Panasonic Digital Imaging System For Copy Functions Dp 6530 Operating Instructions

							1
2
3
4
5
6
7
8
9
10
11
12
2-17
Changing the Printing Order
1
Press the  JOB STATUS  key on the control panel,
then the  JOB LIST  key on the touch panel.
2
Select the job you want to move.
3
Press the  MOVE  key, then press the position
where the selected job is to move to.
- The job to be moved will be shifted next to new priority.
- The job with top priority (having been printed or suspended)
cannot be moved.
4
The changing order is completed.
- If you want to return to the basic screen (before
JOB STATUS  key is pressed): 
 Page 2-16, Tip 
						

							1
2
3
4
5
6
7
8
9
10
11
12
2-18HOW TO MAKE COPIES 
						

							1
2
3
4
5
6
7
8
9
10
11
12
3-1
3. SETTING OF BASIC COPY
MODES
1. PAPER SELECTION ................................................................ 3-2
- Automatic Paper Selection (APS).............................................................. 3-2
- Manual Paper Selection............................................................................. 3-3
2. REDUCTION AND ENLARGEMENT COPYING ..................... 3-4
3. DUPLEX COPYING (1-SIDED, 2-SIDED, BOOK-TYPE) ......... 3-7
4. COPY DENSITY ADJUSTMENT ........................................... 3-11
5. SELECTING ORIGINAL MODE ............................................. 3-13
6. QUICK ACCESS MENU ........................................................ 3-14 
						

							12
3
4
5
6
78
9
10
11
12
3-2SETTING OF BASIC COPY MODES
4
Press the  START  key.
1. PAPER SELECTION
Automatic Paper Selection (APS)
- If the Automatic Paper Selection mode is not selected, press the  ZOOM···  key, then press the  APS  key on the
next screen.
- If the following messages are shown, proceed as directed:
When you place regular-sized originals on the glass or in the reversing automatic document feeder, the
built-in sensors automatically work to detect the size of the originals, helping the machine select and copy
on paper that is the same size as the original.
* Depending on the condition of the original, automatic paper selection may not work correctly. In that case, select the paper size manually. 
 Page 3-3
* This mode can only be used for actual-size (100%) copying.
* Original sizes capable of automatic detection 
 Page 2-9
2
Place the original(s).  Page 2-9
3
Confirm that the Automatic Paper Selection mode
(default setting) is selected on the basic screen.
1
Place paper in the drawer(s).  Page 2-4
 Select other copy modes as required. Change direction of original
Set correct drawer
When the selected drawer size and the original size are the
same, the machine rotates the original data 90° and makes a
copy in the same size as the original even if those directions
differ (e.g. a LT-size original is set while the same size paper is
set in R direction). This function, however, is applicable to plain
paper only. 
						

							12
3
4
5
6
78
9
10
11
12
3-3
3
On the basic screen, press the drawer icon
represent ing the desired paper size.
1
Place paper in the drawer(s).  Page 2-4
- When using this mode in bypass copying, be sure to specify the paper size. 
 Page 5-10, 5-11
Manual Paper Selection
It may not be possible for the device to perform Automatic Paper Selection with highly transparent
originals such as OHP films and tracing paper, wholly dark originals or originals with dark borders, or
irregular sized originals such as newspapers and magazines. For these types of originals, use manual
paper selection.
* When the desired size of paper is not set in any of the drawers, you can change the paper size of thedrawer (
 Page 2-6) or use the sheet bypass copying ( Page 5-8).
- Or press the  ZOOM···  key to enter the next screen, and
press the key of the desired paper size.
-  OTHER  key 
 Page 5-14
2
Place the original(s).  Page 2-9
 Select other copy modes as required.
4
Press the  START  key. 
						

