Home > Motorola > Wireless > Motorola Wing 5 Manual

Motorola Wing 5 Manual

Add to Favourites
    Download as PDF Print this page Share this page

    Have a look at the manual Motorola Wing 5 Manual online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 249 Motorola manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.

    View all the pages
    Page
    of 1128
    Add page 871 to Favourites
    image text
    Enable zoom 
    							FIREWALL-POLICY 14 - 29
14.1.11 proxy-arp
firewall-policy
Enables the generation of ARP responses on behalf of another device
Supported in the following platforms:
 AP300
 AP621
 AP650
 AP6511
 AP6521
 AP6532
 AP71XX
 RFS4000
 RFS6000
 RFS7000
 NX9000
 NX9500
Syntax
proxy-arp
Parameters
None
Examples
rfs7000-37FABE(config-fw-policy-test)#proxy-arp
rfs7000-37FABE(config-fw-policy-test)#
Related Commands
noResets values or disables proxy ARP commands
    Add page 872 to Favourites
    image text
    Enable zoom 
    							14 - 30 WiNG CLI Reference Guide
14.1.12 stateful-packet-inspection-12
firewall-policy
Enables layer 2 firewall stateful packet inspection
Supported in the following platforms:
 AP300
 AP621
 AP650
 AP6511
 AP6521
 AP6532
 AP71XX
 RFS4000
 RFS6000
 RFS7000
 NX9000
 NX9500
Syntax
stateful-packet-inspection-l2
Parameters
None
Examples
rfs7000-37FABE(config-fw-policy-test)#stateful-packet-inspection-l2
rfs7000-37FABE(config-fw-policy-test)#
Related Commands
noResets values or disables layer 2 stateful packet inspection commands
    Add page 873 to Favourites
    image text
    Enable zoom 
    							FIREWALL-POLICY 14 - 31
14.1.13 storm-control
firewall-policy
Storm control limits multicast, unicast and broadcast frames accepted and forwarded by a device. Messages are logged 
based on their severity level
Supported in the following platforms:
 AP300
 AP621
 AP650
 AP6511
 AP6521
 AP6532
 AP71XX
 RFS4000
 RFS6000
 RFS7000
 NX9000
 NX9500
Syntax
storm-control [arp|broadcast|multicast|unicast]
storm-control [arp|broadcast|multicast|unicast] [level|log]
storm-control [arp|broadcast|multicast|unicast] level  [fe |
ge |port-channel |up1|wlan ]
storm-control [arp|broadcast|multicast|unicast] log [|alerts|critical|
debugging|emergencies|errors|informational|none|notifications|warnings]
Parameters
• storm-control [arp|broadcast|multicast|unicast] level  [fe |
ge |port-channel |up1|wlan ]
arp Configures storm control for ARP packets
broadcast Configures storm control for broadcast packets
multicast Configures storm control for multicast packets
unicast Configures storm control for unicast packets
level  Configures the allowed number of packets received per second before storm control 
begins
  – Sets the number of packets received per second
fe  Sets the FastEthernet port for storm control from 1 - 4
ge  Sets the GigabitEthernet port for storm control from 1 - 8
port-channel  Sets the port channel for storm control from 1- 8
    Add page 874 to Favourites
    image text
    Enable zoom 
    							14 - 32 WiNG CLI Reference Guide
• storm-control [arp|bcast|multicast|unicast] log [|alerts|critical|
debugging|emergencies|errors|informational|none|notifications|warnings]
Examples
rfs7000-37FABE(config-fw-policy-test)#storm-control arp log warning
rfs7000-37FABE(config-fw-policy-test)#storm-control broadcast level 20000 ge 4
rfs7000-37FABE(config-fw-policy-test)#show context
firewall-policy test
 ip dos fraggle drop-only
 no ip dos tcp-sequence-past-window
 ip dos tcp-max-incomplete high 600
 ip dos tcp-max-incomplete low 60
 storm-control broadcast level 20000 ge 4
 storm-control arp log warnings
 ip-mac conflict drop-only
 ip-mac routing conflict log-and-drop log-level notifications
 flow timeout icmp 16000
 flow timeout udp 10000
 flow timeout tcp established 1500
 flow timeout other 16000
 dhcp-offer-convert
 logging icmp-packet-drop rate-limited
 logging malformed-packet-drop all
 logging verbose
