Home > Motorola > Wireless > Motorola Wing 5 Manual

Motorola Wing 5 Manual

Add to Favourites
    Download as PDF Print this page Share this page

    Have a look at the manual Motorola Wing 5 Manual online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 249 Motorola manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.

    View all the pages
    Page
    of 1128
    Add page 311 to Favourites
    image text
    Enable zoom 
    							GLOBAL CONFIGURATION COMMANDS 4 - 145
4.1.39.2.9  no
rf-domain-mode
Negates a command or reverts configured settings to their default. When used in the config RF Domain mode, the no 
command negates or reverts RF Domain settings.
Supported in the following platforms:
 AP300
 AP621
 AP650
 AP6511
 AP6521
 AP6532
 AP71XX
 RFS4000
 RFS6000
 RFS7000
 NX9000
 NX9500
Syntax
no [channel-list|contact|control-vlan|country-code|dhcp-redundancy|layout|location|
mac-name|override-smartrf|override-wlan|sensor-server|stats|timezone|use]
Parameters
• no [channel-list|contact|control-vlan|country-code|dhcp-redundancy|layout|
location|mac-name|override-smartrf|override-wlan|sensor-server|stats|timezone|
use]
no channel-list Removes the channel list for 2.4GHz and 5GHz bands. Also disables dynamic update 
of a channel list
no contact Removes contact details configured
no control-vlan Removes VLAN configured for controlling traffic
no country-code Removes the country of operation configured
no dhcp-redundancy Removes DHCP redundancy
no layout Removes the RF Domain layout details
no location Removes the RF Domain location details
no mac-name Removes the MAC address to name mapping
no override-smartrf Resets the override Smart RF settings to default
no override-wlan Resets the override WLAN settings to default
no sensor-server Disables a AirDefense sensor server details
no stats Resets RF Domain stats settings
    Add page 312 to Favourites
    image text
    Enable zoom 
    							4 - 146 WiNG CLI Reference Guide
Examples
rfs7000-37FABE(config-rf-domain-default)#mac-name 11-22-33-44-55-66 TestDevice
rfs7000-37FABE(config-rf-domain-default)#
rfs7000-37FABE(config-rf-domain-default)#show context
rf-domain default
 location SanJose
 no country-code
 mac-name 11-22-33-44-55-66 TestDevice
rfs7000-37FABE(config-rf-domain-default)#
Related Commands
no timezone Removes the RF Domain’s time zone
no use Resets RF Domain profile settings
channel-listConfigures the channel list advertised by radios, and enables dynamic update of channel 
lists
contactConfigures details of the person to contact (or the administrator) in case of any problems 
or issues impacting the RF Domain
control-vlanConfigures a VLAN for traffic control
country-codeConfigures a RF Domain’s country of operation
dhcp-redundancyEnables a RF Domain’s DHCP redundancy
layoutConfigures a RF Domain’s layout maps
locationConfigures a RF Domain’s deployment location
mac-nameConfigures a relevant name for each MAC address
override-smart-rfConfigures RF Domain level overrides for Smart RF
override-wlanConfigures RF Domain level overrides for WLAN
sensor-serverConfigures a AirDefense sensor server
statsConfigures RF Domain stats settings
timezoneConfigures a RF Domain’s geographic time zone
useEnables the use of a Smart RF and/or WIPS policy
    Add page 313 to Favourites
    image text
    Enable zoom 
    							GLOBAL CONFIGURATION COMMANDS 4 - 147
4.1.39.2.10 override-smart-rf
rf-domain-mode
Configures RF Domain level overrides for a Smart RF policy
Supported in the following platforms:
 AP300
 AP621
 AP650
 AP6511
 AP6521
 AP6532
 AP71XX
 RFS4000
 RFS6000
 RFS7000
 NX9000
 NX9500
Syntax
override-smartrf channel-list [2.4GHz|5GHZ] 
Parameters
• override-smartrf channel-list [2.4GHz|5GHZ] 
Examples
rfs7000-37FABE(config-rf-domain-default)#override-smartrf channel-list 2.4GHz 1
,2,3
rfs7000-37FABE(config-rf-domain-default)#
rfs7000-37FABE(config-rf-domain-default)#show context
rf-domain default
 location SanJose
 no country-code
 override-smartrf channel-list 2.4GHz 1,2,3
 mac-name 11-22-33-44-55-66 TestDevice
rfs7000-37FABE(config-rf-domain-default)#
Related Commands
override-smartrf Configures RF Domain level overrides for a Smart RF policy
channel-list Enables the selection of a channel list for a Smart RF policy
2.4GHz  Selects the 2.4GHz band
  – Specify a list of channels separated by commas.