							12
3
4
5
6
78
9
10
11
12
3-4SETTING OF BASIC COPY MODES
2. REDUCTION AND ENLARGEMENT COPYING
When placing originals on the glass, you can copy them at the reducing and enlarging rate of 25 to 400%.
For the reversing automatic document feeder, you can make the copy at the reducing and enlarging rate
of 25 to 200%.
There are the following three ways of making copies in the reduction and enlargement mode:
Using Automatic Magnification Selection (AMS)
Specifying both original size and copy size
Using the reduction/enlargement zoom keys or the one-touch zoom keys
* It is not possible for the device to perform Automatic Magnification Selection with highly transparent originals such as OHP films and tracing paper, wholly dark originals or originals with dark borders, or
irregular sized originals such as newspapers and magazines. For these types of originals, use the
other reduction/enlargement modes.
Original sizes for which Automatic Magnification Selection (automatic detection) is available 
 Page
2-9
* Set the paper size for “the OTHER” key as required (
 Page 5-14). When the set originals or paper
are a non-standard size other than LD, LG, LT or ST you will select the  OTHER  key on the screen
of step 3 below. Before pressing it, you need to make the  OTHER  key recognize the same size as
the originals or paper that have been set.
2
Press the desired drawer, then the  ZOOM···  key.
- The copy paper size is selectable on the screen in step 3
as well.
1
Place paper in the drawer(s).  Page 2-4
 
Automatic Magnification Selection (AMS)
3
Press the  AMS  key.
- OTHER  key  Page 5-14
4
Place the original(s).  Page 2-9
- The built-in sensors automatically detect the size of the original(s) and compute the reproduction ratio using
the specified paper size.
- If the following messages are shown, proceed as directed:
Change direction of original
Use reduced-size drawer
 Select other copy modes as required.
5
Press the  START  key. 
						

							12
3
4
5
6
78
9
10
11
12
3-5
4
Press the key corresponding to the original size.
- Using the original size and copy size, the correct reproduction ratio is computed and displayed on the
screen.
- OTHER  key 
 Page 5-14
  Specifying both Original Size and Copy Size
2
Place the original(s).  Page 2-9
3
Press the desired drawer, then the  ZOOM···  key.
- The copy paper size is selectable on the screen in step 4 as
well.
1
Place paper in the drawer(s).  Page 2-4
 Select other copy modes as required.
5
Press the  START  key. 
						

							12
3
4
5
6
78
9
10
11
12
3-6SETTING OF BASIC COPY MODES
2. REDUCTION AND ENLARGEMENT COPYING (Cont.)
3
Press the drawer icon representing the desired copy
paper size, then press the  ZOOM····  key.
- The copy paper size is selectable on the screen in step 4 as well.
4
Press the   UP (or   DOWN ) key to set the
desired reproduction ratio.
- Each time you press either key, the reproduction ratio changes by 1%. Holding down the key changes it continu-
ously.
- You can also select the reproduction ratio by pressing the 400% , 200% , 100% , 50%  or  25%  key directly. (When
placing the originals on the reversing automatic document
feeder, you cannot select  400%  key.)
- OTHER key 
 Page 5-14
2
Place the original(s).  Page 2-9
 Using the  Reduction / E nlargement Zoom Keys or One-touch Zoom Keys
1
Place paper in the drawer(s).  Page 2-4
 Select other copy modes as required.
5
Press the   START   key. 
						

							1
2
3
4
5
6
7
8
9
10
11
12
3-7
-12-
-13-
-15- -12- -13- -15--13-
-13-
3. DUPLEX COPYING (1-SIDED, 2-SIDED, BOOK-TYPE)
This function allows you to set the type of originals (1-sided, 2-sided or book-type) and the desired type
of copying (1-sided or 2-sided).
Original Copy
*  cannot be used by OHP film. 
						

							12
3
4
5
6
78
9
10
11
12
3-8SETTING OF BASIC COPY MODES
3. DUPLEX COPYING (1-SIDED, 2-SIDED, BOOK-TYPE) (Cont.)
3
Press the key (shaded) on the right basic screen.
- The default setting is 1-Sided Originals to 1-Sided Copies.
Book-Type Originals  2-Sided Copies
1
Follow the same procedure 1 to 3 as shown above.
1
Place paper in the drawer(s).  Page 2-4
- When using the mode of 1-Sided Originals to 2-Sided Copies and 2-Sided Originals to 2-Sided Copies in bypass copying,
be sure to specify the paper size. 
 Page 5-10,5-11
 Select other copy modes as required.
5
Press the  START  key.
- When placing originals on the glass, perform from steps 5
on page 2-2 to step 6 on page 2-3 continuously.
4
Press the key as required.
- When using the mode of Book-Type Originals to 2-SidedCopies, follow the procedure below.
2
Place the original(s).  Page 2-9
* The acceptable paper sizes for this function are LT only.