Panasonic Digital Imaging System For Copy Functions Dp 6530 Operating Instructions

							1
2
3
4
5
6
7
8
9
10
11
12
6-1
6. SELECTING FINISHING
MODES
(USING THE OPTIONAL FINISHERS)
1. FINISHING MODES AND FINISHERS (OPTIONAL) ............... 6-2
2. SORT/GROUP COPYING ........................................................ 6-3
3. STAPLE SORTING (OPTIONAL) ............................................. 6-4
4. MAGAZINE SORT &
SADDLE STITCH MODE (BOOKLET MODE) ........... 6-6
5. HOLE PUNCH MODE (OPTIONAL) ........................................ 6-8 
						

							1
2
3
4
5
6
7
8
9
10
11
12
6-2SELECTING FINISHING MODES
1. FINISHING MODES AND FINISHERS (OPTIONAL)
There are 2 types of optional finishers (2-Bin Finisher/DA-FS810
and 2-Bin Saddle-Stitch Finisher/DA-FS815).
Functions available differ depending on whether a finisher is
installed  and which type of finisher it is.
- Press the key on the basic screen on the right (shaded), and
confirm the finishing modes on the panel.
* The touch panel used in this chapter appears when the optional
2-Bin Saddle-Stitch Finisher (DA-FS815) is installed with your
machine.
Names of the Main Components
When the finisher trays reach their maximum loading capacity
(
 Page 9-4), the following message appears:
Hole Punch Unit
(DA-SP81) Upper Cover
Tr a y s
Front Cover
Saddle Stitch Tray
(DA-FS815 only)Lower Cover
Remove the copies from the trays and the machine
automatically resumes making machine.   Remove paper from the finisher 
						

							1
2
3
4
5
6
7
8
9
10
11
12
6-3
Select other copy modes as required.
5
Press the   START  key.
2. SORT/GROUP COPYING
To make multiple copies, you can select the sort mode or group mode as necessary.
The paper sizes available for sort/group copying are LD (Ledger), LG (Legal), LT (Letter) and LT-R
(Letter-R).
 Example of making 5 sets of copies from 5-page originals
- Sort copying
- Group copying
1
Place paper in the drawer(s).  Page 2-4
2
Place the original(s).  Page 2-9
54321
54321
54321
54321
54321
54321
44444
33333
55555
54321
22222
11111
3
Press the key on the basic screen as shown on the
right (shaded).
When originals are placed in the reversing automatic
document feeder, the sort mode is automatically selected.
4
Press the  SORT  (or  GROUP ) key. 
						

							1
2
3
4
5
6
7
8
9
10
11
12
6-4SELECTING FINISHING MODES
2
Place the original(s).  Page 2-9
3. STAPLE SORTING (OPTIONAL)
1
Place paper in the drawer(s).  Page 2-4
- When using this mode in bypass copying (
 Page 5-8), be
sure to specify the paper size. When the optional finisher is installed, you can use the function that performs automatic stapling at one
of the following three positions.
* The paper weight should be in the range of 16 lb Bond - 28 lb Bond. Special paper such as OHP films
or labels is excluded.
* Stapling cannot be worked when the papers with different width are mixed.
3
Press the key on the basic screen as shown on the
right (shaded).
AB
AB
AB
DOUBLE STAPLE SINGLE STAPLE - 1
AB
AB
LT (Letter)             LT (Letter)
LD (Ledger)
LG (Legal),
LT-R (Letter-R)LD (Ledger), LG (Legal), LT-R (Letter-R)
AB
AB
LT (Letter)
SINGLE STAPLE - 2
AB 
						

							1
2
3
4
5
6
7
8
9
10
11
12
6-5
5 
Press the   START   key.
- If the paper quantity exceeds the maximum number of sheets
that can be stapled, the finisher automatically enters the
sort mode.
4
Press the SINGLE STAPLE-1 (or DOUBLE STAPLE
,  SINGLE STAPLE-2  ) key.
Select other copy modes as required.
Maximum Number of Sheets that can be Stapled
Paper size
LT (Letter)
LD (Ledger), LG (Legal),
LT-R (Letter-R)
When papers with different weights are loaded, the maximum number of sheets that can be stapled is
that of the paper with the highest weight.
* When mixed-sized papers with the same width are loaded, the maximum number of sheets that can be
stapled is shown in the lower row.
* Do not exceed the maximum number of sheets that can be stapled for 24 lb Bond and 28 lb Bond paper
(See the above table). They may not be exited normally.
* Tray loading capacity 
 Page 9-4
DA-FS810/FS815
* The value in parentheses is the specification when installing the staple cartridge for stapling 50 sheets.
- After the type of staple cartridge is switched, be sure to turn OFF the power then turn it ON.20 lb Bond
(Plain paper)
50 sheets
30 sheets24 lb Bond
(Thick 1)
30 sheets
15 sheets28 lb Bond
(Thick 1)
30 sheets
15 sheets
Paper weight 
						

