Panasonic Digital Imaging System For Copy Functions Dp 6530 Operating Instructions

							12
3
4
5
6
78
9
10
11
12
9
1
Handle and use the machine gently and carefully.
 Do not place anything on the paper drawers or the original feeding tray.
 Never allow the power cable to be trampled on or pinched between hard objects, otherwise an accident or electrical trouble might occur.
 Do not allow any metal items such as paper clips to fall into the machine.
2
Be sure to turn OFF the power switch (unless using the weekly timer mode):
 When you leave your office at night.
 If a power failure occurs.
Caution: When turning OFF the power  switch, be sure to do so only after the machine cycling
has come to a complete stop.
Be sure to disconnect the power-cord plug:  When you do not intend to use the machine for an extended period of time.
Be sure to turn OFF the power switch immediately and call for service:  If an unusual noise is heard from the machine.
 If the outside of the machine becomes unusually hot.
 If any part of this machine is damaged, or if it has been dropped.
 If the machine has been exposed to rain or liquid.
3
It is recommended that only supplies made or designated by Panasonic be used for
the DP-6530/8130 in order to optimize copy quality. All supplies should be stored in a
cool, dry area.
For optimum performance, it is recommended that 20 lb Bond xerographic bond paper of high quality
be used. Paper of lower quality may contain inherent properties such as excess paper dust and may
lead to premature servicing.
WARNING:
1. Do not apply force or place heavy objects (8.82 lb or more) on the original glass. Breaking theglass may cause personal injury.
2. Do not place heavy objects on the machine. They may fall and injure you.
3. Do not lean on, apply force or place heavy objects on the Finisher (optional). Personal injury or proper ty damage may result.
4. Do not place some objects or step on the external LCF (Large Capacity Feeder) (optional). They may fall and injure you.
PRECAUTIONS (Cont.)
2. General Precautions 
						

							12
3
4
5
6
78
9
10
11
12
10
Explanatory Label
CLASS 1 LASER PRODUCT
APPAREIL A LASER DE CLASSE 1
LASER KLASSE 1
PRODUCTO DE LASER DE CLASE 1 >PS<
Certification LabelPRODUCT    IS      CERTIFIED       BY     THE
MANUFACTURER TO COMPLY WITH DHHS
RULE 21 CFR SUBCHAPTER J APPL I CABLE
AT THE DATE OF MANUFACTURE.
MANUFACTURED:
JS
M
Warning Label
High Temperature Warning Areas 
						

							12
3
4
5
6
78
9
10
11
12
11
  Fixing the adjusters (stoppers)
There are four adjusters (stoppers) located in front and rear bottom
(two adjusters each) of the machine. After moving/installing the
machine, be sure to turn the adjusters clockwise to fix them firmly
on the ground. * To unlock the adjusters when moving the machine, turn them counterclockwise.
If the machine is not steady, it may fall over and result in
personal injury.
To lock
To unlock
2. General Precautions (Cont.)
PRECAUTIONS (Cont.) 
						

							1
2
3
4
5
6
7
8
9
10
11
12
1-1
1. BEFORE MAKING COPIES
1. DESCRIPTION OF THE DIGITAL IMAGING SYSTEM
AND THE OPTIONAL EQUIPMENT .......... 1-2
- Main Components...................................................................................... 1-2
- Optional Equipment.................................................................................... 1-3
- Control Panel .............................................................................................1-4
- Touch Panel ...............................................................................................1-6
2. TURNING ON THE POWER SWITCH ..................................... 1-8
- Turning ON the Power Switch/Auto Job Start ............................................. 1-8
- Controlling the Use of the Machine with Department Codes ...................... 1-9
- Controlling the Use of the Machine with the Optional Key Copy Counters ..1-10 
						

							1
2
3
4
5
6
7
8
9
10
11
12
1-2BEFORE MAKING COPIES
1. DESCRIPTION OF THE DIGITAL IMAGING SYSTEM  AND THE OPTIONAL EQUIPMENT
Main Components
Original Scales
Control Panel
Drawers
Paper Size IndicatorFeed Side Cover Bypass Guide
Toner BottleFront Cover Exit Cover Power SwitchReversing Automatic Document Feeder
Operating Instructions Po cket
(Back Side)
Transfer Unit
Transfer Unit LeverOriginal Glass
Tandem LCF
(Large Capacity Feeder)
Touch Panel Contrast Adjustment Volume
(Back Side of the Control Panel)
* When adjusting the contrast of the touch panel,
pull the toner bottle holder out, and turn the
volume on the backside of the control panel.
Bypass Cover 
						

