Home > NEC > Communications System > NEC Neax 2400 Imx Circuit Card Manual

NEC Neax 2400 Imx Circuit Card Manual

    Download as PDF Print this page Share this page

    Have a look at the manual NEC Neax 2400 Imx Circuit Card Manual online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 1168 NEC manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.

    							CHAPTER 3 ND-70182 (E)
    Page 256
    Revision 4.0
    PA - 1 6 E L C J
    Electric Line Current
    7. Switch Setting Sheet
    MODULE SLOT No. SWITCH NAME SWITCH SHAPE REMARKS
    PIMSW00
    (MB)
    SW01
    ON
    12345678ON 
    						
    							ND-70182 (E) CHAPTER 3Page 257
    Revision 4.0
    PA-16ELCJ-B
    Electronic Line Circuit
    PA-16ELCJ-B
    Electronic Line Circuit
    1. General Function
    The PA-16ELCJ-B (ELC) circuit card provides an interface between D
    term and IMX. Depending upon the
    switch settings, this card works in the following two modes.
     16 ELC mode: A maximum of 16 sets of D
    terms can be conn ected to this card. (voice communications
    only)
     8 DLC mode: A maximum of 8 sets of D
    terms can be connected to this card. (simultaneous voice and
    data communications)
    Figure 3-58   Location of PA-16ELCJ-B (ELC) Card within the System
    Ta b le  3 -3  Perfo rma nce
    D
    term SERIES E Dterm SERIES III
     24 digits wide of Liquid Crystal Display (LCD).
     Month and year displays following the time and date.
     Software keys are available and the software keys are controlled by the 
    system. Thus, key function data can be changed by office data. 
    16 digits wide of LCD.
     Month and year are not displayed.
     Software key is not available.
    Dterm
     #0DTE
    Data Adapter
    Dterm #7DTE
    Data Adapter
    Dterm #0
    Dterm #15
    IMX IMX
     16 ELC MODE  8 DLC MODE
    ELCELC 
    						
    							CHAPTER 3 ND-70182 (E)
    Page 258
    Revision 4.0
    PA - 1 6 E L C J - B
    Electronic Line Circuit
    2. Mounting Location/Condition
    The PA-16ELCJ-B (ELC) card can be mounted in any universal slots as shown below.
    3. Face Layout of Lamps, Switches, and Connectors
    The face layout of lamps, switches, and connectors on this circuit card is shown in Figure 3-59.
    Figure 3-59   Face Layout of PA-16ELCJ-B (ELC) Card
    PIMMounting Module
    00 01 02 03 04 05 06 07 08 09 10 11 12 13 14 15 16 17 18 19 20 21 22 23
    PALM SW00 (MB)
    BL15
    OPE
    SW10 SW11
    BL0 
    						
    							ND-70182 (E) CHAPTER 3
    Page 259
    Revision 4.0
    PA-16ELCJ-B
    Electronic Line Circuit
    4. Lamp Indications
    The contents of lamp indications on this circuit card are shown in the table below.
    Note:When the PALM lamp lights red, observe the following instructions. 
    i) Identify the location where any in-house wires have a short circuit as to all lines which belong to the
    PA-16ELCJ-B card whose PALM is on. 
    ii) Repair the short-circuited wires of the associated D
    term.
    iii) Disconnect the D
    term from the jack, then leave it disconnected for at least 1 minute. 
    iv) Connect the D
    term again.
    LAMP NAME COLOR STATE
    OPEGreen Remains lit while on-line operations are normal.
    OFF Off when on-line operations are abnormal.
    PA L MRed Lights red when power supply circuit(s) is abnormal. Note
    OFF Off when all the power supply circuits are normal.
    BL0
    BL15Green Lights when the corresponding circuit is busy.
    FlashFlashes when the corresponding circuit is in make-busy state or station data has not been 
    assigned.
    OFF Off when the corresponding circuit is idle.
    ~ 
    						