 dns-snoop entry-timeout 35
up1 Sets the uplink interface
wlan  Configures the WLAN
  – Sets the WLAN ID for the storm control configuration
arp Configures storm control for ARP packets
broadcast Configures storm control for broadcast packets
multicast Configures storm control for multicast packets
unicast Configures storm control for unicast packets
log Configures the storm control log level for storm control events
 Sets the numeric logging level from 0 - 7
alerts Numerical severity 1. Indicates a condition where immediate action is required
critical Numerical severity 2. Indicates a critical condition
debugging Numerical severity 7. Debugging messages
emergencies Numerical severity 0. System is unusable
errors Numerical severity 3. Indicates an error condition
informational Numerical severity 6. Indicates a informational condition
none Disables storm control logging
notification Numerical severity 5. Indicates a normal but significant condition
warnings Numerical severity 4. Indicates a warning condition
    Add page 875 to Favourites
    image text
    Enable zoom 
    							FIREWALL-POLICY 14 - 33
Related Commands
noResets values or disables storm control commands
    Add page 876 to Favourites
    image text
    Enable zoom 
    							14 - 34 WiNG CLI Reference Guide
14.1.14 virtual-defragmentation 
firewall-policy
Enables the virtual defragmentation of IPv4 packets. This parameter is required for optimal firewall functionality.
Supported in the following platforms:
 AP300
 AP621
 AP650
 AP6511
 AP6521
 AP6532
 AP71XX
 RFS4000
 RFS6000
 RFS7000
 NX9000
 NX9500
Syntax
virtual-defragmentation {maximum-defragmentation-per-host |
maximum-fragments-per-datagram |minimum-first-fragment-length }
Parameters
• virtual-defragmentation {maximum-defragmentation-per-host |
maximum-fragments-per-datagram |minimum-first-fragment-length }
Examples
rfs7000-37FABE(config-fw-policy-test)#virtual-defragmentation maximum-fragments-per-
datagram 10
rfs7000-37FABE(config-fw-policy-test)#virtual-defragmentation minimum-first-
fragment-length 100
rfs7000-37FABE(config-fw-policy-test)#
Related Commands
maximum-defragmentation-per-
host Optional. Defines the maximum active IPv4 defragmentation per host
  – Sets a value from 1 - 16384
maximum-fragments-per-
datagram Optional. Defines the maximum IPv4 fragments per datagram
  – Sets a value from 2 - 8129
minimum-first-fragment-length 
Optional. Defines the minimum length required for the first IPv4 fragment
  – Sets a value from 8 - 1500
noResets values or disables virtual defragmentation commands
    Add page 877 to Favourites
    image text
    Enable zoom 
    							CHAPTER 15 IGMP-SNOOP-POLICY
This chapter summarizes IGMP snoop policy commands within the CLI structure.
Internet Group Management Protocol (IGMP) is a protocol used by hosts to manage their dynamic multicasting group 
memberships. IP multicasting allows the simultaneous transmission of IP datagram to a group of hosts defined by a single 
destination IP address. A datagram is delivered to all the members of the host group with the “best-effort” reliability. This 
means the datagram is not guaranteed to arrive at all members of the destination host group, or can arrive out of order 
with respect to other datagram.
The membership of a host group is dynamic where each member can join or leave the group anytime. Membership to a 
host group can be restricted to only those devices with the correct private key to access the multicast stream.
IGMP snooping is the process of listening in on IGMP network traffic. This feature allows the wireless controller to listen 
to IGMP traffic between the host device and the router. This enables the wireless controller to create a map of links and 
their multicast subscriptions. This information is used to filter out multicast transmissions to those links that are not 
subscribed to the multicast streams.