							1
2
3
4
5
6
7
8
9
10
11
12
1-3
Optional Equipment
Finisher
2-Bin Finisher (DA-FS810)
2-Bin Saddle-Stitch Finisher (DA-FS815)
Enables the use of sort, group and staple modes, plus the hole punch (available when the optional hole
punch unit is installed) and saddle-stitch model.
Hole punch unit (DA-SP81)
Makes punching holes on copies for binding in notebooks.
External LCF (Large Capacity Feeder) (DA-MA810)
Feeds up to 4000 sheets of LT-sized paper (20 lb Bond) (recommended by Panasonic) continuously.
Optional Equipment Configuration
Finisher
Hole Punch Unit
External LCF
(Large Capacity Feeder) 
						

							12
3
4
5
6
78
9
10
11
12
1-4BEFORE MAKING COPIES
1. DESCRIPTION OF THE DIGITAL IMAGING SYSTEM AND THE OPTIONAL EQUIPMENT (Cont.)
Control Panel
Total Counter
Shows the total of copied paper since the set up of the machine.
  HELP  key
When this key is pressed, the appropriate operation procedures are displayed.
  PRINTER/NETWORK   key
Press this key to switch between the printer and the network (optional) functions.
   COPY   key
Press this key to select the copy functions.
JOB STATUS   key
Press this key to monitor the statuses of 1) Job list, 2) Deleting jobs, 3) Moving jobs, 4) Copying status
and 5) Setting drawers. This key flashes in case of 1) No paper in the drawers, 2) Incorrect drawer
setting, 3) Full of paper in the finisher and 4) Hole punching dust bi\
n is full
Touch Panel
Displays the machine conditions, operating procedures, and various instructions and information to the
user in text and illustrations.
Digital keys
Use these keys to enter the number of copies you want to make and so on.
 CLEAR   key
Use this key to correct numbers entered with the digital keys such as an incorrect copy quantity. 
						

							1
2
3
4
5
6
7
8
9
10
11
12
1-5
 FUNCTION CLEAR   key
When this key is pressed, all selected copy modes are cleared to default settings. 
 Page 2-2
* Automatic Function Clear 
 Right bottom of this page
  STOP   key
Use this key to stop an ongoing scan and copy operation. 
 Page 2-15
  START   key
Press this key to start copying.
 INTERRUPT   key
While copying is already in progress, press this key when you want to make copies of different originals.
Pressing the key again will return you to the previous copy job.
 ENERGY SAVER   key
When you are not going to use the machine for a while, press this key, which automatically turns off all
display lamps. To resume copying, press this key again.
If you press this key when the optional printer controller is installed, the power supply to the printer
board is not cut off, which allows automatic return of the device when it receives printer data.
TIMER Lamp
TIMER lamp lights when the weekly timer is being used.
Clip Tray
Put clips or staples unfastened out of originals.
Automatic Function Clear
Even if you do not press the  
FUNCTION CLEAR
key, within the specified period of time after copying
is finished or after the last key is pressed in a copy
procedure, the automatic function clear mode will
work to clear all settings to defaults, and the basic
screen or the quick screen will be displayed.
While the department management function is
being operated, the display returns to the depart-
ment code input screen. 
 Page 1-9 
						

							12
3
4
5
6
78
9
10
11
12
1-6BEFORE MAKING COPIES
1. DESCRIPTION OF THE DIGITAL IMAGING SYSTEM AND THE OPTIONAL EQUIPMENT (Cont.)
Touch Panel
The following information is shown on the touch panel:
Machine status, operational instructions, cautionary messages, reproduction ratios, total copy quantity,
paper size of a selected drawer and amount of paper in a selected drawer.
When the power is  turned on, and ‘READY’ is displaye d, the following basic screen is shown on the touch
panel.
On the screen, currently set functions, selected functions and the machine status are shown using
messages and illustrations.
* The contents of the touch panel screens on this manual show a machine equipped with full-options.
Function setting area Total copy quantity
Reproduction ratio
Message
Index keys
Set functions confirmation key
Message Display
Touch-keys
Currently selected drawer size
Quick access key
Remaining paper level
Various function items are touch-key selectable. Press any key lightly with your finger.
- Index keys
Used for switching between Basic, Editing, and Program menus.
- QUICK (Quick access) key
Frequently used finishing mode and duplex copying can be simultaneously set on one screen. This screen
is also easier for visually impaired persons to see by displaying black letters on white background.
The  Quick  (Quick access) key is not indicated on the touch panel in the initial setting.
To use the  Quick  (Quick access) key, contact your authorized service representative.
- Function setting area
This is where you select or set various functions.