    							CHAPTER 3 ND-70182 (E)
    Page 260
    Revision 4.0
    PA - 1 6 E L C J - B
    Electronic Line Circuit
    5. Switch Settings
    Switches on the PA-16ELCJ-B card have the following meanings. 
    Note:When using firmware SP-3419, set SW10-1=OFF, SW10-2=ON.
    SWITCH FUNCTION SWITCH SETTING MEANING
    SW00 (MB)Circuit Card Make-
    busy keyCircuit Card Make-busy Cancel.
    Circuit Card Make-busy.
    SW10
    1-2LP-PM
    Interface mode 
    setting/Group 
    No. setting
    NoteIn case of this circuit card is used from No. 0 to 
    25 group.
    Expanded Multiple Line Operation-Dterm is 
    available.
    In case of this circuit card is used from No. 26 to 
    31 group (Expansion Group).
    Expanded Multiple Line Operation-Dterm is 
    available.
    In case of this circuit card is used from No. 0 to 
    25 group.
    Expanded Multiple Line Operation-Dterm is 
    available.
    Not used
    3-4ELC/DLC
    mode settingThis circuit card operates in 16 ELC mode.
    This circuit card operates in 8 DLC mode.
    Do not set another combination.
    5Analog Port
    Adapter settingAnalog Port Adapter is available.
    Analog Port Adapter is not available.
    6-8
    —
    Fixed to “OFF”.
    SW11
    1-8
    —
    Fixed to all “OFF”.
    Details 
    are shown
     in next table.
    1ON2345678
    OFF
    1ON2345678
    OFF
    1ON2345678
    OFF
    1ON2345678
    OFF
    12345678ON
    OFF
    12345678ON
    OFF
    1ON2345678
    OFF
    1ON2345678
    OFF
    1ON2345678
    OFF
    1ON2345678
    OFF 
    						
    							ND-70182 (E) CHAPTER 3
    Page 261
    Revision 4.0
    PA-16ELCJ-B
    Electronic Line Circuit
    SW10-3: OFF, SW10-4: OFF SW10-3: OFF, SW10-4: ON
    SW10-5: OFF16 set of D
    terms per card.
    Voice Communication only.8 set of Dterms per card.
    Data Adapter is used.
    SW10-5: ON16 set of D
    terms per card.
    Analog Port Adapter is used (Either D
    term or 
    Analog terminal can be used at the same time).8 set of D
    terms per card.
    Analog Port Adapter is used (Both D
    term and 
    Analog terminal can be used at the same time). 
    						
    							CHAPTER 3 ND-70182 (E)
    Page 262
    Revision 4.0
    PA - 1 6 E L C J - B
    Electronic Line Circuit
    6. External Interface
    Depending upon the applied mode (16ELC/8 DLC mode), external interface leads appear on the LT
    connectors as follows.
    16ELC mode
    Figure 3-60   LT Connector Lead Accommodation (16ELC Mode) (1/2)
    PIMMounting Module
    26272829303132333435363738394041
    1234567891011121314151642434445464748
    1718192021222349502425
    232221201918171615141312111009080706050403020100
    LT6 LT7 LT8 LT9 LT10 LT11LT0 LT1 LT2 LT3 LT4 LT5
    23 19 15
    22 18 14
    21 17 13
    20 16 1223 19 15
    22 18 14
    21 17 13
    20 16 12 11 09 07 05 03 01
    10 08 06 04 02 00 11 09 07 05 03 01
    10 08 06 04 02 00
    31 29 27
    30 28 26 31 29 27
    30 28 26
    Group No.
    Group No.
    (Expansion Group)
    Highway Block
    Slot No.
    LT Connector
    PIMLT 1, 3, 5, 7, 9, 11 Connector
    26272829303132333435363738394041
    1234567891011121314151642434445464748
    1718192021222349502425
    B0
    B1A0
    Accommodated in   1
    LT 0, 2, 4, 6, 8, 10 Connector
    A1
    A2
    A3 B2
    B3Accommodated in   2
    B4
    B5A4
    A5
    A6
    A7 B6
    B7
    B8
    B9A8
    A9
    A10
    A11 B10
    B11
    B12
    B13A12
    A13
    A14
    A15 B14
    B15B0
    B1A0
    A1
    A2
    A3 B2
    B3
    B4
    B5A4
    A5
    A6
    A7 B6
    B7
    B8
    B9A8
    A9
    A10
    A11 B10
    B11
    B12
    B13A12
    A13
    A14
    A15 B14
    B15
    121212121212
    HW0HW1HW2 HW3HW4HW5HW6HW7HW8 HW9HW10HW11 
    						