							1
2
3
4
5
6
7
8
9
10
11
12
6-6SELECTING FINISHING MODES
12321
11 29 47 6
5 83 101 12
7 6
7 6
12321
3
Place the original(s).  Page 2-9
- When placing them in the reversing automatic document
feeder, set them by referring to the order of pages in the
illustrations above.
- When placing them on the glass, place the first page of the
originals first if  MAGAZINE SORT  or  MAGAZINE SORT &
SADDLE STITCH is selected. If SADDLE STITCH is
selected, set them in the order of pages 12-1, (2-11), 10-3,
(4-9), then 8-5, (6-7) by referring to the illustration above as
an example.
4. MAGAZINE SORT & SADDLE STITCH MODE (BOOKLET MODE)
When the Magazine Sort mode is selected, 1-sided originals can be copied and bound like magazines or
booklets.  When a 2-Bin Saddle-Stitch Finisher (DA-FS815) is installed, you can select the saddle stitch
mode which will automatically staple in the center of the document. LD, LT-R, A3, A4-R, B4 are available.
* Special paper such as OHP films or labels is excluded.
* Available paper weight for saddle stitch should be in the range of 16 lb Bond -28 lb Bond.
Example of copying a 12-page document
1
Place paper in the drawer(s).  Page 2-4
- When  MAGAZINE SORT & SADDLE STITCH  is selected
- When  SADDLE STITCH  is selected
* You can also select the Magazine Sor t mode from the editing menu.  Page 4-16 - When  MAGAZINE SORT  is selected
2
Set the paper size.
For drawer feeding  Page 3-3, step 3
For bypass feeding 
 Page 5-10, step 4 
						

							1
2
3
4
5
6
7
8
9
10
11
12
6-7
5
Press the  MAGAZINE SORT  ( or  MAGAZINE SORT
 & SADDLE STITCH  or  SADDLE STITCH  ) key.
- If the desired function keys are not displayed, press the
Next  key to change the menu screen.
4
Press the key on the basic screen as shown on the
right (shaded).
Available Conditions for Saddle Stitch
Select other copy modes as required.
6
Press the   START  key.
When placing original(s) on the glass, perform steps 5 to 6
on page 2-2 to 2-3.
When paper of different weights is loaded, the maximum number of sheets that can be stapled will be that
of the paper with the highest weight.
Paper size
LD
(Ledger)
LT- R
(Letter-R)Paper weight
20 lb Bond
(Plain paper)
24 lb Bond
(Thick 1)
28 lb Bond
(Thick 1)
Maximum capacity for saddle stitch
10 sheets
10 sheets
10 sheets
When the tray load capacity is exceeded, automatically switching to magazine sort mode.
Tray load capacity
Copying of 11-15 sheets: 10 copies
Copying of 6 -10 sheets: 20 copies
Copying of 5 sheets or less: 25 copies
Copying of 11-15 sheets: 10 copies
Copying of 6 -10 sheets: 20 copies
Copying of 5 sheets or less: 25 copies
Copying of 6 - 8 sheets: 15 copies
Copying of 5 sheets or less: 25 copies 
						

							1
2
3
4
5
6
7
8
9
10
11
12
6-8SELECTING FINISHING MODES
2
Place the original(s).  Page 2-9
3
Press the key on the basic screen as shown on the
right (shaded).
4
Press the  HOLE PUNCH  key.
- If the desired function keys are not displayed, press the
Next  key to change the menu screen.
5. HOLE PUNCH MODE (OPTIONAL)
1
Place paper in the drawer(s).  Page 2-4
- When using this mode in bypass copying (
 Page 5-8), be
sure to specify the paper size. With the optional hole punch unit (DA-SP81) attached to the optional finisher (DA-FS810/FS815), you
can have your copies punched with holes.
* The paper weight should be in the range of  17 lb. Bond - 140 lb. Index.  Special paper such as OHP
films or labels is excluded.
You can have the tab paper punched with hole by the User Selection ( Page 5-19).
Select other copy modes as required.
5
Press the   START  key.
Number of punch holes and available paper sizes:
Since the number of punch holes and the distance between
the holes vary depending on the country, purchase a hole
punch unit that meets your requirements. (For details, consult
your service technician.)
Number of punch holes and hole diameter
2/3 holes switchable
(0.315” dia.)Available paper sizes
2 holes:  LG, LT-R
3 holes:  LD, LT, A3, A4 
						