Use the (config) instance to configure IGMP snoop policy commands. To navigate to the 
config-igmp-snoop-policy instance, use the following commands:
RFSSwitch#igmp-snoop-policy 
rfs7000-37FABE(config)#igmp-snoop-policy test
rfs7000-37FABE(config-igmp-snoop-policy-test)#?
  igmp-snooping          Enable IGMP snooping
  no                     Negate a command or set its defaults
  querier                Configure IGMP querier
  robustness-variable    Configure IGMP Robustness Variable
  unknown-multicast-fwd  Forward Unknown Multicast Packet
  clrscr                 Clears the display screen
  commit                 Commit all changes made in this session
  do                     Run commands from Exec mode
  end                    End current mode and change to EXEC mode
  exit                   End current mode and down to previous mode
  help                   Description of the interactive help system
  revert                 Revert changes
  service                Service Commands
  show                   Show running system information
  write                  Write running configuration to memory or terminal
rfs7000-37FABE(config-igmp-snoop-policy-test)#
    Add page 878 to Favourites
    image text
    Enable zoom 
    							15 - 2 WiNG CLI Reference Guide
15.1 igmp-snoop-policy
Table 15.1 summarizes IGMP snoop policy commands
Table 15.1IGMP Snoop Policy Commands
Command Description Reference
igmp-snoopingEnables IGMP snoopingpage 15-3
noNegates a command or sets its default value page 15-4
querierConfigures an IGMP querierpage 15-6
robustness-variableConfigures an IGMP robustness variablepage 15-7
unknown-multicast-
fwdForwards unknown multicast packetspage 15-8
clrscrClears the display screenpage 5-4
commitCommits (saves) changes made in the current sessionpage 5-3
doRuns commands from EXEC modepage 4-66
endEnds and exits the current mode and moves to the PRIV EXEC modepage 5-5
exitEnds the current mode and moves to the previous modepage 5-6
helpDisplays the interactive help systempage 5-7
revertReverts changes to their last saved configurationpage 5-13
serviceInvokes service commands to troubleshoot or debug 
(config-if) 
instance configurationspage 5-14
showDisplays running system informationpage 6-4
writeWrites information to memory or terminalpage 5-42
    Add page 879 to Favourites
    image text
    Enable zoom 
    							IGMP-SNOOP-POLICY 15 - 3
15.1.1 igmp-snooping
igmp-snoop-policy
Enables IGMP snooping on a wireless controller or AP
Supported in the following platforms:
 AP300
 AP621
 AP650
 AP6511
 AP6521
 AP6532
 AP71XX
 RFS4000
 RFS6000
 RFS7000
 NX9000
 NX9500
Syntax
igmp-snooping
Parameters
None
Examples
rfs7000-37FABE(config-igmp-snoop-policy-test)#igmp-snooping
rfs7000-37FABE(config-igmp-snoop-policy-test)#show context
igmp-snoop-policy test
 igmp-snooping
 no querier
 unknown-multicast-fwd
Related Commands
noResets values or disables IGMP snooping
    Add page 880 to Favourites
    image text
    Enable zoom 
    							15 - 4 WiNG CLI Reference Guide
15.1.2 no
igmp-snoop-policy
Negates a command or sets its default
Supported in the following platforms:
 AP300
 AP621
 AP650
 AP6511
 AP6521
 AP6532
 AP71XX
 RFS4000
 RFS6000
 RFS7000
 NX9000
 NX9500
Syntax
no  [igmp-snooping|robustness-variable|unknown-multicast-fwd]
no querier {query-interval}
Parameters
• no [igmp-snooping|robustness-variable|unknown-multicast-fwd]
• no querier {query-interval}
Examples
rfs7000-37FABE(config-igmp-snoop-policy-test)#show context
igmp-snoop-policy test
 querier query-interval 1000
 robustness-variable 5
 igmp-snooping
 querier
 unknown-multicast-fwd
rfs7000-37FABE(config-igmp-snoop-policy-test)#no robustness-value
rfs7000-37FABE(config-igmp-snoop-policy-test)#no query-interval
rfs7000-37FABE(config-igmp-snoop-policy-test)#no unknown-multicast-fwd
rfs7000-37FABE(config-igmp-snoop-policy-test)#show context
igmp-snoop-policy test
 igmp-snooping
 querier
 no unknown-multicast-fwd
no igmp-snooping Disable IGMP snooping on a device
robustness-variable Disables the robustness variable on a device
unknown-multicast-fwd Disables unknown multicast forwarding on a device
no querier Disables this device from being an IGMP querier
query-interval Resets the IGMP querier query interval
    All Motorola manuals Comments (0)