5GHz  Selects the 5GHz band
  – Specify a list of channels separated by commas.
noResets the override Smart RF settings its default
    Add page 314 to Favourites
    image text
    Enable zoom 
    							4 - 148 WiNG CLI Reference Guide
4.1.39.2.11 override-wlan
rf-domain-mode
Configures RF Domain level overrides for a WLAN
Supported in the following platforms:
 AP300
 AP621
 AP650
 AP6511
 AP6521
 AP6532
 AP71XX
 RFS4000
 RFS6000
 RFS7000
 NX9000
 NX9500
Syntax
overrides-wlan  [ssid|vlan-pool|wpa-wpa2-psk]
overrides-wlan  [ssid |vlan-pool  {limit}|wpa-wpa2-psk ]
Parameters
• overrides-wlan  [ssid |vlan-pool  {limit}|wpa-wpa2-psk ]
 Configures the WLAN name
The name should not exceed 32 characters and should represent the WLAN coverage 
area. After creating the WLAN, configure its override parameters.
ssid  Configures a override Service Set Identifier (SSID) associated with this WLAN
The SSID should not exceed 32 characters.
vlan-pool  limit Configures the override VLANs available to this WLAN
  – Specify the VLAN ID from 1 - 4094.
 limit – Optional. Sets a limit to the number of users on this VLAN. The maximum
client limit is 8192 per VLAN. The default is 0.
wpa-wpa2-psk  Configures the WPA-WPA2 key or passphrase for this WLAN
  – Specify a WPA-WPA2 key or passphrase.
    Add page 315 to Favourites
    image text
    Enable zoom 
    							GLOBAL CONFIGURATION COMMANDS 4 - 149
Examples
rfs7000-37FABE(config-rf-domain-default)#override-wlan test vlan-pool 2 limit 2
0
rfs7000-37FABE(config-rf-domain-default)#
rfs7000-37FABE(config-rf-domain-default)#show context
rf-domain default
 no country-code
 override-wlan test vlan-pool 2 limit 20
rfs7000-37FABE(config-rf-domain-default)#
Related Commands
noResets the override WLAN settings its default
    Add page 316 to Favourites
    image text
    Enable zoom 
    							4 - 150 WiNG CLI Reference Guide
4.1.39.2.12 sensor-server
rf-domain-mode
Configures a AirDefense sensor server on this RF Domain. Sensor servers allow network administrators to monitor and 
download data from multiple sensors remote locations using Ethernet TCP/IP or serial communications. This enables 
administrators to respond quickly to interferences and coverage problems.
Supported in the following platforms:
 AP300
 AP621
 AP650
 AP6511
 AP6521
 AP6532
 AP71XX
 RFS4000
 RFS6000
 RFS7000
 NX9000
 NX9500
Syntax
sensor-server  ip  port [443|8443|]
Parameters
• sensor-server  ip  port [443|8443|]
Sensor-server  Configures a AirDefense sensor server parameters
  – Select the server ID from 1 - 3. The server with the lowest defined ID is 
reached first by the wireless controller. The default is 1.
ip  Configures the (non DNS) IP address of the sensor server
  – Specify the IP address of the sensor server.