							1
2
3
4
5
6
7
8
9
10
11
12
7-1
7. WHEN THE GRAPHIC SYMBOLS
FLASH  ON THE TOUCH  PANEL
1. DESCRIPTION OF THE FLASHING GRAPHIC SYMBOLS .... 7-2
2. ADD PAPER SYMBOL ............................................................. 7-3
- Adding Paper to the Drawers ..................................................................... 7-3
- Adding Paper to the Tandem LCF (Large Capacity Feeder) ....................... 7-4
- Adding Paper to the External LCF (Large Capacity Feeder) (optional) ...... 7-5
3. REPLACE TONER BOTTLE    SYMBOL .............................. 7-6
4. CLEAR PAPER  
  SYMBOL .................................................. 7-9
 Reversing Automatic Document Feeder ................................................. 7-10
 Inside of the Machine ............................................................................. 7-12
 Paper Misfeed on the Bypass Guide...................................................... 7-15
 External LCF (Optional) .........................................................................7-15
 Hole Punch Unit (Optional) ..................................................................... 7-16
 Finisher (Optional).................................................................................. 7-17
 Saddle Stitch Unit (Optional) .................................................................. 7-18
5. ADDING STAPLES (OPTIONAL) ........................................... 7-20
6. REMOVING JAMMED STAPLES (OPTIONAL) ..................... 7-24
7. DISPOSING OF ACCUMULATED
PUNCHED PAPER BITS (OPTIONAL) ........ 7-27
8. CALL SERVICE  
  SYMBOL /
PERIODIC MAINTENANCE MESSAGE ...... 7-28 
						

							1
2
3
4
5
6
7
8
9
10
11
12
7-2WHEN THE GRAPHIC SYMBOLS FLASH ON THE TOUCH PANEL
1. DESCRIPTION OF THE FLASHING GRAPHIC SYMBOLS
The graphic display on the touch panel shows the
status of the machine. When one of the graphic
symbols flashes, take the appropriate action referring
to the page shown.
When one of the graphic symbols flashes, press
the  
 HELP  key to display the guidance.
REPLACE TONER BAG    symbol
Flashes when the toner bag becomes full of
used toner. Please call your service
technician to ask to have the used toner bag
replaced with a new one. 
 Page 7-8
INVERTER MISFEED    symbol
Flashes if a paper misfeed occurs in the
inverter during duplex copying. 
 Page 7-12
SADDLE STITCH UNIT MISFEED    symbol
Flashes if a paper misfeed occurs inside the
saddle stitch of the finisher (option).
 Page 7-19
FINISHER/HOLE PUNCH UNIT MISFEED  
symbol
Flashes if a paper misfeed occurs inside the
finisher (optional) or the hole punch unit
(optional). 
 Page 7-17, 7-18
CALL SERVICE       symbol
Flashes if inspection and maintenance by
your service technician become necessary.
 Page 7-30
CHECK ORIGINALS    symbol
Flashes if an original misfeed occurs inside
the reversing automatic document feeder.
 Page 7-10
PAPER EXIT MISFEED    symbol
Flashes if a paper misfeed occurs at the
paper exit. 
 Page 7-12
PAPER PATH MISFEED    symbol
Flashes if a paper misfeed occurs on the
paper path inside the machine. 
 Page 7-12
BYPASS MISFEED    symbol
Flashes if a sheet of paper fails to be fed into
the machine during bypass copying.
 Page 7-15
REPLACE TONER  BOTTLE     symbol
Flashes when the toner bottle runs out of
toner. 
 Page 7-6
EXTERNAL LCF MISFEED    symbol
Flashes if paper fed from the External LCF
(optional) is misfed. 
 Page 7-15
DRAWER MISFEED    symbol
Flashes when paper fed from one of the drawers
is misfed. 
 Page 7-12
DUPLEXER MISFEED    symbol
Flashes if a paper misfeed occurs inside the
automatic duplexer. 
 Page 7-12