    							ND-70182 (E) CHAPTER 3
    Page 263
    Revision 4.0
    PA-16ELCJ-B
    Electronic Line Circuit
    Figure 3-60   LT Connector Lead Accommodation (16ELC Mode) (2/2)
    PIMMounting Module
    26272829303132333435363738394041
    1234567891011121314151642434445464748
    1718192021222349502425
    232221201918171615141312111009080706050403020100
    LT6 LT7 LT8 LT9 LT10 LT11LT0 LT1 LT2 LT3 LT4 LT5
    23 19 15
    22 18 14
    21 17 13
    20 16 1223 19 15
    22 18 14
    21 17 13
    20 16 12 11 09 07 05 03 01
    10 08 06 04 02 00 11 09 07 05 03 01
    10 08 06 04 02 00
    Highway Block
    Slot No.
    LT Connector
    PIMLT 1, 3, 5, 7, 9, 11 Connector
    26272829303132333435363738394041
    1234567891011121314151642434445464748
    1718192021222349502425
    B0
    B1A0
    Accommodated in   3
    LT 0, 2, 4, 6, 8, 10 Connector
    A1
    A2
    A3 B2
    B3
    B4
    B5A4
    A5
    A6
    A7 B6
    B7B8
    B9A8
    A9
    A10
    A11 B10
    B11
    B12
    B13A12
    A13
    A14
    A15 B14
    B15
    333333
    HW0HW1HW2 HW3HW4HW5HW6HW7HW8 HW9HW10HW11
    31 29 27
    30 28 26 31 29 27
    30 28 26
    Group No.
    Group No.
    (Expansion Group) 
    						
    							CHAPTER 3 ND-70182 (E)
    Page 264
    Revision 4.0
    PA - 1 6 E L C J - B
    Electronic Line Circuit
    8DLC mode 
    Figure 3-61   LT Connector Lead Accommodation (8DLC Mode)
    PIMMounting Module
    26272829303132333435363738394041
    1234567891011121314151642434445464748
    1718192021222349502425
    232221201918171615141312111009080706050403020100
    LT6 LT7 LT8 LT9 LT10 LT11LT0 LT1 LT2 LT3 LT4 LT5
    23 19 15
    22 18 14
    21 17 13
    20 16 1223 19 15
    22 18 14
    21 17 13
    20 16 12 11 09 07 05 03 01
    10 08 06 04 02 00 11 09 07 05 03 01
    10 08 06 04 02 00
    Slot No.
    LT Connector
    PIMLT 1, 3, 5, 7, 9, 11 Connector
    26272829303132333435363738394041
    1234567891011121314151642434445464748
    1718192021222349502425
    Accommodated in   2
    LT 1, 3, 5, 7, 9, 11 ConnectorAccommodated in   3
    26272829303132333435363738394041
    1234567891011121314151642434445464748
    1718192021222349502425
    B0
    B1A0
    Accommodated in   1
    LT 0, 2, 4, 6, 8, 10 Connector
    A1
    A2
    A3 B2
    B3
    B4
    B5A4
    A5
    A6
    A7 B6
    B7B0
    B1A0
    A1
    A2
    A3 B2
    B3
    B4
    B5A4
    A5
    A6
    A7 B6
    B7
    B0
    B1A0
    A1
    A2
    A3 B2
    B3
    B4
    B5A4
    A5
    A6
    A7 B6
    B7
    123123123123123123
    Highway BlockHW0HW1HW2 HW3HW4HW5HW6HW7HW8 HW9HW10HW11
    31 29 27
    30 28 26 31 29 27
    30 28 26
    Group No.
    (Expansion Group)Group No. 
    						
    							ND-70182 (E) CHAPTER 3
    Page 265
    Revision 4.0
    PA-16ELCJ-B
    7. Switch Setting Sheet
    MODULE SLOT No. SWITCH NAME SWITCH SHAPE REMARKS
    PIMSW00
    (MB)
    SW10
    SW11
    ON
    12345678ON
    12345678ON 
    						
    All NEC manuals Comments (0)

    Related Manuals for NEC Neax 2400 Imx Circuit Card Manual