port [443|8443|] Configures the sensor server port. The options are:
 443 – Configures port 443, the default port used by the AirDefense server
 8843 – Configures port 883, the default port used by advanced WIPS on a wireless 
controller
  – Allows you to select a WIPS/AirDefense sensor server port from 
1 - 65535
    Add page 317 to Favourites
    image text
    Enable zoom 
    							GLOBAL CONFIGURATION COMMANDS 4 - 151
Examples
rfs7000-37FABE(config-rf-domain-default)#sensor-server 2 ip 172.16.10.3 port 44
3
rfs7000-37FABE(config-rf-domain-default)#
rfs7000-37FABE(config-rf-domain-default)#show context
rf-domain default
 no country-code
 sensor-server 2 ip 172.16.10.3
 override-wlan test vlan-pool 2 limit 20
rfs7000-37FABE(config-rf-domain-default)#
Related Commands
noDisables a AirDefense sensor server parameters
    Add page 318 to Favourites
    image text
    Enable zoom 
    							4 - 152 WiNG CLI Reference Guide
4.1.39.2.13 stats
rf-domain-mode
Configures stats settings that define how RF Domain statistics are updated
Supported in the following platforms:
 AP300
 AP621
 AP650
 AP6511
 AP6521
 AP6532
 AP71XX
 RFS4000
 RFS6000
 RFS7000
 NX9000
 NX9500
Syntax
stats [open-window|update-interval
stats open-window  {sample-interval [] {size []}}
stats update-interval [|auto]]
Parameters
• stats open-window  {sample-interval [] {size []}}
• stats update-interval [|auto]
stats Configures stats related settings on this RF Domain
open-window  Opens a stats window to get trending data
  – Configures a numerical index ID for this RF Domain statistics
sample-interval  Optional. Configures the interval at which the wireless controller captures statistics 
supporting this RF Domain
  – Specify the sample interval from 5 - 86640 seconds. The default is 5 
seconds.
size  Optional. After specifying the interval time you might specify the number of samples 
used by the wireless controller to define RF Domain statistics.
  – Specify the number of samples from 3 - 100. The default is 6 samples.
stats Configures stats related settings on this RF Domain
update-interval 
[|auto]Configures the interval at which RF Domain statistics are updated. The options are:
  – Specify an update interval from 5 - 300 seconds.
 auto – The RF Domain manager automatically adjusts the update interval based on 
the load.
    Add page 319 to Favourites
    image text
    Enable zoom 
    							GLOBAL CONFIGURATION COMMANDS 4 - 153
Examples
rfs7000-37FABE(config-rf-domain-default)#stats update-interval 200
rfs7000-37FABE(config-rf-domain-default)#
rfs7000-37FABE(config-rf-domain-default)*#show context
rf-domain default
 stats update-interval 200
 no country-code
 sensor-server 2 ip 172.16.10.3
 override-wlan test vlan-pool 2 limit 20
rfs7000-37FABE(config-rf-domain-default)*#
Related Commands
noResets stats related settings
    Add page 320 to Favourites
    image text
    Enable zoom 
    							4 - 154 WiNG CLI Reference Guide
4.1.39.2.14 timezone
rf-domain-mode
Configures the RF Domain’s geographic time zone. Configuring the time zone is essential for RF Domains deployed across 
different geographical locations.
Supported in the following platforms:
 AP300
 AP621
 AP650
 AP6511
 AP6521
 AP6532
 AP71XX
 RFS4000
 RFS6000
 RFS7000
 NX9000
 NX9500
Syntax
timezone 
Parameters
• timezone 
Examples
rfs7000-37FABE(config-rf-domain-default)#timezone America/Los_Angeles
rfs7000-37FABE(config-rf-domain-default)#
rfs7000-37FABE(config-rf-domain-default)#show context
rf-domain default
 timezone America/Los_Angeles
 stats update-interval 200
 no country-code
 use wips-policy WIPS1
 sensor-server 2 ip 172.16.10.3
 override-wlan test vlan-pool 2 limit 20
rfs7000-37FABE(config-rf-domain-default)#
Related Commands
time  Specify the RF Domain’s time zone.
noRemoves a RF Domain’s time zone
    All Motorola manuals Comments (0)