder ..................................... 1-3
Large Capacity Feeder (Specification) ............. 9-5
M
Magazine Sor t ................................................ 4-16
MAGAZINE SORT & SADDLE STITCH key .... 6-6
Magazine Sor t & Saddle Stitch Mode .............. 6-6
MAGAZINE SORT key ..................................... 6-6
Main Components ............................................ 1-2
Making Copies in the PRINT Mode ................ 4-29
Manual Copy Density Mode ........................... 3-12
Manual Paper Selection ................................... 3-3
Master code registration ................................. 5-20
Maximum Number of Sheets that can be Stapled . 6-5
Mirror Image ................................................... 4-10
Mixed-Sized Originals ...................................... 5-4
N
Names of the Main Components ..................... 6-2
Negative/Positive Re versal ............................. 4-11
O
Operating Instructions Pocket .......................... 1-2
Optional Equipment ......................................... 1-3
Original Glass .................................................. 1-2
Original Scale ................................................... 1-2
Overlay ........................................................... 4-30
Overlaying Originals with Stored Image ......... 4-32
P
Packing List ...................................................... 9-6
Page Numbering Copying .............................. 4-15
Paper Selection ................................................ 3-2
Paper Size Indicator ......................................... 1-2
Paper Misfeed inside of the Machine ............. 7-12
Paper Misfeed in the External LCF ................ 7-15
Paper Misfeed in the Finisher ......................... 7-18
Paper Misfeed in the Hole Punch Unit ........... 7-17
Paper Misfeed in the Reversing Automatic
Document Feeder........................................... 7-10
Paper Misfeed in the Saddle Stitch Unit MJ-1018 ...7-19
Paper Misfeed on the Bypass Guide .............. 7-15
Periodic Maintenance Message ..................... 7-30 
						

							12
3
4
5
6
78
9
10
11
12
9-9
Power Switch .................................................... 1-2
Precautions .......................................................... 9
Precautions for Using the Reversing Automatic
Document Feeder .......................................... 2-11
Print out Department Code ............................ 5-28
PRINTER/NETWORK key ................................ 1-4
Procedure to display the department code menu 5-21
Providing a Bookbinding Margin ...................... 4-3
Providing Right or Left Margin .......................... 4-2
Q
Quick Access Menu ....................................... 3-14
R
Recalling a Stored Combination of Copy Jobs to
Make Copies .................................................... 5-6
Reduction and Enlargement Copying .............. 3-4
Registering a New Depar tment Code ............ 5-22
Remaining paper level ..................................... 1-6
Removing Jammed Staples ........................... 7-26
Replace Toner  Bag ........................................... 7-8
Replace Toner  BOTTLE  Symbol ...................... 7-6
Reversing automatic document feeder ............. 1-2
S
SADDLE STITCH key ...................................... 6-6
Saddle Stitch Mode (Booklet mode) ................ 6-6
Saddle Stitch Unit ................................. 7-24, 7-27
Selecting Original Mode ................................. 3-13
Set functions confirmation key ......................... 1-7
Setting Copy Paper .......................................... 2-4
Setting Originals ............................................... 2-9
Setting Paper ................................................... 6-9
Setting Tab Paper in the Bypass Guide .......... 4-23
Setting Tab Paper in the Drawer ..................... 4-22
Setting the Other Size Key .......................... 5-14
Setting the Automatic Energy save mode ...... 5-16
Setting the Automatic Off-Mode ..................... 5-17
Setting the Drawer for Special Uses ................ 2-7
Setting the Clock to the Daylight Saving Time 5-15
Setting the Date and Time ............................. 5-15
Sharpness Adjustment ................................... 4-33
Sheet Insertion ............................................... 6-12
Sheet Inser tion Copying ................................. 4-20
Sheet Originals .............................................. 2-10
Simple Troubleshooting .................................... 8-3
Single-feed Mode ............................................. 5-3 Sort/Group Copying ......................................... 6-3
Specifications of Options ................................. 9-4
Specifying both Original Size and Copy Size ... 3-5
Staple Sorting .................................................. 6-4
START key ....................................................... 1-5
STOP key ......................................................... 1-5
Stopping the Copy Operation ......................... 2-15
Stopping the Multicopying Operation ............. 2-15
Stopping the Scanning of the Original ........... 2-15
Storing a Combination of Copy Jobs Settings .. 5-5
Storing a Non-Standard Size in the Memory . 5-12
Storing Documents in the MEMORIZE Mode 4-28
Storing Image ................................................. 4-30
Switching Languages ..................................... 5-18
T
Tab Paper 
Copying ......................................... 4-25
Tab Paper Insertion ........................................ 4-26
Tab Paper Insertion and Copying ................... 4-27
Tab Paper  Mode ............................................. 4-22
Tab Width Adjustment .................................... 4-23
TIMER lamp ..................................................... 1-5
Toner Bottle ...................................................... 1-2
Touch Panel .............................................. 1-4, 1-6
Transfer Unit ..................................................... 1-2
Transfer Unit Lever ........................................... 1-2
Tray Loading Capacity (Specification) .............. 9-4
Trimming/Masking ............................................ 4-8
Turning ON the Power Switch .......................... 1-8
U
User Selection ................................................ 5-19
Using only Stapling and Hole Punch .............. 6-13
Using the Reduction/Enlargement Zoom Keys or
One-touch Zoom Keys ..................................... 3-6
W
Weekly Maintenance ........................................ 8-2
Weekly Timer ................................................. 5-13
When Coming Across the Situations below ..... 2-3
When Placing an Original on the Glass ......... 2-10
When this message appears: Wait ................ 2-3
When Using the Reversing Automatic Document
Feeder ............................................................ 2-11
X
X-Y Zoom ......................................................... 4-7 
						

							memo